Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 194

Reformat results as: short short into frame detailed detailed into frame

_id	maver_065
id	maver_065
authors	Clarke, J. and Maver, T.W.
year	1989
title	Advanced Design Tools for Energy Conscious Design
source	Paper to Royal Society
summary	This paper is concerned with building energy simulation and the prospects for the delivery of a new generation of simulation based, valid and easy to use design tools to the building construction industry. The issues relating to design tools development and use are discussed and the present state-of-the-art is described. Some medium to long term developments are then identified, including an intelligent front end and the notion of an advanced machine environment for the construction and maintenance of future models concerned with building energy and environment. The mechanisms for technology transfer are identified and experiences recounted of the first two years operation of an innovatory energy design advisory service. The paper finishes with a look to the future of the information technologies in building design.
series	other
email
last changed	2003/09/03 15:01

_id	acadia06_079
id	acadia06_079
authors	Kumar, Shilpi
year	2006
title	Architecture and Industrial Design A Convergent Process for Design
doi	https://doi.org/10.52842/conf.acadia.2006.079
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 79-94
summary	The use of technology has grown with the way design professions have evolved over time. Changing needs, desires of comfort, and perceptions of the consumers have led to a distinct improvement in the design of both product and architecture. The use of the digital media and emerging technologies has brought a dramatic change to the design process allowing us to view, feel, and mould a virtual object at every stage of design, development, and engineering. Change is often quick and easy since a virtual product does not inherently carry the biases of its physical counterpart. In order to communicate ideas across the team, digital processes are also used to bring together opinions, experiences, and perspectives. These methods encourage decision making based on information rather than prejudice or instinct. Thus, digital exchanges (technology) impact firm strategies at three levels: product, process, and administrative or support activities (Adler 1989).Digital tools for design exchange in Industrial Design (ID) began much earlier than many other professions. The profession of Architecture is also slowly moving to a similar model with digital exchange finding increasing prevalence in drawing, modeling, performance simulation, design collaboration, construction management, and building fabrication. The biggest problem is the disintegrated use of technology in the architectural profession without a strategy toward streamlining the design process from conception to fabrication. In this paper we investigate how the use of technology has evolved in the professions of Industrial Design and Architecture comparatively in their product, process, and support activities. Further, we will present a set of guidelines that will help architects in the convergence of design process, helping in a more efficient work flow with a strategic use of digital technology.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	c903
authors	Mark, Earl
year	1990
title	Case Studies in Moviemaking and Computer-Aided Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 393-412
summary	A movie which is developed from site location video, sync sound, and computer graphics animation can provide a highly convincing simulation of reality. A movie that conveys a sense of the space, materials and juxtaposition of objects of a proposed architectural design provides a special kind of realism, where the representation may be of a proposed building that exists only within the mind of an architect. For an experienced architect, however, the movie may not provide a good surrogate experience for what it feels like to actually be within the architectural space. In these case studies, a few projects that combine moviemaking and computer-aided design technologies are examined. These projects were completed using a combination of resources at the MIT School of Architecture and Planning and the Harvard Graduate School of Design. The integrated use of these media is presented as conceptualized with the Electronic Design Studio, a research project that has been supported over the past five years by Project Athena at MIT. The impact of movies and computer-aided design on the perception of architectural space is also reported- based on a pilot study of twenty architectural students.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	cf15
authors	Penttilä, Hannu
year	1989
title	Computer Aided Building Modeling
doi	https://doi.org/10.52842/conf.ecaade.1989.x.d2h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 3.2.1-3.2.11
summary	The subject of computer-aided building modeling is often discussed in various contexts, sometimes without clear explanation of what is modelled. Usually modeling refers to 3-dimensional geometric modeling, but nowadays also conceptual modeling and mathematical simulation aspects are more and more evident. Building modeling should though be considered more widely than just plain geometric visualization. This paper establishes one common framework for discussion about different building modeling viewpoints arranging discipline viewpoints, approach methods, existing standards and application tools within one context. Although several viewpoints are declared conceptual building modeling is regarded the main emphasis of this paper, since it definitely will be one of the key issues in developing methods and tools for computer integrated construction (CIC) in the future.
keywords	Building Modeling, Building Information and Data, Product Modeling, Conceptual Modeling, Geometric Modeling, Standards, Application Programs
series	eCAADe
email
more	http://www.tut.fi/~penttila/index.html
last changed	2022/06/07 07:50

_id	2db4
authors	Schmitt, Gerhard
year	1992
title	Design for Performance
source	New York: John Wiley & Sons, 1992. pp. 83-100 : ill. includes bibliography Design for performance describes a generative approach toward fulfilling qualitative and quantitative design requirements based on specification and existing cases. The term design applies to the architectural domain: the term performance includes the aesthetic, quantitative, and qualitative behavior of an artifact. In achieving architectural quality while adhering to measurable criteria, design for performance has representational, computational, and practical advantages over traditional methods, in particular over post-facto single- and multicriteria analysis and evaluation. In this paper a proposal for a working model and a partial implementation of this model are described. architecture / evaluation / performance / synthesis / design / representation / prediction / integration. Ô h)000*°° ÔŒ21. Schneekloth, Lynda H., Rajendra K. Jain and Gary E. Day. 'Wind Study of Pedestrian Environments.' February, 1989. 30, [2] p. : ill. includes bibliography and index.
summary	This report summarizes Part 1 of the research on wind conditions affecting pedestrian environments for the State University of New York at Buffalo. Part 1 reports on existing conditions in the main part of the North Campus in Amherst. Procedures and methods are outlined, the profile of the current situation reported, and a special study on the proposed Natural Science and Math Building are included
keywords	architecture, research, evaluation, analysis, simulation, hardware
series	CADline
last changed	1999/02/12 15:09

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	841d
authors	Gilleard, John D.
year	1989
title	Integrating Microcomputer CADr and Bill of Material Routines Using AutoCad
doi	https://doi.org/10.52842/conf.ecaade.1989.x.r8o
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.2.1-9.2.10
summary	Through the integration of microcomputer-aided draughting (CADr), and in particular with AutoCAD, the industries most extensively used CADr program, and automated routines for the production of bills of materials, a dramatic incr-ease in productivity is possible in the architectural design domain. Working from a variety of material take off methods complete cost estimates may be achieved through the manipulation of drawing data and exchanging the information with third-party estimating software. However, the area of study is currently at a formative stage of development and full integration, although technically feasible, is rarely attempted. Therefore, the paper comments on the development of 'in-house' routines using AutoCAD's data extraction features and AutoLISP; reviews current commercial systems of interfacing AutoCAD with bills of materials and automated specification routines; and, finally, discusses possible future advances in this major area of study.
keywords	AutoCAD, Bills-of-Materials, Integration
series	eCAADe
last changed	2022/06/07 07:50

_id	afdd
authors	Gupta, Anurag P. and Siewiorek, Daniel P.
year	1989
title	Hierarchical Design Synthesis : The M1 System
source	Pittsburgh: Engineering Design Research Center, September, 1989. 22 p. : ill. tables. includes bibliography
summary	Rapid advances in semiconductor technology are motivating the development of computer-aided design tools to assist human designers at the higher levels of the design process. In particular, there is a need for tools that aid system-level design synthesis - the process of producing a detailed artifact satisfying high level specifications given a set of components. A knowledge-based approach that uses a hierarchical design synthesis methodology is described. M1 is a knowledge-based system that implements the approach for the domain of single board computer design. A set of experiments which indicate M1's capabilities and the effectiveness of the approach in organizing and utilizing knowledge are presented
keywords	knowledge base, systems, design, expert systems, electrical engineering, integrated circuits, synthesis
series	CADline
last changed	2003/06/02 13:58

_id	0e93
authors	Af Klercker, Jonas
year	1989
title	Interactive Animation on the Macintosh II
doi	https://doi.org/10.52842/conf.ecaade.1989.x.a0t
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.5.1-9.5.6
summary	The efficiency of images in communication between humans has so far been used almost exclusively by TV and other mass medias. The costs have been too great to encourage the use of images in the financially restricted everyday practice of architecture. With a range of application programs for the Apple Macintosh II the vision has come close to reality. It is now possible to create guided walks with the chance to choose different routes and views in a model of buildings and surroundings in 256 colour graphics. The makers of these programs may not have foreseen this use for their products and that is why it takes quite a lot of effort to make all the necessary images. With some supplementary routines however, this will be made much easier. Animation can also be used to visualize different processes inside a building. We have been studying the working environment in mechanical industry. The goal of this project is to make communication possible between the workers at all levels of an organization in planning changes and has so far been very successful. The use of this technique is only limited by our imagination and funding. Some examples to be tested in the near future are "Escape at a fire", "Animation of a Dairy", "Traffic situations in a parking lot-, "CAD-working place" and others. One of the difficulties in interactive planning with users has been to come close enough to their reality. With animated images it is possible to visualize what is going to happen and what it is going to look like in a more understandable way. In education this must be a challenging possibility. Changes and processes are some of the most difficult subjects to describe and explain! The software used is a handful of individual programs which, thanks to the graphics standards of the Macintosh, can exchange data with each other.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	e19d
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1989
title	Capturing Designer Expertise : The CGEN System
source	18 p. : ill Pittsburgh, PA: Engineering Design Research Center, CMU, August, 1989. EDRC 18-08-89. includes bibliography.
summary	Knowledge-based systems are becoming pervasive in the computer-aided design area. For these systems to achieve satisfactory levels of performance large amounts of knowledge are necessary. However, the acquisition of knowledge is a difficult and tedious task. Automated knowledge-acquisition tools (AKAT) provide capabilities for quickly building and maintaining knowledge-bases. This paper describes the CGEN AKAT, which allows hardware designers, unfamiliar with artificial intelligence programming techniques, to deposit their expertise into a synthesis tool's knowledge-base. A set of experiments which tested CGEN's capabilities are presented. The experiments show that with CGEN hardware designers can produce high quality knowledge-bases
keywords	CAD, automation, knowledge acquisition, tools, AI, programming, knowledge base, systems, integrated circuits, hardware
series	CADline
last changed	2003/06/02 10:24

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	6b83
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	1989
title	Towards a New Generation of Computer Assistants for Architectural Design: An Existing Scenario
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f9h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.3.1.8.3.10
summary	The context in which designers operate is becoming more and more complex, owing to the large number of codes, new materials, technologies and professional figures; new instruments are needed, therefore, to support and verify design activity. The results obtained in the first years of 'computer era' were barely sufficient. The hardware and software available today is capable of producing a new generation of CAD systems which can aid the designer in the process of conceiving and defining building objects. At the CAD Laboratory in the Department of Building and Environmental Control Techniques at the 'La Sapienza' University of Rome, research is being carried out with the aim of defining a new kind of Knowledge-based assistant for architectural design. To this purpose a partnership has been established whit a private firm called CARTESIANA, whose partners are software houses, designing and building associations.
keywords	Knowledge-Based Architectural Design
series	eCAADe
last changed	2022/06/07 07:50

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2b8f
authors	Colajanni, Benedetto and De Grassi, Mario
year	1989
title	Inferential Mechanisms to be Employed in CAAD: The Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.c7m
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.1.1-7.1.9
summary	The paper presents an approach to the problems of architectural design aided by Artificial Intelligence techniques that can solve the difficulties related to combinatorial explosion, often encountered in the past. Three expert systems, dubbed "reasoners", capable of some elementary design work and a hypothesis for their interaction have been developed. Reasoner A has an "analogical" view of space. A notion of conflict, managed by means of fuzzy logic, has been introduced. It corresponds, in an intuitive and straightforward fashion, to the common notion of conflict or contradiction in real space as a consequence of improper overlapping of actual physical objects or of their functional pertinence. Reasoner B works on formalized models of building objects. It designs new patterns from given patterns taken as defaults. Reasoner C picks up from an archive of patterns the one which best suits a list of given goals. Design is the result of interaction between the three reasoners. Finally, the proposed schema raises questions about formal structures ("images") and about the nature of culturally-linked options ("memory") on which some preliminary considerations are made. Prototypes of the reasoners are operating at the Instituto di Edilizia of the University of Ancona, Italy.
series	eCAADe
last changed	2022/06/07 07:50

_id	e3b0
authors	Cottone, Antonio and Buscemi, Maria Rosa
year	1989
title	And if We Take a Bacxward Step...
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f6i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.15.1.9.15.8
summary	In these years the researches on the computer science applied to the building have had a considerable development. The applications concern the whole design process, from the programming to the design and from the execution control to the programmed maintenance with a great deal of problems solved using expert systems. It doesn't seem that the same care of men and means has been dedicated to the architectural design theory, to its deep roots which motivate it and to its peculiarity in comparison with other fields in which now the design, with the aid of the computer, is the only one possible. The designer of architectural objects has been always helped by design assistants: it is enough to think that the sixteenth century treatises are a group of rules, descriptions, solutions to design problems and that they represent the "knowledge" of the age. As the knowledge increased those treatises amplified to the encyclopaedic dimensions of the nineteenth-century handbooks and of those of the first years of this century, while new professional figures rose, the teaching developed and the building art became more and more complex.
series	eCAADe
last changed	2022/06/07 07:50

_id	a8b7
authors	De Grassi, Mario and Di Manzo, Mauro
year	1989
title	The Design of Buildings as Changes of Known Solutions: A Model for “Reasoner B” ; Reasoner B" in the Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.u3h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.3.1-7.3.9
summary	The paper presents a study aimed at the modelization of a design operation of perturbation of an architectural framework in order to comply with a series of given design specifications. A formalized representation of the building object is assumed, Artificial Intelligence techniques are adopted to work on it. It is assumed that the computer carries out deformations starting from one of these structures in order to attain to a solution consistent with project specifications. A description of the structures employed for the representation of the building body (matroids) is firstly proposed. A planning theme is then assumed, as an example, whose main feature is to maintain the outer perimeter of a dwelling, to change its internal distribution in such a way as to resemble as closely as possible to the original and yet meaningfully alter its typology.
series	eCAADe
type	normal paper
last changed	2022/06/07 07:50

_id	09a5
authors	Eastman, Charles M.
year	1989
title	Building Modeling in Architectural Design
source	[8] p. : ill. Design & Computation . Los Angeles: Graduate School of Architecture and Urban Planning, UCLA, 1989? includes bibliography
summary	This paper reviews building modeling from the perspective of U.S. architectural practice. During the previous twenty years of computer-aided architectural design, the underlying paradigm has mimicked a paper-based technology. The future of design, however, is proposed to be in building modeling. A review of building modeling is provided and some prospects for architectural design, based on its concepts, are proposed
keywords	CAD, building, modeling, architecture, design
series	CADline
email
last changed	2003/05/17 10:15

_id	0642
authors	Eastman, Charles M.
year	1989
title	Why Are We Here and Where We are Going: The Evolution of CAD
doi	https://doi.org/10.52842/conf.acadia.1989.009
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 9-26
summary	This paper reviews architectural CAD in terms of its current use, development and status within the U.S. The characteristics of a new generation of architectural CAD system, called building modeling, are outlined. Criteria are developed for the evaluation of CAD systems that support building modeling. Some of the opportunities for universities growing out of building modeling are reviewed, including pedagogical implications and opportunities for research.
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: