Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 198

Reformat results as: short short into frame detailed detailed into frame

_id	315caadria2004
id	315caadria2004
authors	Kuo-Chung Wen, Wei-Lung Chen
year	2004
title	Application of Genetic Algorithms to Establish Flooding Evacuation Path Model in Metropolitan Area
doi	https://doi.org/10.52842/conf.caadria.2004.557
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 557-570
summary	This research has shown the difficulties associated with the GIS and the flooding evacuation path search through the huge searching space generated during the network analysis process. This research also presents an approach to these problems by utilizing a search process whose concept is derived from natural genetics. Genetic algorithms (GAs) have been introduced in the optimization problem solving area by Holland (1975) and Goldberg (1989) and have shown their usefulness through numerous applications. We apply GA and GIS to choice flooding evacuation path in metropolitan area in this study. We take the region of Shiji city in Taiwan for case. That could be divided into four parts. First, is to set the population of GA operation. Second, is to choose crossover and mutation. Third, is to calculate the fitness function of each generation and to select the better gene arrangement. Fourth, is to reproduce, after evolution, we can establish Flooding Evacuation Path that more reflect really human action and choice when flood takes place. However we can apply GA to calculate different evacuation path in different time series. Final, we compare and establish real model of evacuation path model to choosing flooding evacuation path.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ddss2004_d-63
id	ddss2004_d-63
authors	Wen, K.-C. and W.-L. Chen
year	2004
title	Applying Genetic Algorithms to Establish Disaster Decision Support System for Flooding Evacuation Path of Hsichih Area in Taiwan
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 63-75
summary	Because of the special geography features and subtropics weather in Taiwan, we need to provide correct information to help people making decision when they are in disaster. So the disaster decision support system must offer proper information of evacuation path to people. This research has shown the difficulties associated with the GIS and the flooding evacuation path search through the huge searching space generated during the network analysis process. This research also presents an approach to these problems by utilizing a search process whose concept is derived from natural genetics. Genetic algorithms (GAs) have been introduced in the optimization problem solving area by Holland (1975) and Goldberg (1989) and have shown their usefulness through numerous applications. We apply GA and GIS to choice flooding evacuation path in metropolitan area in this study. We take the region of Shiji city in Taiwan for case. Firstly, we establish the node relationship of GA calculation, the level of the weight is the standard of the date that is exported by Disaster Database. Secondly, we apply GA to calculate different evacuation path in different time series. Finally, we build the model of choosing flooding evacuation path.
keywords	Genetic Algorithms, Decision Support System, GIS, Evacuation Path
series	DDSS
last changed	2004/07/03 22:13

_id	4bf3
authors	Blinn, James F.
year	1989
title	Optimal Tubes
source	IEEE Computer Graphics and Applications. September, 1989. vol. 9: pp. 8-13 : ill. (some col.)
summary	The author discusses how to cut down the number of polygons required to model and render the Voyager spacecraft. The geometric problem is to find the tangent lines from a point to a circle. There are two ways to go about solving this, one using garden-variety analytical geometry and the other using high tech homogeneous coordinates. The author in this column discusses the simple way
keywords	programming, geometry, algorithms, computer graphics, techniques
series	CADline
last changed	2003/06/02 13:58

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8bdf
authors	Crocker, Gary A. and Reinke, William F.
year	1989
title	Boundary Evaluation in a Non-Manifold Environment
source	November, 1989. 30 p., [16] p. of ill. includes bibliography
summary	The recent availability of Non-Manifold Topology (NMT) enables the coexistence of wireframe geometry, surfaces, and solids in a single representation with complete topological resolution. This in turn allows a new approach to boundary evaluation. This new approach merges a set of primitives into a single Boundary REPresentation (B-rep), and selects the desired Boolean results without destroying any B-rep entities. The results of the Boolean operations are displayed by drawing only selected entities. The B-rep resulting from the merge contains a complete description of the input primitives. While traditional algorithms allow incremental addition of primitives, this new approach also allows incremental deletion of primitives from the merged B-rep. Changes in Boolean operators and/or their order of evaluation can be reflected in the B-rep simply by changing the criteria of the selection process. Constructive Solid Geometry (CSG) editing operations can be mirrored in the B-rep incrementally, i.e. without performing complete reevaluation of the B-rep from its constituent primitive definitions. In addition, the domain of boundary evaluation has been extended to include Boolean operations between wireframe geometry, surfaces, and solids. This new approach has been successfully implemented and tested to boundary evaluation. Test results have shown an order of magnitude reduction in the cost associated with reflecting CSG editing operations on existing B-reps, with only minimal additional cost for initial construction. Also shown are examples of Boolean operations between solids, surfaces, and wires
keywords	computational geometry, boolean operations, solid modeling, B-rep, CSG, representation, topology, curved surfaces, intersection, curves,
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	22bd
authors	Hoffmann, C.M., Hopcroft, J.E. and Karasick, M.S.
year	1989
title	Robust Set Operations on Polyhedral Solids
source	IEEE Computer Graphics and Applications. November, 1989. vol. 9: pp. 50-59 : ill. includes bibliography
summary	The paper describes an algorithm for performing regularized Boolean operations on polyhedral solids. Robustness is achieved by adding symbolic reasoning as a supplemental step to resolve possible numerical uncertainty. Additionally, numerical redundancy and numerical computation based on derived quantities are reduced as much as possible. It also discusses the authors' experience with the implementation of the algorithm
keywords	algorithms, polyhedra, solids, representation, computational geometry, geometric modeling, boolean operations
series	CADline
last changed	2003/06/02 14:41

_id	f4fb
authors	Karasick, Michael
year	1989
title	On the Representation and Manipulation of Rigid Solids
source	McGill University, Department of Computer Science, Montreal
summary	Solid modeling studies how to represent geometric properties of solids by computer. A fundamental operation is the construction of representations of solids. Algorithms for set operations construct boundary representations of solids from boundary representations of other solids. A correct and efficient intersection algorithm for polyhedral solids that uses boundary representations is described. A finite-precision implementation of the algorithm uses incidence tests that use symbolic inference in order to limit errors due to finite-precision approximations. The incidence tests are described and experimental evidence is presented to show that the incidence tests are both empirically reliable and practical. The intersection algorithm uses a new boundary representation called the Star-Edge representation. A complementation algorithm for solids that uses the new representation is given, and an algorithm is given that uses the new representation to determine if two boundary representations describe the same solid. A canonical boundary representation for solids is described and used to prove a lower bound for the same-object problem.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	21b5
authors	Müller, Volker
year	1993
title	Introducing CAD to a Big Corporation
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 497-512
summary	The report presents the ongoing activity of introducing CAD to the entire range of facilities planning and management of the Frankfurt Airport Corporation. It addresses issues of organizing the shift from conventional to computer supported planning and facilities management,- the problems of training professionals with various background in the use of new tools; aspects of data validity; regulation of data exchange; and customization of software to the needs of special tasks within the corporation. The report is based on about four years of project runtime. The preparation of the project started in fall 1988. The project proper started in June 1989. It is entering its last year. Up to now about 120 persons have been trained to use CAD.
keywords	CAD Introduction, Corporation Setting, Adult Education, Data Integrity, Data Security, Data Exchange, Linkage Between Geometric and Alphanumeric Data, Customized Systems
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4443
authors	Patterson, D.W.
year	1989
title	Introduction to Artificial Intelligence and Expert Systems
source	Prentice-Hall International, p. 11
summary	A textbook for upper division undergraduate and first year graduate courses. Assumes basic computer science courses and a general maturity in mathematics.
series	other
last changed	2003/04/23 15:14

_id	03f1
authors	Smeltzer, Geert T.A.
year	1989
title	A CAAD Curriculum
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f8c
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.5.1-5.5.12
summary	This paper is about the backgrounds, the present state, the results and the future expectations of the curriculum of Calibre, at the Faculty of Architecture and Building Science of the Eindhoven University of Technology. It will also touch upon the relationships with project work in our field but also in other fields of our Architectural (and Building) education. In the paper it is emphasised that teachers need to create a need for the use of certain features of computer systems. To make students aware of the (possible) CAD needs and answering to those needs at a more or less individual way asks a high level of understanding of the underlying concept and features of the CAD systems. Because of the flexibility (amongst other qualities), we, and so many others, have made a choice to use AutoCAD as 8 kind of thread that runs through our curriculum continuously and that exists out of 6 main parts. These parts vary from an introduction to Integrated Data Processing via CADD, Graphics and Data Structures and Expert Systems to System Development Methods. Half of our curriculum Is compulsory for all the faculty students, the other half is facultative but very well attended.
series	eCAADe
last changed	2022/06/07 07:50

_id	7812
authors	Straber, W. and Seidel, H.-P. (eds.)
year	1989
title	Theory and Practice of Geometric Modeling
source	Springer-Verlag
summary	This book originates from the lectures given at the international conference "Theory and Practice of Geometric Modeling", Blaubeuren, FRG, October 3-7, 1988, that brought together leading experts from universities, system developers, and system users, to discuss new concepts and future trends in geometric modeling. The book covers a variety of topics on an advanced level and is organized as follows. Part A contains new algorithms and techniques for modeling objects that are bounded by free form surfaces. Part B focuses on surface/surface intersections, new types of blending surfaces and speed ups for ray tracing. Part C contains some new geometric tools. Part D discusses different representation schemes in solid modeling, conversions between these different schemes, and some applications. Part E covers some issues of product modeling, automatic tolerancing, high level specification of solid models (constraints, features) and the need for better user interfaces.
series	other
last changed	2003/04/23 15:14

_id	6fd7
authors	Upstill, S.
year	1989
title	The RenderMan Companion
source	Reading: Addison-Wesley
summary	This important book is designed as a tutorial for graphics programmers and provides a strong introduction to using RenderManTM, software developed by Pixar, the computer graphics division of Lucasfilm, Ltd. It provides the reader with the information necessary to start generating impressive images that convincingly compete with photography.
series	other
last changed	2003/04/23 15:14

_id	0ecb
authors	Waerum, Jens and Rüdiger Kristiansen, Bjarne
year	1989
title	CAAD Education at the School of Architecture Copenhagen
doi	https://doi.org/10.52842/conf.ecaade.1989.x.q8k
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.5.1-4.5.9
summary	The establishment of Datacentret (the Data Centre) in summer 1985 was preceded by 15 years slow- moving, arduous work from the early experiments in what was then the computing laboratory under the supervision of architect Per Jacobi, author of the Danish 3D drawing system MONSTER, until 1984, when a special committee was commissioned to draw up proposals for the introduction of teaching in computing at the Architects School. In spring 1985 the school administrators decided that a central computer workshop should be set up and in cooperation with the school's institutes placed jointly in charge of instructing teachers and students, carrying out research and development within the field of architecture and taking steps to work out a curriculum of supplementary training for practising architects. With the aid of a special grant, 12 PC's were successfully acquired in the 2 years that followed, as well as a screen projector and other peripherals.
series	eCAADe
last changed	2022/06/07 07:50

_id	2786
authors	Woodwark, J.R.
year	1989
title	Splitting Set-Theoretic Solid Models into Connected Components
source	10 p. : ill. Winchester: IBM UK Scientific Center, IBM United Kingdom Laboratories Limited, June, 1989. IBM UKSC 210. includes bibliography In general, there is no way to tell how many pieces (connected components) a set-theoretic (CSG) solid model represents, except via conversion to a boundary model. Recent work on the elimination of redundant primitives has been linked with techniques for identifying connected components in quad-trees and oct-trees into a strategy to attack this problem. Some success has been achieved, and an experimental Prolog program, working in two dimensions, that finds connected components and determines the set-theoretic representation of each component, is reported, and further developments proposed. CSG / quadtree / octree / primitives / algorithms. 43. Woodwark, J. R. and Quinlan K. M. 'Reducing the Effect of Complexity on Volume Model Evaluation.' Computer Aided Design. April, 1982. pp. 89-95 : ill. includes bibliography.
summary	A major problem with volume modelling systems is that processing times may increase with model complexity in a worse than linear fashion. The authors have addressed this problem, for picture generation, by repeatedly dividing the space occupied by a model, and evaluating the sub-models created only when they meet a criterion of simplicity. Hidden surface elimination has been integrated with evaluation, in such a way that major portions of the model which are not visible are never evaluated. An example demonstrates a better than linear relationship between model complexity and computation time, and also shows the effect of picture complexity on the performance of the process
keywords	CAD, computational geometry, solid modeling, geometric modeling, algorithms, hidden surfaces, CSG
series	CADline
last changed	2003/06/02 13:58

_id	0e93
authors	Af Klercker, Jonas
year	1989
title	Interactive Animation on the Macintosh II
doi	https://doi.org/10.52842/conf.ecaade.1989.x.a0t
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.5.1-9.5.6
summary	The efficiency of images in communication between humans has so far been used almost exclusively by TV and other mass medias. The costs have been too great to encourage the use of images in the financially restricted everyday practice of architecture. With a range of application programs for the Apple Macintosh II the vision has come close to reality. It is now possible to create guided walks with the chance to choose different routes and views in a model of buildings and surroundings in 256 colour graphics. The makers of these programs may not have foreseen this use for their products and that is why it takes quite a lot of effort to make all the necessary images. With some supplementary routines however, this will be made much easier. Animation can also be used to visualize different processes inside a building. We have been studying the working environment in mechanical industry. The goal of this project is to make communication possible between the workers at all levels of an organization in planning changes and has so far been very successful. The use of this technique is only limited by our imagination and funding. Some examples to be tested in the near future are "Escape at a fire", "Animation of a Dairy", "Traffic situations in a parking lot-, "CAD-working place" and others. One of the difficulties in interactive planning with users has been to come close enough to their reality. With animated images it is possible to visualize what is going to happen and what it is going to look like in a more understandable way. In education this must be a challenging possibility. Changes and processes are some of the most difficult subjects to describe and explain! The software used is a handful of individual programs which, thanks to the graphics standards of the Macintosh, can exchange data with each other.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	45e6
authors	Agger, Kristian and Lentz, Uffe (Eds.)
year	1989
title	CAAD: Education - Research and Practice [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1989
source	eCAADe Conference Proceedings / ISBN 87-982875-2-4 / Aarhus (Denmark) 21-23 September 1989
summary	In the announcement of the sixth eCAADe Conference we stated that It is held at a time where CAAD is moving into practice very fast, with heavy influence on research and education. We stated that research is directed towards the early design phases, and that education is facing the problem of mass education. In that situation much benefit can be obtained from collaboration with practice. We decided to give the conference the title “CAAD: Education - Research and Practice” to state the importance of practice as a test bench. The conference papers cover education and research in depth in many important areas and give a good overview, whereas the practical theme is more or less missing, indicating, that experience here is still modest. At the lecture material market and the exhibition the situation is opposite and shows state of art in practical use.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: