Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 171

Reformat results as: short short into frame detailed detailed into frame

_id	2db4
authors	Schmitt, Gerhard
year	1992
title	Design for Performance
source	New York: John Wiley & Sons, 1992. pp. 83-100 : ill. includes bibliography Design for performance describes a generative approach toward fulfilling qualitative and quantitative design requirements based on specification and existing cases. The term design applies to the architectural domain: the term performance includes the aesthetic, quantitative, and qualitative behavior of an artifact. In achieving architectural quality while adhering to measurable criteria, design for performance has representational, computational, and practical advantages over traditional methods, in particular over post-facto single- and multicriteria analysis and evaluation. In this paper a proposal for a working model and a partial implementation of this model are described. architecture / evaluation / performance / synthesis / design / representation / prediction / integration. Ô h)000*°° ÔŒ21. Schneekloth, Lynda H., Rajendra K. Jain and Gary E. Day. 'Wind Study of Pedestrian Environments.' February, 1989. 30, [2] p. : ill. includes bibliography and index.
summary	This report summarizes Part 1 of the research on wind conditions affecting pedestrian environments for the State University of New York at Buffalo. Part 1 reports on existing conditions in the main part of the North Campus in Amherst. Procedures and methods are outlined, the profile of the current situation reported, and a special study on the proposed Natural Science and Math Building are included
keywords	architecture, research, evaluation, analysis, simulation, hardware
series	CADline
last changed	1999/02/12 15:09

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia06_079
id	acadia06_079
authors	Kumar, Shilpi
year	2006
title	Architecture and Industrial Design A Convergent Process for Design
doi	https://doi.org/10.52842/conf.acadia.2006.079
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 79-94
summary	The use of technology has grown with the way design professions have evolved over time. Changing needs, desires of comfort, and perceptions of the consumers have led to a distinct improvement in the design of both product and architecture. The use of the digital media and emerging technologies has brought a dramatic change to the design process allowing us to view, feel, and mould a virtual object at every stage of design, development, and engineering. Change is often quick and easy since a virtual product does not inherently carry the biases of its physical counterpart. In order to communicate ideas across the team, digital processes are also used to bring together opinions, experiences, and perspectives. These methods encourage decision making based on information rather than prejudice or instinct. Thus, digital exchanges (technology) impact firm strategies at three levels: product, process, and administrative or support activities (Adler 1989).Digital tools for design exchange in Industrial Design (ID) began much earlier than many other professions. The profession of Architecture is also slowly moving to a similar model with digital exchange finding increasing prevalence in drawing, modeling, performance simulation, design collaboration, construction management, and building fabrication. The biggest problem is the disintegrated use of technology in the architectural profession without a strategy toward streamlining the design process from conception to fabrication. In this paper we investigate how the use of technology has evolved in the professions of Industrial Design and Architecture comparatively in their product, process, and support activities. Further, we will present a set of guidelines that will help architects in the convergence of design process, helping in a more efficient work flow with a strategic use of digital technology.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	cf15
authors	Penttilä, Hannu
year	1989
title	Computer Aided Building Modeling
doi	https://doi.org/10.52842/conf.ecaade.1989.x.d2h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 3.2.1-3.2.11
summary	The subject of computer-aided building modeling is often discussed in various contexts, sometimes without clear explanation of what is modelled. Usually modeling refers to 3-dimensional geometric modeling, but nowadays also conceptual modeling and mathematical simulation aspects are more and more evident. Building modeling should though be considered more widely than just plain geometric visualization. This paper establishes one common framework for discussion about different building modeling viewpoints arranging discipline viewpoints, approach methods, existing standards and application tools within one context. Although several viewpoints are declared conceptual building modeling is regarded the main emphasis of this paper, since it definitely will be one of the key issues in developing methods and tools for computer integrated construction (CIC) in the future.
keywords	Building Modeling, Building Information and Data, Product Modeling, Conceptual Modeling, Geometric Modeling, Standards, Application Programs
series	eCAADe
email
more	http://www.tut.fi/~penttila/index.html
last changed	2022/06/07 07:50

_id	03f1
authors	Smeltzer, Geert T.A.
year	1989
title	A CAAD Curriculum
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f8c
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.5.1-5.5.12
summary	This paper is about the backgrounds, the present state, the results and the future expectations of the curriculum of Calibre, at the Faculty of Architecture and Building Science of the Eindhoven University of Technology. It will also touch upon the relationships with project work in our field but also in other fields of our Architectural (and Building) education. In the paper it is emphasised that teachers need to create a need for the use of certain features of computer systems. To make students aware of the (possible) CAD needs and answering to those needs at a more or less individual way asks a high level of understanding of the underlying concept and features of the CAD systems. Because of the flexibility (amongst other qualities), we, and so many others, have made a choice to use AutoCAD as 8 kind of thread that runs through our curriculum continuously and that exists out of 6 main parts. These parts vary from an introduction to Integrated Data Processing via CADD, Graphics and Data Structures and Expert Systems to System Development Methods. Half of our curriculum Is compulsory for all the faculty students, the other half is facultative but very well attended.
series	eCAADe
last changed	2022/06/07 07:50

_id	8a0c
authors	Tan, Milton
year	1990
title	Saying What It Is by What It Is Like - Describing Shapes Using Line Relationships
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 201-213
summary	Shapes - taken as well-defined collections of lines - are fundamental building blocks in architectural drawings. From doodles to shop drawings, shapes are used to denote ideas and represent elements of design, many of which ultimately translate into actual objects. But because designs evolve, the shapes representing a design are seldom static - instead, they are perpetually open to transformations. And since transformations involve relationships, conventional methods of describing shapes as sets of discrete endpoints may not provide an appropriate foundation for schematic design. This paper begins with a review of the perception of shapes and its significance in design. In particular, it argues that juxtapositions and inter-relationships of shapes are important seedbeds for creative development of designs. It is clear that conventional representation of shapes as sets of discrete lines does not cope with these -emergent" subshapes; the most basic of which arise out of intersecting and colinear lines. Attempts to redress this by using ‘reduction rules’ based on traditional point-and-line data structures are encumbered by computational problems of precision and shape specification. Basically, this means that some ‘close’ cases of sub-shapes may escape detection and their specifications are difficult to use in substitution operations. The paper presents the findings of a computer project - Emergence II - which explored a 'relational' description of shapes based on the concept of construction lines. It builds on the notion that architectural shapes are constructed in a graphic context and that, at a basic compositional level, the context can be set by construction lines. Accordingly, the interface enables the delineation of line segments with reference to pre-established construction lines. This results in a simple data structure where the knowledge of shapes is centralized in a lookup table of all its construction lines rather than dispersed in the specifications of line segments. Taking this approach, the prototype software shows the ease and efficiency of applying ‘reduction rules’ for intersection and colinear conditions, and for finding emergent sub-shapes by simply tracking the construction lines delimiting the ends of line segments.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	425e
authors	Van Wyk, Skip G.
year	1989
title	A Geometrybased Insolation model for Computer-aided Building Design
source	University of Michigan
summary	Insolation modeling is a unique aspect of building energy-use modeling that determines the energy incident on building surfaces due to the interaction of the sun, the clouds and atmosphere, and reflection from the ground and adjacent surfaces. Though its established roots lie in the fields of meteorology and mechanical engineering, insolation modeling can be used in architectural applications as an analysis tool on which to base design decisions. This dissertation described one application of insolation modeling for use in the early stages of building design, and presented an overview of the methods and techniques used to implement such a geometry-based insolation model. The model was evaluated for real world conditions using a scaled physical model, configured to represent an architectural facade typical of energy-responsive design, and instrumented under a range of sky conditions (clear, partly cloudy, and overcast) over a two-week period. The emittances of the surfaces representing the sky were measured using a computer-controlled, multipurpose automatic scanning photometer (MASP) developed by Pacific Northwest Laboratories.
series	thesis:PhD
email
last changed	2003/03/29 18:15

_id	020e
authors	Wade, John W. and Baur, J. Scott
year	1989
title	Evaluation According to a Metric for Visual Order
source	December 1989. 18 p. includes bibliography
summary	Varying degrees of stimulus in the environment are appropriate to different tasks, so a uniform level of order in design cannot account for the many activities that will take place in a building. An ability to measure the visual order in a scene would facilitate the evaluation of design proposals. The designer could apply such a measure to establish a preferred level of order for a particular activity. A measure of order would also make possible the evaluation of the finished building product in terms of its use and in terms of any explicit goals of the designer. This paper describes a group of hypotheses proposed by Wade in a 1976 paper intended to develop a metric for visual order. It then examines the available literature to include other research that relates to this topic. It brings the earlier hypotheses up to date, outlines a strategy for testing those hypotheses, and proposes to develop the metric using computer image processing techniques. It also describes the methods that will be applied to validate the metric against the order that people perceive in the environment. To establish an objective standard for order, the metric that assesses the order will address only the features and attributes specific to scene. Thus, the measure will depend on neither the semantic content nor the figural properties of the field. The hypotheses under investigation are: (1) That visual order is related to the number of potential figure-ground shifts present in a visual field; (2) that the number of figure- ground shifts is dependent on the degree of articulation of the field; (3) that the number of figure-ground shifts is dependent on the distribution of color in the visual field; and (4) that the number of figure-ground shifts is dependent on the structure of the visual field. The various components of these elements are also detailed. From this, the designer will be able to determine which components of a design possess the appropriate level of order for a given task and which do not. The direct application of these principles will be explored in the design studio
keywords	evaluation, analysis, aesthetics, form
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	8775
authors	Cigolle, Mark and Coleman, Kim
year	1990
title	Computer Integrated Design: Transformation as Process
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary	To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	a718
authors	Cuomo, Donna L. and Sharit, Joseph
year	1989
title	A Study of Human Performance in Computer-Aided Architectural Design
source	International Journal of Human-Computer Interaction. 1989. vol. 1: pp. 69-107 : ill. includes bibliography
summary	This paper describes the development and application of a cognitively-based performance methodology for assessing human performance on computer-aided architectural design (CAAD) tasks. Two CAAD tasks were employed that were hypothesized to be different in terms of the underlying cognitive processes required for these tasks to be performed. Methods of manipulating task complexity within each of these tasks were then developed. Six architectural graduate students were trained on a commercially available CAAD system. Each student performed the two experimental design tasks at one of three levels of complexity. The data collected included protocols, video recordings of the computer screen, and an interactive script (time-stamped record of every command input and the computers textual response). Performance measures and methods of analysis were developed which reflected the cognitive processes used by the human during design (including problem- solving techniques, planning times, heuristics employed, etc.) and the role of the computer as a design aid. The analysis techniques used included graphical techniques, Markov process analysis, protocol analysis, and error classification and analysis. The results of the study indicated that some measures more directly reflected human design activity while others more directly reflected the efficiency of interaction between the computer and the human. The discussion of the results focuses primarily on the usefulness of the various measures comprising the performance methodology, the usefulness of the tasks employed including methods for manipulating task complexity, and the effectiveness of this system as well as CAAD systems in general for aiding human design processes
keywords	protocol analysis, problem solving, planning, CAD, design process, performance, architecture
series	CADline
last changed	2003/06/02 13:58

_id	b66a
authors	Dvorak, Robert W.
year	1989
title	CAD Tools for Systems Theory and Bottom Up Design
doi	https://doi.org/10.52842/conf.acadia.1989.209
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 209-226
summary	The use of CAD is investigated in the teaching of systems theory to a fourth year group of design students. A comparison is made between the CAD group using MacArchitrion and a non-CAD group using traditional design methods. The paper includes a discussion of the meaning of systems design theories, relates the CAD and non-CAD student design methods and illustrates the results. It also includes recommendations for improvements so the computer can become more effective in this type of design teaching. Finally, it concludes with recommendations from the students at the end of the semester project. The basic premise for the CAD design group is that computers should encourage students to understand and use systems design theory.
series	ACADIA
last changed	2022/06/07 07:55

_id	10a5
authors	Edwards, D.M. and Hardman, L.
year	1989
title	Lost In Hyperspace: Cognitive Mapping and Navigation in a Hypertext Environment, Chapter 7
source	Hypertext: Theory Into Practice, Edited by McAleese, Ray., Ablex Publishing Corporation, New Jersey
summary	This paper describes an experiment which looks at how the users of a hypertext document cognitively represent its layout. A document was formed into three different hypertext styles and was presented to the readers, they were then asked a series of questions about information contained in the hypertexts. The way the users found the answers and the time taken was recorded, they were also ask to lay out cards, with reduced versions of the screen on them, on a board and as they thought them to be arranged in the document and also to draw any connecting hypertext links they thought existed between these screens. The users selected for this experiment consisted of 27 university undergraduates 15 male and 12 female with a mean age of 20.5 years with little or no computing experience. They were each assigned one of the three hypertext methods and their performance was recorded. The three methods consisted of a hierarchical, a mixed and an index based method.
series	other
last changed	2003/04/23 15:14

_id	25de
authors	Ervamaa, Pekka
year	1993
title	Integrated Visualization
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 157-160
summary	The Video and Multimedia studio at VTT, Technical Research Centre of Finland, started with endoscopy photography of scale models. Video recordings has been made since 1985 and computer graphic since 1989. New visualization methods and techniques has been taken into use as a part of research projects, but mainly we have been working with clients commissions only. Theoretical background for the visualizations is strong. Research professor Hilkka Lehtonen has published several papers concerning the theory of visualization in urban planning. This studio is the only professional level video unit at Technical Research Centre, which is a large polytechnic research unit. We produce video tapes for many other research units. All kind of integrated methods of visualization are useful in these video productions, too.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	8cff
authors	Fridqvist, Sverker
year	1989
title	Computers as a Creative Tool in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1989.x.k1l
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.6.1-9.6.4
summary	The School of Architecture at Lund Institute of Technology was augmented by the establishment of the Computer Studio in 1987. As a result the school now has a device for teaching and research in the architects' use of computers. We are now conducting several research projects as well as courses and an education project. The third and fourth years of the education at the school of architecture are arranged as education projects instead of traditional lecturing. The students choose from projects that are organised by different departments at the School of Architecture. The issue is that the students will ask for instruction when felt needed, and that learning will therefore be more efficient. The Computer Studio has conducted such a project during the first half of 1989. We have tried to encourage the students to use our different computers and programs in new and creative ways. One of the issues of the computer project is to teach the students how computers are used at the architects offices today as well as expected future developments. The students shall be acquainted well enough with present and future possibilities to make good choices when deciding upon buying computers for architectural use. Another issue is to develop new ways of making and presenting architecture by using computers. As a group the teachers at the school of architecture have a very restrictive attitude towards the use of computers. We hope that our project will open their minds for the possibilities of computers, and to engage them in the development of new ways to use computers creatively in architecture. An interesting question is if the use of computers will yield different outcomes of he students' work than traditional methods. An object for research is whether the added possibilities of considering different aspects of he design by using a computer will make for higher quality of the results.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	a9b9
authors	Galle, Per
year	1989
title	Computer Methods in Architectural Problem Solving : Critique and Proposals
source	Journal of Architectural and Planning Research. Spring, 1989. vol. 6: pp. 34-54 : ill. includes bibliography
summary	While the development of modelling and drafting tools for computer-aided design has reached a state of considerable maturity, computerized decision support in architectural sketch design is still in its infancy after more than 20 years. The paper analyzes the difficulties of developing computer tools for architectural problem solving in the early stages of design where decisions of majors importance are made. The potentials of computer methods are discussed in relation to design as a static system of information, and to design as a creative process. Two key problems are identified, and on this background current computer methods intended for use in architectural sketch design are critically reviewed. As a result some guidelines are suggested for future research into computer-aided architectural problem solving. The purpose of the paper is twofold: (1) to encourage research that will take this field into a state of maturity and acceptance by practitioners, and (2) to provoke further debate on the question of how to do it
keywords	architecture, CAD, design process, information, problem solving
series	CADline
last changed	1999/02/12 15:08

_id	e3c7
authors	Galle, Per
year	1989
title	Computer Methods in Architectural Problem Solving: Critique and Proposals
doi	https://doi.org/10.52842/conf.ecaade.1989.x.t9u
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 6.4.1-6.4.21
summary	While the development of modeling and drafting tools for computer-aided design has reached a state of considerable maturity, computerized decision support in architectural sketch design is still in its infancy after more than 20 years. The paper analyzes the difficulties of developing computer tools for architectural problem solving in the early stages of design where decisions of major importance are made. The potentials of computer methods are discussed in relation to design as a static system of information and to design as a dynamic creative process. Two key problems are identified, and on this background current computer methods intended for use in architectural sketch design are critically reviewed. As a result some guidelines are suggested for future research into computer- aided architectural problem solving. The purpose of the paper is twofold: (1) to encourage research that will take this field into a state of maturity and acceptance by practitioners, and (2) to provoke further debate on the question of how to do it.
series	eCAADe
last changed	2022/06/07 07:50

_id	841d
authors	Gilleard, John D.
year	1989
title	Integrating Microcomputer CADr and Bill of Material Routines Using AutoCad
doi	https://doi.org/10.52842/conf.ecaade.1989.x.r8o
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.2.1-9.2.10
summary	Through the integration of microcomputer-aided draughting (CADr), and in particular with AutoCAD, the industries most extensively used CADr program, and automated routines for the production of bills of materials, a dramatic incr-ease in productivity is possible in the architectural design domain. Working from a variety of material take off methods complete cost estimates may be achieved through the manipulation of drawing data and exchanging the information with third-party estimating software. However, the area of study is currently at a formative stage of development and full integration, although technically feasible, is rarely attempted. Therefore, the paper comments on the development of 'in-house' routines using AutoCAD's data extraction features and AutoLISP; reviews current commercial systems of interfacing AutoCAD with bills of materials and automated specification routines; and, finally, discusses possible future advances in this major area of study.
keywords	AutoCAD, Bills-of-Materials, Integration
series	eCAADe
last changed	2022/06/07 07:50

_id	1a4e
authors	Goel, Ashok Kumar
year	1989
title	Integration of case-based reasoning and model-based reasoning for adaptive design problem solving
source	Ohio State University
summary	In the case-based approach to design, a novel problem is solved by adapting a design known to solve a related problem. Adapting a known design to solve a related problem by the commonly used methods of heuristic association and search, however, can be computationally expensive if the adaptation search space is not small. The adaptation space, then, needs to be decomposed into smaller and simpler spaces that can be searched more efficiently and effectively. The knowledge for decomposing the adaptation search space can be represented as a behavior-structure model that specifies how the structure of the known design results in its output behaviors. This research investigates the use of such behavior-structure models for adapting the designs of physical devices. Comprehension of how the output behaviors of a design arise from its structure is represented as a behavioral component-substance model for the design. The model explicitly specifies (i) the expected output behaviors of the design including its functions, (ii) the elementary structural and behavioral interactions between components and substances constituting the structure of the design, and (iii) the internal causal behaviors of the design that compose the elementary interactions into its output behaviors. The causal behaviors of the design, in this model, are indexed by the expected output behaviors for which they are responsible. The model aids case-based design in several ways. First, it identifies conceptual primitives for specifying the functions of designs, which are used to index the known designs stored in a case-based memory. Second, it identifies elementary types of behavior transformations and elementary types of structure modifications. Third, it provides knowledge for decomposition of the adaptation search space into smaller spaces so that the search for the needed structure modifications is localized. Fourth, it leads to a novel method for simulating the behavioral effects of structure modifications. The output and causal behaviors of the modified design, in this method, are derived by revising the output and causal behaviors of the known design. This integrative approach unifies case-based methods, associative methods, heuristic search methods, decomposition methods, and model-based methods into one architecture for adaptive design problem solving. Core portions of this approach have been implemented in an experimental design system called KRITIK.
keywords	Case Based Reasoning; Model Based Reasoning; Adaptive Design; Problem Solving
series	thesis:PhD
last changed	2003/02/12 22:37

For more results click below: