Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 147

Reformat results as: short short into frame detailed detailed into frame

_id	4032
authors	Barron, Christopher L.
year	1989
title	3-D Modelling
source	architectural and Engineering Systems. April, 1989. [41] -56 unevenly numbered
summary	From screen to structure, more and more AEs are finding design solutions in the third dimension. The author reviews current 3-D modeling systems, what are the expectations of the users and the developers goals
keywords	architecture, practice, drafting, modeling, systems
series	CADline
last changed	2003/06/02 13:58

_id	778e
authors	Gann, D.
year	1994
title	Archaeological Site Reconstruction With AutoDesk's 3D Studio
source	CSA Newsletter Vol 7:3 Nov 1994
summary	3D Studio is an IBM-compatible computer modeling program that enables users to create three-dimensional renderings of a variety of objects. In its ability to import a wide variety of maps and other images, 3D Studio allows for the realistic rendering of models created within AutoCAD or other 3D CAD packages. Over the past year, the Homol'ovi research program has been utilizing this software to create near photo-realistic renderings of conjectural site models. My own interests in three-dimensional computer modeling developed out of work at the site of Homol'ovi IV, a 150-room pueblo site located near Winslow, Arizona. The site was situated upon a steep 30-meter bluff with a bedrock cap. Approximately 24 rooms were located on top of the bedrock cap, with another 125 rooms situated on the slope of the butte. During the 1989 field season five structures were excavated, while a separate crew worked clearing and mapping the tops of walls. Mapping was accomplished with a Topcon EDM/theodolite station, and a standard map was created from this process. (See Fig. 3.) While the map was sufficient to show the general layout of the site, I remained unsatisfied; a 2D plan view simply did not convey the vertical dimension of the pueblo. At this point the Homol'ovi Research Program purchased a copy of AutoCAD in order to begin exploring three-dimensional mapping and modeling.
series	other
last changed	2003/04/23 15:50

_id	6b83
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	1989
title	Towards a New Generation of Computer Assistants for Architectural Design: An Existing Scenario
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f9h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.3.1.8.3.10
summary	The context in which designers operate is becoming more and more complex, owing to the large number of codes, new materials, technologies and professional figures; new instruments are needed, therefore, to support and verify design activity. The results obtained in the first years of 'computer era' were barely sufficient. The hardware and software available today is capable of producing a new generation of CAD systems which can aid the designer in the process of conceiving and defining building objects. At the CAD Laboratory in the Department of Building and Environmental Control Techniques at the 'La Sapienza' University of Rome, research is being carried out with the aim of defining a new kind of Knowledge-based assistant for architectural design. To this purpose a partnership has been established whit a private firm called CARTESIANA, whose partners are software houses, designing and building associations.
keywords	Knowledge-Based Architectural Design
series	eCAADe
last changed	2022/06/07 07:50

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	a2b7
authors	Jalali, Yousef and Moore, Anne
year	1989
title	Design Development & 3-D Applications
source	Architectural and Engineering Systems
summary	September, 1989. vol. 5: pp. 29;32. In design, 3-D modeling is a pleasant but non-essential amenity. In building architecture, it is vital. CAD frees architects to do what they do best: to think about design and how to perfect it. 3-D models delight the client and expedite construction. Some implementation in the author's office is discussed
keywords	practice, drafting, systems, modeling, CAD, architecture
series	CADline
last changed	2003/06/02 13:58

_id	a920
authors	Kulcke, Richard
year	1989
title	CAAD in the Architectural Education of the Fachhochschulen in the Federal Republic of Germany
doi	https://doi.org/10.52842/conf.ecaade.1989.x.w7a
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.3.1
summary	For over 10 years the author has been a teacher in the field of "computer application in architecture" at the Fachhochschule. Since 1985 he regularly has been taking part in the conferences of A.I.I.D.A. (Arbeitskreis INFORMATIK IN DER ARCHlTEKTENAUSBILDUNG). All the faculties of architecture at the Fachhochschulen (about 10) can send their representatives of CAAD to the conferences. A.I.I.D.A. has been having 2 conferences a year since 1985. At the last conference in Wiesbaden a paper with statements of A.I.I.D.A. for the further education in CAAD was finished. The author presents and explains this paper. On the other hand he shows the actual education program of CAAD of his faculty. The education in CAAD started in 1972 with basic information without practical elements. Now the practical work with the workstation is talking most of the time . The computer application is available for subjects like Building Economics, Building and Structure Design and others. With his assistant the author developed programs of the field of Building Economics. In 1986 he started introduce CAD with AutoCAD in the education program. Now also other colleagues start to integrate CAAD into their subjects.
series	eCAADe
last changed	2022/06/07 07:50

_id	effd
authors	Morozumi, M., Nakamura, H. and Kijima, Y.
year	1990
title	A Primitive-Instancing Interactive 3-D Modeling System for Spatial Design Studies
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 457-468
summary	The authors have developed a basic, interactive, primitive-instancing 3-D modeling system (CAADF), which is based on a high-speed 3-D color graphic workstation, and have tested its potential ability to support spatial design studies in an architectural design studio. After- a review of work performed by a student with the system, this paper concludes that this system provides an attractive environment for spatial design studies which conventional CAD systems have not achieved. The interactive process of 3-D modeling in perspective or isometric view images and the dynamic viewing utility are the most successful features of the system. In contrast to those advantages, the resolution of color graphic display is a limitation of the system. The authors conclude that if sufficiently many appropriate 3-D geometric primitives are supported by a CAD system, a primitive instancing method can significantly reduce the work entailed in object modeling.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	7812
authors	Straber, W. and Seidel, H.-P. (eds.)
year	1989
title	Theory and Practice of Geometric Modeling
source	Springer-Verlag
summary	This book originates from the lectures given at the international conference "Theory and Practice of Geometric Modeling", Blaubeuren, FRG, October 3-7, 1988, that brought together leading experts from universities, system developers, and system users, to discuss new concepts and future trends in geometric modeling. The book covers a variety of topics on an advanced level and is organized as follows. Part A contains new algorithms and techniques for modeling objects that are bounded by free form surfaces. Part B focuses on surface/surface intersections, new types of blending surfaces and speed ups for ray tracing. Part C contains some new geometric tools. Part D discusses different representation schemes in solid modeling, conversions between these different schemes, and some applications. Part E covers some issues of product modeling, automatic tolerancing, high level specification of solid models (constraints, features) and the need for better user interfaces.
series	other
last changed	2003/04/23 15:14

_id	abdb
authors	Wood, D.J., Brown, A.G.P. and Brown, G.Z.
year	1989
title	A Sunlight Design Tool
doi	https://doi.org/10.52842/conf.ecaade.1989.x.q6i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.3.1-9.3.7
summary	Computer-based techniques for Environmental design tend to be analytical. They are aimed at the engineer who takes a previously designed building and then analyses the environmental performance of the building so as to be able to give performance requirements for servicing plant. Thus the building has been designed by an architect using experience and some broad background knowledge of environmental performance, but it is usually not until the analysis stage is reached that the building's environmental performance is accurately assessed. A sunlight design program (application) has been written to address this problem. This program is aimed at the designer and should allow them to assess quickly the sunlight characteristics of' their building. The intention has been to produce a tool which is easy to understand and use: a tool which is interactive and in which data can be changed easily. Thus the tool can be used: to check the effect of design changes on sunlight performance. The tool is meant to the both an aid to design itself and to the understanding of the environmental performance of buildings. This paper describes the application and the use of it by architectural students. We describe the application, assess it and evaluate its educational value by comparing students' estimations of sunlight performance in their own buildings with performance predicted by it. We look at how students interact with the program to modify their design in response to this interaction and report on their evaluation of the application during a controlled exercise.
keywords	Design Tools, Sunlight, Design Education
series	eCAADe
email
last changed	2022/06/07 07:50

_id	841d
authors	Gilleard, John D.
year	1989
title	Integrating Microcomputer CADr and Bill of Material Routines Using AutoCad
doi	https://doi.org/10.52842/conf.ecaade.1989.x.r8o
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.2.1-9.2.10
summary	Through the integration of microcomputer-aided draughting (CADr), and in particular with AutoCAD, the industries most extensively used CADr program, and automated routines for the production of bills of materials, a dramatic incr-ease in productivity is possible in the architectural design domain. Working from a variety of material take off methods complete cost estimates may be achieved through the manipulation of drawing data and exchanging the information with third-party estimating software. However, the area of study is currently at a formative stage of development and full integration, although technically feasible, is rarely attempted. Therefore, the paper comments on the development of 'in-house' routines using AutoCAD's data extraction features and AutoLISP; reviews current commercial systems of interfacing AutoCAD with bills of materials and automated specification routines; and, finally, discusses possible future advances in this major area of study.
keywords	AutoCAD, Bills-of-Materials, Integration
series	eCAADe
last changed	2022/06/07 07:50

_id	ab63
authors	Gross, Mark D.
year	1990
title	Relational Modeling: A Basis for Computer-Assisted Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 123-136
summary	Today's computer assisted design (CAD) systems automate traditional ways of working with tracing paper and pencil, but they cannot represent the rules and relationships of a design. As hardware becomes faster and memory less expensive, more sophisticated fundamental software technologies will be adopted. This shift in the basis of CAD will provide powerful capabilities and offer new ways to think about designing. Recently parametric design, a technique for describing a large class of designs with a small description in code, has become a focus of attention in architectural computing. In parametric CAD systems, design features are identified and keyed to a number of input variables. Changes in the input values result in variations of the basic design. Based on conventional software technologies, parametric design has been successfully applied in many design domains including architecture and is supported by several commercial CAD packages. A weakness of parametric techniques is the need to predetermine which properties are input parameters to be varied and which are to be derived. Relational modeling is a simple and powerful extension of parametric design that overcomes this weakness. By viewing relations as reversible rather than one-way, any set of properties can be chosen as input parameters. For example, a relational model that calculates the shadow length of a given building can also be used to calculate the building height given a desired shadow length. In exercising a relational model the designer is not limited to a pre-selected set of input variables but can explore and experiment freely with changes in all parts of the model. Co is a relational modeling environment under development on the Macintosh-II computer, and Co-Draw, a prototype CAD program based on Co. Co's relationaI engine and object-oriented database provide a powerful basis for modeling design relations. Co-Draw's interactive graphics offer a flexible medium for design exploration. Co provides tools for viewing and editing design models in various representations, including spreadsheet cards, tree and graph structures, as well as plan and elevation graphics. Co's concepts and architecture are described and the implications for design education are discussed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	2a8b
authors	Purcell, Patrick and Applebaum Dan
year	1990
title	Light Table: An Interface To Visual Information Systems
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 229-238
summary	A primary aim of the Light Table project was to see if a combination of the optical laser disc, local area networks, and interactive videographic workstation technology could bring a major visual collection, (such as the Rotch Visual Collections of the Massachusetts Institute of Technology), to a campuswide population of undergraduate users. VIS (Visual Information System) is the name being given to the new genre of information technology. Much research and development effort is currently being applied to areas where the image has a special significance, for example in architecture and planning, in graphic and fine arts, in biology, in medicine, and in photography. One particular advance in the technology of VIS has been the facility to access visual information across a distributed computer system via LAN (Local Area Networks) and video delivery systems, (such as campus TV cable). This advance allows users to retrieve images from both local and remote sources, dispatching the image search through the LAN, and receiving the images back at their workstation via dedicated channels on the campus TV cable. Light Table is the title of a system that acts as a computer-based interactive videographic interface to a variety of visual information systems described in the body of this paper. It takes its name from the traditional, back- lit, translucent light table that lecturers use to assemble and view collections of slides for talks and seminars. The component of Light Table which is being reported in greatest detail here, a software outcome called Galatea, is a versatile and robust system capable of controlling video devices in a networked environment.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	cf15
authors	Penttilä, Hannu
year	1989
title	Computer Aided Building Modeling
doi	https://doi.org/10.52842/conf.ecaade.1989.x.d2h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 3.2.1-3.2.11
summary	The subject of computer-aided building modeling is often discussed in various contexts, sometimes without clear explanation of what is modelled. Usually modeling refers to 3-dimensional geometric modeling, but nowadays also conceptual modeling and mathematical simulation aspects are more and more evident. Building modeling should though be considered more widely than just plain geometric visualization. This paper establishes one common framework for discussion about different building modeling viewpoints arranging discipline viewpoints, approach methods, existing standards and application tools within one context. Although several viewpoints are declared conceptual building modeling is regarded the main emphasis of this paper, since it definitely will be one of the key issues in developing methods and tools for computer integrated construction (CIC) in the future.
keywords	Building Modeling, Building Information and Data, Product Modeling, Conceptual Modeling, Geometric Modeling, Standards, Application Programs
series	eCAADe
email
more	http://www.tut.fi/~penttila/index.html
last changed	2022/06/07 07:50

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	a8b7
authors	De Grassi, Mario and Di Manzo, Mauro
year	1989
title	The Design of Buildings as Changes of Known Solutions: A Model for “Reasoner B” ; Reasoner B" in the Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.u3h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.3.1-7.3.9
summary	The paper presents a study aimed at the modelization of a design operation of perturbation of an architectural framework in order to comply with a series of given design specifications. A formalized representation of the building object is assumed, Artificial Intelligence techniques are adopted to work on it. It is assumed that the computer carries out deformations starting from one of these structures in order to attain to a solution consistent with project specifications. A description of the structures employed for the representation of the building body (matroids) is firstly proposed. A planning theme is then assumed, as an example, whose main feature is to maintain the outer perimeter of a dwelling, to change its internal distribution in such a way as to resemble as closely as possible to the original and yet meaningfully alter its typology.
series	eCAADe
type	normal paper
last changed	2022/06/07 07:50

_id	25de
authors	Ervamaa, Pekka
year	1993
title	Integrated Visualization
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 157-160
summary	The Video and Multimedia studio at VTT, Technical Research Centre of Finland, started with endoscopy photography of scale models. Video recordings has been made since 1985 and computer graphic since 1989. New visualization methods and techniques has been taken into use as a part of research projects, but mainly we have been working with clients commissions only. Theoretical background for the visualizations is strong. Research professor Hilkka Lehtonen has published several papers concerning the theory of visualization in urban planning. This studio is the only professional level video unit at Technical Research Centre, which is a large polytechnic research unit. We produce video tapes for many other research units. All kind of integrated methods of visualization are useful in these video productions, too.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	e378
authors	Gerken, H.
year	1989
title	Performance and Problems of Software Surveys
doi	https://doi.org/10.52842/conf.ecaade.1989.x.h3l
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 6.3.1-6.3.4
summary	The general purpose of surveys of products and services is to give a first information on a special market segment to the potential buyer. Therefore such surveys have an important transmitting and at the same time objectifying task. There is a lot of software surveys in West Germany and German-speaking neighboring countries, for instance the well known Nomina Reports. Besides these general, many application fields and computer classes comprising surveys there are special ones which are sometimes part of a larger publication. In the field of architecture there are two special software surveys available: the survey of the Swiss engineers and architects association (SIA) and the survey of the Institute of Architecture and Planning Theory (IAP) of the University of Hannover.
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: