Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 205

Reformat results as: short short into frame detailed detailed into frame

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	e19d
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1989
title	Capturing Designer Expertise : The CGEN System
source	18 p. : ill Pittsburgh, PA: Engineering Design Research Center, CMU, August, 1989. EDRC 18-08-89. includes bibliography.
summary	Knowledge-based systems are becoming pervasive in the computer-aided design area. For these systems to achieve satisfactory levels of performance large amounts of knowledge are necessary. However, the acquisition of knowledge is a difficult and tedious task. Automated knowledge-acquisition tools (AKAT) provide capabilities for quickly building and maintaining knowledge-bases. This paper describes the CGEN AKAT, which allows hardware designers, unfamiliar with artificial intelligence programming techniques, to deposit their expertise into a synthesis tool's knowledge-base. A set of experiments which tested CGEN's capabilities are presented. The experiments show that with CGEN hardware designers can produce high quality knowledge-bases
keywords	CAD, automation, knowledge acquisition, tools, AI, programming, knowledge base, systems, integrated circuits, hardware
series	CADline
last changed	2003/06/02 10:24

_id	6b83
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	1989
title	Towards a New Generation of Computer Assistants for Architectural Design: An Existing Scenario
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.3.1.8.3.10
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f9h
summary	The context in which designers operate is becoming more and more complex, owing to the large number of codes, new materials, technologies and professional figures; new instruments are needed, therefore, to support and verify design activity. The results obtained in the first years of 'computer era' were barely sufficient. The hardware and software available today is capable of producing a new generation of CAD systems which can aid the designer in the process of conceiving and defining building objects. At the CAD Laboratory in the Department of Building and Environmental Control Techniques at the 'La Sapienza' University of Rome, research is being carried out with the aim of defining a new kind of Knowledge-based assistant for architectural design. To this purpose a partnership has been established whit a private firm called CARTESIANA, whose partners are software houses, designing and building associations.
keywords	Knowledge-Based Architectural Design
series	eCAADe
last changed	2022/06/07 07:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	88cb
authors	Gero, John S. and Oksala, Tarkko (editors)
year	1988
title	Knowledge-Based Systems in Architecture
source	TIPS'88 - Knowledge Based Design in Architecture, Acta Polytechnica Scandinavica (1988 : Helsinki, Finland). 143 p. 1989
summary	The technology of knowledge-based systems can be found in texts on artificial intelligence. There is very little published so far on knowledge-based systems in architecture. To this end an international conference -- TIPS' 88: Knowledge-Based Design in Architecture -- was organized for August 1988 in Finland. Thirteen papers from that conference have been selected and edited for this monograph. They are grouped under five parts: Introduction; Schemas and Models; Processes and Knowledge; Modeling Buildings; and Creativity and Knowledge-Based Systems
keywords	knowledge base, architecture, representation, expert systems,building, creativity
series	CADline
email
last changed	2003/06/02 13:58

_id	ab63
authors	Gross, Mark D.
year	1990
title	Relational Modeling: A Basis for Computer-Assisted Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 123-136
summary	Today's computer assisted design (CAD) systems automate traditional ways of working with tracing paper and pencil, but they cannot represent the rules and relationships of a design. As hardware becomes faster and memory less expensive, more sophisticated fundamental software technologies will be adopted. This shift in the basis of CAD will provide powerful capabilities and offer new ways to think about designing. Recently parametric design, a technique for describing a large class of designs with a small description in code, has become a focus of attention in architectural computing. In parametric CAD systems, design features are identified and keyed to a number of input variables. Changes in the input values result in variations of the basic design. Based on conventional software technologies, parametric design has been successfully applied in many design domains including architecture and is supported by several commercial CAD packages. A weakness of parametric techniques is the need to predetermine which properties are input parameters to be varied and which are to be derived. Relational modeling is a simple and powerful extension of parametric design that overcomes this weakness. By viewing relations as reversible rather than one-way, any set of properties can be chosen as input parameters. For example, a relational model that calculates the shadow length of a given building can also be used to calculate the building height given a desired shadow length. In exercising a relational model the designer is not limited to a pre-selected set of input variables but can explore and experiment freely with changes in all parts of the model. Co is a relational modeling environment under development on the Macintosh-II computer, and Co-Draw, a prototype CAD program based on Co. Co's relationaI engine and object-oriented database provide a powerful basis for modeling design relations. Co-Draw's interactive graphics offer a flexible medium for design exploration. Co provides tools for viewing and editing design models in various representations, including spreadsheet cards, tree and graph structures, as well as plan and elevation graphics. Co's concepts and architecture are described and the implications for design education are discussed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c903
authors	Mark, Earl
year	1990
title	Case Studies in Moviemaking and Computer-Aided Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 393-412
summary	A movie which is developed from site location video, sync sound, and computer graphics animation can provide a highly convincing simulation of reality. A movie that conveys a sense of the space, materials and juxtaposition of objects of a proposed architectural design provides a special kind of realism, where the representation may be of a proposed building that exists only within the mind of an architect. For an experienced architect, however, the movie may not provide a good surrogate experience for what it feels like to actually be within the architectural space. In these case studies, a few projects that combine moviemaking and computer-aided design technologies are examined. These projects were completed using a combination of resources at the MIT School of Architecture and Planning and the Harvard Graduate School of Design. The integrated use of these media is presented as conceptualized with the Electronic Design Studio, a research project that has been supported over the past five years by Project Athena at MIT. The impact of movies and computer-aided design on the perception of architectural space is also reported- based on a pilot study of twenty architectural students.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8a0c
authors	Tan, Milton
year	1990
title	Saying What It Is by What It Is Like - Describing Shapes Using Line Relationships
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 201-213
summary	Shapes - taken as well-defined collections of lines - are fundamental building blocks in architectural drawings. From doodles to shop drawings, shapes are used to denote ideas and represent elements of design, many of which ultimately translate into actual objects. But because designs evolve, the shapes representing a design are seldom static - instead, they are perpetually open to transformations. And since transformations involve relationships, conventional methods of describing shapes as sets of discrete endpoints may not provide an appropriate foundation for schematic design. This paper begins with a review of the perception of shapes and its significance in design. In particular, it argues that juxtapositions and inter-relationships of shapes are important seedbeds for creative development of designs. It is clear that conventional representation of shapes as sets of discrete lines does not cope with these -emergent" subshapes; the most basic of which arise out of intersecting and colinear lines. Attempts to redress this by using ‘reduction rules’ based on traditional point-and-line data structures are encumbered by computational problems of precision and shape specification. Basically, this means that some ‘close’ cases of sub-shapes may escape detection and their specifications are difficult to use in substitution operations. The paper presents the findings of a computer project - Emergence II - which explored a 'relational' description of shapes based on the concept of construction lines. It builds on the notion that architectural shapes are constructed in a graphic context and that, at a basic compositional level, the context can be set by construction lines. Accordingly, the interface enables the delineation of line segments with reference to pre-established construction lines. This results in a simple data structure where the knowledge of shapes is centralized in a lookup table of all its construction lines rather than dispersed in the specifications of line segments. Taking this approach, the prototype software shows the ease and efficiency of applying ‘reduction rules’ for intersection and colinear conditions, and for finding emergent sub-shapes by simply tracking the construction lines delimiting the ends of line segments.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	268e
authors	Christiansson, Per
year	1990
title	Integration of Knowledge Based Systems and Media
source	BYGGA MED IT. Informatiosteknologi i byggprocess. November, 1990. 4 p. : ill. includes bibliography The borders between different representations and their implementation in the computer systems are not sharp. It is possible now to create models which bring about a clearer and more obvious connection between the application and the computer stored models. knowledge base / systems / media / modeling / representation / integration. 32. Christiansson, Per. 'The KBS-MEDIA Project.' MacWorld Expo Asia '89. 1989. 2 p. : ill.
summary	A short description of the KBS-MEDIA, knowledge based systems - media project advanced software
keywords	knowledge base, systems, media
series	CADline
last changed	1999/02/12 15:07

_id	0f73
authors	Ervin, Stephen M.
year	1990
title	Designing with Diagrams: A Role for Computing in Design Education and Exploration
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 107-122
summary	Environmental designers, design educators and design students using computers are a constituency with a set of requirements for database structure and flexibility, for knowledge representation and inference mechanisms, and for both graphical and non-graphical operations, that are now articulatable and to-date largely unmet. This is especially so in the area called 'preliminary' or 'schematic' design, where our requirements are related to, but different from, those of our colleagues in mechanical and electrical engineering, whose needs have dominated the notable developments in this area. One manifestation of these needs is in the peculiar form of graphics called diagrams , and the ways in which environmental designers (architects, landscape architects., urban designers) use them. Our diagrams are both similar to and different from structural, circuit, or logical diagrams in important ways. These similarities and differences yield basic insights into designing and design knowledge, and provide guidance for some necessary steps in the development of the next generation of CAD systems. Diagrams as a form of knowledge representation have received little scrutiny in the literature of graphic representation and computer graphics. In the following sections I present an overview of the theoretical basis for distinguishing and using diagrams; examine some of the computational requirements for a system of computer-aided diagramming; describe a prototype implementation called CBD (Constraint Based Diagrammer) and illustrate one example of its use; and speculate on the implications and potential applications of these ideas in computer-aided design education.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	0565
authors	Oxman, Robert and Oxman, Rivka
year	1990
title	The Computability of Architectural Knowledge
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 171-185
summary	In an important contribution to the theoretical foundation of design computing, Mitchell noted "an increasingly urgent need to establish a demonstrably sound, comprehensive, rigorously formalized theoretical foundation upon which to base practical software development efforts" (Mitchell, 1986). In this paper we propose such a theoretical framework. A basic assumption of this work is that the advancement of design computing is dependent upon the emergence of a rigorous formulation of knowledge in design. We present a model of knowledge in architectural design which suggests a promising conceptual basis for dealing with knowledge in computer-aided design systems. We require models which can represent the formal knowledge and manipulative operations of the designer in all of their complexity-that is formal models rather than just geometric models. Shape Grammars (Stiny,1980) represent an example of such models, and constitute a relatively high level of design knowledge as compared to, for example, use of symmetry operations to generate simple formal configurations. Building upon an understanding of the classes of design knowledge as the conceptual basis for formal modeling systems may contribute a new realization of the potential of the medium for design. This will require a comprehensive approach to the definition of architectural and design knowledge. We consider here the implications of a well-defined body of architectural and design knowledge for design education and the potential mutual interaction-in a knowledge-rich environment-of design learning and CAAD learning. The computational factors connected with the representation of design knowledge and its integration in design systems are among the key problems of CAAD. Mitchell's model of knowledge in design incorporates formal knowledge in a comprehensive, multi-level, hierarchical structure in which types of knowledge are correlated with computational concepts. In the main focus of this paper we present a structured, multi-level model of design knowledge which we discuss with respect to current architectural theoretical considerations. Finally, we analyze the computational and educational relevance of such models.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	2bb6
authors	Van Bakergem, Dave
year	1990
title	Image Collections in the Design Studio
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 261-271
summary	No matter what the medium, architects are constantly using images in all aspects of design thinking. Whether it is the perception of the environment, an image in the mind's eye, an abstract drawing or a photographic record, designers use images to conceive of, and manipulate their design ideas. Managing these image collections occurs at a variety of levels in the creative process and is dependent on the type of image that is called upon for reference. The most basic example would be the image collection residing in the mind's memory which is a result of the designer’s world experiences and the relative impressiveness of each experience. Clearly, personal memory plays a significant role in the use of imagery in design, but it is unreliable and can be abstracted in uncontrollable ways. The sketchbook and later photographic collections of the grand tour were the beginnings of efforts to manage and utilize image collections as an aid to drawing and thinking about design. Now the capacity to use electronic means of creating, altering, storing, and retrieving images will enable designers to effectively use large image collections in ways that have not been possible before. This paper describes current work at the School of Architecture at Washington University in a graduate design studio. The students use a powerful 3D modeling CAD system (HOKDraw) to design and present their studio projects. In addition, we are experimenting with an image storage and retrieval system which is directly linked to the CAD model through a relational database (INGRES). Access to the database and images is instantly available through the command language and graphic display. The CAD model in effect becomes a 3D menu to an extensive image database stored on an optical memory disc recorder. Several collections are available to the studio members: the library's slide collection which relates to the studio project, specific photographs and drawings of the project site, and personal image collections stored by individuals for their own reference. The commonly accessible images are basically background material and images collected by the students to document the site, urban context and building typology. The personal images collections are any images (drawings, photographs, published images, CAD images) created or collected by the students for purposes of informing their design thinking. This work relates to the use of precedents and typology in architecture as a point of departure as well as in development of design ideas.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	06fc
authors	Vanier, Dana J.
year	1990
title	Hypertext: A Computer Tool to Assist Building Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 283-300
summary	This paper shows how hypertext, an electronic information transfer medium, can assist accessing the large volumes of architectural and engineering technical information needed in decision-making phase of building design. A technical paper on architectural details serves as a model for demonstrating the capabilities of hypertext. This example consists mostly of graphics and illustrates how the hypertext medium could act as an information source for designers in the construction industry. The objectives of the paper are to illustrate the potential of hypertext to create, disseminate, and access technical information, and to identify an electronic format for construction industry technical publications. The paper identifies the capabilities of the medium, some advantages and disadvantages of hypertext, and the potential of the medium for construction information transfer. The author suggests that hypertext systems can assist technical information transfer in the construction industry.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	44b3
authors	Cajati, Claudio
year	1989
title	Towards A KB System / Image-Databases - Integrated Interface: A Tool For Architectural Education
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.9.1-9.9.7
doi	https://doi.org/10.52842/conf.ecaade.1989.x.e2p
summary	Focusing on the tasks of university architectural education, a special stress is first laid on the possibility of going beyond some limits of traditional CAAD. as coming out from the recent debate, and on the opportunities offered by knowledge based systems as metadesign supports in architectural domains. Particularly, with regard to image-databases, their importance for explaining and exemplifying the knowledge representation in KB Systems, and their integration via intelligent interface are discussed. At last, some possible uses of the whole as an educational tool in the daily university training are proposed.
keywords	Architectural Education, KB System, Image-database, Interface
series	eCAADe
email
last changed	2022/06/07 07:50

_id	035e
authors	Gero, John S.
year	1988
title	Prototypes : A Basis for Knowledge-based Design
source	Symposium on Knowledge Based Design in Architecture. 1988. pp. 3-8. Also published in Knowledge Based Systems in Architecture, Acta Polytechnica Scandinavica, Helsinki, edited by J. S. Gero and T. Oksala, 1989
summary	A new conceptual schema called a prototype for the representation of generalized design knowledge is proposed. It contains knowledge necessary for the commencement and the continuation of a design. This paper briefly presents the schema and describes its use in designing. Its use in categorizing design processes is presented
keywords	prototypes, representation, knowledge base, design
series	CADline
email
last changed	2003/06/02 13:58

_id	62d0
authors	Gero, John S.
year	1989
title	Routine and Non-routine Design : A Prototype- based Approach
source	Expert Systems in Engineering Applications International Conference Proceedings. 1989. China: Huazhong University of Science and Technology Press, pp. 369-371
summary	CADLINE has abstract only. A new conceptual schema called a prototype for the representation of generalized design knowledge is proposed. It contains knowledge necessary for the commencement and the continuation of a design. This paper briefly presents the schema and describes its use in designing. Its use in categorizing design processes is presented
keywords	design, prototypes, knowledge, representation
series	CADline
email
last changed	2003/06/02 13:58

_id	2a8b
authors	Purcell, Patrick and Applebaum Dan
year	1990
title	Light Table: An Interface To Visual Information Systems
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 229-238
summary	A primary aim of the Light Table project was to see if a combination of the optical laser disc, local area networks, and interactive videographic workstation technology could bring a major visual collection, (such as the Rotch Visual Collections of the Massachusetts Institute of Technology), to a campuswide population of undergraduate users. VIS (Visual Information System) is the name being given to the new genre of information technology. Much research and development effort is currently being applied to areas where the image has a special significance, for example in architecture and planning, in graphic and fine arts, in biology, in medicine, and in photography. One particular advance in the technology of VIS has been the facility to access visual information across a distributed computer system via LAN (Local Area Networks) and video delivery systems, (such as campus TV cable). This advance allows users to retrieve images from both local and remote sources, dispatching the image search through the LAN, and receiving the images back at their workstation via dedicated channels on the campus TV cable. Light Table is the title of a system that acts as a computer-based interactive videographic interface to a variety of visual information systems described in the body of this paper. It takes its name from the traditional, back- lit, translucent light table that lecturers use to assemble and view collections of slides for talks and seminars. The component of Light Table which is being reported in greatest detail here, a software outcome called Galatea, is a versatile and robust system capable of controlling video devices in a networked environment.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	d703
authors	Tovey, M.
year	1989
title	Drawing and CAD in industrial design
source	Design Studies, Vol. 10, No. 1, pp. 24-39
summary	Drawing is an essential component in the industrial design process, facilitating visual thinking and creativity. It constitutes one type of design model, along with specifications, 3D representations and CAD techniques. The design process involves movement from one model to another, and by using representations of different types and at different levels of detail a fluid and inventive design approach is facilitated. Examples of schematic drawings, ideas sketches and concept drawings demonstrate this in product design and transport design. CAD has proved to be highly effective in evaluative and analytical design development, and in manufacture. It is inherently unsuitable for innovative design, but has potential for contributing to evolutionary design, as is evidenced by its proven effectiveness in engineering optimization. Automotive design is almost always concerned with design evolution, and procedures for car stylists to work productively with CAD are being developed in Coventry Polytechnic's SERC funded research project Computer Aided Vehicle Styling. Vehicle stylist's design thinking is characterized by holistic, right-hemisphere processes informed by tacit knowledge and dependent on visual representation. They have particular difficulties with CAD systems. Nonetheless, design techniques that capitalize on CAD's potential and may be applicable to industrial design are briefly described. CAD drawings and conventional design drawings are compared by using examples from the car industry, and from the research project. Tentative speculations about future design procedures are made.
series	journal paper
last changed	2003/04/23 15:14

For more results click below: