Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 169

Reformat results as: short short into frame detailed detailed into frame

_id	68cb
authors	Fenves, Stephen J. and Baker, Nelson C.
year	1987
title	Spatial and Functional Representation Language for Structural Design
source	21 p. : ill. Pittsburgh: Engineering Design Research Center, CMU, December, 1987. includes bibliography
summary	Knowledge-based systems for structural design developed to date have used simple geometric representations which have not provided adequate spatial reasoning. Shape grammars are suggested as a representation for a knowledge-based system capable of performing spatial and functional reasoning. The representation needs to serve all disciplines involved in the design process, where different semantics of each discipline are associated with the same spatial information about design objects. The representation is demonstrated in the building design environment, where possible structural systems can be generated dependent upon the building's spatial layout
keywords	representation, shape grammars, structures, design, problem solving, planning, civil engineering, architecture
series	CADline
last changed	2003/06/02 10:24

_id	0a09
authors	Akin, O., Dave, B. and Pithavadian, S.
year	1987
title	Problem Structuring in Architectural Design
source	February, 1987. [4], 15 p. : ill. includes bibliography
summary	The purpose of this research is to describe in operational terms the process of problem structuring while solving spatial problems in architectural design. The designer's behavior is described in terms of problem structuring, when problem parameters are established or transformed, and in terms of problem solving when these parameters are satisfied in a design solution. As opposed to problem solving, the structuring of problems is an under-studied but crucial aspect of complex tasks such as design. This work is based on observations derived from verbal protocol studies. To consider various levels of skill, the research subjects range from professional architects to novice designers. Subjects are given space planning problems which require them to develop solutions in accordance with individually established constraints and criteria, the majority of which are not explicit stated in the problem description. Based on the results of the protocol analysis, a framework is developed which explains how information processing characteristics, problem structure and different levels of expertise interact to influence the designer behavior
keywords	architecture, design process, problem solving, protocol analysis, problem definition
series	CADline
email
last changed	2003/05/17 10:09

_id	ae05
authors	Akin, Omer
year	1987
title	Expertise of the Architect
source	November, 1987. [13] p. unevenly numbered : ill. includes bibliography
summary	One of the areas where the expertise of the seasoned architect comes out is in the initial structuring of design problems. During problem structuring the parameters and processes used in design are defined. Experienced architects modify these parameters both in global and local levels as a function of the success of their research process. Experienced architects also rely on 'scenarios' acquired through pervious experiences with similar problems to initialize their problem structures or to redefined them
keywords	design, architecture, methods
series	CADline
email
last changed	2003/05/17 10:09

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	4d3b
authors	Archea, John
year	1987
title	Puzzle-Making : What Architects Do When No One is Looking
source	New York: Wiley-Interscience, 1987. pp. 37-52. includes bibliography
summary	The thesis of this paper is that architects work in a manner that is antithetical to problem-solving because they cannot explicate desired effects prior to their realization through the design process. In an attempt to clarify architecture's uncommon mode of action the author suggests that instead of specifying what they are trying to accomplish prior to their attempts to accomplish it as problem-solver do, architects treat design as a search for the most appropriate effects that can be attained in a unique context. They seek sets of combinatorial rules that will result in an internally consistent fit between a kit of parts and the effects that are achieved when those parts are assembled in a certain way
keywords	puzzle making, problem solving, architecture, design process
series	CADline
last changed	1999/02/12 15:07

_id	e820
authors	Armstrong, W.W., Green, M. and Lake, R.
year	1987
title	Near- Real-Time Control of Human Figure Models
source	IEEE Computer Graphics and Applications. June, 1987. vol. 7: pp. 52-60 : ill
summary	Includes bibliography. Animating human figures is one of the major problems in computer animation. A recent approach is the use of dynamic analysis to compute the movement of a human figure, given the forces and torques operating within and upon the body. One of the problems with this technique is computing the forces and torques required for particular motions: this has been called the control problem of dynamic analysis. To develop a better understanding of this problem, an interactive interface to a dynamics package has been produced. This interface, along with a collection of low-level motion processes, can be used to control the motion of a human figure model. This article describes both the user interface and the motion processes, along with experiences with this approach
keywords	computer graphics, animation, user interface
series	CADline
last changed	2003/06/02 14:41

_id	8eb4
authors	Athithan, G. and Patnaik, L.M.
year	1987
title	Geometric Searching In Extended CSG Models : Application to Solid Modeling and Viewing
source	February, 1987. 30 p. : ill
summary	In this paper, the CSG representation scheme is augmented with the 'cartesian product.' The sweep method of generating solids is encompassed by this 'Extended CSG' formalism. The point inclusion problem encountered in the area of geometric searching in computational geometry is discussed in the context to solid models represented by 'extended CSG.' A simple algorithm to solve it that has a time complexity O(n), where n is the number of primitives, is presented. Allowing for preprocessing and extra storage, a second efficient algorithm, having a time complexity O(log n), is developed. The relevance of point inclusion problem in solid modelling techniques is indicated. An extended CSG based solid modeling method is proposed. A solution to the problem of hidden line removal, that uses the faster algorithm for the point inclusion problem, is also presented in the paper
keywords	point inclusion, computational geometry, data structures, solid modeling, CSG, computer graphics, hidden lines
series	CADline
last changed	2003/06/02 14:41

_id	266d
authors	Badler, Norman I., Manoochehri, Kamran H. and Walters, Graham
year	1987
title	Articulated Figure Positioning by Multiple Constraints
source	IEEE Computer Graphics and Applications. June, 1987. vol. 7: pp. 28-38 : ill. Includes bibliography
summary	A problem that arises in positioning an articulated figures is the solution of 3D joint positions (kinematics), when joint angles are given. If more than one such goal is to be achieved, the problem is often solved interactively by positioning or solving one component of the linkage, then adjusting another, then redoing the first, and so on. This iterative process is slow and tedious. The authors present a method that automatically solves multiple simultaneous joint position goals. The user interface offers a six-degree-of freedom input device to specify joint angles and goal positions interactively. Examples are used to demonstrate the power and efficiency of this method for key-position animation
keywords	animation, constraints, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	05c2
authors	Balachandran, M. B. and Gero, John S.
year	1987
title	Use of Knowledge in Selection and Control of Optimization Algorithms
source	engineering Optimization. 1987. vol. 12: pp. 163-173
summary	Computers have been widely used in optimization based problem solving processes to assist with the numerical computations. The widespread availability of symbolic computational tools and recent developments in artificial intelligence now make it feasible to expand the role of computers in this area. Various classes of knowledge used to improve the efficiency of the optimization processes are presented in this paper. A prototype system developed in the domain of multicriteria decision making is demonstrated. The system contains knowledge needed to select appropriate optimization algorithms, to control the solution process, and to select alternate algorithms if needed
keywords	multicriteria, algorithms, knowledge base, systems, problem solving, optimization
series	CADline
email
last changed	2003/06/02 13:58

_id	409f
authors	Becker, Joseph D.
year	1987
title	Arabic Word Processing
source	communications of the ACM. July, 1987. vol. 30: pp. 600-610 : ill. includes bibliography
summary	The technology of word processing in the Middle East recently developed a word processing software that can correctly format the cursive, interacting letters of the Arabic script. Moreover, new layout procedures can automatically intermix right-to-left Arabic or Hebrew writing with left-to-right text in European or other languages. The design presented in this article is embodied in the Xerox View Point Documenter, but its principles apply equally well to any Arabic desktop publishing
keywords	software, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	efb2
authors	Blinn, James F.
year	1987
title	Platonic Solids
source	IEEE Computer Graphics and Applications. November, 1987. vol. 7: pp. 62-66 : ill
summary	The problem in constructing Platonic Solids is to find explicit coordinates for the vertices. The article describes how to find orientations that allow the vertex coordinates to be as simple as possible
keywords	computer graphics, geometric modeling, algorithms
series	CADline
last changed	2003/06/02 13:58

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e861
authors	Burnham, G.T.
year	1987
title	Microcomputer-Based Expert System for the Design of Operational Military Airfields
source	Department of Architectural Science, University of Sydney
summary	This thesis develops a number of prototypical expert systems on a microcomputer to assist the military designer or engineer with facets of military operational airfield design. An existing expert system shell BUILD written in PROLOG-1 was altered to provide a more permanent record of the results of the system execution. The individual knowledge base includes production rules which conform to the BUILD syntax requirements. A number of additional clauses related to the knowledge base are written in PROLOG-1. The expert system consists of some 200 rules and an additional 36 clauses. The rules contain knowledge on soil characteristics pertinent to airfields, factors involved in calculating lengths of runways and factors for determining the effort involved in construction. The knowledge for the expert systems was gathered from a combination of civilian and military literature sources, the author's own experience, and discussions with military and air force personnel currently engaged in the design, planning and construction of these facilities. Development of these prototypical expert systems demonstrates the feasibility of implementing expert systems on microcomputers in this domain. Furthermore, it demonstrates their possible application to military engineering design particularly where the design process relies on a large amount of tabulated data and heuristic knowledge. It is this type of knowledge that is often used by the military engineer to find a timely problem solution when provided with a range of options. [Unpublished. -- CADLINE has abstract only.]
keywords	Applications, Military Engineering, Expert Systems, Design, Planning
series	thesis:MSc
last changed	2002/12/14 19:15

_id	ascaad2006_paper20
id	ascaad2006_paper20
authors	Chougui, Ali
year	2006
title	The Digital Design Process: reflections on architectural design positions on complexity and CAAD
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	These instructions are intended to guide contributors to the Second Architecture is presently engaged in an impatient search for solutions to critical questions about the nature and the identity of the discipline, and digital technology is a key agent for prevailing innovations in architectural design. The problem of complexity underlies all design problems. With the advent of CAD however, Architect’s ability to truly represent complexity has increased considerably. Another source that provides information about dealing with complexity is architectural theory. As Rowe (1987) states, architectural theory constitutes “a corpus of principles that are agreed upon and therefore worthy of emulation”. Architectural theory often is a mixed reflection on the nature of architectural design, design processes, made in descriptive and prescriptive terms (see Kruft 1985). Complexity is obviously not a new issue in architectural theory. Since it is an inherent characteristic of design problems, it has been dealt with in many different ways throughout history. Contemporary architects incorporate the computer in their design process. They produce architecture that is generated by the use of particle systems, simulation software, animation software, but also the more standard modelling tools. The architects reflect on the impact of the computer in their theories, and display changes in style by using information modelling techniques that have become versatile enough to encompass the complexity of information in the architectural design process. In this way, architectural style and theory can provide directions to further develop CAD. Most notable is the acceptance of complexity as a given fact, not as a phenomenon to oppose in systems of organization, but as a structuring principle to begin with. No matter what information modelling paradigm is used, complex and huge amounts of information need to be processed by designers. A key aspect in the combination of CAD, complexity, and architectural design is the role of the design representation. The way the design is presented and perceived during the design process is instrumental to understanding the design task. More architects are trying to reformulate this working of the representation. The intention of this paper is to present and discuss the current state of the art in architectural design positions on complexity and CAAD, and to reflect in particular on the role of digital design representations in this discussion. We also try to investigate how complexity can be dealt with, by looking at architects, in particular their styles and theories. The way architects use digital media and graphic representations can be informative how units of information can be formed and used in the design process. A case study is a concrete architect’s design processes such as Peter Eisenman Rem Koolhaas, van Berkel, Lynn, and Franke gehry, who embrace complexity and make it a focus point in their design, Rather than viewing it as problematic issue, by using computer as an indispensable instrument in their approaches.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ec19
authors	Dhar, Vasant and Pople, Harry E.
year	1987
title	Rule-Based Versus Structure- Base Models for Explaining Generating Expert Behavior
source	Communications of the ACM. June, 1987. vol. 30: pp. 542-554 : ill. includes bibliography
summary	Flexible representations are required in order to understand and generate expert behavior. In this article the authors argue for a representation that contains partial model components that are synthesized into qualitative models containing entities and relationships relevant to the domain. The model components can be replaced and arranged in response to changes in the task environment. The authors have found this 'model constructor' to be useful in synthesizing models that explain and generate expert behavior, and have explored its ability to support decision making in the problem domain of business resource planning, where reasoning is based on models that evolve in response to changing external conditions or internal policies
keywords	AI, cognition, modeling, expert systems, knowledge base, representation
series	CADline
last changed	2003/06/02 13:58

_id	801f
authors	Galle, Per
year	1987
title	Branch & Sample : Systematic Combinatorial Search without Optimization
source	73 p. 1987. DIKU Research Report No. 87/5. CADLINE has abstract only
summary	Many constraint satisfaction problems are combinatorically explosive, i.e. have far too many solutions. Optimization techniques may help in selecting solutions for consideration, but a reasonable measure of optimality is not always at hand. The branch & sample algorithm is presented as an alternative to optimization. If the constraints themselves limit the solution set sufficiently, the algorithm finds all solutions, but otherwise a suitable number of solutions (determined by the user) is generated, such that each new solution has a maximal distance to those already generated. The distance measure used is a so called ultrametric distance expressible in terms of the search tree: solutions are viewed as m-tuples of fixed length, each of whose m decision variables corresponds to a level in the search tree. The distance between two solutions is the number of edges from their leaf nodes to the closest common predecessor node in the tree. For problems whose decision variables depend on each other (as is often the case) the set of solutions generated in this way corresponds well to the intuitive notion of a 'representative sample.' The principles of Branch & Sample are first introduced informally, then the algorithm is developed by stepwise refinement, and two examples of its use are given. A fully tested application-independent implementation of the algorithm in C is given as an appendix
keywords	algorithms, combinatorics, search, constraints, floor plans, layout, synthesis, architecture
series	CADline
last changed	1999/02/12 15:08

_id	a7c1
authors	Galle, Per
year	1987
title	A Basic Problem Definition Language for Automated Floor Plan Design
source	113 p. 1987. DIKU Research Report No. 87/4
summary	CADLINE has abstract only. Algorithms for automated floor plan design need a machine- readable description of properties of the desired floor plans. In this report BPDL ('Basic Problem Definition Language'), a rudimentary language for stating such descriptions, is developed. The development is based on a discussion of pragmatic aspects of possible features of the language. The resulting language is described by formal definitions of syntax and semantics, accompanied by informal explanations. Finally, experiments with a floor plan design algorithm that supports BPDL are reported and it is concluded that even a rudimentary language like BPDL can describe relatively non- trivial floor plan layouts, provided a set of geometrical primitives, attributes and relations that make up the language are carefully chosen. Further research along the lines of BPDL is suggested, and the importance of a systematic approach to development of future specification languages for architectural design is stressed
keywords	architecture, floor plans, design, attributes, relations, semantics, algorithms, synthesis, planning, languages
series	CADline
last changed	1999/02/12 15:08

_id	2ac0
authors	Galle, Per
year	1987
title	A Formalized Concept of Sketching in Automated Floor Plan Design
source	177 p. 1987. DIKO Research Report No.87/3
summary	CADLINE has abstract only. Automated floor plan design, though originally motivated by the difficulties encountered by architects manually designing building layouts, raise several questions that may be of relevance to related application areas as well. e.g. design of electronic circuitry. One such question is, 'how do we come from a given set of constraints on size and placement of rooms (components) to a set of floor plans (circuit layouts) that satisfy these constraints?' In manual architectural design, sketches are used as an intermediate step. The present work is a study of a number of formalizations of the sketch concept which have been or could be used in computer- generation of architectural floor plans. A particular type of sketch, called the 'delta-derivative', is suggested and developed. The delta-derivative of a desired solution plan is an approximation of that solution plan and usually several other similar or 'equivalent' solutions. The idea is to generate sketches ('abstract' plans) before solutions ('concrete' plans), because they are simpler to compute, weeding out sketches that are not 'promising', and trying to refine the remaining sketches into solutions proper, thus limiting the amount of combinatorial search. Several abstraction levels of sketches may be used in this process. However, constraints as specified by the user of an automated design system are assumed to apply to the solutions; therefore a major theoretical problem which is addressed in the report is the derivation of sketch-level constraints that define which sketches to be generated. A comprehensive floor plan design system based on these ideas has been implemented, and empirical results are reported which confirms certain predicted advantages of delta-derivatives but also shows that the sketch-level constraints based on the developed theory are too weak if used alone; they allow generation of too many sketches which cannot possibly be refined into solutions. The report finally conjectures a solution to this problem
keywords	CAD, planning, architecture, floor plans, design, combinatorics, programming, abstraction
series	CADline
last changed	1999/02/12 15:08

_id	448b
authors	Gerzso, Miguel J.
year	1987
title	On the Reasons for Designing an Object Based Language Called TM
source	1987. 7 p. : ill. includes bibliography
summary	One of the most basic problems in attempting to use computers for architectural applications has been the generation of design alternatives. In order to approach this problem, it is claimed in the paper that in reality it is two basic problems: a methodological problem and a data and procedural representation problem. Diagrammatic Production Rules (DPR's), developed previously by the author, have been proposed for dealing with methodological problem and TM, an object based language, is proposed in the paper for dealing with the data and procedural representation problem. An example of a DPR and a 'program' in TM are included to illustrate the relationship between the two
keywords	languages, representation, OOPS, CAD, applications, programming, architecture, synthesis, design
series	CADline
last changed	2003/06/02 13:58

_id	e60d
authors	Gross, Mark D., Ervin, Stephen M. and Anderson, James (et al)
year	1987
title	Designing with Constraints
source	John Wiley & Sons, 1987. pp. 53-83. includes bibliography
summary	The constraint model of designing provides a means of demonstrating and exploring the computability of design. Designing is understood as a process of incrementally defining an initially ill-defined question, and concurrently proposing and testing possible answers. That is, not finding THE solution to A problem, but finding A solution to THE problem. Articulating (including inventing and modifying) the question, and exploring possible alternative answers (or designs), are two fundamental activities which can be supported by computers and the constraint model. The authors discuss the use of constraints to explicate design questions, circumscribe feasible regions and specify proposed solutions, and examine the processes of search and scrutiny within a region. Naming, solving history-keeping, block-structuring, identifying and resolving conflicts are among tasks identified that can be rendered to a computer. Questions of knowledge representation and inference making with ambiguity and imprecision are discussed. Examples of the application of the constraint model to design problems in architecture and site planning are illustrated by brief scenarios
keywords	constraints, design process, search, knowledge
series	CADline
last changed	2003/06/02 10:24

For more results click below: