Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 159

Reformat results as: short short into frame detailed detailed into frame

_id	0711
authors	Kunnath, S.K., Reinhorn, A.M. and Abel, J.F.
year	1990
title	A Computational Tool for Evaluation of Seismic Performance of RC Buildings
source	February, 1990. [1] 15 p. : ill. graphs, tables. includes bibliography: p. 10-11
summary	Recent events have demonstrated the damaging power of earthquakes on structural assemblages resulting in immense loss of life and property (Mexico City, 1985; Armenia, 1988; San Francisco, 1989). While the present state-of-the-art in inelastic seismic response analysis of structures is capable of estimating response quantities in terms of deformations, stresses, etc., it has not established a physical qualification of these end-results into measures of damage sustained by the structure wherein system vulnerability is ascertained in terms of serviceability, repairability, and/or collapse. An enhanced computational tool is presented in this paper for evaluation of reinforced concrete structures (such as buildings and bridges) subjected to seismic loading. The program performs a series of tasks to enable a complete evaluation of the structural system: (a) elastic collapse- mode analysis to determine the base shear capacity of the system; (b) step-by-step time history analysis using a macromodel approach in which the inelastic behavior of RC structural components is incorporated; (c) reduction of the response quantities to damage indices so that a physical interpretation of the response is possible. The program is built around two graphical interfaces: one for preprocessing of structural and loading data; and the other for visualization of structural damage following the seismic analysis. This program can serve as an invaluable tool in estimating the seismic performance of existing RC buildings and for designing new structures within acceptable levels of damage
keywords	seismic, structures, applications, evaluation, civil engineering, CAD
series	CADline
last changed	2003/06/02 14:41

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	5f4b
authors	Coyne, R.D.
year	1988
title	Logic Models of Design
source	Pitman, London
summary	This monograph places design in a theoretical context which applies developments in knowledge-based systems, logic programming and planning to design. It addresses two important design issues: the interpretation of designs, which concerns the discovery of implicit design attributes, a key activity in design evaluation that can be modelled by deductive inference in logic programming; and the process of generation, whereby a design description is produced which exhibits these implicit design attributes. Implicit attributes can be seen as analogous to the semantic content of natural language utterances. The work presented here is mainly concerned with design generation, and an operational model of design is investigated in which operations on processes are treated in a similar way to operations on form. It is argued that there are advantages in representing control knowledge as rules in a design system, and that logic is an effective medium for this purpose. This is demonstrated by means of programs developed in Prolog and C using the example of spatial layout in buildings. Primarily, this book is directed at those in artificial intelligence (AI) involved in logic programming, planning and expert systems. However, since AI techniques are finding widespread application in industry, the use of an architectural design example makes this work relevant to architects, designers, engineers and developers of intelligent architectural design software.
series	other
email
last changed	2003/04/23 15:14

_id	4086
authors	Ervin, Stephen M.
year	1988
title	Computer-Aided Diagramming and the `Generator-Test' Cycle
source	1988. 22 p.: ill. includes bibliography
summary	Simon's `generator-test' model is both a metaphor and a literal prescription for the organization of computer systems for designing. In most approaches to computer-aided design, one side of the cycle - generating or testing - is reserved to the human designer, the other side delegated to the computer. A more comfortable and comprehensive approach is to support switching these roles between designer and computer. This approach underlies a prototype system for computer-aided diagramming, the CBD (Constraint-Based Diagrammer). Diagramming is an important design activity, especially in preliminary design, as diagrams play a pivotal role between graphic and symbolic knowledge. Diagrams as a medium of knowledge representation and as means of inference have an ambivalent status in the generator-test model; they may serve either purpose. Examination of CBD sheds some light on Simon's model and on the requirements for sharing generating and testing with computational design tools
keywords	problem solving, CAD, constraints, evaluation, synthesis
series	CADline
last changed	2003/06/02 13:58

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	a62c
authors	Flemming, Ulrich, Coyne, Robert F. and Glavin, Timothy J. (et al)
year	1988
title	A Generative Expert System for the Design of Building Layouts -- Version 2
source	Artificial Intelligence in Engineering: Design. editor. John J. Gero. Elsevier (Computational Mechanics Publications), 1988. PP. 445-464 : ill. includes bibliography
summary	The paper describes an attempt to increase the intelligence of a CAD system by adding capabilities (1) to systematically enumerate alternative solutions to a design problem, and (2) to take, at the same time, a broad spectrum of criteria or concerns into account. These capabilities are intended to complement the designer's abilities and performance. In connection with such attempts, fundamental problems arise when the objects to be designed have shape and are located in space. These problems are identified, and an approach to solve them is outlined. This approach is currently being tested over a range of domains all of which deal with the design of layouts of rectangles subject to constraints and criteria. The search for alternatives takes place in a state space with properties that make it possible to systematically explore and evaluate the power of various search strategies or planning paradigms. The state space is established through a domain-independent generator, while the evaluation of points in that space is carried out by a domain-dependent tester built up through a process of knowledge acquisition familiar from work with expert systems
keywords	design, expert systems, CAD, enumeration, shape grammars,architecture, intelligence, synthesis, space allocation, layout, floor plans
series	CADline
email
last changed	2003/06/02 13:58

_id	476d
authors	Gero, J. and Maher, M.
year	1988
title	Future Roles of Knowledge-based Systems in the Design Process
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 81-90
summary	This paper examines the future roles of knowledge-based systems in the design process. It commences with a brief review of computer-aided design and knowledge-based systems prior to examining the present and future roles of knowledge-based systems in design under the headings of: design analysis/formulation; design synthesis; and design evaluation. The paper concludes with a discussion on design integration, novel design, and detail design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	06ee
authors	Gero, John S. (editor)
year	1988
title	Artificial Intelligence in Engineering : Diagnosis and Learning
source	421 p. Amsterdam: Elsevier/CMP, 1988. CADLINE has abstract only
summary	This volume contains the papers in the diagnosis and learning areas from the Third International Conference on Artificial Intelligence in Engineering. Diagnosis and learning are two of the important areas of artificial intelligence of interest to engineering. Diagnosis derives its name from the early systems work related to diagnosing medical disorders. In engineering it has come to mean both diagnosis (in the medical sense) and evaluation or analysis (in the engineering sense). The use of symbolic reasoning has substantially expanded the functions and roles of diagnosis in engineering. Learning is a novel area of computer application in engineering and has no counterpart in traditional engineering but is becoming an important area. The papers in this volume are under the following headings: Diagnosis from Structure and Behavior; Integrated Diagnostic Reasoning; Diagnosis as Control; Diagnosis Processes and Environments; Learning and Tutoring
keywords	AI, learning, engineering, evaluation, analysis, applications
series	CADline
email
last changed	2003/06/02 13:58

_id	8385
authors	Holtz, Neal M. and Rasdorf, William J.
year	1988
title	An Evaluation of Programming Languages and Language Features for Engineering Software Development
source	International Journal of Engineering with Computers. Springer-Verlag, 1988. vol. 3: pp. 183-199
summary	Also published as 'Procedural Programming Languages for the Development of CAD and CAE Systems Software,' in the proceedings of ASME International Conference on Computers in Engineering (1987 : New York, NY). The scope of engineering software has increased dramatically in the past decade. In its early years, most engineering applications were concerned solely with solving difficult numerical problems, and little attention was paid to man- machine interaction, to data management, or to integrated software systems. Now computers solve a much wider variety of problems, including those in which numerical computations are less predominant. In addition, completely new areas of engineering applications such as artificial intelligence have recently emerged. It is well recognized that the particular programming language used to develop an engineering application can dramatically affect the development cost, operating cost. reliability, and usability of the resulting software. With the increase in the variety, functionality, and complexity of engineering software, with its more widespread use, and with its increasing importance, more attention must be paid to programming language suitability so that rational decisions regarding language selection may be made. It is important that professional engineers be aware of the issues addressed in this paper, for it is they who must design, acquire, and use applications software, as well as occasionally develop or manage its development. This paper addresses the need for engineers to possess a working knowledge of the fundamentals of computer programming languages. In pursuit of this, the paper briefly reviews the history of four well known programming languages. It then attempts to identify and to look critically at the attributes of programming languages that significantly affect the production of engineering software. The four procedural programming languages chosen for review are those intended for scientific and general purpose programming, FORTRAN 77, C, Pascal, and Modula-2. These languages are compared and some general observations are made. As it is felt important that professional engineers should be able to make informed decisions about programming language selection, the emphasis throughout this paper is on a methodology of evaluation of programming languages. Choosing an appropriate language can be a complex task and many factors must be considered. Consequently, fundamentals are stressed
keywords	programming, engineering, languages, software, management, evaluation, FORTRAN, C, PASCAL, MODULA-2, CAD, CAE
series	CADline
last changed	2003/06/02 13:58

_id	0347
authors	Maver, T.
year	1988
title	Software Tools for the Technical Evaluation of Design Alternatives
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 47-58
summary	Designing buildings which 'work' - economically, socially and technically - remains the central challenge for architects. This paper is concerned with the state of development of software tools for the evaluation of the technical issues which are relevant at the conceptual stages, as opposed to the detailed stages, of design decision-making. The technical efficiency of building is of enormous economic importance. The capital investment in building in Europe represents some 12% of the Gross Domestic Product; this capital investment is exceeded by an order of magnitude, however, by the operating costs of buildings over their life span. In turn, these operating costs are exceeded - again by an order of magnitude - by the costs associated with the (human) operations which go on within the building, and on which the design of the building has some impact.
series	CAAD Futures
email
last changed	2001/06/04 17:16

_id	45b7
authors	Oxman, R.E.
year	1988
title	Expert System for Generation and Evaluation in Architectural Design
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	The research field, focuses on a new research area of Knowledge Based Systems for Architectural Design. The research deals with concepts and tools emerging from Artificial Intelligence, Knowledge Based Systems and Expert Systems. The research is involved with the construction of a theoretical basis for the development of approaches and methods for the representation and control of design knowledge as a reasoning process. Key questions which attempt to reconsider representation and control in design are formulated. The following questions serve as a research framework out of which new approaches, methods and tools were developed. (1.)What are the existing ideas, methods and tools in Expert Systems? (2.) What are the performance characteristics of Expert Systems in Architectural Design ? (3.) What are the desired operative characteristics and interactions for Expert Systems in design ? (4.) How is it possible to formulate and apply the diverse forms of Architectural Knowledge in Expert Systems for design? (5.) What are the problems of implementation in the development of Expert Systems for design ? The state of the art in knowledge based systems is surveyed, while emphasizing the differences between conventional systems and knowledge based systems. Representation and control methods and the components of expert systems are reviewed. Expert systems for diagnosis, interpretation, planning and design are analysed with respect to their performance characteristics. Techniques and technologies of existing tools are defined. An expert system for the generation and evaluation of ill defined architectural design problems is develped. A formalization of the concept of 'design interpretation' is proposed and developed. It is applied in the process of defining and classifying the performance characteristics of expert systems for design. This concept is based upon two sets of reasoning processes: those which enable a mapping between design requirements and solution descriptions in the generation stage of design and those between solution descriptions and performance evaluation in the evaluation stage of design. On the basis of the formalization of this concept, an expert system capable of integrating various modes of performance is proposed and developed. The system functions as a 'design generator', a 'design critic', or a' design critic-generator'. These modes, which integrate generation and evaluation in the same system, operate by employing both forward chaining and backward chaining inference mechanisms. As a result of the examination of desired forms of interactions, a new approach for dual direction interpretation between graphic and verbal modes is developed. This approach reflects the importance of both graphical and verbal expression in design. The approach is based upon a simultaneous mapping between symbolic-verbal interpretation and graphic interpretation. The work presents the mapping process through the concept of design interpretation, employing geometrical knowledge, typological knowledge and evaluation knowledge. A tool which provides communication between an expert system and a graphic system was developed and is presented. The importance of such a tool in expert systems for design resides in the provision of free choice to the user for interacting with the system either graphically or verbally during the design process. An additional component in the development of knowledge-based systems for design is related to the important question of knowledge definition and the representational schemata of design knowledge. A new representational scheme for complex architectural knowledge, termed 'The generation and refinement scheme of a design prototype' is proposed and developed. Its operation as part of a total integrated design system is demonstrated. The scheme is based upon the structures of knowledge of design precedents which constitute typical situations and solutions in architectural design. This scheme provides an appropriate representation for the two types of knowledge which operate in a refinement process of a design prototype. Generative knowledge describes the solution space by predefined refinement stages; interpretive knowledge enables their selection. The examination of representational methods for the proposed scheme indicated that employing a single representational method lacked enough generalization and expressive power for the needs of the design knowledge structures. It was found that a way to represent complex structures is through the integration of multiple methods of representation, each one according to the knowledge characteristics. In order to represent the proposed scheme of design knowledge, a unique method was developed which integrates both rules and frames. The method consists of a rules-frames-rules structure for the representation of a design prototype. An approach is developed for the implementation of these concepts in an expert system for design. PRODS: A prototype based expert system shell for design is developed and demonstrated. The system consists of three basic components: a rule-based expert system shell, a frame system, and a knowledge base interface. All system interactions are controlled by the inference engine. It passes control between the rule-base and the frame-base inference engines, and provides communications between the rule-based and frame-based representations. It is suggested that expert system can interface with external CAD systems including graphics, communicating through a central representation. These concepts and developments are demonstrated in two implementations. The PREDIKT system for the preliminary design of the residential kitchen; the PROUST system for the selection and refinement of dwelling types. PREDIKT demonstrates the integration of rules and a graphical-verbal interpreter; in addition, PROUST demonstrates the significance of hybrid representation in the generation and refinement processes. The results and conlusions are summarized. Future research agenda within the field of knowledge-based systems for design is discussed, and potential research areas are defined.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	0e5d
authors	Reed, Raymond D.
year	1988
title	The Teaching of Computer Assisted Sustainable Architectural Design
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 111-122
doi	https://doi.org/10.52842/conf.acadia.1988.111
summary	Sustainable architecture is high-tech, energy and resource conserving architecture that sustains and increases the human and natural carrying capacity of the host environment. This paper presents a computer assisted design process to teach sustainable architectural design. The energy performance of a base case building in each of four climates and cultures is presented. The climates are: Phoenix (hotdry), Minneapolis (cold-dry), Boston (cold-humid), and New Orleans ( hot- humid). Keeping the host climate, site, building size and function constant: but varying materials, shape and design concepts, each base case is iterated through a series of computer assisted re-designs to transform each base case building into an architecture representative of its regional climate and culture. Traditional technologies and concepts produce traditional regional architecture. New technologies and concepts produce forms expressive of an emerging high-tech, high-touch, low energy society. The paper presents computer generated work by the author and his students. It also presents an interim evaluation of the successes and difficulties of conducting a 'paper free' design studio.
series	ACADIA
last changed	2022/06/07 08:00

_id	2622
authors	Schmitt, G.
year	1988
title	Expert Systems and Interactive Fractal Generators in Design and Evaluation
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 91-106
summary	Microcomputer based interactive programmable drafting programs and analysis packages are setting new standards for design support, systems in architectural offices. These programs allow the representation and performance simulation of design proposals with one tool, but they lack the ability to represent knowledge concerning relations between design and artifact. While they can expediate the traditional design and analysis process, they do not fundamentally improve it. We shall describe three computationally related approaches which could be a step towards a necessary paradigm change in developing design software. These approaches deal with expert design generators and evaluators, function oriented programming, and fractal design machines.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	fc80
authors	Ubbelohde, S. and Humann, C.
year	1998
title	Comparative Evaluation of Four Daylighting Software Programs
source	1998 ACEEE Summer Study on Energy Efficiency in Buildings Proceedings. American Council for an Energy-Efficient Economy
summary	By the mid-1980's, a number of software packages were under development to predict daylighting performance in buildings, in particular illumination levels in daylighted spaces. An evaluation in 1988 by Ubbelohde et al. demonstrated that none of the software then available was capable of predicting the simplest of real daylighting designs. In the last ten years computer capabilities have evolved rapidly and we have four major packages widely available in the United States. This paper presents a comparative evaluation from the perspective of building and daylighting design practice. A contemporary building completed in 1993 was used as a base case for evaluation. We present the results from field measurements, software predictions and physical modeling as a basis for discussing the capabilities of the software packages in architectural design practice. We found the current software packages far more powerful and nuanced in their ability to predict daylight than previously. Some can accurately predict quantitative daylight performance under varying sky conditions and produce handsome and accurate visualizations of the space. The programs differ significantly, however, in their ease of use, modeling basis and the emphasis between quantitative predictions and visualization in the output.
series	other
last changed	2003/04/23 15:50

_id	abaf
authors	Veenstra, Jack and Ahuja, Narendra
year	1988
title	Line Drawings of Octree- Represented Objects
source	ACM Transactions on Graphicsò January, 1988. vol. 7: pp. 61-75 : ill. includes bibliography.
summary	The octree structure represents the space occupied by an object as a juxtaposition of cubes. The octree structure is highly sensitive to object location and orientation, and the three-dimensional shape of the represented object is obscured. It is helpful to be able to see the actual object represented by an octree, especially for visual performance evaluation of octree algorithms. This paper presents a display algorithm that helps visualize the three-dimensional space represented by the octree. Given an octree, the algorithm produces a line drawing of the object represented by the octree, using parallel projection, from any specified viewpoint with hidden lines removed. Example of some line drawing produced by the algorithm are given. The complexity of the algorithm is also discussed
keywords	hidden lines, drawings, solid modeling, representation, octree, display, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	0220
authors	Woodwark, J.R.
year	1988
title	Eliminating Redundant Primitives from Set- Theoretic Solid Models by a Consideration of Constituents
source	16 p. : ill. Winchester: IBM UK Scientific Center, IBM United Kingdom Laboratories Limited, April, 1988. IBM UKSC Report 188. includes bibliography
summary	Set-theoretic solid models often contain redundant primitives, which slow down rendering and other processes. They are not simple to remove, especially as there can be alternative eliminations that may not be equally desirable. There has been recent progress towards solving this problem, but existing techniques for eliminating such redundant primitives do not fully consider the possibilities and rely on repeated evaluation of parts of the object's boundary, a process that is likely to be very slow. This article proposes a technique that allows alternative eliminations to be examined, and outlines a potentially efficient, but geometrically approximate, method of implementation
keywords	solid modeling, CSG, primitives, algorithms
series	CADline
last changed	2003/06/02 13:58

_id	b0f7
authors	Martens, Bob
year	1992
title	A FINISHING TOUCH TO THE FULL-SCALE LABORATORY AT THE UNIVERSITY OF TECHNOLOGY IN VIENNA
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 7-14
summary	The development planning of the full-scale laboratory at the Vienna University of Technology was already presented to the third E.F.A. Conference in Lund (1990). Exchange of experience has greatly encouraged us to take all measures necessary for an immediate provisional operation. Working experience was of considerable significance regarding reconstruction work having repeatedly been postponed ever since 1988. This paper deals with the Vienna full-scale laboratory in its ultimate form and all the equipment designed therefore. Summarizingly, the further measures for operation are being considered.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:30

_id	0350
authors	Norman, Richard B.
year	1988
title	The Role of Color in Architectural Pedagogy Computation as a Creative Tool
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 217-223
doi	https://doi.org/10.52842/conf.acadia.1988.217
summary	From among the possible ways of introducing graphic computing in the design studio, it is customary to develop an argument from point, to line, to shape and finally to colon The logic of this process is undeniable as technology and perhaps as history, but it should be questioned as pedagogy. A designer, tuned to the visual focus of the studio and searching for creative self-expression is not overly stimulated by drawing lines, at first laboriously, in imitation of what he can do by hand. Using color is among the more difficult of traditional studio chores -- it is not difficult on a computer. The manipulation of color can be a simple task if one is given reasonable software and a good graphic computer. Once introduced to students, the techniques for coloring elements on a computer find acceptance as a design tool. Methods can be quickly found for modifying the perception of space and form through the use of colon Modern architecture is rooted in the study of color as a generator of form. This idea permeated the teachings of its founders. Yet modernist concern for color has over time evolved into a pedagogy of space and form at the exclusion of color, so much so that the modern movement today stands accused by its detractors as being formed in many shades of grey. Modern architecture is not grey! This paper will illustrate how, using the modern graphic computer, color may be introduced to the studio and discovered as an element of design and as the substance of architectural form giving.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	8e77
authors	Rubinger, Morton
year	1988
title	Drawing Lessons from Word Processing
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 235-245
doi	https://doi.org/10.52842/conf.acadia.1988.235
summary	Word processing is universally successful as a computer application whereas computer-aided design is not. What can we learn from word processing? It tells us that, to be successful, an entry-level CAD system should be basic and focus mainly on drawing and manipulation of drawings rather than on sophisticated operations and automation, it should be simple, easy to use and moderate in cost. In architectural education, it should be used in the early stages of design to enhance design quality and design learning. To do this, we need to understand the characteristics of this new drawing and design medium. Software needs to be thoroughly learned in advance of studio use, and computer-based studio projects should take a computational view of design to enhance the effective use of computers in learning to design.
series	ACADIA
last changed	2022/06/07 07:56

For more results click below: