Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 162

Reformat results as: short short into frame detailed detailed into frame

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	ca71
authors	Noble, Douglas and Rittel, Horst W.J.
year	1988
title	Issue-Based Information Systems for Design
doi	https://doi.org/10.52842/conf.acadia.1988.275
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 275-286
summary	The understanding of planning and design as a process of argumentation (of the designer with himself or with others) has led to the concept of IBIS (Issue-Based Information Systems). The elements of IBIS are Issues, each of which are associated with alternative positions. These in turn are associated with arguments which support or object to a given position (or another argument). In the course of the treatment of issues, new issues come up which are treated likewise. Issue-Based Information Systems are used as a means of widening the coverage of a problem. By encouraging a greater degree of participation, particularly in the earlier phases of the process, the designer is increasing the opportunity that difficulties of his proposed solution, unseen by him, will be discovered by others. Since the problem observed by a designer can always be treated as merely a symptom of another higher-level problem, the argumentative approach also increases the likelyhood that someone will attempt to attack the problem from this point of view. Another desirable characteristic of the Issue-Based Information System is that it helps to make the design process 'transparent'. Transparency here refers tO the ability of observers as well as participants to trace back the process of decision-making. This paper offers a description of a computer-supported IBIS (written in 'C' using the 'XWindows' user interface), including a discussion of the usefulness of IBIS in design, as well as comments on the role of the computer in IBIS implementation, and related developments in computing.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	c568
authors	Balachandran, M.B. and John S. Gero
year	1987
title	A Model for Knowledge Based Graphical Interfaces
source	AI '87: Proceedings of the Australian Joint Artificial Intelligence Conference. 1987. pp. 505-521. Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R Stanton, North-Holland Pub. 1988. -- CADLINE has abstract only.
summary	This paper describes a model for knowledge-based graphical interface which incorporates a variety of knowledge of the domain of application. The key issues considered include graphics interpretation, extraction of features of graphics objects and identification of prototype objects. The role of such knowledge-based interfaces in computer-aided design is discussed. A prototype system developed in Prolog and C is described and its application in the domain of structural engineering is demonstrated
keywords	user interface, computer graphics, knowledge base, systems, civil engineering, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	5f4b
authors	Coyne, R.D.
year	1988
title	Logic Models of Design
source	Pitman, London
summary	This monograph places design in a theoretical context which applies developments in knowledge-based systems, logic programming and planning to design. It addresses two important design issues: the interpretation of designs, which concerns the discovery of implicit design attributes, a key activity in design evaluation that can be modelled by deductive inference in logic programming; and the process of generation, whereby a design description is produced which exhibits these implicit design attributes. Implicit attributes can be seen as analogous to the semantic content of natural language utterances. The work presented here is mainly concerned with design generation, and an operational model of design is investigated in which operations on processes are treated in a similar way to operations on form. It is argued that there are advantages in representing control knowledge as rules in a design system, and that logic is an effective medium for this purpose. This is demonstrated by means of programs developed in Prolog and C using the example of spatial layout in buildings. Primarily, this book is directed at those in artificial intelligence (AI) involved in logic programming, planning and expert systems. However, since AI techniques are finding widespread application in industry, the use of an architectural design example makes this work relevant to architects, designers, engineers and developers of intelligent architectural design software.
series	other
email
last changed	2003/04/23 15:14

_id	a62c
authors	Flemming, Ulrich, Coyne, Robert F. and Glavin, Timothy J. (et al)
year	1988
title	A Generative Expert System for the Design of Building Layouts -- Version 2
source	Artificial Intelligence in Engineering: Design. editor. John J. Gero. Elsevier (Computational Mechanics Publications), 1988. PP. 445-464 : ill. includes bibliography
summary	The paper describes an attempt to increase the intelligence of a CAD system by adding capabilities (1) to systematically enumerate alternative solutions to a design problem, and (2) to take, at the same time, a broad spectrum of criteria or concerns into account. These capabilities are intended to complement the designer's abilities and performance. In connection with such attempts, fundamental problems arise when the objects to be designed have shape and are located in space. These problems are identified, and an approach to solve them is outlined. This approach is currently being tested over a range of domains all of which deal with the design of layouts of rectangles subject to constraints and criteria. The search for alternatives takes place in a state space with properties that make it possible to systematically explore and evaluate the power of various search strategies or planning paradigms. The state space is established through a domain-independent generator, while the evaluation of points in that space is carried out by a domain-dependent tester built up through a process of knowledge acquisition familiar from work with expert systems
keywords	design, expert systems, CAD, enumeration, shape grammars,architecture, intelligence, synthesis, space allocation, layout, floor plans
series	CADline
email
last changed	2003/06/02 13:58

_id	436b
authors	Gero, John S. (editor)
year	1988
title	Artificial Intelligence in Engineering : Robotics and Processes
source	403 p. Amsterdam: Elsevier/CMP, 1988. CADLINE has abstract only
summary	This volume contains the papers in the robotics and processes areas from the Third International Conference on Artificial Intelligence in Engineering. Robotics has the potential to change the physical face of engineering and has no counterpart in traditional engineering. It requires the integration of numerous disparate aspects of engineering. There is a fundamental requirement for geometric and spatial reasoning of a qualitative kind. A variety of other processes in engineering are being examined through the artificial intelligence lens. The material collected under the process rubric demonstrates both the benefits and potential of utilizing this approach. The papers are presented under the following headings: Robotics; Geometric and Spatial Reasoning; Interpretation Processes; Reasoning Processes; Planning and Scheduling Processes; Interfaces
keywords	AI, robotics, reasoning, planning, user interface, engineering, construction
series	CADline
email
last changed	2003/06/02 13:58

_id	06ee
authors	Gero, John S. (editor)
year	1988
title	Artificial Intelligence in Engineering : Diagnosis and Learning
source	421 p. Amsterdam: Elsevier/CMP, 1988. CADLINE has abstract only
summary	This volume contains the papers in the diagnosis and learning areas from the Third International Conference on Artificial Intelligence in Engineering. Diagnosis and learning are two of the important areas of artificial intelligence of interest to engineering. Diagnosis derives its name from the early systems work related to diagnosing medical disorders. In engineering it has come to mean both diagnosis (in the medical sense) and evaluation or analysis (in the engineering sense). The use of symbolic reasoning has substantially expanded the functions and roles of diagnosis in engineering. Learning is a novel area of computer application in engineering and has no counterpart in traditional engineering but is becoming an important area. The papers in this volume are under the following headings: Diagnosis from Structure and Behavior; Integrated Diagnostic Reasoning; Diagnosis as Control; Diagnosis Processes and Environments; Learning and Tutoring
keywords	AI, learning, engineering, evaluation, analysis, applications
series	CADline
email
last changed	2003/06/02 13:58

_id	8385
authors	Holtz, Neal M. and Rasdorf, William J.
year	1988
title	An Evaluation of Programming Languages and Language Features for Engineering Software Development
source	International Journal of Engineering with Computers. Springer-Verlag, 1988. vol. 3: pp. 183-199
summary	Also published as 'Procedural Programming Languages for the Development of CAD and CAE Systems Software,' in the proceedings of ASME International Conference on Computers in Engineering (1987 : New York, NY). The scope of engineering software has increased dramatically in the past decade. In its early years, most engineering applications were concerned solely with solving difficult numerical problems, and little attention was paid to man- machine interaction, to data management, or to integrated software systems. Now computers solve a much wider variety of problems, including those in which numerical computations are less predominant. In addition, completely new areas of engineering applications such as artificial intelligence have recently emerged. It is well recognized that the particular programming language used to develop an engineering application can dramatically affect the development cost, operating cost. reliability, and usability of the resulting software. With the increase in the variety, functionality, and complexity of engineering software, with its more widespread use, and with its increasing importance, more attention must be paid to programming language suitability so that rational decisions regarding language selection may be made. It is important that professional engineers be aware of the issues addressed in this paper, for it is they who must design, acquire, and use applications software, as well as occasionally develop or manage its development. This paper addresses the need for engineers to possess a working knowledge of the fundamentals of computer programming languages. In pursuit of this, the paper briefly reviews the history of four well known programming languages. It then attempts to identify and to look critically at the attributes of programming languages that significantly affect the production of engineering software. The four procedural programming languages chosen for review are those intended for scientific and general purpose programming, FORTRAN 77, C, Pascal, and Modula-2. These languages are compared and some general observations are made. As it is felt important that professional engineers should be able to make informed decisions about programming language selection, the emphasis throughout this paper is on a methodology of evaluation of programming languages. Choosing an appropriate language can be a complex task and many factors must be considered. Consequently, fundamentals are stressed
keywords	programming, engineering, languages, software, management, evaluation, FORTRAN, C, PASCAL, MODULA-2, CAD, CAE
series	CADline
last changed	2003/06/02 13:58

_id	8a1b
authors	Mackenzie, C.A.
year	1987
title	Inducing Relational Grammars From Design Interpretations
source	AI'87 : Proceeding of the Australian Joint Artificial Intelligence Conference. 1987. pp. 207-220 CADLINE has abstract only.
summary	--- Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R. Stanton, North-Holland Pub. 1988. The combination of a heuristic driven search and a tree systems inference technique to induce context-free design grammars is presented. This is achieved by searching for the most useful interpretations of each design in a sample set and discovering regularities in their tree systems representation. The knowledge induced is represented as an accepting tree systems automation and generative grammar. Examples from the domain of architectural design are given
keywords	heuristics, inference, search, shape grammars, knowledge, representation, architecture
series	CADline
last changed	2003/06/02 13:58

_id	037b
authors	Shapiro, Stuart C. and Rapaport, William J.
year	1988
title	Models and Minds : A Reply to Barnden
source	NAIC-Northeast Artificial Intelligence Consortium, March, 1988. 13 p. : ill. includes bibliography
summary	Cognitive agents, whether human or computer, that engage in natural language discourse and that have beliefs about the beliefs of other cognitive agents must be able to represent objects the way they believe them to be and the way they believe others believe them to be. They must be able to represent other cognitive agents both as objects of beliefs and as agents of beliefs. They must be able to represent their own beliefs, and they must be able to represent beliefs as objects of beliefs. These requirements raise questions about the number of tokens of the belief representation language needed to represent believers and propositions in their normal roles and in their roles as objects of beliefs. This paper explicate the relations among nodes, mental tokens, concepts, actual objects, concepts in the belief spaces of an agent and the agent's model of other agents, concepts of other cognitive agents, and propositions. The discussion is structured as a response to objections raised by another researcher to the authors' earlier papers, and as a demonstration of how they handle an example he claimed the authors could no do
keywords	cognition, AI, natural languages, knowledge, representation, semantic networks
series	CADline
last changed	2003/06/02 10:24

_id	c6d5
authors	Balachandran, M.B.
year	1988
title	A Model for Knowledge-Based Design Optimization [PhD dissertation]
source	Dept. of Architectural Science, University of Sydney
summary	Unpublished. CADLINE has abstract only. This dissertation is concerned with developments in design decision methodologies applied to computer-aided design. The major aim of this research was to design and develop a knowledge-based computer-aided optimization system that has the ability to emulate some of the human performances in design decision processes. The issues and problems involved in developing a knowledge-based system for design optimization are addressed. A knowledge-based methodology to aid design optimization formulation is investigated. The major issues considered include representation of design description, the variety of knowledge required for the formulation process, recognizing optimization formulations, and selection of appropriate algorithms. It is demonstrated that the knowledge-based control of numerical processes leads to efficient and improved decisions in design. In developing knowledge-based systems for computer-aided decision applications an effective human-machine interface is essential. A model for knowledge-based graphical interfaces is proposed. This model incorporates knowledge for graphics interpretation, extraction of features of graphics objects and identification of prototypical objects. An experimental system developed in Prolog and C is demonstrated in the domain of structural design. The system shows one way of combining knowledge-based systems technology with computer graphics and indicates how knowledge-based interfaces improve the system's interactive capabilities. Finally, the system, OPTIMA, is presented. The system is designed as an integrated knowledge-based decision system using frames, rule bases, menu inputs, algebraic computation and optimization algorithms. The system has been written in LISP, Prolog and C and implemented on SUN Microsystems workstations. The performance of the system is demonstrated using two example problems from the domains of structural and architectural design respectively. The knowledge-based approach to design optimization is shown to be considerably easier and more efficient than those using conventional programs.
keywords	Knowledge Base, Systems, CAD, Representation, Design, Frames, Computer Graphics, User Interface, Decision Making
series	CADline
last changed	2003/06/02 13:58

_id	ea6a
authors	Bentley, Jon L.
year	1988
title	More Programming Pearls : Confessions of a Coder
source	207 p. : ill. Reading, Massachusetts: Addison-Wesley Publishing Co., 1988. includes index
summary	A collection of essays demonstrating the various aspects of programming. Some cover programming techniques using the C and AWK languages, other essays discuss making I/O fit for humans and several sub routines
keywords	programming, algorithms, techniques
series	CADline
last changed	2003/06/02 13:58

_id	c57b
authors	Bier, Eric A.
year	1988
title	Snap-Dragging. Interactive Geometric design in Two and Three Dimensions
source	University of California, Berkeley
summary	Graphic artists, mechanical designers, architects, animators, authors of technical papers and others create geometric designs (illustrations and solid models) as a major part of their daily efforts. Some part of this shape construction must be done with precision. For instance, certain line segments should be horizontal, parallel or congruent. In recent years, interactive computer programs have been used to speed up the production of precise geometric designs. These programs take advantage of high-speed graphics, equation solving, and computer input peripherals to reduce the time needed to describe point positions to the machine. Previous techniques include rounding the cursor to points on a rectangular grid, solving networks of constraints, and supporting step-by-step drafting-style constructions. Snap-dragging is a modification of the drafting approach that takes advantage of powerful workstations to reduce the time needed to make precise illustrations. Using a single gravity mapping, a cursor can be snapped to either points, lines or surface. The gravity algorithm achieves good performance by computing intersection points on the fly. To aid precise construction, a set of lines, circles, planes, and spheres, called alignment objects, are constructed by the system at a set of slopes, angles, and distances specified by the user. These alignments objects are constructed at each vertex or edge that the user has declared to be hot (of interest). Vertices and edges can also be made hot by the system through the action of an automatic hotness rule. When snap-dragging is used, shapes can often be constructed using a few more keystrokes than would be needed to sketch them freehand. Objects can be edited at arbitrary orientations and sizes. The number of primitive operations is small, making it possible to provide keyboard combinations for quickly activating most of these operations. The user interface works nearly identically in two or three dimensions. In three dimensions, snap-dragging works with a two-dimensional pointing device in a single perspective view.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	7e15
authors	Kvan, Thomas
year	1997
title	Chips, chunks and sauces
source	International Journal of Design Computing, 1, 1997 (Editorial)
summary	I am sure there is an art in balancing the chunks to use with your chips. Then there is the sauce that envelops them both. I like my chips chunky and not too saucy. Not that I am obsessed with food but I don't think you can consider design computing without chunks. It's the sauce I'm not sure about.The chunks of which I write are not of course those in your salsa picante but those postulated by Chase and Simon (1973) reflecting on good chess players; the chunks of knowledge with which an expert tackles a problem in their domain of expertise. The more knowledge an expert has of complex and large configurations of typical problem situations (configurations of chess pieces), the greater range of solutions the expert can bring a wider to a particular problem. Those with more chunks have more options and arrive at better solutions. In other words, good designs come from having plenty of big chunks available. There has been a wealth of research in the field of computer-supported collaborative work in the contexts of writing, office management, software design and policy bodies. It is typically divided between systems which support decision making (GDSS: group decision support systems) and those which facilitate joint work (CSCW: computer-based systems for co-operative work) (see Dennis et al. (1988) for a discussion of the distinctions and their likely convergence). Most implementations in the world of design have been on CSCW systems, few have looked at trying to make a group design decision support system (GDDSS?). Most of the work in CSCD has been grounded in the heritage of situated cognition - the assumption that collaborative design is an act that is intrinsically grounded in the context within which it is carried out, that is, the sauce in which we find ourselves swimming daily. By sauce, therefore, I am referring to anything that is not knowledge in the domain of expertise, such as modes of interaction, gestures, social behaviours.
series	journal paper
email
last changed	2003/05/15 10:29

_id	651b
authors	Maver, Tom and Wagter, Harry (eds.)
year	1988
title	CAAD futures ‘87 [Conference Proceedings]
source	Second International Conference on Computer Aided Architectural Design Futures / ISBN 0-444-42916-6 / Eindhoven (The Netherlands), 20-22 May 1987, 261 p.
summary	The building Industry is Europe's largest single industry employing directly or indirectly 1 in 8 of the working population; yet it is fragmented, ill-organised and unprogressive. Part at least of the cause can be attributed to a failure by the architectural profession to adopt advances in Information Technology - notably Computer Aided Design. The purpose of the series of conferences on CAAD Futures is to chart a route towards a future in which the outcome of current and continuing research and development results in design tools which are acceptable to practioners and which substantially improve the quality of design decision-making and management. The papers which are printed in these proceedings make a significant contribution to our view of the future. Together they cover the range of issues which are the legitimate concern of researchers, developers, vendors, and users of CAAD software; as might be expected, they raise as many questions as they answer and they pose problems as well as reporting progress.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	cb88
authors	Novak, Marcos J.
year	1988
title	Computational Composition in Architecture
doi	https://doi.org/10.52842/conf.acadia.1988.005
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 5-30
summary	The impact of computers on architectural design, manifested through the creation of architectural designs that equal or surpass in quality and sophistication architecture generated using traditional means, has yet to be demonstrated. Computer-aided design is conspicuously absent from theoretical discussions of architectural design per se, and there exist no major built or published buildings that have been designed using the computer in a true design capacity. Most prominent architects continue to ignore computer-aided design. This paper argues that the issues of architectural theory and composition must be addressed directly by the computer-aided design field, and that until this occurs computer-aided architectural design will necessarily be peripheral to architecture because it does not address the central problems of architecture as an expressive medium. To this end, it proposes a shift to the paradigm of computational composition, and discusses recent work in this direction. The paper is divided into four parts. Part I identifies fundamental theoretical problems, contrasts the application of computation to architecture and to music, and draws upon several different areas for insight into the nature of making; Part II reviews particular architectural implications of these considerations, introduces the concept of computational composition in architecture, and presents a brief overview of important precedents; Part III proposes new goals for computer-aided architectural design and presents a framework for computational composition; finally, Part IV presents recent work directly related to the ideas presented in the previous parts and leads to the Conclusion. The appendices contain a pseudo-Prolog expression of Alvar Aalto's architectural language and notes on features of the PADL-2 solid modeler that are architecturally interesting.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	e05e
authors	Schon, Donald A. and Wigging, Glenn
year	1988
title	Kinds of Seeing and Their Functions in Designing
source	November, 1988. 31 p. : ill
summary	Architectural designing is described as a kind of experimentation that consists in reflective 'conversation' with the materials of a design situation. A designer sees, moves and sees again. Working in some visual medium -- drawing, in the article examples -- the designer sees what is 'there' in some representation of a site, draws in relation to it, and sees what has been drawn, thereby informing further designing. In all this 'seeing' the designer not only visually registers information but also constructs its meaning -- identifies patterns and gives them meaningsÔ h) 000*°° ÔŒ beyond themselves. Words like 'recognize,' 'detect,' 'discover' and 'appreciate' denote variants of seeing, as do such terms as 'seeing that,' 'seeing as' and 'seeing in.' The purpose here is to explore the kinds of seeing involved in designing and to describe their various functions. At local and global levels, and in many different ways, designing is an interaction of making and seeing, doing and discovering. On the basis of a few minuscule examples, the authors suggest some of the ways in which this sort of interaction works. Some conditions that enable it to work are described. And some of its consequences for design education and for the development of computer environments useful to designers are drawn
keywords	design methods, education, architecture, cognition, perception, design process, semantics, protocol analysis
series	CADline
last changed	2003/06/02 13:58

_id	41b9
authors	Tzamir, Yigal and Churchman, Arza
year	1988
title	An Ethical Perspective On Knowledge in Architectural Education
source	1988. pp. 1-17 : 5 maps. includes bibliography
summary	This article focused upon the cognitive source of knowledge that can be used in the architectural decision-making process, and upon the ethical positions that can be taken to justify their use. The educational implications of the relationship between these two spheres is examined in a study of the reported design behavior and attitudes of architecture students
keywords	architecture, education, ethics, knowledge
series	CADline
last changed	2003/06/02 10:24

_id	8c9e
authors	Zohar, Ruth and Shaviv, Edna
year	1988
title	A Decision-Making Model for Optimizing Solar Retrofit : Solar Vis-A-Vis Conservation
source	1988? pp. [5] : ill. : tables. includes bibliography
summary	A decision making model for selecting the optimal or quasi optimal solar retrofit design solutions for low-income residential buildings is presented. The model can serve the architect as a tool and provide guidance on how to improve the building's thermal performance during the different design stages. The model allows him to consider the contribution of energy conservation solutions vis-a-vis solar energy gains solutions based on accumulating knowledge of design precedents. It also allows the use of different strategies for searching the solutions that best fits the different design stages. The sensitivity of the suggested decision making model was checked and satisfactory results obtained
keywords	decision making, energy, architecture, optimization, conservation, simulation, precedents, knowledge
series	CADline
email
last changed	2003/06/02 10:24

_id	2a36
authors	Ben-Moshe, R. and Sorgen, A.
year	1988
title	Parametric Shape Definition by Example
source	12, [13] p., [7] p. of ill. Israel: MICROCAD, 1988(?). includes bibliography
summary	Incorporation of parametric design facilities into CAD systems presents some serious problems. The major issues are: (1) functionality - the need to cater for a great variety of designs, (2) natural user interface, with no need for the user to acquire programming skills, (3) integration and consistency with the 'host' CAD environment
keywords	parametrization, user interface, CAD, geometric modeling, mechanical engineering, CAM
series	CADline
last changed	2003/06/02 13:58

For more results click below: