Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 138

Reformat results as: short short into frame detailed detailed into frame

_id	c6d5
authors	Balachandran, M.B.
year	1988
title	A Model for Knowledge-Based Design Optimization [PhD dissertation]
source	Dept. of Architectural Science, University of Sydney
summary	Unpublished. CADLINE has abstract only. This dissertation is concerned with developments in design decision methodologies applied to computer-aided design. The major aim of this research was to design and develop a knowledge-based computer-aided optimization system that has the ability to emulate some of the human performances in design decision processes. The issues and problems involved in developing a knowledge-based system for design optimization are addressed. A knowledge-based methodology to aid design optimization formulation is investigated. The major issues considered include representation of design description, the variety of knowledge required for the formulation process, recognizing optimization formulations, and selection of appropriate algorithms. It is demonstrated that the knowledge-based control of numerical processes leads to efficient and improved decisions in design. In developing knowledge-based systems for computer-aided decision applications an effective human-machine interface is essential. A model for knowledge-based graphical interfaces is proposed. This model incorporates knowledge for graphics interpretation, extraction of features of graphics objects and identification of prototypical objects. An experimental system developed in Prolog and C is demonstrated in the domain of structural design. The system shows one way of combining knowledge-based systems technology with computer graphics and indicates how knowledge-based interfaces improve the system's interactive capabilities. Finally, the system, OPTIMA, is presented. The system is designed as an integrated knowledge-based decision system using frames, rule bases, menu inputs, algebraic computation and optimization algorithms. The system has been written in LISP, Prolog and C and implemented on SUN Microsystems workstations. The performance of the system is demonstrated using two example problems from the domains of structural and architectural design respectively. The knowledge-based approach to design optimization is shown to be considerably easier and more efficient than those using conventional programs.
keywords	Knowledge Base, Systems, CAD, Representation, Design, Frames, Computer Graphics, User Interface, Decision Making
series	CADline
last changed	2003/06/02 13:58

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	8ac0
authors	Birmingham, William P., Gupta, Anurag P. and Siewiorek, Daniel P.
year	1988
title	The MICON System for Computer Design
source	11 p. : ill. Pittsburgh, PA: Engineering Design Research Center, CMU, November, 1988. EDRC 18-10-89. includes bibliography
summary	The MICON system is an integrated collection of programs which automatically synthesizes small computer systems from high level specifications. The system address multiple levels of design, from logical through physical, providing a rapid prototyping capability. Two programs form MICON's nucleus: a knowledge-based synthesis tool called M1; and, an automated knowledge acquisition tool named CGEN which is used to teach M1 how to design. Other tools in the MICON system are an integrated database and associated data management tools. The system is fully functional, having been used to generate working designs. This paper describes the architecture and operation of the MICON system
keywords	integrated circuits, electrical engineering, design, systems, automation, integration
series	CADline
last changed	2003/06/02 13:58

_id	0803
authors	Jabri, Marwan A. and Skellern, David J.
year	1988
title	Automatic Floorplan Design Using PIAF
source	August, 1988. 36 p. : ill. tables
summary	This paper presents PIAF (a Package for Intelligent and Algorithmic Floorplanning), developed at Sydney University Electrical Engineering (SUEE) for use in custom integrated circuit design. Floorplanning plays a crucial role in the design of custom integrated circuits. When design is approached in a top-down fashion, the function to be implemented on silicon is first decomposed in a conceptual phase into a Functional Block Diagram (FBD). This FBD has a 'blocks and buses' structure where blocks represent sub- functions and buses represent the interconnections that carry data and other information between blocks. The decomposition of the function into sub-functions is hierarchical and aims at reducing the complexity of the design problem. When the FBD is known, the floorplanning process may be performed. When this task is performed manually, the designer searches for a relative placement of the blocks and for an area and shape for each block to minimize the overall chip layout area while at the same time meeting design constraints such as design tool limitations, interconnection characteristics and technological design rules. PIAF is a knowledge-based system (KBS) that has been developed at SUEE during the last four years. It relies on a strategy that partitions the floorplanning task in a way that allows efficient use of heuristics and specialized design knowledge in the generation and pruning of the solution space. This paper presents the operation of PIAF and discusses several implementation issues including; KBS structure, knowledge representation, knowledge acquisition, current context memory design, design quality factors and explanation facility. This paper uses a running example to present the operation of each PIAF's KBS-based solving phases
keywords	knowledge, representation, knowledge acquisition, electrical engineering, design, integrated circuits, knowledge base, systems, layout, synthesis
series	CADline
last changed	2003/06/02 10:24

_id	8fb2
id	8fb2
authors	McCall, Raymond, Bennett, Patrick and Johnson, Erik
year	1994
title	An Overview of the PHIDIAS II HyperCAD System
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 63-74
doi	https://doi.org/10.52842/conf.acadia.1994.063
summary	The PHIDIAS II HyperCAD system combines the functionality of CAD graphics, hypermedia, database management and knowledge-based computation in a single, highly integrated design environment. The CAD functionality includes both 3-D and 2-D vector graphics. The hypermedia includes support for text, raster images, video and sound. The database management enables persistent storage and interlinking of large collections of text, images, video, sound and vector graphics, i.e., thousands of vector graphic objects and drawings in a single database. Retrieval is provided both through use of "associative indexing" based on hyperlinks and through use of an advanced query language. The knowledge- based computation includes both inference and knowledgebased critiquing. A highly unusual feature of PHIDIAS II is that it implements all of its functions using only hypermedia mechanisms. Complex vector graphic drawings and objects are represented as composite hypermedia nodes. Inference and critiquing are implemented through use of what are known as virtual structures [Halasz 1988], including virtual links and virtual nodes. These nodes and links are dynamic (computed) rather than static (constant). They are defined as expressions in the same language used for queries and are computed at display time. The implementation of different kinds of functions using a common set of mechanisms makes it easy to use them in combination, thus further augmenting the system's functionality. PHIDIAS supports design by informing architects as they develop a solution's form. The idea is thus not to make the design process faster or cheaper but rather to improve the quality of the things designed. We believe that architects can create better buildings for their users if they have better information. This includes information about buildings of given types, user populations, historical and modern precedents, local site and climate conditions, the urban and natural context and its historical development, as well as local, state and federal regulations.
series	ACADIA
last changed	2022/06/07 07:59

_id	0697
authors	Balachandran, M.B. and Gero, John S.
year	1988
title	Development of a Knowledge-Based System for Structural Optimization
source	Dordrecht: Kluwer, 1988. pp. 17-24
summary	Optimization is a useful and challenging activity in structural design. It provides designers with tools for better designs while saving time in the design process. The features of conventional optimization tools are presented and their limitations are outlined. The impact and role of knowledge-based methodologies in structural optimization processes is discussed. Structural optimization involves a number of tasks which require human expertise, and are traditionally assisted by human designers. These include design optimization formulation, problem recognition and the selection of appropriate algorithm(s). In this representation and processing of constraints are crucial tasks. This paper presents a framework for developing a knowledge-based system to accomplish these tasks. Based on the needs and the nature of the optimization process, a conceptual architecture of an integrated knowledge-based system is presented. The structure and functions of various components of the system are described
keywords	knowledge base, systems, integration, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	887e
authors	Belajcic, N. D.
year	1988
title	Computer Implementation of Shape Grammars
source	Department of Architectural Science, University of Sydney
summary	An approach is taken that shape grammars can be used as a possible vehicle for automated design generation. Historical background of shape grammars is discussed with emphasis on vocabulary/syntax aspect of the design process and significance of class solutions to problems. Similarities with expert system mechanics and structure is highlighted and advantages and disadvantages of rule-based and frame-based systems are considered. These concepts are implemented in a computer program written in LISP employing icon driven graphic interface with tools for creating shapes and rules. Finally, problems associated with adopted reasoning strategies are reported and areas of further development and improvement suggested. [UNPUBLISHED. CADLINE has abstract only]
keywords	Shape Grammars, Design Process
series	thesis:MSc
last changed	2002/12/14 19:10

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	c57b
authors	Bier, Eric A.
year	1988
title	Snap-Dragging. Interactive Geometric design in Two and Three Dimensions
source	University of California, Berkeley
summary	Graphic artists, mechanical designers, architects, animators, authors of technical papers and others create geometric designs (illustrations and solid models) as a major part of their daily efforts. Some part of this shape construction must be done with precision. For instance, certain line segments should be horizontal, parallel or congruent. In recent years, interactive computer programs have been used to speed up the production of precise geometric designs. These programs take advantage of high-speed graphics, equation solving, and computer input peripherals to reduce the time needed to describe point positions to the machine. Previous techniques include rounding the cursor to points on a rectangular grid, solving networks of constraints, and supporting step-by-step drafting-style constructions. Snap-dragging is a modification of the drafting approach that takes advantage of powerful workstations to reduce the time needed to make precise illustrations. Using a single gravity mapping, a cursor can be snapped to either points, lines or surface. The gravity algorithm achieves good performance by computing intersection points on the fly. To aid precise construction, a set of lines, circles, planes, and spheres, called alignment objects, are constructed by the system at a set of slopes, angles, and distances specified by the user. These alignments objects are constructed at each vertex or edge that the user has declared to be hot (of interest). Vertices and edges can also be made hot by the system through the action of an automatic hotness rule. When snap-dragging is used, shapes can often be constructed using a few more keystrokes than would be needed to sketch them freehand. Objects can be edited at arbitrary orientations and sizes. The number of primitive operations is small, making it possible to provide keyboard combinations for quickly activating most of these operations. The user interface works nearly identically in two or three dimensions. In three dimensions, snap-dragging works with a two-dimensional pointing device in a single perspective view.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c9e4
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1988
title	Automated knowledge Acquisition for a Computer Hardware Synthesis System
source	19 p. : ill. Engineering Design Research Center, CMU, June, 1988. EDRC 18-06-88. includes bibliography
summary	The MICON Synthesizer Version 1 (M1) is a rule-based system which produces a complete small computer design from a set of abstract specifications. The ability of M1 to produce designs depends on the encoding of large amounts of domain knowledge. An automated knowledge acquisition tool, CGEN, works symbiotically with M1 by gathering the knowledge required by M1. CGEN acquires knowledge about how to build and when to use various computer structures. This paper overviews the operation of CGEN by providing an example of the types of knowledge acquired and the mechanisms employed. A novel knowledge-intensive generalization scheme is presented. Generalization is a pragmatic necessity for knowledge acquisition in this domain. A series of experiments to test CGEN's capabilities are explained. A description of the architecture and knowledge-base of M1 is also provided
keywords	electrical engineering, automation, knowledge acquisition, knowledge base, systems
series	CADline
last changed	2003/06/02 13:58

_id	cf08
authors	Blaha, Michael R., Premerlani, William J. and Rumbaugh, James E.
year	1988
title	Relational Database Design Using An Object- Oriented Methodology
source	communications of the ACM. April, 1988. vol. 31: pp. 414-427 : ill. includes a short bibliography
summary	Object-oriented concepts provide a useful abstraction for relational database design. In this article the authors present a design technique that has been used for several projects at General Electric. The methodology is intuitive, expressive, and extensible. The new approach to relational database design is based on the work of Loomis, Sha, and Rumbaugh
keywords	relational database, design, methods, objects, modeling, representation
series	CADline
last changed	2003/06/02 13:58

_id	0ee6
authors	Boyle, R. and Thomas, R.
year	1988
title	Computer Vision: A First Course
source	Blackwell Scientific Publications
summary	Computer vision is a new discipline recently developed from image processing, which is able to take raw images, and, after suitable processing, derive information from them automatically. Computer vision applications are legion in the areas of automated manufacture and robotics, where it may be addressed to such problems as resolving motion in images, and 3-D analysis. This book is a much-needed introduction to the subject for senior undergraduates and graduates. It covers the necessary mathematical techniques at a level suitable for the mathematical literate who has not encountered any image processing before, and proceeds to an examination of some pure vision applications. There is a discussion of human perception and how it relates to machine perception, and there are examples throughout the text, with exercises at the end of each chapter. Table of Contents Perception A pattern recognition system Image acquisition and modelling Low level processing Segmentation A PCB example Line labelling Towards three dimensions Knowledge representation Rule based systemsl Epilogue Appendices.
series	other
last changed	2003/04/23 15:14

_id	5f4b
authors	Coyne, R.D.
year	1988
title	Logic Models of Design
source	Pitman, London
summary	This monograph places design in a theoretical context which applies developments in knowledge-based systems, logic programming and planning to design. It addresses two important design issues: the interpretation of designs, which concerns the discovery of implicit design attributes, a key activity in design evaluation that can be modelled by deductive inference in logic programming; and the process of generation, whereby a design description is produced which exhibits these implicit design attributes. Implicit attributes can be seen as analogous to the semantic content of natural language utterances. The work presented here is mainly concerned with design generation, and an operational model of design is investigated in which operations on processes are treated in a similar way to operations on form. It is argued that there are advantages in representing control knowledge as rules in a design system, and that logic is an effective medium for this purpose. This is demonstrated by means of programs developed in Prolog and C using the example of spatial layout in buildings. Primarily, this book is directed at those in artificial intelligence (AI) involved in logic programming, planning and expert systems. However, since AI techniques are finding widespread application in industry, the use of an architectural design example makes this work relevant to architects, designers, engineers and developers of intelligent architectural design software.
series	other
email
last changed	2003/04/23 15:14

_id	e1e2
authors	Danahy, John
year	1988
title	Engaging Intuitive Visual Thinking in Urban Design Modelling: A Real-Time Hypothesis
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 87-97
doi	https://doi.org/10.52842/conf.acadia.1988.087
summary	This paper will present prototypical software being used in the teaching of urban design to students and for use by professionals in the early stages of a project. The system is intended to support a heuristic approach to design. That is, it supports a process of refining ideas and understandings through a process of trial and error. The support or aid to design comes in the form of a didactic real-time programme. Its power lies in its ability to provide instantaneous response to operations on the data that can allow one to develop threedimensional spatial ideas in an intuitively driven manner. This condition appears to occur for both novice and expert computer operators. The presentation will present our experience to-date in using conventional computer graphic tools to represent design ideas and contrast it with a video demonstration of our prototypical dynamic urban design modelling software for the Silicon Graphics IRIS computers.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	6f1b
authors	De Floriani, Leila and Falcidieno, Bianca
year	1988
title	A Hierarchical Boundary Model for Solid Object Representation
source	ACM Transactions on Graphics. January, 1988. vol. 7: pp. 42-60 : ill. includes bibliography
summary	A new hierarchical model for solid object representation is described. This model, called a Hierarchical Face Adjacency Hypergraph (HFAH), is based on a relational description of the object boundary, called a Face Adjacency Hypergraph (FAH), which considers faces as the primary topological entities defining the object boundary. The HFAH consists of a hierarchy of FAHs describing the decomposition of the boundary of an object into form features. In this paper the HFAH is described together with its internal encoding structure. Two basic transformations, called refinement and abstraction, are defined on the hierarchical model; these allow effective and efficient modifications of the hierarchical boundary model
keywords	representation, computational geometry, solid modeling, algorithms, design, data structures, graphs, features, B-rep
series	CADline
last changed	2003/06/02 13:58

_id	4086
authors	Ervin, Stephen M.
year	1988
title	Computer-Aided Diagramming and the `Generator-Test' Cycle
source	1988. 22 p.: ill. includes bibliography
summary	Simon's `generator-test' model is both a metaphor and a literal prescription for the organization of computer systems for designing. In most approaches to computer-aided design, one side of the cycle - generating or testing - is reserved to the human designer, the other side delegated to the computer. A more comfortable and comprehensive approach is to support switching these roles between designer and computer. This approach underlies a prototype system for computer-aided diagramming, the CBD (Constraint-Based Diagrammer). Diagramming is an important design activity, especially in preliminary design, as diagrams play a pivotal role between graphic and symbolic knowledge. Diagrams as a medium of knowledge representation and as means of inference have an ambivalent status in the generator-test model; they may serve either purpose. Examination of CBD sheds some light on Simon's model and on the requirements for sharing generating and testing with computational design tools
keywords	problem solving, CAD, constraints, evaluation, synthesis
series	CADline
last changed	2003/06/02 13:58

_id	a62c
authors	Flemming, Ulrich, Coyne, Robert F. and Glavin, Timothy J. (et al)
year	1988
title	A Generative Expert System for the Design of Building Layouts -- Version 2
source	Artificial Intelligence in Engineering: Design. editor. John J. Gero. Elsevier (Computational Mechanics Publications), 1988. PP. 445-464 : ill. includes bibliography
summary	The paper describes an attempt to increase the intelligence of a CAD system by adding capabilities (1) to systematically enumerate alternative solutions to a design problem, and (2) to take, at the same time, a broad spectrum of criteria or concerns into account. These capabilities are intended to complement the designer's abilities and performance. In connection with such attempts, fundamental problems arise when the objects to be designed have shape and are located in space. These problems are identified, and an approach to solve them is outlined. This approach is currently being tested over a range of domains all of which deal with the design of layouts of rectangles subject to constraints and criteria. The search for alternatives takes place in a state space with properties that make it possible to systematically explore and evaluate the power of various search strategies or planning paradigms. The state space is established through a domain-independent generator, while the evaluation of points in that space is carried out by a domain-dependent tester built up through a process of knowledge acquisition familiar from work with expert systems
keywords	design, expert systems, CAD, enumeration, shape grammars,architecture, intelligence, synthesis, space allocation, layout, floor plans
series	CADline
email
last changed	2003/06/02 13:58

_id	diss_howe
id	diss_howe
authors	Howe, Alan Scott
year	1988
title	A new paradigm for life-cycle management of kit-of-parts building systems
source	UNIVERSITY OF MICHIGAN , PhD
summary	The research described in this dissertation brings together various technologies in manufacturing and information management and suggests a new paradigm for the design, manufacture, and lifetime use of artifacts using kit-of-parts systems and rule-based assembly. The questions are asked: If architects, designers, and users were given direct online connection to real-time design information sources and fabrication processes, and have the ability to monitor and control the current state of designed objects throughout the objects' lifetime, how would the entire life-cycle of a product be affected, and how would design processes change? During the course of the research described in this dissertation, a series of simulations and experiments were conducted which produced a computer-based simulated design, manufacture, and use environment wherein these questions could begin to be answered. A kit-of-parts model building system was devised which could be used to design model buildings in virtual form by downloading virtual representations of the components from the Internet and assembling them into a desired form. The virtual model building could then be used to order the manufacture of real components online, and remotely controlled robots used to assemble the actual building on the site. Through the use of special hardware manufactured into the components, real-time remote monitoring and control of the current state of the finished model building was affected during the building's lifetime. The research establishes the feasibility of an online life-cycle environment where a virtual representation of an artifact is created and used to both manufacture a real-world counterpart and also monitor and control the current state of the real-world object. The state-of-the-art of pertinent technologies were explored through literature searches and experiments. Data representation, rule-based design techniques, robotics, and digital control were studied, and a series of design principles established which lend themselves toward a life-cycle management paradigm. Several case studies are cited which show how the design principles and life-cycle management environment can be applied to real buildings and other artifacts such as vehicles and marine structures. Ideas for expanded research on the life-cycle management paradigm are cited.
series	thesis:PhD
email
more	http://wwwlib.umi.com/dissertations/fullcit/9909905
last changed	2003/11/20 19:57

_id	4da4
authors	Jordan, J. Peter
year	1988
title	ARCH 431: Computer-Aided Design
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 187-200
doi	https://doi.org/10.52842/conf.acadia.1988.187
summary	There is a significant variance in the way computer courses are taught at various institutions around the country. Generally, it is useful to think of these courses falling either into a "tool-building" or a "tool-using" category. However, within either category, there is a variety of focus on the application of the "tool". Two courses have been developed at the University of Hawaii at Manoa which deal with computer applications. The first course is more quantitatively oriented, encouraging students to explore ways of dealing with problems in a more complex and substantial manner. This paper deals with the second course whose focus has shifted toward design issues, using the computer as a tool to explore these issues. This course exposes the student, not to training on a specific computer-aided drafting system, but to issues in computer-aided design which include hardware and software systems, human-machine interface, and the nature of the design process. This course seems to be an appropriate model for introducing computer-aided design to undergraduates in a professional design program.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	67ac
authors	Koivunen, Marja-Riitta and Mantyla, Martti
year	1988
title	Hut Windows : An Improved Architecture for a User Interface Management System
source	IEEE Computer Graphics and Applications. January, 1988. vol. 8: pp. 43-52 : ill. includes bibliography
summary	The design of Hut Windows, a user interface management system intended for applications in mechanical CAD, is the subject of this article. Hut Windows features a three-layered internal architecture, where the presentation, dialogue- control, and application processing layers are clearly separated from each other. This leads to increased simplicity and flexibility in user interface design over the more traditional situation where all of these layers are closely coupled
keywords	user interface, CAD, windowing, mechanical engineering
series	CADline
last changed	2003/06/02 13:58

For more results click below: