Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 204

Reformat results as: short short into frame detailed detailed into frame

_id	2b8f
authors	Colajanni, Benedetto and De Grassi, Mario
year	1989
title	Inferential Mechanisms to be Employed in CAAD: The Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.c7m
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.1.1-7.1.9
summary	The paper presents an approach to the problems of architectural design aided by Artificial Intelligence techniques that can solve the difficulties related to combinatorial explosion, often encountered in the past. Three expert systems, dubbed "reasoners", capable of some elementary design work and a hypothesis for their interaction have been developed. Reasoner A has an "analogical" view of space. A notion of conflict, managed by means of fuzzy logic, has been introduced. It corresponds, in an intuitive and straightforward fashion, to the common notion of conflict or contradiction in real space as a consequence of improper overlapping of actual physical objects or of their functional pertinence. Reasoner B works on formalized models of building objects. It designs new patterns from given patterns taken as defaults. Reasoner C picks up from an archive of patterns the one which best suits a list of given goals. Design is the result of interaction between the three reasoners. Finally, the proposed schema raises questions about formal structures ("images") and about the nature of culturally-linked options ("memory") on which some preliminary considerations are made. Prototypes of the reasoners are operating at the Instituto di Edilizia of the University of Ancona, Italy.
series	eCAADe
last changed	2022/06/07 07:50

_id	a718
authors	Cuomo, Donna L. and Sharit, Joseph
year	1989
title	A Study of Human Performance in Computer-Aided Architectural Design
source	International Journal of Human-Computer Interaction. 1989. vol. 1: pp. 69-107 : ill. includes bibliography
summary	This paper describes the development and application of a cognitively-based performance methodology for assessing human performance on computer-aided architectural design (CAAD) tasks. Two CAAD tasks were employed that were hypothesized to be different in terms of the underlying cognitive processes required for these tasks to be performed. Methods of manipulating task complexity within each of these tasks were then developed. Six architectural graduate students were trained on a commercially available CAAD system. Each student performed the two experimental design tasks at one of three levels of complexity. The data collected included protocols, video recordings of the computer screen, and an interactive script (time-stamped record of every command input and the computers textual response). Performance measures and methods of analysis were developed which reflected the cognitive processes used by the human during design (including problem- solving techniques, planning times, heuristics employed, etc.) and the role of the computer as a design aid. The analysis techniques used included graphical techniques, Markov process analysis, protocol analysis, and error classification and analysis. The results of the study indicated that some measures more directly reflected human design activity while others more directly reflected the efficiency of interaction between the computer and the human. The discussion of the results focuses primarily on the usefulness of the various measures comprising the performance methodology, the usefulness of the tasks employed including methods for manipulating task complexity, and the effectiveness of this system as well as CAAD systems in general for aiding human design processes
keywords	protocol analysis, problem solving, planning, CAD, design process, performance, architecture
series	CADline
last changed	2003/06/02 13:58

_id	a8b7
authors	De Grassi, Mario and Di Manzo, Mauro
year	1989
title	The Design of Buildings as Changes of Known Solutions: A Model for “Reasoner B” ; Reasoner B" in the Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.u3h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.3.1-7.3.9
summary	The paper presents a study aimed at the modelization of a design operation of perturbation of an architectural framework in order to comply with a series of given design specifications. A formalized representation of the building object is assumed, Artificial Intelligence techniques are adopted to work on it. It is assumed that the computer carries out deformations starting from one of these structures in order to attain to a solution consistent with project specifications. A description of the structures employed for the representation of the building body (matroids) is firstly proposed. A planning theme is then assumed, as an example, whose main feature is to maintain the outer perimeter of a dwelling, to change its internal distribution in such a way as to resemble as closely as possible to the original and yet meaningfully alter its typology.
series	eCAADe
type	normal paper
last changed	2022/06/07 07:50

_id	0f73
authors	Ervin, Stephen M.
year	1990
title	Designing with Diagrams: A Role for Computing in Design Education and Exploration
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 107-122
summary	Environmental designers, design educators and design students using computers are a constituency with a set of requirements for database structure and flexibility, for knowledge representation and inference mechanisms, and for both graphical and non-graphical operations, that are now articulatable and to-date largely unmet. This is especially so in the area called 'preliminary' or 'schematic' design, where our requirements are related to, but different from, those of our colleagues in mechanical and electrical engineering, whose needs have dominated the notable developments in this area. One manifestation of these needs is in the peculiar form of graphics called diagrams , and the ways in which environmental designers (architects, landscape architects., urban designers) use them. Our diagrams are both similar to and different from structural, circuit, or logical diagrams in important ways. These similarities and differences yield basic insights into designing and design knowledge, and provide guidance for some necessary steps in the development of the next generation of CAD systems. Diagrams as a form of knowledge representation have received little scrutiny in the literature of graphic representation and computer graphics. In the following sections I present an overview of the theoretical basis for distinguishing and using diagrams; examine some of the computational requirements for a system of computer-aided diagramming; describe a prototype implementation called CBD (Constraint Based Diagrammer) and illustrate one example of its use; and speculate on the implications and potential applications of these ideas in computer-aided design education.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	801b
authors	Cocchioni, Cristina and Mecca, Saverio
year	1989
title	Utilization of Rules for Modular Coordination in Relational Models to Be Employed In CAAD
doi	https://doi.org/10.52842/conf.ecaade.1989.x.p3f
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.5.1-7.5.11
summary	The paper deals with the structure of experimental software to be used for the interactive relational database and a graphic package. Proposed is the development that considers the main implications of a modular space grid for the project´s development already from the stage of preliminary wire-frame design.
series	eCAADe
last changed	2022/06/07 07:50

_id	84f6
authors	Ferrari, Carlo and Naticchia, Berardo
year	1989
title	Definition of Spatial Elements of the Building System: “Reasoner A” in the Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.p5w
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.2.1-7.2.10
summary	This paper tackles the problem of the functional and morphological definition of elementary spaces (in relation to the overall definition of the building object) through the study and the modelization of the designer's knowledge and of the cognitive processes which use it. An interactive automatic system which solves the problem of the placing of objects within a predefined environment is then described. This is the first element in a more general system which is meant as an intelligent aid to building design.
series	eCAADe
last changed	2022/06/07 07:50

_id	ec09
authors	Lemma, Massimo and Fornarelli, Andrea
year	1989
title	Decisional Problems in the Building Process. Contextual Evaluation of Performance and Cost Parameters: “Reasoner C" in the Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.r8n
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.4.1-7.4.8
summary	The study contains the provisional results of investigations currently in progress on the application of CAD and Design Management techniques to building design. The research aims at showing the feasibility of decisional procedures and economic analyses in current design practice, even referring to rather complex buildings, by exploring the possibility to know in full detail the technical and economic feasibility of a project already at its early stages.
series	eCAADe
last changed	2022/06/07 07:50

_id	69b2
authors	McCartney, Allan
year	1989
title	Terrain Modelling Using AutoCad
doi	https://doi.org/10.52842/conf.ecaade.1989.x.w0q
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.4.1-9.4.8
summary	This paper describes the use of a widely-used CAD drafting system, in conjunction with a specialist contouring package, to provide a low-cost facility for terrain modelling, volumetric calculation, and landscape visualisation. One such system is in use at the Department of Architecture & Landscape, Manchester Polytechnic, to enable graduate students on the Landscape Design course to explore the visual and quantitative implications of design proposals, particularly when related to large scale landscape modelling. It is also in commercial use by professional surveyors, waste management contractors, local authorities etc. In addition to AutoCAD, two further packages are employed, one to recover coordinates from existing AutoCAD drawings, and the other to generate contours and volumes from those, or other coordinate data files. The first known as BADGER (Basic AutoCAD Data Grabber & Exchange Routine), and the other is SURVCAD CONTOURS - a contouring program capable of converting large coordinate data files (2500 + points) to a 2.5D terrain model.
keywords	Terrain Modelling, Landscape Visualisation, CAD, Volumetrics
series	eCAADe
last changed	2022/06/07 07:50

_id	e91f
authors	Mitchell, W.J., Liggett, R.S. and Tan, M.
year	1990
title	Top-Down Knowledge-Based Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 137-148
summary	Traditional computer drafting systems and three- dimensional geometric modeling systems work in bottom-up fashion. They provide a range of graphic primitives, such as vectors, arcs, and splines, together with operators for inserting, deleting, combining, and transforming instances of these. Thus they are conceptually very similar to word processors, with the difference that they operate on two- dimensional or three-dimensional patterns of graphic primitives rather than one-dimensional strings of characters. This sort of system is effective for input and editing of drawings or models that represent existing designs, but provides little more help than a pencil when you want to construct from scratch a drawing of some complex object such as a human figure, an automobile, or a classical column: you must depend on your own knowledge of what the pieces are and how to shape them and put them together. If you already know how to draw something then a computer drafting system will help you to do so efficiently, but if you do not know how to begin, or how to develop and refine the drawing, then the efficiency that you gain is of little practical consequence. And accelerated performance, flashier color graphics, or futuristic three-dimensional modes of interaction will not help with this problem at all. By contrast, experienced expert graphic artists and designers usually work in top-down fashion-beginning with a very schematic sketch of the whole object, then refining this, in step-by-step fashion, till the requisite level of precision and completeness is reached. For example, a figure drawing might begin as a "stick figure" schema showing lengths and angles of limbs, then be developed to show the general blocking of masses, and finally be resolved down to the finest details of contour and surface. Similarly, an architectural drawing might begin as a parti showing just a skeleton of construction lines, then be developed into a single-line floor plan, then a plan showing accurate wall thicknesses and openings, and finally a fully developed and detailed drawing.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c1e2
authors	Norman, Richard B.
year	1990
title	Color Contrast and CAAD: The Seven Color Contrasts of Johannes Itten
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 469-478
summary	Computer-aided architectural design is design with color - the monitor of a CAAD system is a display of color, a place where images are produced by color manipulation. The success of these images can be judged by the ability of the colors selected to communicate graphic ideas and to convey graphic information. Color as a visual phenomena intrigued the impressionist painters at the end of the nineteenth century; it was the focus of much attention at the Bauhaus in Weimar Germany. When Johannes Itten was appointed as a Master of Form at the Bauhaus in 1919, he developed "an aesthetic color theory originating in the experience and intuition of a painter". In his definitive work, Itten postulates seven ways to communicate visual information with color. "Each is unique in character and artistic value, in visual, expressive and symbolic effect, and together they constitute the fundamental resource of color design". These seven contrasts provide a lexicon of the methods by which computer images convey graphic information. The colors which form a computer image can be simply manipulated to illustrate these contrasts; today's computers make color manipulation a very simple matter. This paper is composed of short essays about each of these contrasts and how they can guide the selection of appropriate colors to convey visual intent on a picture tube. Considered together the contrasts of Itten provide a fundamental resource for electronic graphic communication.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	45ea
authors	Oliva, Caterina
year	1989
title	Management System about Building Retrofitting
doi	https://doi.org/10.52842/conf.ecaade.1989.x.l8h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.10.1-9.10.6
summary	The system will be constituted by a central core (a "super expert") which co-ordinates a data-base, a thermal building behaviour simulating software and the "single expert system" that evaluate the damages of the buildings. One of these "single expert system" is worked out at the University "La Sapienza" of Rome. Its knowledge domains applied to enquiring into the causes of dampnes in building structures. Such a system will be able to simulate the knowledge required in the various stages of the building process, aiding the design process of building retrofitting.
keywords	Building Retrofitting, Knowledge, Dampness
series	eCAADe
last changed	2022/06/07 07:50

_id	29b6
authors	Oxman, Rivka
year	1990
title	Architectural Knowledge Structures as "Design Shells": A Knowledge-Based View of Design and CAAD Education
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 187-199
summary	The concept of a knowledge based design shell is proposed as a basis for teaching design. The significance of the concept of design shell is discussed with respect to formalization, implementation, application and operation. GPRS-a generative prototype refinement design shell-is proposed, defined and elaborated. A plan type is introduced as one significant kind of structure of knowledge in architectural design is introduced. A method for representing syntactic and the semantic content to be used in design refinement is proposed. The method exploits the characteristics of both rules and frames, and integrates them in a prototype-based design system. This is demonstrated in a system called PRODS. Finally, the significance of such an approach in teaching is discussed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ce38
authors	Paoluzzi, Alberto and Sansoni, Claudio
year	1989
title	A Programming Language for Architectural Symbolic Modeling
doi	https://doi.org/10.52842/conf.ecaade.1989.x.r3e
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.4.1-8.4.16
summary	In this paper a software project supporting architectural design is outlined. Such a project aims to develop the new design language PLASM (a Programming Language for Architectural Symbolic Modeling), which is planned to be a very high-level, user-oriented language, belonging to the class of constraint languages. The language PLASM will support a small set of abstract data types which are significant in various outstanding problems of architectural design, and will offer both procedural features and non-procedural constraints satisfaction. It will allow the designer to make use of a large set of computing tools in any phase of architectural design, in order to explore a wider set of design solutions. Customizable evaluation functions will be available in the language. The execution of a PLASM program may result either in generating or in updating a semantic network over a set of data objects solving the geometric problem under consideration. The proposed language will support both abstract data types significant in the design domain, and tools performing automatized data generation and transformations between different data types. The modification of any object in such a system, both performed by editing a daemon program and/or by interactively modifying a data object, will result in the immediate propagation of changes into the problem network, by activating a message passing mechanism.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6743
authors	Retik, A
year	1989
title	Computer-Aided Design of Precast Building System
source	Proceedings of the International Conference on CAD/CAM and AMT. December, 1989. pp. 1-5 : some ill. includes bibliography
summary	The paper describes an expert system for computerized design of precast building components for a given architectural solution. The system receives the layouts and evaluations of the building as input, indicates the location of structural supports, breaks down the floors and walls into the elements to be prefabricated, and finally generates detailed production drawings for each element. Design stages are governed by the specific features of the prefabrications system to be employed. Design alternatives are also evaluated in the course of the process. The paper reviews the principles of the system and the particular features of the computer program employed for this purpose
keywords	building, layout, floor plans, structures, construction, design, details, expert systems, prefabrication
series	CADline
last changed	1999/02/12 15:09

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	8d9d
authors	Tascini, Guido and Puliti, Paolo
year	1989
title	Automatic Recognition of Graphic Documentation in Building Design
doi	https://doi.org/10.52842/conf.ecaade.1989.x.l6t
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.6.1-7.6.6
summary	Automatic image recognition by means of Artificial Intelligence techniques poses some unsolved problems but it can be viable in technical drawing because standards allow the problem to be managed in terms of knowledge. The paper deals with the feasibility of a knowledge-based design. A semantic network is employed to model knowledge and an expectation-driven recognition strategy is used.
series	eCAADe
last changed	2022/06/07 07:50

_id	4825
authors	Van Bakel, A.P.M. and Daru, R.
year	1993
title	CAADidactics - An Instrument for Tuning CAAD Systems to Student Styles
doi	https://doi.org/10.52842/conf.ecaade.1993.x.j4l
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper discusses the features of an instrument for tuning CAAD systems to student styles implemented in the authoring shell Authorware Professional (1989). This application enables students and teachers to evaluate the design progress. It also makes it possible to assess their preferences with respect to their working styles (Subject style) and style preferences in terms of the product style (Object style) in different stages of the design curriculum. The availability of this information enables teachers to adapt their didactical approach to their students. The progress they make during design education can be evaluated by looking at the process documentation as well as by looking at the product documentation generated by the application. This makes the students conscious of their own preferences and affinities. It is up to the student and the teacher whether they want to enhance or compensate those preoccupations. The documented information of previous design sessions can also be used as a guide system for further development and adaptations in styles of design and designing. In the design studio this style knowledge can also be used to establish adequate and workable design teams. Some of the features discussed in this paper are already implemented in a small prototype application. The prototype application will be presented and discussed. Other features will be implemented in the near future.
series	eCAADe
last changed	2022/06/07 07:50

_id	2bb6
authors	Van Bakergem, Dave
year	1990
title	Image Collections in the Design Studio
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 261-271
summary	No matter what the medium, architects are constantly using images in all aspects of design thinking. Whether it is the perception of the environment, an image in the mind's eye, an abstract drawing or a photographic record, designers use images to conceive of, and manipulate their design ideas. Managing these image collections occurs at a variety of levels in the creative process and is dependent on the type of image that is called upon for reference. The most basic example would be the image collection residing in the mind's memory which is a result of the designer’s world experiences and the relative impressiveness of each experience. Clearly, personal memory plays a significant role in the use of imagery in design, but it is unreliable and can be abstracted in uncontrollable ways. The sketchbook and later photographic collections of the grand tour were the beginnings of efforts to manage and utilize image collections as an aid to drawing and thinking about design. Now the capacity to use electronic means of creating, altering, storing, and retrieving images will enable designers to effectively use large image collections in ways that have not been possible before. This paper describes current work at the School of Architecture at Washington University in a graduate design studio. The students use a powerful 3D modeling CAD system (HOKDraw) to design and present their studio projects. In addition, we are experimenting with an image storage and retrieval system which is directly linked to the CAD model through a relational database (INGRES). Access to the database and images is instantly available through the command language and graphic display. The CAD model in effect becomes a 3D menu to an extensive image database stored on an optical memory disc recorder. Several collections are available to the studio members: the library's slide collection which relates to the studio project, specific photographs and drawings of the project site, and personal image collections stored by individuals for their own reference. The commonly accessible images are basically background material and images collected by the students to document the site, urban context and building typology. The personal images collections are any images (drawings, photographs, published images, CAD images) created or collected by the students for purposes of informing their design thinking. This work relates to the use of precedents and typology in architecture as a point of departure as well as in development of design ideas.
series	CAAD Futures
last changed	1999/04/03 17:58

For more results click below: