Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 206

Reformat results as: short short into frame detailed detailed into frame

_id	026a
authors	Saggio, Antonino
year	1989
title	Extrusion, Assemblage, Joint and Connection in the Workshop for Gas Production by Giuseppe Terragni
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.16.1-9.16.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.g7l
summary	Turning over the catalogues' pages of the first show of rational architecture, the strongly contrasting pictures of the model presented by Terragni remain impressive. The project for a "Workshop for Gas Production", designed by the 23 year old architect from Como, reveals the presence of an early talent and the originality of his research. Although inspired by the contemporary European architecture, the work of Terragni does not attempt to academically repeat former precedents. Although Terragni's project and many among the other exhibited works share an analogy of forms, the syntax of the Como architect appears more mature and complex. This essay and the accompanying original drawings are dedicated to the de-constructivist nature of the design operations as well as to the clarification of the messages embodied in the specific program.
keywords	Terragni, Italian Rationalist Architecture, Interactive Lesson
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6dc2
authors	Rahman, Shama
year	1989
title	The Realities of Introducing IT/CAD in Architectural and Interior Design Education: A Case Study at the Polytechnic of North London
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.1.1.-4.1.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.j5h
summary	This paper is an attempt to illustrate the realities of introducing Information Technology at a school of Architecture and Interior Design. The department, under the auspicies of the Polytechnic of North London, comprises of 520 full/part time students working towards various professional and postgraduate degrees and diplomas in Architecture and Interior Design. For the last 18 months, the department has undertaken a rapid IT/CAD implementation programme. This has involved developing a strategy, formulating resource needs and implementing teaching. The strategy is based on the concept of application of IT as a tool for design and a medium for representation, management, use and exchange of design information. A course outline has been developed suggesting what could be taught and who could be taught what, how, when and for how long. At the same time, different types of teaching methods are being experimented upon. On the basis of these factors, attempts are being made to meet resource needs for software, hardware, teaching and technical support. Various issues and problems have been brought to light e.g. overcoming cost of hardware and software, lack of teaching and technical support, finding time slots in overloaded curriculums, changing existing attitudes towards IT,etc. We have approached these problems in various ways. We liaise closely with architects' offices, and try to use student skills and expertise within the polytechnic. We try to overcome time-slot problems by joint teaching and assessment with other subjects and try to integrate IT/CAD with studio-based design projects by locating computlng facilities inside studios. This paper is a story of how we have set for ourselves a path to follow. This path is by no means rigid and will continuously change with new experiences and the demands of a volatile industry. We have only just begun.
series	eCAADe
last changed	2022/06/07 07:50

_id	268e
authors	Christiansson, Per
year	1990
title	Integration of Knowledge Based Systems and Media
source	BYGGA MED IT. Informatiosteknologi i byggprocess. November, 1990. 4 p. : ill. includes bibliography The borders between different representations and their implementation in the computer systems are not sharp. It is possible now to create models which bring about a clearer and more obvious connection between the application and the computer stored models. knowledge base / systems / media / modeling / representation / integration. 32. Christiansson, Per. 'The KBS-MEDIA Project.' MacWorld Expo Asia '89. 1989. 2 p. : ill.
summary	A short description of the KBS-MEDIA, knowledge based systems - media project advanced software
keywords	knowledge base, systems, media
series	CADline
last changed	1999/02/12 15:07

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	c0a3
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1989
title	Component Based Computer Aided Learning for Students of Architecture and Civil Engineering
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 193-208
doi	https://doi.org/10.52842/conf.acadia.1989.193
summary	The paper describes the methodology and the current efforts to develop an interdisciplinary computer aided learning system for architects and civil engineers. The system being developed incorporates a component oriented relational database with an existing interactive 3-dimensional modeling system developed in the School of Architecture and Planning at SUNY Buffalo. The software will be used in existing courses in architecture and civil engineering as a teaching aid to help students understand the complex 3-dimensional interrelationships of structural components. Initial implementation has focused on the modeling of the components and assemblies for a lowrise steel frame structure. Current implementation efforts are focusing on the capability to view connections in various ways including the ability to "explode" a connection to better understand the sequence of construction and load paths. Appropriate codes, limit states of failure and specific data will be linked to each specific component in an expert system shell so that the system can offer feedback about a student generated connection and perhaps offer other possible connections a library of standard connections. Future expansion of the system will include adding other "systems" of a building, such as mechanical, electrical, plumbing, enclosure etc., to help students visualize the integration of the various parts.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	578d
authors	Helpenstein, H. (Ed.)
year	1993
title	CAD geometry data exchange using STEP
source	Berlin: Springer-Verlag
summary	With increasing demand for data exchange in computer integrated manufacturing, a neutral connection between dissimilar systems is needed. After a few national and European attempts, a worldwide standardization of product data has been developed. Standard ISO 10303 (STEP - STandard for Exchange of Product data) produced in its first version those parts that are relevant for CAD geometrical data. A European consortium of 14 CAD vendors and users was supported by the ESPRIT programme to influence the emerging standard and implement early applications for it. Over the years 1989-1992, project CADEX (CAD geometry data EXchange) worked out application protocols as a contribution to STEP; developed a software toolkit that reads, writes, and manipulates STEP data; and, based on this toolkit, implemented data exchange processors for ten different CAD and FEA systems. This book reports the work done in project CADEX and describes all its results in detail.
series	other
last changed	2003/04/23 15:14

_id	8ca2
authors	Miller, Frank C.
year	1990
title	Form Processing Workshop: Architectural Design and Solid Modeling at MIT
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 441-455
summary	Computing impacts the preliminary architectural design process as a tool for observation and analysis, as a formal prototyping tool, and as a vehicle to generate variations of objects and assemblies. Through the use of both traditional and computing tools, the Form Processing Workshop examines the relationship between design decisions and design tools. The Workshop utilizes several software applications, with emphasis on the use of a solid modeler. This curriculum was developed with the support of MIT's Project Athena.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	0ecb
authors	Waerum, Jens and Rüdiger Kristiansen, Bjarne
year	1989
title	CAAD Education at the School of Architecture Copenhagen
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.5.1-4.5.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.q8k
summary	The establishment of Datacentret (the Data Centre) in summer 1985 was preceded by 15 years slow- moving, arduous work from the early experiments in what was then the computing laboratory under the supervision of architect Per Jacobi, author of the Danish 3D drawing system MONSTER, until 1984, when a special committee was commissioned to draw up proposals for the introduction of teaching in computing at the Architects School. In spring 1985 the school administrators decided that a central computer workshop should be set up and in cooperation with the school's institutes placed jointly in charge of instructing teachers and students, carrying out research and development within the field of architecture and taking steps to work out a curriculum of supplementary training for practising architects. With the aid of a special grant, 12 PC's were successfully acquired in the 2 years that followed, as well as a screen projector and other peripherals.
series	eCAADe
last changed	2022/06/07 07:50

_id	1e3d
authors	Bernard, Rusty
year	1989
title	USL/State Facility Planning and Control Automation Pilot Project
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 179-192
doi	https://doi.org/10.52842/conf.acadia.1989.179
summary	State supported Universities often lend a helping hand to their state by providing services which may be difficult or impossible to acquire otherwise. This presentation reviews the process of computer aided facility management with special reference to a recently completed joint venture project to fully automate Louisiana's Facility Planning and Control services.
series	ACADIA
last changed	2022/06/07 07:52

_id	0e93
authors	Af Klercker, Jonas
year	1989
title	Interactive Animation on the Macintosh II
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.5.1-9.5.6
doi	https://doi.org/10.52842/conf.ecaade.1989.x.a0t
summary	The efficiency of images in communication between humans has so far been used almost exclusively by TV and other mass medias. The costs have been too great to encourage the use of images in the financially restricted everyday practice of architecture. With a range of application programs for the Apple Macintosh II the vision has come close to reality. It is now possible to create guided walks with the chance to choose different routes and views in a model of buildings and surroundings in 256 colour graphics. The makers of these programs may not have foreseen this use for their products and that is why it takes quite a lot of effort to make all the necessary images. With some supplementary routines however, this will be made much easier. Animation can also be used to visualize different processes inside a building. We have been studying the working environment in mechanical industry. The goal of this project is to make communication possible between the workers at all levels of an organization in planning changes and has so far been very successful. The use of this technique is only limited by our imagination and funding. Some examples to be tested in the near future are "Escape at a fire", "Animation of a Dairy", "Traffic situations in a parking lot-, "CAD-working place" and others. One of the difficulties in interactive planning with users has been to come close enough to their reality. With animated images it is possible to visualize what is going to happen and what it is going to look like in a more understandable way. In education this must be a challenging possibility. Changes and processes are some of the most difficult subjects to describe and explain! The software used is a handful of individual programs which, thanks to the graphics standards of the Macintosh, can exchange data with each other.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	45e6
authors	Agger, Kristian and Lentz, Uffe (Eds.)
year	1989
title	CAAD: Education - Research and Practice [Conference Proceedings]
source	eCAADe Conference Proceedings / ISBN 87-982875-2-4 / Aarhus (Denmark) 21-23 September 1989
doi	https://doi.org/10.52842/conf.ecaade.1989
summary	In the announcement of the sixth eCAADe Conference we stated that It is held at a time where CAAD is moving into practice very fast, with heavy influence on research and education. We stated that research is directed towards the early design phases, and that education is facing the problem of mass education. In that situation much benefit can be obtained from collaboration with practice. We decided to give the conference the title “CAAD: Education - Research and Practice” to state the importance of practice as a test bench. The conference papers cover education and research in depth in many important areas and give a good overview, whereas the practical theme is more or less missing, indicating, that experience here is still modest. At the lecture material market and the exhibition the situation is opposite and shows state of art in practical use.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	a74a
authors	Asanowicz, Alexander
year	1989
title	Four Easy Questions
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.18.1-9.18.4
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x8v
summary	Should we teach CAAD? - yes, but why? Answer to this question is clear too. Question three - "when?" - on the 5, 6 and 7 term. Why so rate? - it is a compromise because "Architecture is an art" and students of architecture should know how to make a project without computers. How to teach CAAD? - we should teach haw to use professional computer programs and not programming. We must work out a new manual for architects. It should be constructed in such a way as to correspond to consecutive steps of the architectural design process.
keywords	CAAD, Manuals, Architectural Design Process
series	eCAADe
email
last changed	2022/06/07 07:50

_id	4032
authors	Barron, Christopher L.
year	1989
title	3-D Modelling
source	architectural and Engineering Systems. April, 1989. [41] -56 unevenly numbered
summary	From screen to structure, more and more AEs are finding design solutions in the third dimension. The author reviews current 3-D modeling systems, what are the expectations of the users and the developers goals
keywords	architecture, practice, drafting, modeling, systems
series	CADline
last changed	2003/06/02 13:58

_id	29d2
authors	Barsky, Brian A. and DeRose,Tony D.
year	1989
title	Geometric Continuity of Parametric Curves: Three Equivalent Characterizations
source	IEEE Computer Graphics and Applications. November, 1989. vol. 9: pp. 60-68 : ill. includes bibliography
summary	Geometric continuity of curves has received a good deal of research attention in recent years. The purpose of this article is to distill some of the important basic results into a self-contained presentation. The January 1990 issue of CG&M presents a paper that continues the discussion by offering applications of the theoretical background provided here
keywords	continuity, parametrization, curves, computational geometry, representation
series	CADline
last changed	2003/06/02 13:58

_id	4cf2
authors	Barsky, Brian A.
year	1990
title	Geometric Continuity of Parametric Curves : Constructions of Geometrically Continuous Splines
source	IEEE Computer Graphics and Applications. January, 1990. vol. 10: pp. 60-68 : ill
summary	This article is part two of an article published in November 1989. In the first article theoretical foundations for geometric continuity were presented. In this article the basic theory was applied to the construction of geometrically continuous spline curves
keywords	Bezier, curves, curved surfaces, splines, continuity, computational geometry, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	82b9
authors	Beyers, Robert and Desa, Subhas
year	1989
title	Design of Control Systems for Performance : A Constraint Mapping Approach
source	17 p. : ill Engineering Design Research Center, CMU, October, 1989. EDRC 24-10-89. includes bibliography.
summary	Simple s-plane maps are used to graphically reveal interactions of performance requirements and constraints thus providing a control system designer insight into performance trade-offs. Two well-known but powerful ideas underlie this approach: (a) the characteristic equation of an nth-order system can be fully described by the specification of n variables and (b) any dynamic performance requirement or constraint can be expressed in terms of 2n variables of which n describe the open-loop and n describe the closed-loop characteristic equations. An example illustrates the application of the approach to controller design
keywords	constraints, engineering, control, systems, design, performance
series	CADline
last changed	2003/06/02 13:58

_id	6bfa
authors	Bijl, Aart
year	1989
title	Evaluation and Representation
source	December, 1989. 11 p. : ill. includes bibliography
summary	In this paper the author will consider four key concepts: design, evaluation, models, and representation. In combination, definitions of these concepts impinge on each other and they are further conditioned by the author intention to represent design knowledge within computers. The issue of human-computer interaction then becomes critical to the usefulness of knowledge representations for designers
keywords	CAD, representation, design, evaluation
series	CADline
last changed	1999/02/12 15:07

_id	e19d
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1989
title	Capturing Designer Expertise : The CGEN System
source	18 p. : ill Pittsburgh, PA: Engineering Design Research Center, CMU, August, 1989. EDRC 18-08-89. includes bibliography.
summary	Knowledge-based systems are becoming pervasive in the computer-aided design area. For these systems to achieve satisfactory levels of performance large amounts of knowledge are necessary. However, the acquisition of knowledge is a difficult and tedious task. Automated knowledge-acquisition tools (AKAT) provide capabilities for quickly building and maintaining knowledge-bases. This paper describes the CGEN AKAT, which allows hardware designers, unfamiliar with artificial intelligence programming techniques, to deposit their expertise into a synthesis tool's knowledge-base. A set of experiments which tested CGEN's capabilities are presented. The experiments show that with CGEN hardware designers can produce high quality knowledge-bases
keywords	CAD, automation, knowledge acquisition, tools, AI, programming, knowledge base, systems, integrated circuits, hardware
series	CADline
last changed	2003/06/02 10:24

For more results click below: