Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 152

Reformat results as: short short into frame detailed detailed into frame

_id	88cb
authors	Gero, John S. and Oksala, Tarkko (editors)
year	1988
title	Knowledge-Based Systems in Architecture
source	TIPS'88 - Knowledge Based Design in Architecture, Acta Polytechnica Scandinavica (1988 : Helsinki, Finland). 143 p. 1989
summary	The technology of knowledge-based systems can be found in texts on artificial intelligence. There is very little published so far on knowledge-based systems in architecture. To this end an international conference -- TIPS' 88: Knowledge-Based Design in Architecture -- was organized for August 1988 in Finland. Thirteen papers from that conference have been selected and edited for this monograph. They are grouped under five parts: Introduction; Schemas and Models; Processes and Knowledge; Modeling Buildings; and Creativity and Knowledge-Based Systems
keywords	knowledge base, architecture, representation, expert systems,building, creativity
series	CADline
email
last changed	2003/06/02 13:58

_id	cc50
authors	Gossard, D.C., Zuffante, R.P. and Sakurai, H.
year	1988
title	Representing Dimensions, Tolerances, and Features in MCAE Systems
source	IEEE Computer Graphics and Applications. March, 1988. vol. 8: pp. 51-59 : ill. includes bibliography
summary	Presented is a method for explicitly representing dimensions, tolerances, and geometric features in solid models. The method combines CSG and boundary representations in a graph structure called an object graph. Dimensions are represented by a relative position operator. The method can automatically translate changes in dimensional values into corresponding changes in geometry and topology. The representation provides an important foundation for higher level application programs to automate the redesign of assemblies and to automate tolerance analysis and synthesis. A prototype interactive polyhedral modeler based on this representation was implemented
keywords	CAE, B-rep, representation, CAD, CAM, features, dimensioning, tolerances, graphs, topology, geometric modeling, assemblies
series	CADline
last changed	2003/06/02 14:42

_id	0b4a
authors	Halbert, A.R., Todd, A.J.P. and Woodwark, J.R.
year	1988
title	Generalizing Active Zones for Set-Theoretic Solid Models
source	8 p. : ill Winchester, UK: IBM UK Scientific Centre, January, 1988. IBM UKSC Report 182. includes bibliography.
summary	A major drawback of the set-theoretic solid model is the global and non-unique way in which it is defined. In a recent paper, Rossignac and Voelcker introduced the concept of the active zone of a primitive or sub-model, which provides a localization of a set-theoretic model which is useful for a number of purposes. A more general, but simplified, definition of the active zone is presented which exploits the properties of the symmetric difference operator. A novel application of the active zone to the interactive graphical editing of set- theoretic solid models is also outlined
keywords	solid modeling, boolean operations, CSG
series	CADline
last changed	2003/06/02 13:58

_id	252a
authors	Reich, Yoram
year	1988
title	Machine Learning for Expert Systems : Motivation and Techniques
source	i-iii, 51 p. : some ill Pittsburgh, PA: Engineering Design Research Center, CMU, June, 1988. EDRC 12-27-88. includes bibliography. First generation expert systems suffer from two major problems: they are brittle and their development is a long, effortful process. Few successful expert systems for real world problems have been demonstrated. In this paper, learning, the key to intelligent behavior and expertise, is described as the answer to both expert systems deficiencies. Machine learning techniques are described, with their applicability to expert systems. A framework to organize machine learning techniques is provided. The description is followed by examples taken from the structural design domain. AI / learning / expert systems / structures / techniques. 37. Requicha, Aristides A. G. 'Mathematical Models of Rigid Solid Objects -- Production Automation Project.' Rochester, NY: College of Engineering & Applied Science, University of Rochester, November, 1977. [3], 37 p. : ill.
summary	Computational models of solid objects are potentially useful in a variety of scientific and engineering fields, and in particular in the field of design and manufacturing automation for the mechanical industries. In recent years a multitude of modelling systems have been implemented both by research laboratories and commercial vendors, but little attention has been paid to the fundamental theoretical issues in geometric modelling. This has led to severe difficulties in assessing current and proposed systems, and in distinguishing essential capabilities and limitations from user conveniences and efficiency considerations. This paper seeks a sharp mathematical characterization of 'rigid solids' in a manner that is suitable for studies in design and production automation. It draws heavily on established results in modern geometry and topology. Relevant results scattered throughout the mathematical literature are placed in a coherent framework and presented in a form accessible to engineers and computer scientists. A companion paper is devoted to a discussion of representational issues in the context set forth by this paper
keywords	solid modeling, geometric modeling
series	CADline
last changed	1999/02/12 15:09

_id	08c3
authors	Steinfeld, Edward
year	1988
title	Using CAD to Teach Architectural Design
doi	https://doi.org/10.52842/conf.acadia.1988.075
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 75-86
summary	A CAD program with solid modeling capabilities was used as the primary instructional media for a graduate level architectural design studio. The objective of the studio was to enhance design education by use of the CAD tool. A series of projects were designed to utilize CAD most effectively without sacrificing complexity and depth of educational content. The experiment identified several pedagogical advantages of CAD for design education and also some problems that have to be resolved to take maximum advantage of these tools.
series	ACADIA
last changed	2022/06/07 07:56

_id	7812
authors	Straber, W. and Seidel, H.-P. (eds.)
year	1989
title	Theory and Practice of Geometric Modeling
source	Springer-Verlag
summary	This book originates from the lectures given at the international conference "Theory and Practice of Geometric Modeling", Blaubeuren, FRG, October 3-7, 1988, that brought together leading experts from universities, system developers, and system users, to discuss new concepts and future trends in geometric modeling. The book covers a variety of topics on an advanced level and is organized as follows. Part A contains new algorithms and techniques for modeling objects that are bounded by free form surfaces. Part B focuses on surface/surface intersections, new types of blending surfaces and speed ups for ray tracing. Part C contains some new geometric tools. Part D discusses different representation schemes in solid modeling, conversions between these different schemes, and some applications. Part E covers some issues of product modeling, automatic tolerancing, high level specification of solid models (constraints, features) and the need for better user interfaces.
series	other
last changed	2003/04/23 15:14

_id	abaf
authors	Veenstra, Jack and Ahuja, Narendra
year	1988
title	Line Drawings of Octree- Represented Objects
source	ACM Transactions on Graphicsò January, 1988. vol. 7: pp. 61-75 : ill. includes bibliography.
summary	The octree structure represents the space occupied by an object as a juxtaposition of cubes. The octree structure is highly sensitive to object location and orientation, and the three-dimensional shape of the represented object is obscured. It is helpful to be able to see the actual object represented by an octree, especially for visual performance evaluation of octree algorithms. This paper presents a display algorithm that helps visualize the three-dimensional space represented by the octree. Given an octree, the algorithm produces a line drawing of the object represented by the octree, using parallel projection, from any specified viewpoint with hidden lines removed. Example of some line drawing produced by the algorithm are given. The complexity of the algorithm is also discussed
keywords	hidden lines, drawings, solid modeling, representation, octree, display, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	6ca4
authors	Woodbury, Robert F. and Oppenheim, Irving R.
year	1988
title	An Approach to Geometric Reasoning
source	20 p. : ill. Pittsburgh, PA: Engineering Design Research Center, CMU, June, 1988. EDRC-48-06-88. includes bibliography
summary	An approach to the integration of geometric information in knowledge based CAD systems is described as an architecture for geometric reasoning. The general requirements for this integration arise from the need for rich geometry representations in engineering domains and the conflicting demands of current geometric modelling and knowledge based systems. Four concepts are used as a basis: (1) Classes of spatial sets, which act by inheritance as a means for incremental definition by specialization; (2) features, which denote evaluated portions of a geometric model; (3) abstractions, which provide partial representations of geometric objects; and (4) constraints through which spatial relationships are expressed. These four concepts combine in a synergistic manner to define the complete architecture. A prototype implementation of the architecture, built using object oriented programming techniques and a boundary based solid modeler, has been achieved and demonstrated. In this paper each of the concepts and their integration into a whole are described
keywords	geometric modeling, knowledge base, systems, constraints, design, knowledge, architecture, methods, reasoning, integration
series	CADline
email
last changed	2003/06/02 10:24

_id	0220
authors	Woodwark, J.R.
year	1988
title	Eliminating Redundant Primitives from Set- Theoretic Solid Models by a Consideration of Constituents
source	16 p. : ill. Winchester: IBM UK Scientific Center, IBM United Kingdom Laboratories Limited, April, 1988. IBM UKSC Report 188. includes bibliography
summary	Set-theoretic solid models often contain redundant primitives, which slow down rendering and other processes. They are not simple to remove, especially as there can be alternative eliminations that may not be equally desirable. There has been recent progress towards solving this problem, but existing techniques for eliminating such redundant primitives do not fully consider the possibilities and rely on repeated evaluation of parts of the object's boundary, a process that is likely to be very slow. This article proposes a technique that allows alternative eliminations to be examined, and outlines a potentially efficient, but geometrically approximate, method of implementation
keywords	solid modeling, CSG, primitives, algorithms
series	CADline
last changed	2003/06/02 13:58

_id	44de
authors	Woodwark, J.R.
year	1988
title	Shape Models in Computer-Integrated Manufacture : A Review
source	18 p. Winchester: IBM UK Scientific Center, IBM United Kingdom Laboratories Limited, January, 1988. IBM UKSC Report 183. includes bibliography
summary	Existing computer-aided manufacturing systems are based on models of shape tailored to a particular process. Computer- integrated manufacture involves many different processes, and hence requires more complete models of components or assemblies. This can be provided by solid modelling techniques extended to include extra data related to manufacture such as form features and tolerances. These developments are being applied to many manufacturing processes, from casting to assembly, but profound questions remain concerning both the structure and the use of shape models in manufacture
keywords	CAM, geometric modeling, systems
series	CADline
last changed	2003/06/02 13:58

_id	0ee6
authors	Boyle, R. and Thomas, R.
year	1988
title	Computer Vision: A First Course
source	Blackwell Scientific Publications
summary	Computer vision is a new discipline recently developed from image processing, which is able to take raw images, and, after suitable processing, derive information from them automatically. Computer vision applications are legion in the areas of automated manufacture and robotics, where it may be addressed to such problems as resolving motion in images, and 3-D analysis. This book is a much-needed introduction to the subject for senior undergraduates and graduates. It covers the necessary mathematical techniques at a level suitable for the mathematical literate who has not encountered any image processing before, and proceeds to an examination of some pure vision applications. There is a discussion of human perception and how it relates to machine perception, and there are examples throughout the text, with exercises at the end of each chapter. Table of Contents Perception A pattern recognition system Image acquisition and modelling Low level processing Segmentation A PCB example Line labelling Towards three dimensions Knowledge representation Rule based systemsl Epilogue Appendices.
series	other
last changed	2003/04/23 15:14

_id	4cbb
authors	Gero, John S. (editor)
year	1988
title	Artificial Intelligence in Engineering : Design
source	465 p. Amsterdam: Elsevier/CMP, 1988. CADLINE has abstract only
summary	This volume contains the papers in the design area from the Third International Conference on Artificial Intelligence in Engineering. Design is that most fundamental but least understood of engineering activities. Most current computer- aided design systems are primarily concerned with graphical representations of objects as they are being designed. The introduction of artificial intelligence into engineering has fostered the burgeoning interest in formal methods of engineering design. These methods treat design as being modelable using reasoning processes. The papers related to design can be grouped into two categories: those primarily concerned with design knowledge in its various forms and those primarily concerned with applications in specific domains. The papers in this volume are presented under the following headings: Design Knowledge and Representation; Integrated Circuit Design; Mechanical Engineering Design; Structural Engineering Design; Simultaneous Engineering Design; Architectural Design
keywords	AI, design, engineering, knowledge, applications, architecture, CAD, CAE, integrated circuits, representation, structures, civil engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	a4ce
authors	Goldberg, D.
year	1988
title	Genetic Algorithms in Search, Optimization and Machine Learning
source	Addison-Wesley, Reading, Massachusetts
summary	David Goldberg's Genetic Algorithms in Search, Optimization and Machine Learning is by far the bestselling introduction to genetic algorithms. Goldberg is one of the preeminent researchers in the field--he has published over 100 research articles on genetic algorithms and is a student of John Holland, the father of genetic algorithms--and his deep understanding of the material shines through. The book contains a complete listing of a simple genetic algorithm in Pascal, which C programmers can easily understand. The book covers all of the important topics in the field, including crossover, mutation, classifier systems, and fitness scaling, giving a novice with a computer science background enough information to implement a genetic algorithm and describe genetic algorithms to a friend.
series	other
last changed	2003/04/23 15:14

_id	f65d
authors	Kalisperis, L.N.
year	1988
title	A Conceptual Framework for Computing in Architectural Design
source	Pennsylvania State University
summary	A brief historical overview of architectural design reveals that there has been a slow development in the conceptualization of the scope of architectural design. Advancing our understanding of the architectural design process reveals new directions for computing in architectural design. This study proposes a conceptual framework for an integrated computing environment. Design disciplines have embarked on a rigorous search for theoretical perspectives and methods that encompass a comprehensive view of architecture. Architectural design has been seen as a sequential process similar to that of industrial design. Attempts to formalize this process based on industrial design methods solved only a fraction of the overall integration problem. The resultant models are inadequate to deal with the complexity of architectural design. Emerging social problem-solving paradigms seek to construct a cognitive psychology of problem solving and have a direct relevance to architectural design. These problem-solving activities include structured, semi-structured, and ill-defined problems, which are included to varying degrees in each problem situation across a continuum of difficulty. Problem solving in architectural design involves the determination of certain objectives and also whether or not it is possible to accomplish them. Developments in computing in architecture have paralleled developments in architectural methodologies. The application of computing in architectural design has predominantly focused only on sequential process, optimum solutions, and quantifiable tasks of the design process. Qualitative, generative, tasks of architectural design were dealt with through the introduction of paradigms from linguistics and knowledge-based systems borrowed from engineering applications. Although the application of such paradigms resulted in some success, this reductionist approach to computing in architecture fragmented its integration into the design process. What is required, therefore, is a unified approach to computing in architecture based on a holistic view of the architectural design process. The model proposed in this study provides such a conceptual framework. This model shifts the focus from product to process and views the design problem as a goal-oriented problem-solving activity that allows a design team to identify strategies and methodologies in the quest for design solutions.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	21b5
authors	Müller, Volker
year	1993
title	Introducing CAD to a Big Corporation
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 497-512
summary	The report presents the ongoing activity of introducing CAD to the entire range of facilities planning and management of the Frankfurt Airport Corporation. It addresses issues of organizing the shift from conventional to computer supported planning and facilities management,- the problems of training professionals with various background in the use of new tools; aspects of data validity; regulation of data exchange; and customization of software to the needs of special tasks within the corporation. The report is based on about four years of project runtime. The preparation of the project started in fall 1988. The project proper started in June 1989. It is entering its last year. Up to now about 120 persons have been trained to use CAD.
keywords	CAD Introduction, Corporation Setting, Adult Education, Data Integrity, Data Security, Data Exchange, Linkage Between Geometric and Alphanumeric Data, Customized Systems
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	0051
authors	Wastell, D.G. and White, P.
year	1993
title	Using Process Technology to Support Cooperative work: Prospects and Design Issues
source	CSCW in Practice: An Introduction and Case Studies. pp. 105-126. Edited by Dan Diaper and Colston Sanger, London: Springer-Veriag
summary	CSCW is a diverse and eclectic field. The theme which unifies CSCW is the question of group coordination, how it is achieved as a social phenomenon and how it may be actively assisted by computer-based support. The nature of these social processes are variously discussed in many of this book's other chapters. The issue of what is "true" CSCW and what is not is a contentious academic issue. Support for non-routine "professional" work such as collaborative writing would be widely accepted as a paradigm of CSCW (see, in particular, Sharples, Chapter 4; Gilbert, chapter 5; and Diaper, Chapter 6). Electronic mail, however, does not count for some as CSCW, because it is "not really tuned (or tunable) to the needs of the work group" (Greif, 1988). Technologies which support routine work would appear to fall into a particularly controversial category. Traditional office automation systems come under this heading.
series	other
last changed	2003/04/23 15:14

_id	2a36
authors	Ben-Moshe, R. and Sorgen, A.
year	1988
title	Parametric Shape Definition by Example
source	12, [13] p., [7] p. of ill. Israel: MICROCAD, 1988(?). includes bibliography
summary	Incorporation of parametric design facilities into CAD systems presents some serious problems. The major issues are: (1) functionality - the need to cater for a great variety of designs, (2) natural user interface, with no need for the user to acquire programming skills, (3) integration and consistency with the 'host' CAD environment
keywords	parametrization, user interface, CAD, geometric modeling, mechanical engineering, CAM
series	CADline
last changed	2003/06/02 13:58

_id	c57b
authors	Bier, Eric A.
year	1988
title	Snap-Dragging. Interactive Geometric design in Two and Three Dimensions
source	University of California, Berkeley
summary	Graphic artists, mechanical designers, architects, animators, authors of technical papers and others create geometric designs (illustrations and solid models) as a major part of their daily efforts. Some part of this shape construction must be done with precision. For instance, certain line segments should be horizontal, parallel or congruent. In recent years, interactive computer programs have been used to speed up the production of precise geometric designs. These programs take advantage of high-speed graphics, equation solving, and computer input peripherals to reduce the time needed to describe point positions to the machine. Previous techniques include rounding the cursor to points on a rectangular grid, solving networks of constraints, and supporting step-by-step drafting-style constructions. Snap-dragging is a modification of the drafting approach that takes advantage of powerful workstations to reduce the time needed to make precise illustrations. Using a single gravity mapping, a cursor can be snapped to either points, lines or surface. The gravity algorithm achieves good performance by computing intersection points on the fly. To aid precise construction, a set of lines, circles, planes, and spheres, called alignment objects, are constructed by the system at a set of slopes, angles, and distances specified by the user. These alignments objects are constructed at each vertex or edge that the user has declared to be hot (of interest). Vertices and edges can also be made hot by the system through the action of an automatic hotness rule. When snap-dragging is used, shapes can often be constructed using a few more keystrokes than would be needed to sketch them freehand. Objects can be edited at arbitrary orientations and sizes. The number of primitive operations is small, making it possible to provide keyboard combinations for quickly activating most of these operations. The user interface works nearly identically in two or three dimensions. In three dimensions, snap-dragging works with a two-dimensional pointing device in a single perspective view.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	cf08
authors	Blaha, Michael R., Premerlani, William J. and Rumbaugh, James E.
year	1988
title	Relational Database Design Using An Object- Oriented Methodology
source	communications of the ACM. April, 1988. vol. 31: pp. 414-427 : ill. includes a short bibliography
summary	Object-oriented concepts provide a useful abstraction for relational database design. In this article the authors present a design technique that has been used for several projects at General Electric. The methodology is intuitive, expressive, and extensible. The new approach to relational database design is based on the work of Loomis, Sha, and Rumbaugh
keywords	relational database, design, methods, objects, modeling, representation
series	CADline
last changed	2003/06/02 13:58

_id	e8f1
authors	Frazer, J.
year	1988
title	Plastic Modelling - The Flexible Modelling of the Logic of Structure and Spaces
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 199-208
summary	Plastic Modelling is a technique which allows the computer model to be easily developed and manipulated. In particular it models not only building geometry but also logical relationships between elements, components, structure and spaces. It is the author's contention that this approach to solid modelling is particularly suitable for the interactive development of architectural design ideas.
series	CAAD Futures
email
last changed	2003/05/16 20:58

For more results click below: