Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 202

Reformat results as: short short into frame detailed detailed into frame

_id	0ecb
authors	Waerum, Jens and Rüdiger Kristiansen, Bjarne
year	1989
title	CAAD Education at the School of Architecture Copenhagen
doi	https://doi.org/10.52842/conf.ecaade.1989.x.q8k
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.5.1-4.5.9
summary	The establishment of Datacentret (the Data Centre) in summer 1985 was preceded by 15 years slow- moving, arduous work from the early experiments in what was then the computing laboratory under the supervision of architect Per Jacobi, author of the Danish 3D drawing system MONSTER, until 1984, when a special committee was commissioned to draw up proposals for the introduction of teaching in computing at the Architects School. In spring 1985 the school administrators decided that a central computer workshop should be set up and in cooperation with the school's institutes placed jointly in charge of instructing teachers and students, carrying out research and development within the field of architecture and taking steps to work out a curriculum of supplementary training for practising architects. With the aid of a special grant, 12 PC's were successfully acquired in the 2 years that followed, as well as a screen projector and other peripherals.
series	eCAADe
last changed	2022/06/07 07:50

_id	e3b0
authors	Cottone, Antonio and Buscemi, Maria Rosa
year	1989
title	And if We Take a Bacxward Step...
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f6i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.15.1.9.15.8
summary	In these years the researches on the computer science applied to the building have had a considerable development. The applications concern the whole design process, from the programming to the design and from the execution control to the programmed maintenance with a great deal of problems solved using expert systems. It doesn't seem that the same care of men and means has been dedicated to the architectural design theory, to its deep roots which motivate it and to its peculiarity in comparison with other fields in which now the design, with the aid of the computer, is the only one possible. The designer of architectural objects has been always helped by design assistants: it is enough to think that the sixteenth century treatises are a group of rules, descriptions, solutions to design problems and that they represent the "knowledge" of the age. As the knowledge increased those treatises amplified to the encyclopaedic dimensions of the nineteenth-century handbooks and of those of the first years of this century, while new professional figures rose, the teaching developed and the building art became more and more complex.
series	eCAADe
last changed	2022/06/07 07:50

_id	c2ed
authors	De Vries, Mark and Wagter, Harry
year	1990
title	A CAAD Model for Use in Early Design Phases
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 215-228
summary	In this paper we present a model for handling design information in the early design phases. This model can be used for representing both vague and exact defined information. The first part describes the difficulties involved in using CAD in the architectural design process and the characteristics of that process. Then we give a description of the design information and its representation during the design process. Next an overview of the architectural design process describes how design information is added and manipulated during the design process in order to achieve an effective result. Finally, we include a brief description of a simple prototype program to illustrate how this theory acts in practice.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	10a5
authors	Edwards, D.M. and Hardman, L.
year	1989
title	Lost In Hyperspace: Cognitive Mapping and Navigation in a Hypertext Environment, Chapter 7
source	Hypertext: Theory Into Practice, Edited by McAleese, Ray., Ablex Publishing Corporation, New Jersey
summary	This paper describes an experiment which looks at how the users of a hypertext document cognitively represent its layout. A document was formed into three different hypertext styles and was presented to the readers, they were then asked a series of questions about information contained in the hypertexts. The way the users found the answers and the time taken was recorded, they were also ask to lay out cards, with reduced versions of the screen on them, on a board and as they thought them to be arranged in the document and also to draw any connecting hypertext links they thought existed between these screens. The users selected for this experiment consisted of 27 university undergraduates 15 male and 12 female with a mean age of 20.5 years with little or no computing experience. They were each assigned one of the three hypertext methods and their performance was recorded. The three methods consisted of a hierarchical, a mixed and an index based method.
series	other
last changed	2003/04/23 15:14

_id	e378
authors	Gerken, H.
year	1989
title	Performance and Problems of Software Surveys
doi	https://doi.org/10.52842/conf.ecaade.1989.x.h3l
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 6.3.1-6.3.4
summary	The general purpose of surveys of products and services is to give a first information on a special market segment to the potential buyer. Therefore such surveys have an important transmitting and at the same time objectifying task. There is a lot of software surveys in West Germany and German-speaking neighboring countries, for instance the well known Nomina Reports. Besides these general, many application fields and computer classes comprising surveys there are special ones which are sometimes part of a larger publication. In the field of architecture there are two special software surveys available: the survey of the Swiss engineers and architects association (SIA) and the survey of the Institute of Architecture and Planning Theory (IAP) of the University of Hannover.
series	eCAADe
last changed	2022/06/07 07:50

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	afa9
authors	Oxman, Robert, and Oxman, Rivka
year	1989
title	The Joy of Syntax
doi	https://doi.org/10.52842/conf.ecaade.1989.x.m1j
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.3.1-5.3.26
summary	The article describes an approach to teaching syntactical aspects of design and architectural composition by means of exercises utilizing various computer graphics programs. The theoretical assumptions and the background of formal studies are reviewed as sources of this approach. A working definition of Architectural Knowledge and Design Knowledge is postulated as the theoretical foundation of Computer- Aided Learning. The term, Architectural Syntax, is proposed as the formalization of this knowledge. The pedagogical significance of computers as a medium of design education is analyzed, and the particular role of syntactical knowledge in design, the computation of design and in C A.L. in design is identified. An outline of the course, The Joy of Syntax, is described and future research and development in these fields discussed.
keywords	Computer-Aided Learning (C.A.L.), Architectural Syntax, Design Theory
series	eCAADe
email
last changed	2022/06/07 07:50

_id	7812
authors	Straber, W. and Seidel, H.-P. (eds.)
year	1989
title	Theory and Practice of Geometric Modeling
source	Springer-Verlag
summary	This book originates from the lectures given at the international conference "Theory and Practice of Geometric Modeling", Blaubeuren, FRG, October 3-7, 1988, that brought together leading experts from universities, system developers, and system users, to discuss new concepts and future trends in geometric modeling. The book covers a variety of topics on an advanced level and is organized as follows. Part A contains new algorithms and techniques for modeling objects that are bounded by free form surfaces. Part B focuses on surface/surface intersections, new types of blending surfaces and speed ups for ray tracing. Part C contains some new geometric tools. Part D discusses different representation schemes in solid modeling, conversions between these different schemes, and some applications. Part E covers some issues of product modeling, automatic tolerancing, high level specification of solid models (constraints, features) and the need for better user interfaces.
series	other
last changed	2003/04/23 15:14

_id	0e93
authors	Af Klercker, Jonas
year	1989
title	Interactive Animation on the Macintosh II
doi	https://doi.org/10.52842/conf.ecaade.1989.x.a0t
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.5.1-9.5.6
summary	The efficiency of images in communication between humans has so far been used almost exclusively by TV and other mass medias. The costs have been too great to encourage the use of images in the financially restricted everyday practice of architecture. With a range of application programs for the Apple Macintosh II the vision has come close to reality. It is now possible to create guided walks with the chance to choose different routes and views in a model of buildings and surroundings in 256 colour graphics. The makers of these programs may not have foreseen this use for their products and that is why it takes quite a lot of effort to make all the necessary images. With some supplementary routines however, this will be made much easier. Animation can also be used to visualize different processes inside a building. We have been studying the working environment in mechanical industry. The goal of this project is to make communication possible between the workers at all levels of an organization in planning changes and has so far been very successful. The use of this technique is only limited by our imagination and funding. Some examples to be tested in the near future are "Escape at a fire", "Animation of a Dairy", "Traffic situations in a parking lot-, "CAD-working place" and others. One of the difficulties in interactive planning with users has been to come close enough to their reality. With animated images it is possible to visualize what is going to happen and what it is going to look like in a more understandable way. In education this must be a challenging possibility. Changes and processes are some of the most difficult subjects to describe and explain! The software used is a handful of individual programs which, thanks to the graphics standards of the Macintosh, can exchange data with each other.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	45e6
authors	Agger, Kristian and Lentz, Uffe (Eds.)
year	1989
title	CAAD: Education - Research and Practice [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1989
source	eCAADe Conference Proceedings / ISBN 87-982875-2-4 / Aarhus (Denmark) 21-23 September 1989
summary	In the announcement of the sixth eCAADe Conference we stated that It is held at a time where CAAD is moving into practice very fast, with heavy influence on research and education. We stated that research is directed towards the early design phases, and that education is facing the problem of mass education. In that situation much benefit can be obtained from collaboration with practice. We decided to give the conference the title “CAAD: Education - Research and Practice” to state the importance of practice as a test bench. The conference papers cover education and research in depth in many important areas and give a good overview, whereas the practical theme is more or less missing, indicating, that experience here is still modest. At the lecture material market and the exhibition the situation is opposite and shows state of art in practical use.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	a74a
authors	Asanowicz, Alexander
year	1989
title	Four Easy Questions
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x8v
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.18.1-9.18.4
summary	Should we teach CAAD? - yes, but why? Answer to this question is clear too. Question three - "when?" - on the 5, 6 and 7 term. Why so rate? - it is a compromise because "Architecture is an art" and students of architecture should know how to make a project without computers. How to teach CAAD? - we should teach haw to use professional computer programs and not programming. We must work out a new manual for architects. It should be constructed in such a way as to correspond to consecutive steps of the architectural design process.
keywords	CAAD, Manuals, Architectural Design Process
series	eCAADe
email
last changed	2022/06/07 07:50

_id	4032
authors	Barron, Christopher L.
year	1989
title	3-D Modelling
source	architectural and Engineering Systems. April, 1989. [41] -56 unevenly numbered
summary	From screen to structure, more and more AEs are finding design solutions in the third dimension. The author reviews current 3-D modeling systems, what are the expectations of the users and the developers goals
keywords	architecture, practice, drafting, modeling, systems
series	CADline
last changed	2003/06/02 13:58

_id	4cf2
authors	Barsky, Brian A.
year	1990
title	Geometric Continuity of Parametric Curves : Constructions of Geometrically Continuous Splines
source	IEEE Computer Graphics and Applications. January, 1990. vol. 10: pp. 60-68 : ill
summary	This article is part two of an article published in November 1989. In the first article theoretical foundations for geometric continuity were presented. In this article the basic theory was applied to the construction of geometrically continuous spline curves
keywords	Bezier, curves, curved surfaces, splines, continuity, computational geometry, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	44b3
authors	Cajati, Claudio
year	1989
title	Towards A KB System / Image-Databases - Integrated Interface: A Tool For Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1989.x.e2p
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.9.1-9.9.7
summary	Focusing on the tasks of university architectural education, a special stress is first laid on the possibility of going beyond some limits of traditional CAAD. as coming out from the recent debate, and on the opportunities offered by knowledge based systems as metadesign supports in architectural domains. Particularly, with regard to image-databases, their importance for explaining and exemplifying the knowledge representation in KB Systems, and their integration via intelligent interface are discussed. At last, some possible uses of the whole as an educational tool in the daily university training are proposed.
keywords	Architectural Education, KB System, Image-database, Interface
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6b83
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	1989
title	Towards a New Generation of Computer Assistants for Architectural Design: An Existing Scenario
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f9h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.3.1.8.3.10
summary	The context in which designers operate is becoming more and more complex, owing to the large number of codes, new materials, technologies and professional figures; new instruments are needed, therefore, to support and verify design activity. The results obtained in the first years of 'computer era' were barely sufficient. The hardware and software available today is capable of producing a new generation of CAD systems which can aid the designer in the process of conceiving and defining building objects. At the CAD Laboratory in the Department of Building and Environmental Control Techniques at the 'La Sapienza' University of Rome, research is being carried out with the aim of defining a new kind of Knowledge-based assistant for architectural design. To this purpose a partnership has been established whit a private firm called CARTESIANA, whose partners are software houses, designing and building associations.
keywords	Knowledge-Based Architectural Design
series	eCAADe
last changed	2022/06/07 07:50

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8775
authors	Cigolle, Mark and Coleman, Kim
year	1990
title	Computer Integrated Design: Transformation as Process
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary	To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

For more results click below: