Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 198

Reformat results as: short short into frame detailed detailed into frame

_id	a74a
authors	Asanowicz, Alexander
year	1989
title	Four Easy Questions
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x8v
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.18.1-9.18.4
summary	Should we teach CAAD? - yes, but why? Answer to this question is clear too. Question three - "when?" - on the 5, 6 and 7 term. Why so rate? - it is a compromise because "Architecture is an art" and students of architecture should know how to make a project without computers. How to teach CAAD? - we should teach haw to use professional computer programs and not programming. We must work out a new manual for architects. It should be constructed in such a way as to correspond to consecutive steps of the architectural design process.
keywords	CAAD, Manuals, Architectural Design Process
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6b83
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	1989
title	Towards a New Generation of Computer Assistants for Architectural Design: An Existing Scenario
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f9h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.3.1.8.3.10
summary	The context in which designers operate is becoming more and more complex, owing to the large number of codes, new materials, technologies and professional figures; new instruments are needed, therefore, to support and verify design activity. The results obtained in the first years of 'computer era' were barely sufficient. The hardware and software available today is capable of producing a new generation of CAD systems which can aid the designer in the process of conceiving and defining building objects. At the CAD Laboratory in the Department of Building and Environmental Control Techniques at the 'La Sapienza' University of Rome, research is being carried out with the aim of defining a new kind of Knowledge-based assistant for architectural design. To this purpose a partnership has been established whit a private firm called CARTESIANA, whose partners are software houses, designing and building associations.
keywords	Knowledge-Based Architectural Design
series	eCAADe
last changed	2022/06/07 07:50

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	e3b0
authors	Cottone, Antonio and Buscemi, Maria Rosa
year	1989
title	And if We Take a Bacxward Step...
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f6i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.15.1.9.15.8
summary	In these years the researches on the computer science applied to the building have had a considerable development. The applications concern the whole design process, from the programming to the design and from the execution control to the programmed maintenance with a great deal of problems solved using expert systems. It doesn't seem that the same care of men and means has been dedicated to the architectural design theory, to its deep roots which motivate it and to its peculiarity in comparison with other fields in which now the design, with the aid of the computer, is the only one possible. The designer of architectural objects has been always helped by design assistants: it is enough to think that the sixteenth century treatises are a group of rules, descriptions, solutions to design problems and that they represent the "knowledge" of the age. As the knowledge increased those treatises amplified to the encyclopaedic dimensions of the nineteenth-century handbooks and of those of the first years of this century, while new professional figures rose, the teaching developed and the building art became more and more complex.
series	eCAADe
last changed	2022/06/07 07:50

_id	298e
authors	Dave, Bharat and Woodbury, Robert
year	1990
title	Computer Modeling: A First Course in Design Computing
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 61-76
summary	Computation in design has long been a focus in our department. In recent years our faculty has paid particular attention to the use of computation in professional architectural education. The result is a shared vision of computers in the curriculum [Woodbury 1985] and a set of courses, some with considerable historyland others just now being initiated. We (Dave and Woodbury) have jointly developed and at various times over the last seven years have taught Computer Modeling, the most introductory of these courses. This is a required course for all the incoming freshmen students in the department. In this paper we describe Computer Modeling: its context, the issues and topics it addresses, the tasks it requires of students, and the questions and opportunities that it raises. Computer Modeling is a course about concepts, about ways of explicitly understanding design and its relation to computation. Procedural skills and algorithmic problem solving techniques are given only secondary emphasis. In essential terms, the course is about models, of design processes, of designed objects, of computation and of computational design. Its lessons are intended to communicate a structure of such models to students and through this structure to demonstrate a relationship between computation and design. It is hoped that this structure can be used as a framework, around which students can continue to develop an understanding of computers in design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e33a
authors	De Cola, S., De Cola, B. and Pentasuglia, Francesco
year	1990
title	Messina 1908: The Invisible City
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 239-246
summary	The initial purposes of this work were to build a 3D model of the old city of Messina and to reconstruct a walk through it; to understand the "Ghost city," the parts that form it, and the rules of its plan, which are explicit in some cases but hidden most of the time; to measure its space, appreciate the similarities to and differences from modern city plans, and use the information to improve the plans of tomorrow. It might seem a useless study of a nonexistent city, and yet during the months of detailed work, of patient reconstruction from the surveys and photographs of the city destroyed in 1908, we began to consider how it was still possible to obtain spatial values of and to project behaviors in the lost city, in other words, to practice tests on memory that are very interesting for people working in a context in which memory no longer exists. The work presented here is the first stage of a more complex research project still to be carried out on Messina as it was at the end of the nineteenth century. Here we constructed a 3D model of some parts of the city prior to the earthquake of 1908 and made a five-minute video, using cartoon techniques, of an "impossible" walk through the city. The fragments of the city were reconstructed from available documentary sources, primarily photographic images, which tended to be of the most important places in the city.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	22ed
authors	Glaser, Migges M.
year	1989
title	ART + COM Lab Report - BERKOM Project "New Media in Urban Planning"
doi	https://doi.org/10.52842/conf.ecaade.1989.x.l1t
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 6.1.1-6.1.6
summary	The highly developed glasfiber technology of the Berlin ISDN-B prototype network will make it possible to test a future benefit of the possibilities of real time visual communication for architects and planers in their home office. In the project an external user will be able to share high end visual outputs of a Service Center for Visualisation with his own low end CAAD workstation via ISDN-B. The capabilities of these services will range from a still picture archive, real time access to video film archive, a variety of conventional database services to special postproduction for his own 3D data models. The transferred 3D model can be rendered an animated on the Center's systems, if requested also integrated into a video background film. The production will than be available on his workstation screen. These new means will be evaluated in the view of the architects new possibilities for the design process.
keywords	Multimedia, CAAD Services, Computer Animation
series	eCAADe
last changed	2022/06/07 07:50

_id	20a1
authors	Hall, R.
year	1989
title	Illumination and Color in Computer Generated Imagery
source	New York: Springer Verlag
summary	This is a discussion of the physics of illumination and the associated techniques for modeling global and local illumination in computer generated imagery. It was state-of-the-art in 1988, but is now rather outdated. It does include discussions of physics and color theory basics that have not changed, and a discussion of illumination models through ray tracing models using various specular reflectance functions and including Fresnel effects. This text is currently out of print. However, we still receive numerous requests for an electronic version of the source code in the book.
series	other
last changed	2003/04/23 15:14

_id	maver_062
id	maver_062
authors	Maver, T.W.
year	1989
title	Visual Modelling in Architectural Design
source	Chapter in Computer Graphics in Art, Animation and Design, Springer-Verlag
series	other
type	normal paper
email
last changed	2015/02/20 11:29

_id	cf15
authors	Penttilä, Hannu
year	1989
title	Computer Aided Building Modeling
doi	https://doi.org/10.52842/conf.ecaade.1989.x.d2h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 3.2.1-3.2.11
summary	The subject of computer-aided building modeling is often discussed in various contexts, sometimes without clear explanation of what is modelled. Usually modeling refers to 3-dimensional geometric modeling, but nowadays also conceptual modeling and mathematical simulation aspects are more and more evident. Building modeling should though be considered more widely than just plain geometric visualization. This paper establishes one common framework for discussion about different building modeling viewpoints arranging discipline viewpoints, approach methods, existing standards and application tools within one context. Although several viewpoints are declared conceptual building modeling is regarded the main emphasis of this paper, since it definitely will be one of the key issues in developing methods and tools for computer integrated construction (CIC) in the future.
keywords	Building Modeling, Building Information and Data, Product Modeling, Conceptual Modeling, Geometric Modeling, Standards, Application Programs
series	eCAADe
email
more	http://www.tut.fi/~penttila/index.html
last changed	2022/06/07 07:50

_id	c5a8
authors	Schmitt, Gerhard N. (Ed.)
year	1991
title	CAAD Futures '91 [Conference Proceedings]
source	International Conference on Computer-Aided Architectural Design 1989/ ISBN 3-528-08821-4 / Zürich (Switzerland), July 1991, 594 p.
summary	Computer Aided Architectural Design (CAAD) is the art of design and computation. Since the establishment of the CAAD futures organization in 1985, experts meet every two years to explore the state-of-the-art and postulate on future development in Computer Aided Architectural Design. The fourth international CAAD futures conference took place in July 1991 in Zürich at the Swiss Federal Institute of Technology (ETH Zürich), organized by the Chair for CAAD. More than 220 participants from 25 countries attended the conference. Presentation topics were education, research, and application. The mission of CAAD futures '91 was to provide an international forum for the dissemination and discussion of future oriented developments and new experiences in the field of Computer Aided Architectural Design. This book is one result of the conference and is divided into three sections: Education, Research and Application. This international overview of the 1991 state-of-the- art in Computer Aided Architectural Design will serve as a reference for design teachers, researchers, and application developers interested in CAAD.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	8a0c
authors	Tan, Milton
year	1990
title	Saying What It Is by What It Is Like - Describing Shapes Using Line Relationships
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 201-213
summary	Shapes - taken as well-defined collections of lines - are fundamental building blocks in architectural drawings. From doodles to shop drawings, shapes are used to denote ideas and represent elements of design, many of which ultimately translate into actual objects. But because designs evolve, the shapes representing a design are seldom static - instead, they are perpetually open to transformations. And since transformations involve relationships, conventional methods of describing shapes as sets of discrete endpoints may not provide an appropriate foundation for schematic design. This paper begins with a review of the perception of shapes and its significance in design. In particular, it argues that juxtapositions and inter-relationships of shapes are important seedbeds for creative development of designs. It is clear that conventional representation of shapes as sets of discrete lines does not cope with these -emergent" subshapes; the most basic of which arise out of intersecting and colinear lines. Attempts to redress this by using ‘reduction rules’ based on traditional point-and-line data structures are encumbered by computational problems of precision and shape specification. Basically, this means that some ‘close’ cases of sub-shapes may escape detection and their specifications are difficult to use in substitution operations. The paper presents the findings of a computer project - Emergence II - which explored a 'relational' description of shapes based on the concept of construction lines. It builds on the notion that architectural shapes are constructed in a graphic context and that, at a basic compositional level, the context can be set by construction lines. Accordingly, the interface enables the delineation of line segments with reference to pre-established construction lines. This results in a simple data structure where the knowledge of shapes is centralized in a lookup table of all its construction lines rather than dispersed in the specifications of line segments. Taking this approach, the prototype software shows the ease and efficiency of applying ‘reduction rules’ for intersection and colinear conditions, and for finding emergent sub-shapes by simply tracking the construction lines delimiting the ends of line segments.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	2bb6
authors	Van Bakergem, Dave
year	1990
title	Image Collections in the Design Studio
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 261-271
summary	No matter what the medium, architects are constantly using images in all aspects of design thinking. Whether it is the perception of the environment, an image in the mind's eye, an abstract drawing or a photographic record, designers use images to conceive of, and manipulate their design ideas. Managing these image collections occurs at a variety of levels in the creative process and is dependent on the type of image that is called upon for reference. The most basic example would be the image collection residing in the mind's memory which is a result of the designer’s world experiences and the relative impressiveness of each experience. Clearly, personal memory plays a significant role in the use of imagery in design, but it is unreliable and can be abstracted in uncontrollable ways. The sketchbook and later photographic collections of the grand tour were the beginnings of efforts to manage and utilize image collections as an aid to drawing and thinking about design. Now the capacity to use electronic means of creating, altering, storing, and retrieving images will enable designers to effectively use large image collections in ways that have not been possible before. This paper describes current work at the School of Architecture at Washington University in a graduate design studio. The students use a powerful 3D modeling CAD system (HOKDraw) to design and present their studio projects. In addition, we are experimenting with an image storage and retrieval system which is directly linked to the CAD model through a relational database (INGRES). Access to the database and images is instantly available through the command language and graphic display. The CAD model in effect becomes a 3D menu to an extensive image database stored on an optical memory disc recorder. Several collections are available to the studio members: the library's slide collection which relates to the studio project, specific photographs and drawings of the project site, and personal image collections stored by individuals for their own reference. The commonly accessible images are basically background material and images collected by the students to document the site, urban context and building typology. The personal images collections are any images (drawings, photographs, published images, CAD images) created or collected by the students for purposes of informing their design thinking. This work relates to the use of precedents and typology in architecture as a point of departure as well as in development of design ideas.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	29d2
authors	Barsky, Brian A. and DeRose,Tony D.
year	1989
title	Geometric Continuity of Parametric Curves: Three Equivalent Characterizations
source	IEEE Computer Graphics and Applications. November, 1989. vol. 9: pp. 60-68 : ill. includes bibliography
summary	Geometric continuity of curves has received a good deal of research attention in recent years. The purpose of this article is to distill some of the important basic results into a self-contained presentation. The January 1990 issue of CG&M presents a paper that continues the discussion by offering applications of the theoretical background provided here
keywords	continuity, parametrization, curves, computational geometry, representation
series	CADline
last changed	2003/06/02 13:58

_id	4cf2
authors	Barsky, Brian A.
year	1990
title	Geometric Continuity of Parametric Curves : Constructions of Geometrically Continuous Splines
source	IEEE Computer Graphics and Applications. January, 1990. vol. 10: pp. 60-68 : ill
summary	This article is part two of an article published in November 1989. In the first article theoretical foundations for geometric continuity were presented. In this article the basic theory was applied to the construction of geometrically continuous spline curves
keywords	Bezier, curves, curved surfaces, splines, continuity, computational geometry, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	6bfa
authors	Bijl, Aart
year	1989
title	Evaluation and Representation
source	December, 1989. 11 p. : ill. includes bibliography
summary	In this paper the author will consider four key concepts: design, evaluation, models, and representation. In combination, definitions of these concepts impinge on each other and they are further conditioned by the author intention to represent design knowledge within computers. The issue of human-computer interaction then becomes critical to the usefulness of knowledge representations for designers
keywords	CAD, representation, design, evaluation
series	CADline
last changed	1999/02/12 15:07

_id	e19d
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1989
title	Capturing Designer Expertise : The CGEN System
source	18 p. : ill Pittsburgh, PA: Engineering Design Research Center, CMU, August, 1989. EDRC 18-08-89. includes bibliography.
summary	Knowledge-based systems are becoming pervasive in the computer-aided design area. For these systems to achieve satisfactory levels of performance large amounts of knowledge are necessary. However, the acquisition of knowledge is a difficult and tedious task. Automated knowledge-acquisition tools (AKAT) provide capabilities for quickly building and maintaining knowledge-bases. This paper describes the CGEN AKAT, which allows hardware designers, unfamiliar with artificial intelligence programming techniques, to deposit their expertise into a synthesis tool's knowledge-base. A set of experiments which tested CGEN's capabilities are presented. The experiments show that with CGEN hardware designers can produce high quality knowledge-bases
keywords	CAD, automation, knowledge acquisition, tools, AI, programming, knowledge base, systems, integrated circuits, hardware
series	CADline
last changed	2003/06/02 10:24

For more results click below: