Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 74

Reformat results as: short short into frame detailed detailed into frame

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	0ee6
authors	Boyle, R. and Thomas, R.
year	1988
title	Computer Vision: A First Course
source	Blackwell Scientific Publications
summary	Computer vision is a new discipline recently developed from image processing, which is able to take raw images, and, after suitable processing, derive information from them automatically. Computer vision applications are legion in the areas of automated manufacture and robotics, where it may be addressed to such problems as resolving motion in images, and 3-D analysis. This book is a much-needed introduction to the subject for senior undergraduates and graduates. It covers the necessary mathematical techniques at a level suitable for the mathematical literate who has not encountered any image processing before, and proceeds to an examination of some pure vision applications. There is a discussion of human perception and how it relates to machine perception, and there are examples throughout the text, with exercises at the end of each chapter. Table of Contents Perception A pattern recognition system Image acquisition and modelling Low level processing Segmentation A PCB example Line labelling Towards three dimensions Knowledge representation Rule based systemsl Epilogue Appendices.
series	other
last changed	2003/04/23 15:14

_id	e7a8
authors	Emde, H.
year	1988
title	Geometrical Fundamentals for Design and Visualization of Spatial Objects
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 171-178
summary	Every architectural object is a 3-dimensional entity of the human environment, haptically tangible and optically visible. During the architectural process of planning every object should be designed as a body and should be visualized in pictures. Thus the parts of construction get an order in space and the steps of construction get an order in time. The ideal planning object is a simulated anticipation of the real building object, which is to be performed later on. The possibility to relate the planning object immediately to the building object relies on the fact that they both have the same "geometry" This means: both can be described in the same geometric manner. Creating and visualizing spatial objects is based on geometrical fundamentals. Theoretical knowledge and practical control of these fundamentals is essential for the faultless construction and the realistic presentation of architectural objects. Therefore they have to be taught and learned thoroughly in the course of an architectural education. Geometrical design includes the forming of object- models (geometry of body boundaries), the structuring of object-hierarchies (geometry of body combinations) and the colouring of objects. Geometrical visualization includes controlling the processes of motion, of the bodies (when moving objects) and of the center of observation (when moving subjects) as well as the representation of 3-dimensional objects in 2- dimensional pictures and sequences of pictures. All these activities of architects are instances of geometrical information processing. They can be performed with the aid of computers. As for the computer this requires suitable hardware and software, as for the architect it requires suitable knowledge and capabilities to be able to talk about and to recall the perceivable objects and processes of the design with logic abstracts (language of geometry). In contrast to logical, numerical and textual informations the geometric informations concerning spatial objects are of much higher complexity. Usually these complexes of information are absorbed, processed and transmitted by the architect in a perceptive manner. The computer support in the field of geometry assumes that the processing of perceptions of the human consciousness can be converted by the computer as a framework of logical relations. Computer aided construction and representation require both suited devices for haptical and optical communication and suitable programs in particular.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	diss_howe
id	diss_howe
authors	Howe, Alan Scott
year	1988
title	A new paradigm for life-cycle management of kit-of-parts building systems
source	UNIVERSITY OF MICHIGAN , PhD
summary	The research described in this dissertation brings together various technologies in manufacturing and information management and suggests a new paradigm for the design, manufacture, and lifetime use of artifacts using kit-of-parts systems and rule-based assembly. The questions are asked: If architects, designers, and users were given direct online connection to real-time design information sources and fabrication processes, and have the ability to monitor and control the current state of designed objects throughout the objects' lifetime, how would the entire life-cycle of a product be affected, and how would design processes change? During the course of the research described in this dissertation, a series of simulations and experiments were conducted which produced a computer-based simulated design, manufacture, and use environment wherein these questions could begin to be answered. A kit-of-parts model building system was devised which could be used to design model buildings in virtual form by downloading virtual representations of the components from the Internet and assembling them into a desired form. The virtual model building could then be used to order the manufacture of real components online, and remotely controlled robots used to assemble the actual building on the site. Through the use of special hardware manufactured into the components, real-time remote monitoring and control of the current state of the finished model building was affected during the building's lifetime. The research establishes the feasibility of an online life-cycle environment where a virtual representation of an artifact is created and used to both manufacture a real-world counterpart and also monitor and control the current state of the real-world object. The state-of-the-art of pertinent technologies were explored through literature searches and experiments. Data representation, rule-based design techniques, robotics, and digital control were studied, and a series of design principles established which lend themselves toward a life-cycle management paradigm. Several case studies are cited which show how the design principles and life-cycle management environment can be applied to real buildings and other artifacts such as vehicles and marine structures. Ideas for expanded research on the life-cycle management paradigm are cited.
series	thesis:PhD
email
more	http://wwwlib.umi.com/dissertations/fullcit/9909905
last changed	2003/11/20 19:57

_id	0803
authors	Jabri, Marwan A. and Skellern, David J.
year	1988
title	Automatic Floorplan Design Using PIAF
source	August, 1988. 36 p. : ill. tables
summary	This paper presents PIAF (a Package for Intelligent and Algorithmic Floorplanning), developed at Sydney University Electrical Engineering (SUEE) for use in custom integrated circuit design. Floorplanning plays a crucial role in the design of custom integrated circuits. When design is approached in a top-down fashion, the function to be implemented on silicon is first decomposed in a conceptual phase into a Functional Block Diagram (FBD). This FBD has a 'blocks and buses' structure where blocks represent sub- functions and buses represent the interconnections that carry data and other information between blocks. The decomposition of the function into sub-functions is hierarchical and aims at reducing the complexity of the design problem. When the FBD is known, the floorplanning process may be performed. When this task is performed manually, the designer searches for a relative placement of the blocks and for an area and shape for each block to minimize the overall chip layout area while at the same time meeting design constraints such as design tool limitations, interconnection characteristics and technological design rules. PIAF is a knowledge-based system (KBS) that has been developed at SUEE during the last four years. It relies on a strategy that partitions the floorplanning task in a way that allows efficient use of heuristics and specialized design knowledge in the generation and pruning of the solution space. This paper presents the operation of PIAF and discusses several implementation issues including; KBS structure, knowledge representation, knowledge acquisition, current context memory design, design quality factors and explanation facility. This paper uses a running example to present the operation of each PIAF's KBS-based solving phases
keywords	knowledge, representation, knowledge acquisition, electrical engineering, design, integrated circuits, knowledge base, systems, layout, synthesis
series	CADline
last changed	2003/06/02 10:24

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	8fb2
id	8fb2
authors	McCall, Raymond, Bennett, Patrick and Johnson, Erik
year	1994
title	An Overview of the PHIDIAS II HyperCAD System
doi	https://doi.org/10.52842/conf.acadia.1994.063
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 63-74
summary	The PHIDIAS II HyperCAD system combines the functionality of CAD graphics, hypermedia, database management and knowledge-based computation in a single, highly integrated design environment. The CAD functionality includes both 3-D and 2-D vector graphics. The hypermedia includes support for text, raster images, video and sound. The database management enables persistent storage and interlinking of large collections of text, images, video, sound and vector graphics, i.e., thousands of vector graphic objects and drawings in a single database. Retrieval is provided both through use of "associative indexing" based on hyperlinks and through use of an advanced query language. The knowledge- based computation includes both inference and knowledgebased critiquing. A highly unusual feature of PHIDIAS II is that it implements all of its functions using only hypermedia mechanisms. Complex vector graphic drawings and objects are represented as composite hypermedia nodes. Inference and critiquing are implemented through use of what are known as virtual structures [Halasz 1988], including virtual links and virtual nodes. These nodes and links are dynamic (computed) rather than static (constant). They are defined as expressions in the same language used for queries and are computed at display time. The implementation of different kinds of functions using a common set of mechanisms makes it easy to use them in combination, thus further augmenting the system's functionality. PHIDIAS supports design by informing architects as they develop a solution's form. The idea is thus not to make the design process faster or cheaper but rather to improve the quality of the things designed. We believe that architects can create better buildings for their users if they have better information. This includes information about buildings of given types, user populations, historical and modern precedents, local site and climate conditions, the urban and natural context and its historical development, as well as local, state and federal regulations.
series	ACADIA
last changed	2022/06/07 07:59

_id	ed0f
authors	Moshe, R. and Shaviv, E.
year	1988
title	Natural Language Interface for CAAD System
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 137-148
summary	This work explores issues involved in the development of a natural interface for man-machine dialogue in architectural design processes. A hand-touch on an interactive surface is suggested as the best natural-language interface for architectural CAD systems. To allow the development of a rich range of hand-touch natural-language for communicating information and commands to the computer, it is proposed to develop a new type of a touch-panel, for which a set of specifications is presented. A conceptual design of an architectural workstation, having the described touch-panel, is presented. This workstation is characterized by the integration of the entire range of control and communication facilities required for any architectural task into a single interactive unit. The conceptual model for this workstation is the standard size drawing board, on which the architect is accustomed to spread documents, drawings, books and tools, shuffle them around and interchange them freely by using the natural-language interface developed in this work. The potential of the suggested hand-touch natural-language and the proposed workstation are demonstrated by a case-study.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ca71
authors	Noble, Douglas and Rittel, Horst W.J.
year	1988
title	Issue-Based Information Systems for Design
doi	https://doi.org/10.52842/conf.acadia.1988.275
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 275-286
summary	The understanding of planning and design as a process of argumentation (of the designer with himself or with others) has led to the concept of IBIS (Issue-Based Information Systems). The elements of IBIS are Issues, each of which are associated with alternative positions. These in turn are associated with arguments which support or object to a given position (or another argument). In the course of the treatment of issues, new issues come up which are treated likewise. Issue-Based Information Systems are used as a means of widening the coverage of a problem. By encouraging a greater degree of participation, particularly in the earlier phases of the process, the designer is increasing the opportunity that difficulties of his proposed solution, unseen by him, will be discovered by others. Since the problem observed by a designer can always be treated as merely a symptom of another higher-level problem, the argumentative approach also increases the likelyhood that someone will attempt to attack the problem from this point of view. Another desirable characteristic of the Issue-Based Information System is that it helps to make the design process 'transparent'. Transparency here refers tO the ability of observers as well as participants to trace back the process of decision-making. This paper offers a description of a computer-supported IBIS (written in 'C' using the 'XWindows' user interface), including a discussion of the usefulness of IBIS in design, as well as comments on the role of the computer in IBIS implementation, and related developments in computing.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	98bd
authors	Pea, R.
year	1993
title	Practices of Distributed Intelligence and Designs for Education
source	Distributed Cognitions, edited by G. Salomon. New York, NY: CambridgeUniversity Press
summary	v Knowledge is commonly socially constructed, through collaborative efforts... v Intelligence may also be distributed for use in designed artifacts as diverse as physical tools, representations such as diagrams, and computer-user interfaces to complex tasks. v Leont'ev 1978 for activity theory that argues forcibly for the centrality of people-in-action, activity systems, as units of analysis for deepening our understanding of thinking. v Intelligence is distributed: the resources that shape and enable activity are distributed across people, environments, and situations. v Intelligence is accomplished rather than possessed. v Affordance refers to the perceived and actual properties of a thing, primarily those functional properties that determine how the thing could possibly be used. v Norman 1988 on design and psychology - the psychology of everyday things" v We deploy effort-saving strategies in recognition of their cognitive economy and diminished opportunity for error. v The affordances of artifacts may be more or less difficult to convey to novice users of these artifacts in the activities to which they contribute distributed intelligence. v Starts with Norman's seven stages of action Ø Forming a goal; an intention § Task desire - clear goal and intention - an action and a means § Mapping desire - unable to map goal back to action § Circumstantial desire - no specific goal or intention - opportunistic approach to potential new goal § Habitual desire - familiar course of action - rapidly cycle all seven stages of action v Differentiates inscriptional systems from representational or symbol systems because inscriptional systems are completely external, while representational or symbol systems have been used in cognitive science as mental constructs. v The situated properties of everyday cognition are highly inventive in exploiting features of the physical and social situation as resources for performing a task, thereby avoiding the need for mental symbol manipulations unless they are required by that task. v Explicit recognition of the intelligence represented and representable in design, specifically in designed artifacts that play important roles in human activities. v Once intelligence is designed into the affordances properties of artifacts, it both guides and constrains the likely contributions of that artifact to distributed intelligence in activity. v Culturally valued designs for distributed intelligence will change over time, especially as new technology becomes associated with a task domain. v If we treat distributed intelligence in action as the scientific unit of analysis for research and theory on learning and reasoning... Ø What is distributed? Ø What constraints govern the dynamics of such distributions in different time scales? Ø Through what reconfigurations of distributed intelligence might the performance of an activity system improve over time? v Intelligence is manifest in activity and distributed in nature. v Intelligent activities ...in the real world... are often collaborative, depend on resources beyond an individual's long-term memory, and require the use of information-handling tools... v Wartofsky 1979 - the artifact is to cultural evolution what the gene is to biological evolution - the vehicle of information across generations. v Systems of activity - involving persons, environment, tools - become the locus of developmental investigation. v Disagrees with Salomon et al.'s entity-oriented approach - a language of containers holding things. v Human cognition aspires to efficiency in distributing intelligence - across individuals, environment, external symbolic representations, tools, and artifacts - as a means of coping with the complexity of activities we often cal "mental." "
series	other
last changed	2003/04/23 15:14

_id	ea5c
authors	Purcell, P.
year	1988
title	The Role of Media Technology in the Design Studio
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 179-187
summary	This paper refers to a program of work, which aims to integrate a range of computer-based multi-media technologies which has the overall goal of enhancing the processes of education in the design studio. The individual projects describe the development of visual information systems and intelligent design systems. The framework of support for much of the work is Project Athena, a campus wide initiative to apply new technology towards enhancing the educational process project.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	aef1
authors	Rosenman, M.A., Gero, J.S. and Coyne, R.D. (et al)
year	1987
title	SOLAREXPERT : A Prototype Expert System for Passive Solar Energy Design in Housing
source	Canberra: Aust NZ Solar Energy Society, 1987. vol.II: pp. 361-370. Also published in People and Technology - Sun, Climate and Building, edited by V. Szokolay, Univ. of Queensland, Brisbane, 1988
summary	Passive solar energy design is not an exact science in which a set of analytical procedures can be followed to produce results. Rather it depends heavily on subjective parameters and experience collected over time which is heuristic by nature. At present this knowledge is available in books but while this knowledge is comprehensive, it is unstructured and not always easy to make use of. A computer-based system allows for flexible interactive dialogue and for the incorporation of analytical procedures which may be required. This paper describes work on SOLAREXPERT, a prototype expert system to aid designers in passive solar energy design for single dwellings. The system operates at a strategic level to provide basic advice on the form of construction and types of passive solar systems and at a spatial zone level to provide more detailed advice on sizes and materials. It allows for modification of the information entered so that users may explore several possibilities
keywords	applications, experience, housing, expert systems, energy, design, architecture
series	CADline
email
last changed	2003/05/17 10:17

_id	0e42
authors	Rouse, W., Geddes, N. and Curry, R.
year	1998
title	An Architecture for Intelligent Interfaces: Outline of an Approach to Supporting Operators of Complex Systems Articles
source	Human-Computer Interaction 1987-1988 v.3 n.2 pp. 87-122
summary	The conceptual design of a comprehensive support system for operators of complex systems is presented. Key functions within the support system architecture include information management, error monitoring, and adaptive aiding. One of the central knowledge sources underlying this functionality is an operator model that involves a combination of algorithmic and symbolic models for assessing and predicting an operator's activities, awareness, intentions, resources, and performance. Functional block diagrams are presented for the overall architecture as well as the key elements within this architecture. A variety of difficult design issues are discussed, and ongoing efforts aimed at resolving these issues are noted.
series	other
last changed	2002/07/07 16:01

_id	fbe9
authors	Sharit, Joseph and Cuomo, Donna L.
year	1988
title	A Cognitively Based Methodology for Evaluating Human Performance in the Computer-Aided Design Task Domain
source	Behaviour and Information Technology 1988 v.7 n.4 p.373-397
summary	This article describes a methodology for evaluating human performance in the computer aided design (CAD) task environment. The methodology is based primarily on cognitive theoretic frameworks that are consistent with processes presumed to underlie human design activities. The motivation for its development stems from rapid software and hardware advances in CAD systems and our relative lack of understanding of how these enhancements affect human design performance for (1) fundamentally different types of tasks and (2) different levels of complexity for a particular task. This methodology is currently being applied to computer aided architectural design, an area where artificial intelligence (AI), enhanced geometric modelling and other system features are being debated in terms of their usefulness in aiding the human's design activities.
series	other
last changed	2002/07/07 16:01

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	a81e
authors	Van Andel, Joost
year	1988
title	Expert Systems in Environmental Psychology
source	JAPS10 conference. 1988. includes bibliography
summary	The knowledge gathered through research in environmental psychology is not optimally used by designers and other people working in applied settings such as politicians and civil servants. In this paper a number of causes and possible improvements of this situation are discussed. Two aspects are highlighted in particular: the structure and the presentation of information. A recent development to present knowledge from environmental psychology is the use of computerized information systems or expert systems. Limitations and possibilities of expert systems in general and for environmental psychology in particular are discussed. The issue is illustrated with parts of an expert system on the design of children's play environments using the pattern language as a structure to present information efficiently and attractively to designers
keywords	expert systems, design process, psychology, patterns, languages
series	CADline
last changed	1999/02/12 15:09

_id	0697
authors	Balachandran, M.B. and Gero, John S.
year	1988
title	Development of a Knowledge-Based System for Structural Optimization
source	Dordrecht: Kluwer, 1988. pp. 17-24
summary	Optimization is a useful and challenging activity in structural design. It provides designers with tools for better designs while saving time in the design process. The features of conventional optimization tools are presented and their limitations are outlined. The impact and role of knowledge-based methodologies in structural optimization processes is discussed. Structural optimization involves a number of tasks which require human expertise, and are traditionally assisted by human designers. These include design optimization formulation, problem recognition and the selection of appropriate algorithm(s). In this representation and processing of constraints are crucial tasks. This paper presents a framework for developing a knowledge-based system to accomplish these tasks. Based on the needs and the nature of the optimization process, a conceptual architecture of an integrated knowledge-based system is presented. The structure and functions of various components of the system are described
keywords	knowledge base, systems, integration, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	404e
authors	Oksala , T.
year	1988
title	Logical Models for Rule-based CAAD
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 107-116
summary	The aim of this paper is to present the basic results of a theoretic approach to represent architectural individual forms in CAD systems. From the point of view of design methodology and problem solving these descriptions might be conceived' as parts of possible environments satisfying the laws of some design theory in logical sense. This paper describes results in a series of logical studies towards rule and knowledge based systems for design automation. The effective use of programming languages and computers as design aids in architecture presupposes certain capabilities to articulate built environment logically. The use of graphic languages in the description of environmental items e.g. buildings might be theoretically mastered by formal production systems including linguistic, geometric, and spatio-material generation. The combination of the power of formal mechanisms and logical individual calculus offers suitable framework to generate arbitrary e.g. free spatial compositions as types or unique solutions. In this frame it is natural to represent in a coherent way very complex hierarchical parsing of buildings in explicit form as needed in computer implementations. In order to simulate real design work the individual configurations of possible built forms should be designed to satisfy known rules. In the preliminary stage partial solutions to design problems may be discussed in mathematical terms using frameworks like lattices, graphs, or group theoretical considerations of structural, functional, and visual organization of buildings. The capability to produce mathematically sophisticated geometric structures allows us to generalize the approach further. The theoretical design knowhow in architecture can be partly translated in to some logic and represented in a knowledge base. These rules are used as selection criteria for geometric design candidates in the sense of logical model theory and mathematical optimization. The economy of the system can be developed by using suitable conduct mechanisms familiar e.g. from logic programming. The semantics of logic offers a frame to consider computer assisted and formal generation in design. A number of semantic and pragmatic problems, however, remain to be solved. In any case conceptual analyses based on logic are applicable in order to rationally reconstruct architectural goals contributing to the quality of environmental design, which should be the main goal in the development of design systems in near future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	45b7
authors	Oxman, R.E.
year	1988
title	Expert System for Generation and Evaluation in Architectural Design
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	The research field, focuses on a new research area of Knowledge Based Systems for Architectural Design. The research deals with concepts and tools emerging from Artificial Intelligence, Knowledge Based Systems and Expert Systems. The research is involved with the construction of a theoretical basis for the development of approaches and methods for the representation and control of design knowledge as a reasoning process. Key questions which attempt to reconsider representation and control in design are formulated. The following questions serve as a research framework out of which new approaches, methods and tools were developed. (1.)What are the existing ideas, methods and tools in Expert Systems? (2.) What are the performance characteristics of Expert Systems in Architectural Design ? (3.) What are the desired operative characteristics and interactions for Expert Systems in design ? (4.) How is it possible to formulate and apply the diverse forms of Architectural Knowledge in Expert Systems for design? (5.) What are the problems of implementation in the development of Expert Systems for design ? The state of the art in knowledge based systems is surveyed, while emphasizing the differences between conventional systems and knowledge based systems. Representation and control methods and the components of expert systems are reviewed. Expert systems for diagnosis, interpretation, planning and design are analysed with respect to their performance characteristics. Techniques and technologies of existing tools are defined. An expert system for the generation and evaluation of ill defined architectural design problems is develped. A formalization of the concept of 'design interpretation' is proposed and developed. It is applied in the process of defining and classifying the performance characteristics of expert systems for design. This concept is based upon two sets of reasoning processes: those which enable a mapping between design requirements and solution descriptions in the generation stage of design and those between solution descriptions and performance evaluation in the evaluation stage of design. On the basis of the formalization of this concept, an expert system capable of integrating various modes of performance is proposed and developed. The system functions as a 'design generator', a 'design critic', or a' design critic-generator'. These modes, which integrate generation and evaluation in the same system, operate by employing both forward chaining and backward chaining inference mechanisms. As a result of the examination of desired forms of interactions, a new approach for dual direction interpretation between graphic and verbal modes is developed. This approach reflects the importance of both graphical and verbal expression in design. The approach is based upon a simultaneous mapping between symbolic-verbal interpretation and graphic interpretation. The work presents the mapping process through the concept of design interpretation, employing geometrical knowledge, typological knowledge and evaluation knowledge. A tool which provides communication between an expert system and a graphic system was developed and is presented. The importance of such a tool in expert systems for design resides in the provision of free choice to the user for interacting with the system either graphically or verbally during the design process. An additional component in the development of knowledge-based systems for design is related to the important question of knowledge definition and the representational schemata of design knowledge. A new representational scheme for complex architectural knowledge, termed 'The generation and refinement scheme of a design prototype' is proposed and developed. Its operation as part of a total integrated design system is demonstrated. The scheme is based upon the structures of knowledge of design precedents which constitute typical situations and solutions in architectural design. This scheme provides an appropriate representation for the two types of knowledge which operate in a refinement process of a design prototype. Generative knowledge describes the solution space by predefined refinement stages; interpretive knowledge enables their selection. The examination of representational methods for the proposed scheme indicated that employing a single representational method lacked enough generalization and expressive power for the needs of the design knowledge structures. It was found that a way to represent complex structures is through the integration of multiple methods of representation, each one according to the knowledge characteristics. In order to represent the proposed scheme of design knowledge, a unique method was developed which integrates both rules and frames. The method consists of a rules-frames-rules structure for the representation of a design prototype. An approach is developed for the implementation of these concepts in an expert system for design. PRODS: A prototype based expert system shell for design is developed and demonstrated. The system consists of three basic components: a rule-based expert system shell, a frame system, and a knowledge base interface. All system interactions are controlled by the inference engine. It passes control between the rule-base and the frame-base inference engines, and provides communications between the rule-based and frame-based representations. It is suggested that expert system can interface with external CAD systems including graphics, communicating through a central representation. These concepts and developments are demonstrated in two implementations. The PREDIKT system for the preliminary design of the residential kitchen; the PROUST system for the selection and refinement of dwelling types. PREDIKT demonstrates the integration of rules and a graphical-verbal interpreter; in addition, PROUST demonstrates the significance of hybrid representation in the generation and refinement processes. The results and conlusions are summarized. Future research agenda within the field of knowledge-based systems for design is discussed, and potential research areas are defined.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	6c93
authors	Rehg, J., Elfes, A. and Talukdar, S.N. (et al)
year	1988
title	CASE : Computer-Aided Simultaneous Engineering
source	13 p. : ill
summary	Pittsburgh, PA: Engineering Design Research Center, CMU, 1988. EDRC 05-22-88. This paper presents a new system for computer-aided mechanical design known as CASE, which stands for Computer- Aided Simultaneous Engineering. CASE was developed to support mechanical design at the project level, and serve as a means of integrating into the design process concerns from other parts of the lifecycle of a product. CASE is composed of an integrated framework of synthesis, analysis, and translation programs, and is designed to serve as a testbed for research in representation, problem-solving, and systems integration for computer-aided mechanical design. A prototype version of CASE has been applied to the domain of window regulator design, and is capable of automatically synthesizing regulators to meet a set of specifications and performing tolerance and stress analysis on developing designs
keywords	representation, problem solving, constraints, reasoning, mechanical engineering
series	CADline
last changed	2003/06/02 14:42

For more results click below: