Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 161

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2011_061
id	caadria2011_061
authors	Celani, Gabriela; José P. Duarte and Carlos V. Vaz
year	2011
title	The gardens revisited: The link between technology, meaning and logic?
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 643-652
doi	https://doi.org/10.52842/conf.caadria.2011.643
summary	The objective of this paper is to compare the computational concepts present in three books published by Mitchell between 1987 and 1990: The art of computer-graphics programming (1987), which has Robin Liggett and Thomas Kvan as co-authors, The logic of architecture (1990), probably his most influential work, and The poetics of gardens (1988), which has Charles Moore and William Turnbull as coauthors. By looking at the concepts that are presented in the three books and establishing a comparison between them, we expect to show that The poetics of Gardens should not be seen as a detour from Mitchell´s line of research, but rather as a key piece for understanding the relationship between technology, meaning and logic in his very coherent body of work.
keywords	Computational design concepts; technology; meaning; logic
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	a62c
authors	Flemming, Ulrich, Coyne, Robert F. and Glavin, Timothy J. (et al)
year	1988
title	A Generative Expert System for the Design of Building Layouts -- Version 2
source	Artificial Intelligence in Engineering: Design. editor. John J. Gero. Elsevier (Computational Mechanics Publications), 1988. PP. 445-464 : ill. includes bibliography
summary	The paper describes an attempt to increase the intelligence of a CAD system by adding capabilities (1) to systematically enumerate alternative solutions to a design problem, and (2) to take, at the same time, a broad spectrum of criteria or concerns into account. These capabilities are intended to complement the designer's abilities and performance. In connection with such attempts, fundamental problems arise when the objects to be designed have shape and are located in space. These problems are identified, and an approach to solve them is outlined. This approach is currently being tested over a range of domains all of which deal with the design of layouts of rectangles subject to constraints and criteria. The search for alternatives takes place in a state space with properties that make it possible to systematically explore and evaluate the power of various search strategies or planning paradigms. The state space is established through a domain-independent generator, while the evaluation of points in that space is carried out by a domain-dependent tester built up through a process of knowledge acquisition familiar from work with expert systems
keywords	design, expert systems, CAD, enumeration, shape grammars,architecture, intelligence, synthesis, space allocation, layout, floor plans
series	CADline
email
last changed	2003/06/02 13:58

_id	e05e
authors	Schon, Donald A. and Wigging, Glenn
year	1988
title	Kinds of Seeing and Their Functions in Designing
source	November, 1988. 31 p. : ill
summary	Architectural designing is described as a kind of experimentation that consists in reflective 'conversation' with the materials of a design situation. A designer sees, moves and sees again. Working in some visual medium -- drawing, in the article examples -- the designer sees what is 'there' in some representation of a site, draws in relation to it, and sees what has been drawn, thereby informing further designing. In all this 'seeing' the designer not only visually registers information but also constructs its meaning -- identifies patterns and gives them meaningsÔ h) 000*°° ÔŒ beyond themselves. Words like 'recognize,' 'detect,' 'discover' and 'appreciate' denote variants of seeing, as do such terms as 'seeing that,' 'seeing as' and 'seeing in.' The purpose here is to explore the kinds of seeing involved in designing and to describe their various functions. At local and global levels, and in many different ways, designing is an interaction of making and seeing, doing and discovering. On the basis of a few minuscule examples, the authors suggest some of the ways in which this sort of interaction works. Some conditions that enable it to work are described. And some of its consequences for design education and for the development of computer environments useful to designers are drawn
keywords	design methods, education, architecture, cognition, perception, design process, semantics, protocol analysis
series	CADline
last changed	2003/06/02 13:58

_id	2d0b
authors	Wagter, H.
year	1988
title	CAD-Techniques in Architecture and Building Design, a Realistic Overview
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 7-14
summary	Giving an overview on CAD-techniques in architecture and building design might seem a bit superfluous. Every mentioned subject will be worked out in this conference in much more detail than is possible in the context of this very first paper. Nevertheless it will be useful to sketch a framework. It gives an opportunity to participants to compare, and will help to judge the different influences of the conclusions in the right context. For the authors it might mean that they can fill in their own place, and that their introductions can be short so there will be more time available for in depth explanations. It must be stated that CAAD-Futures theme is at the design part of the building process as mentioned in its announcement "it takes stock of current developments in CAAD and attempts to anticipate the direction of future developments and their relevance to and impact on architectural practice and education, the building industry and the quality of the built environment".
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	caadria2006_569
id	caadria2006_569
authors	WEI-TSANG CHANG, TENG-WEN CHANG
year	2006
title	FOLDING SPACE WITH TIME-BASED OPERATIONS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 569-571
doi	https://doi.org/10.52842/conf.caadria.2006.x.j6m
summary	Folding is not only a design operation of shaping but also a philosophy theory from Deleuze (Deleuze 1988) which was adopted by architecture. Basically, folding constitutes to forming and topology, which often delivered a mathematical and philosophical expression in generating 3D architectural form. For instance, the work of Eisenman (Eisenman 2003), Libeskind and Lynn (Lynn 1998), they use folding as inspiration to explore the textural folding and bifurcation meaning in the process of form-making. While exploring the meaning of folding, their ideas are expressed by the form using computational tools. Therefore, if a suitable or inspirable tool like our Folding Space (FoS) could be available, such action –fold can be expressed further in the form exploration process.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	0697
authors	Balachandran, M.B. and Gero, John S.
year	1988
title	Development of a Knowledge-Based System for Structural Optimization
source	Dordrecht: Kluwer, 1988. pp. 17-24
summary	Optimization is a useful and challenging activity in structural design. It provides designers with tools for better designs while saving time in the design process. The features of conventional optimization tools are presented and their limitations are outlined. The impact and role of knowledge-based methodologies in structural optimization processes is discussed. Structural optimization involves a number of tasks which require human expertise, and are traditionally assisted by human designers. These include design optimization formulation, problem recognition and the selection of appropriate algorithm(s). In this representation and processing of constraints are crucial tasks. This paper presents a framework for developing a knowledge-based system to accomplish these tasks. Based on the needs and the nature of the optimization process, a conceptual architecture of an integrated knowledge-based system is presented. The structure and functions of various components of the system are described
keywords	knowledge base, systems, integration, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	c9e4
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1988
title	Automated knowledge Acquisition for a Computer Hardware Synthesis System
source	19 p. : ill. Engineering Design Research Center, CMU, June, 1988. EDRC 18-06-88. includes bibliography
summary	The MICON Synthesizer Version 1 (M1) is a rule-based system which produces a complete small computer design from a set of abstract specifications. The ability of M1 to produce designs depends on the encoding of large amounts of domain knowledge. An automated knowledge acquisition tool, CGEN, works symbiotically with M1 by gathering the knowledge required by M1. CGEN acquires knowledge about how to build and when to use various computer structures. This paper overviews the operation of CGEN by providing an example of the types of knowledge acquired and the mechanisms employed. A novel knowledge-intensive generalization scheme is presented. Generalization is a pragmatic necessity for knowledge acquisition in this domain. A series of experiments to test CGEN's capabilities are explained. A description of the architecture and knowledge-base of M1 is also provided
keywords	electrical engineering, automation, knowledge acquisition, knowledge base, systems
series	CADline
last changed	2003/06/02 13:58

_id	8ac0
authors	Birmingham, William P., Gupta, Anurag P. and Siewiorek, Daniel P.
year	1988
title	The MICON System for Computer Design
source	11 p. : ill. Pittsburgh, PA: Engineering Design Research Center, CMU, November, 1988. EDRC 18-10-89. includes bibliography
summary	The MICON system is an integrated collection of programs which automatically synthesizes small computer systems from high level specifications. The system address multiple levels of design, from logical through physical, providing a rapid prototyping capability. Two programs form MICON's nucleus: a knowledge-based synthesis tool called M1; and, an automated knowledge acquisition tool named CGEN which is used to teach M1 how to design. Other tools in the MICON system are an integrated database and associated data management tools. The system is fully functional, having been used to generate working designs. This paper describes the architecture and operation of the MICON system
keywords	integrated circuits, electrical engineering, design, systems, automation, integration
series	CADline
last changed	2003/06/02 13:58

_id	8c6d
authors	Brooks, H. Gordon
year	1988
title	A New Communication Model for Architecture Using Video and 3D Computer Animated Graphics
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 263-274
doi	https://doi.org/10.52842/conf.acadia.1988.263
summary	The University of Arkansas School of Architecture has produced a half-hour television program describing Richard Meier's Atheneum in New Harmony, Indiana. The program uses an analysis technique developed by Dr. Geoffrey Baker, RIBA. The treatment for the material is a combination of on- site video and computer generated 3D animated graphics. An instrument was developed to evaluate the video and its 3D graphics. Based on analysis of the test data several conclusions are apparent. Students believe the video to be very helpful in understanding this building. This video appears to be paced too quickly for understanding in one viewing. Repetitive viewings of the video are helpful in understanding the content. Some students are able to understand principles presented visually better than those presented verbally, but best learning happens when information is reinforced visually and verbally.
series	ACADIA
last changed	2022/06/07 07:54

_id	a19d
authors	Brown, G.Z. and Novitski, Barbara-Jo
year	1988
title	A Macintosh Design Studio
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 151-162
doi	https://doi.org/10.52842/conf.acadia.1988.151
summary	During the past year at the University of Oregon, we have conducted an experimental design studio in which each student had an Apple Macintosh SE microcomputer on his or her studio desk. Each term we experimented with a variety of software, furniture arrangements, and pedagogical approaches to integrating computers in design teaching. Like most others who have conducted such experiments, we encountered problems in trying to use hardware and software which is fundamentally inappropriate for the intuitive, graphic, and creative processes characteristic of preliminary design. However, we solved many of these problems and have produced useful techniques that may form the beginnings of a new approach to the use of computers in architecture schools. Our results fall in three major categories: 1) pedagogical discoveries about learning to design with a computer, which is greater than the sum of learning to design and learning about computers; 2) design exercises based on the Macintosh environment, exploiting the unique graphic qualities of the machine while simultaneously developing the ideas and drawing skills needed in the preliminary stages of design; 3) descriptions of the studio environment, including hardware, software, workstation layouts, security solutions, and other practical information that might be useful to others who are contemplating a similar project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ef5c
authors	Danahy, J. W. and Wright, R.
year	1988
title	Exploring Design through 3-Dimensional Simulations
source	Landscape Architecture 78(5), pp. 64-71
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	sigradi2018_1762
id	sigradi2018_1762
authors	de Albuquerque Montezi, Rafael; Tanoue Vizioli, Simone Helena
year	2018
title	Digital morphogenesis and tectonics: an analysis of Peter Eisenman’s Aronoff Center
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 359-366
summary	The concept of architectural tectonics relates simultaneously to pragmatic and poetic aspects of the materiality, aiming the expression of these concerns in the result of the Form. Far from only a theoretical concerning, these design decisions affect how our society employs its natural and human resources. This work takes the Aronoff Center for Design and Arts (1988-1996), by Peter Eisenman, as a case study for a graphical analysis, dealing with the consequences of a free-form morphogenesis to its construction and investigating the tectonics of the contemporary architecture.
keywords	Contemporary Architecture; Digital Project; Tectonics
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	4743
authors	Dvorak, Robert W.
year	1988
title	Designing in the CAD Studio
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 123-134
doi	https://doi.org/10.52842/conf.acadia.1988.123
summary	The "CAD Studio" is one of many design options that fourth year students may select in the College of Architecture. In this electronic environment, the students analyze and present their designs totally on the computer. The vehicle used is a fifteen week architectural problem called the "Calor Redesign Project". The "Calor" problem requires the move of a famous residence to a hot arid climate. The residence must then be redesigned in the original architect's style so the building becomes as energy efficient as possible in its new arid environment. The students are required to use as design criteria a new building program, the design philosophy of the original architect, and appropriate passive energy techniques that will reduce the thermal stress on the building. The building's energy response is measured by using an envelope energy analysis program called "Calor". Much of the learning comes from imposing a new set of restraints on a famous piece of architecture and asking the student to redesign it. The students not only need to learn and use a different design philosophy, but also develop new skills to communicate their ideas on the computer. Both Macintosh and IBM computers are used with software ranging from Microsoft Works, Superpaint, AutoCAD, MegaCAD, Dr Halo, to Calor.
series	ACADIA
last changed	2022/06/07 07:55

_id	819d
authors	Eiteljorg, H.
year	1988
title	Computing Assisted Drafting and Design: new technologies for old problems
source	Center for the study of architecture, Bryn Mawr, Pennsylvania
summary	In past issues of the Newsletter, George Tressel and I have written about virtual reality and renderings. We have each discussed particular problems with the technology, and both of us mentioned how compelling computer visualizations can be. In my article ("Virtual Reality and Rendering," February, 1995, Vol. 7, no. 4), I indicated my concerns about the quality of the scholarship and the level of detail used in making renderings or virtual worlds. Mr. Tressel (in "Visualizing the Ancient World," November, 1996, Vol. IX, no. 3) wrote about the need to distinguish between real and hypothetical parts of a visualization, the need to differentiate materials, and the difficulties involved in creating the visualizations (some of which were included in the Newsletter in black-and-white and on the Web in color). I am returning to this topic now, in part because the quality of the images available to us is improving so fast and in part because it seems now that neither Mr. Tressel nor I treated all the issues raised by the use of high-quality visualizations. The quality may be illustrated by new images of the older propylon that were created by Mr. Tressel (Figs. 1 - 3); these images are significantly more realistic than the earlier ones, but they do not represent the ultimate in quality, since they were created on a personal computer.
series	other
last changed	2003/04/23 15:50

_id	2bff
authors	Ervin, Stephen M., Gross, Mark D. and Fleisher, Aaron
year	1988
title	CM2 : A Constraint Based Design Environment
source	25 p. : ill. 1988. includes bibliography
summary	This report describes CM2, a program on the Macintosh computer for constraint-based design exploration and development. The architecture of the kernel for object- oriented constraint management is described, followed by three illustrated examples of applications built around the kernel. A concluding section lists a number of questions raised to date by the development of CM2 and its applications. Appendix 1 provides a `pseudo-code' listing of the major modules of the constraint manager
keywords	architecture, constraints, design, systems
series	CADline
email
last changed	2002/09/05 15:01

_id	2613
authors	Frew, Robert S.
year	1990
title	The Organization of CAD Teaching in Design Schools
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 387-392
summary	This paper is the result of a survey of European CAD teaching that was conducted in 1987 and 1988. It makes comparisons with teaching at the Yale School of Architecture, and goes on to analyze the issues that should be addressed in a CAD program in a school of architecture.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4cbb
authors	Gero, John S. (editor)
year	1988
title	Artificial Intelligence in Engineering : Design
source	465 p. Amsterdam: Elsevier/CMP, 1988. CADLINE has abstract only
summary	This volume contains the papers in the design area from the Third International Conference on Artificial Intelligence in Engineering. Design is that most fundamental but least understood of engineering activities. Most current computer- aided design systems are primarily concerned with graphical representations of objects as they are being designed. The introduction of artificial intelligence into engineering has fostered the burgeoning interest in formal methods of engineering design. These methods treat design as being modelable using reasoning processes. The papers related to design can be grouped into two categories: those primarily concerned with design knowledge in its various forms and those primarily concerned with applications in specific domains. The papers in this volume are presented under the following headings: Design Knowledge and Representation; Integrated Circuit Design; Mechanical Engineering Design; Structural Engineering Design; Simultaneous Engineering Design; Architectural Design
keywords	AI, design, engineering, knowledge, applications, architecture, CAD, CAE, integrated circuits, representation, structures, civil engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	88cb
authors	Gero, John S. and Oksala, Tarkko (editors)
year	1988
title	Knowledge-Based Systems in Architecture
source	TIPS'88 - Knowledge Based Design in Architecture, Acta Polytechnica Scandinavica (1988 : Helsinki, Finland). 143 p. 1989
summary	The technology of knowledge-based systems can be found in texts on artificial intelligence. There is very little published so far on knowledge-based systems in architecture. To this end an international conference -- TIPS' 88: Knowledge-Based Design in Architecture -- was organized for August 1988 in Finland. Thirteen papers from that conference have been selected and edited for this monograph. They are grouped under five parts: Introduction; Schemas and Models; Processes and Knowledge; Modeling Buildings; and Creativity and Knowledge-Based Systems
keywords	knowledge base, architecture, representation, expert systems,building, creativity
series	CADline
email
last changed	2003/06/02 13:58

For more results click below: