Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 205

Reformat results as: short short into frame detailed detailed into frame

_id	acadia06_079
id	acadia06_079
authors	Kumar, Shilpi
year	2006
title	Architecture and Industrial Design A Convergent Process for Design
doi	https://doi.org/10.52842/conf.acadia.2006.079
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 79-94
summary	The use of technology has grown with the way design professions have evolved over time. Changing needs, desires of comfort, and perceptions of the consumers have led to a distinct improvement in the design of both product and architecture. The use of the digital media and emerging technologies has brought a dramatic change to the design process allowing us to view, feel, and mould a virtual object at every stage of design, development, and engineering. Change is often quick and easy since a virtual product does not inherently carry the biases of its physical counterpart. In order to communicate ideas across the team, digital processes are also used to bring together opinions, experiences, and perspectives. These methods encourage decision making based on information rather than prejudice or instinct. Thus, digital exchanges (technology) impact firm strategies at three levels: product, process, and administrative or support activities (Adler 1989).Digital tools for design exchange in Industrial Design (ID) began much earlier than many other professions. The profession of Architecture is also slowly moving to a similar model with digital exchange finding increasing prevalence in drawing, modeling, performance simulation, design collaboration, construction management, and building fabrication. The biggest problem is the disintegrated use of technology in the architectural profession without a strategy toward streamlining the design process from conception to fabrication. In this paper we investigate how the use of technology has evolved in the professions of Industrial Design and Architecture comparatively in their product, process, and support activities. Further, we will present a set of guidelines that will help architects in the convergence of design process, helping in a more efficient work flow with a strategic use of digital technology.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	2db4
authors	Schmitt, Gerhard
year	1992
title	Design for Performance
source	New York: John Wiley & Sons, 1992. pp. 83-100 : ill. includes bibliography Design for performance describes a generative approach toward fulfilling qualitative and quantitative design requirements based on specification and existing cases. The term design applies to the architectural domain: the term performance includes the aesthetic, quantitative, and qualitative behavior of an artifact. In achieving architectural quality while adhering to measurable criteria, design for performance has representational, computational, and practical advantages over traditional methods, in particular over post-facto single- and multicriteria analysis and evaluation. In this paper a proposal for a working model and a partial implementation of this model are described. architecture / evaluation / performance / synthesis / design / representation / prediction / integration. Ô h)000*°° ÔŒ21. Schneekloth, Lynda H., Rajendra K. Jain and Gary E. Day. 'Wind Study of Pedestrian Environments.' February, 1989. 30, [2] p. : ill. includes bibliography and index.
summary	This report summarizes Part 1 of the research on wind conditions affecting pedestrian environments for the State University of New York at Buffalo. Part 1 reports on existing conditions in the main part of the North Campus in Amherst. Procedures and methods are outlined, the profile of the current situation reported, and a special study on the proposed Natural Science and Math Building are included
keywords	architecture, research, evaluation, analysis, simulation, hardware
series	CADline
last changed	1999/02/12 15:09

_id	a718
authors	Cuomo, Donna L. and Sharit, Joseph
year	1989
title	A Study of Human Performance in Computer-Aided Architectural Design
source	International Journal of Human-Computer Interaction. 1989. vol. 1: pp. 69-107 : ill. includes bibliography
summary	This paper describes the development and application of a cognitively-based performance methodology for assessing human performance on computer-aided architectural design (CAAD) tasks. Two CAAD tasks were employed that were hypothesized to be different in terms of the underlying cognitive processes required for these tasks to be performed. Methods of manipulating task complexity within each of these tasks were then developed. Six architectural graduate students were trained on a commercially available CAAD system. Each student performed the two experimental design tasks at one of three levels of complexity. The data collected included protocols, video recordings of the computer screen, and an interactive script (time-stamped record of every command input and the computers textual response). Performance measures and methods of analysis were developed which reflected the cognitive processes used by the human during design (including problem- solving techniques, planning times, heuristics employed, etc.) and the role of the computer as a design aid. The analysis techniques used included graphical techniques, Markov process analysis, protocol analysis, and error classification and analysis. The results of the study indicated that some measures more directly reflected human design activity while others more directly reflected the efficiency of interaction between the computer and the human. The discussion of the results focuses primarily on the usefulness of the various measures comprising the performance methodology, the usefulness of the tasks employed including methods for manipulating task complexity, and the effectiveness of this system as well as CAAD systems in general for aiding human design processes
keywords	protocol analysis, problem solving, planning, CAD, design process, performance, architecture
series	CADline
last changed	2003/06/02 13:58

_id	10a5
authors	Edwards, D.M. and Hardman, L.
year	1989
title	Lost In Hyperspace: Cognitive Mapping and Navigation in a Hypertext Environment, Chapter 7
source	Hypertext: Theory Into Practice, Edited by McAleese, Ray., Ablex Publishing Corporation, New Jersey
summary	This paper describes an experiment which looks at how the users of a hypertext document cognitively represent its layout. A document was formed into three different hypertext styles and was presented to the readers, they were then asked a series of questions about information contained in the hypertexts. The way the users found the answers and the time taken was recorded, they were also ask to lay out cards, with reduced versions of the screen on them, on a board and as they thought them to be arranged in the document and also to draw any connecting hypertext links they thought existed between these screens. The users selected for this experiment consisted of 27 university undergraduates 15 male and 12 female with a mean age of 20.5 years with little or no computing experience. They were each assigned one of the three hypertext methods and their performance was recorded. The three methods consisted of a hierarchical, a mixed and an index based method.
series	other
last changed	2003/04/23 15:14

_id	1a4e
authors	Goel, Ashok Kumar
year	1989
title	Integration of case-based reasoning and model-based reasoning for adaptive design problem solving
source	Ohio State University
summary	In the case-based approach to design, a novel problem is solved by adapting a design known to solve a related problem. Adapting a known design to solve a related problem by the commonly used methods of heuristic association and search, however, can be computationally expensive if the adaptation search space is not small. The adaptation space, then, needs to be decomposed into smaller and simpler spaces that can be searched more efficiently and effectively. The knowledge for decomposing the adaptation search space can be represented as a behavior-structure model that specifies how the structure of the known design results in its output behaviors. This research investigates the use of such behavior-structure models for adapting the designs of physical devices. Comprehension of how the output behaviors of a design arise from its structure is represented as a behavioral component-substance model for the design. The model explicitly specifies (i) the expected output behaviors of the design including its functions, (ii) the elementary structural and behavioral interactions between components and substances constituting the structure of the design, and (iii) the internal causal behaviors of the design that compose the elementary interactions into its output behaviors. The causal behaviors of the design, in this model, are indexed by the expected output behaviors for which they are responsible. The model aids case-based design in several ways. First, it identifies conceptual primitives for specifying the functions of designs, which are used to index the known designs stored in a case-based memory. Second, it identifies elementary types of behavior transformations and elementary types of structure modifications. Third, it provides knowledge for decomposition of the adaptation search space into smaller spaces so that the search for the needed structure modifications is localized. Fourth, it leads to a novel method for simulating the behavioral effects of structure modifications. The output and causal behaviors of the modified design, in this method, are derived by revising the output and causal behaviors of the known design. This integrative approach unifies case-based methods, associative methods, heuristic search methods, decomposition methods, and model-based methods into one architecture for adaptive design problem solving. Core portions of this approach have been implemented in an experimental design system called KRITIK.
keywords	Case Based Reasoning; Model Based Reasoning; Adaptive Design; Problem Solving
series	thesis:PhD
last changed	2003/02/12 22:37

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	cf15
authors	Penttilä, Hannu
year	1989
title	Computer Aided Building Modeling
doi	https://doi.org/10.52842/conf.ecaade.1989.x.d2h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 3.2.1-3.2.11
summary	The subject of computer-aided building modeling is often discussed in various contexts, sometimes without clear explanation of what is modelled. Usually modeling refers to 3-dimensional geometric modeling, but nowadays also conceptual modeling and mathematical simulation aspects are more and more evident. Building modeling should though be considered more widely than just plain geometric visualization. This paper establishes one common framework for discussion about different building modeling viewpoints arranging discipline viewpoints, approach methods, existing standards and application tools within one context. Although several viewpoints are declared conceptual building modeling is regarded the main emphasis of this paper, since it definitely will be one of the key issues in developing methods and tools for computer integrated construction (CIC) in the future.
keywords	Building Modeling, Building Information and Data, Product Modeling, Conceptual Modeling, Geometric Modeling, Standards, Application Programs
series	eCAADe
email
more	http://www.tut.fi/~penttila/index.html
last changed	2022/06/07 07:50

_id	maver_065
id	maver_065
authors	Clarke, J. and Maver, T.W.
year	1989
title	Advanced Design Tools for Energy Conscious Design
source	Paper to Royal Society
summary	This paper is concerned with building energy simulation and the prospects for the delivery of a new generation of simulation based, valid and easy to use design tools to the building construction industry. The issues relating to design tools development and use are discussed and the present state-of-the-art is described. Some medium to long term developments are then identified, including an intelligent front end and the notion of an advanced machine environment for the construction and maintenance of future models concerned with building energy and environment. The mechanisms for technology transfer are identified and experiences recounted of the first two years operation of an innovatory energy design advisory service. The paper finishes with a look to the future of the information technologies in building design.
series	other
email
last changed	2003/09/03 15:01

_id	e91f
authors	Mitchell, W.J., Liggett, R.S. and Tan, M.
year	1990
title	Top-Down Knowledge-Based Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 137-148
summary	Traditional computer drafting systems and three- dimensional geometric modeling systems work in bottom-up fashion. They provide a range of graphic primitives, such as vectors, arcs, and splines, together with operators for inserting, deleting, combining, and transforming instances of these. Thus they are conceptually very similar to word processors, with the difference that they operate on two- dimensional or three-dimensional patterns of graphic primitives rather than one-dimensional strings of characters. This sort of system is effective for input and editing of drawings or models that represent existing designs, but provides little more help than a pencil when you want to construct from scratch a drawing of some complex object such as a human figure, an automobile, or a classical column: you must depend on your own knowledge of what the pieces are and how to shape them and put them together. If you already know how to draw something then a computer drafting system will help you to do so efficiently, but if you do not know how to begin, or how to develop and refine the drawing, then the efficiency that you gain is of little practical consequence. And accelerated performance, flashier color graphics, or futuristic three-dimensional modes of interaction will not help with this problem at all. By contrast, experienced expert graphic artists and designers usually work in top-down fashion-beginning with a very schematic sketch of the whole object, then refining this, in step-by-step fashion, till the requisite level of precision and completeness is reached. For example, a figure drawing might begin as a "stick figure" schema showing lengths and angles of limbs, then be developed to show the general blocking of masses, and finally be resolved down to the finest details of contour and surface. Similarly, an architectural drawing might begin as a parti showing just a skeleton of construction lines, then be developed into a single-line floor plan, then a plan showing accurate wall thicknesses and openings, and finally a fully developed and detailed drawing.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	0155
authors	Sastre, R., Puigdomènech, J., Jorge, J. and Cusido, A.
year	1989
title	A Comprehensive Approach to the Tensile Structures Design
doi	https://doi.org/10.52842/conf.ecaade.1989.x.l6e
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.7.1-9.7.8
summary	We present an integrated set of programs as CAD-tools for the design of shapes, evaluation of stress field and displacements of tensile membrane structures as well as a way to find out their surface patterns. In early times simulation of physical small models has been used to obtain a phenomenological view rather than quantitative information about these structures. A progressive way has been thought to make a comprehensive an practical approach to this kind of structure, characterized by its ability to offer displacements of long range. We propose like a first steep a rough simulation through elastic member models or elastic-surface models. An iterative process starts, based on visualizations through different peripheric devices (screened and plottered graphic outputs). This first steep ends by the formulation of an optimum geometric performances of the structure. The resulting geometry serves like a source structure for a more accurate calculus achieved by the Finite Element Method. Discretization of the continues structure is carried out in a network of tiny triangular elements. Finally, 3-D realism techniques has been used to represent the form adopted or stress field calculated or both at the same time, by an adequate use of the color attributes of the finite elements.
keywords	Tensile structures, Finite Elements
series	eCAADe
last changed	2022/06/07 07:50

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ecaade2015_38
id	ecaade2015_38
authors	Stavrakantonaki, Marina
year	2015
title	A Framework for Input Data Processing During Building Energy Model Calibration. A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2015.1.625
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 625-634
summary	Key parameter of a reasoning process supporting real time performance is the use of active heuristics that facilitate the achievement of goals in a timely manner (Dodiawala et al. 1989). A real time approach should incorporate speed, timeliness and adaptation during the execution of tasks. Speed and efficient knowledge processing are addressed for the solution of complex building engineering problems, such as the calibration of Building Energy Models (BEM) to the actual performance data. During retrofit projects, calibrated BEM models aid the design process, and provide a solid base for performative assessments. Despite the demand for building performance evaluations, BEM calibration remains a work-intensive task (Lam et al. 2014). This study proposes a time efficient framework for BEM calibration input data management based on the methodology of a blackboard artificial intelligence knowledge processing system. The resulting model was used for sequential data mining for the energy assessment during the renovation of a commercial building.
wos	WOS:000372317300068
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e440bdd6-7021-11e5-bdb0-00190f04dc4c
last changed	2022/06/07 07:56

_id	abdb
authors	Wood, D.J., Brown, A.G.P. and Brown, G.Z.
year	1989
title	A Sunlight Design Tool
doi	https://doi.org/10.52842/conf.ecaade.1989.x.q6i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.3.1-9.3.7
summary	Computer-based techniques for Environmental design tend to be analytical. They are aimed at the engineer who takes a previously designed building and then analyses the environmental performance of the building so as to be able to give performance requirements for servicing plant. Thus the building has been designed by an architect using experience and some broad background knowledge of environmental performance, but it is usually not until the analysis stage is reached that the building's environmental performance is accurately assessed. A sunlight design program (application) has been written to address this problem. This program is aimed at the designer and should allow them to assess quickly the sunlight characteristics of' their building. The intention has been to produce a tool which is easy to understand and use: a tool which is interactive and in which data can be changed easily. Thus the tool can be used: to check the effect of design changes on sunlight performance. The tool is meant to the both an aid to design itself and to the understanding of the environmental performance of buildings. This paper describes the application and the use of it by architectural students. We describe the application, assess it and evaluate its educational value by comparing students' estimations of sunlight performance in their own buildings with performance predicted by it. We look at how students interact with the program to modify their design in response to this interaction and report on their evaluation of the application during a controlled exercise.
keywords	Design Tools, Sunlight, Design Education
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2786
authors	Woodwark, J.R.
year	1989
title	Splitting Set-Theoretic Solid Models into Connected Components
source	10 p. : ill. Winchester: IBM UK Scientific Center, IBM United Kingdom Laboratories Limited, June, 1989. IBM UKSC 210. includes bibliography In general, there is no way to tell how many pieces (connected components) a set-theoretic (CSG) solid model represents, except via conversion to a boundary model. Recent work on the elimination of redundant primitives has been linked with techniques for identifying connected components in quad-trees and oct-trees into a strategy to attack this problem. Some success has been achieved, and an experimental Prolog program, working in two dimensions, that finds connected components and determines the set-theoretic representation of each component, is reported, and further developments proposed. CSG / quadtree / octree / primitives / algorithms. 43. Woodwark, J. R. and Quinlan K. M. 'Reducing the Effect of Complexity on Volume Model Evaluation.' Computer Aided Design. April, 1982. pp. 89-95 : ill. includes bibliography.
summary	A major problem with volume modelling systems is that processing times may increase with model complexity in a worse than linear fashion. The authors have addressed this problem, for picture generation, by repeatedly dividing the space occupied by a model, and evaluating the sub-models created only when they meet a criterion of simplicity. Hidden surface elimination has been integrated with evaluation, in such a way that major portions of the model which are not visible are never evaluated. An example demonstrates a better than linear relationship between model complexity and computation time, and also shows the effect of picture complexity on the performance of the process
keywords	CAD, computational geometry, solid modeling, geometric modeling, algorithms, hidden surfaces, CSG
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	8775
authors	Cigolle, Mark and Coleman, Kim
year	1990
title	Computer Integrated Design: Transformation as Process
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary	To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	b66a
authors	Dvorak, Robert W.
year	1989
title	CAD Tools for Systems Theory and Bottom Up Design
doi	https://doi.org/10.52842/conf.acadia.1989.209
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 209-226
summary	The use of CAD is investigated in the teaching of systems theory to a fourth year group of design students. A comparison is made between the CAD group using MacArchitrion and a non-CAD group using traditional design methods. The paper includes a discussion of the meaning of systems design theories, relates the CAD and non-CAD student design methods and illustrates the results. It also includes recommendations for improvements so the computer can become more effective in this type of design teaching. Finally, it concludes with recommendations from the students at the end of the semester project. The basic premise for the CAD design group is that computers should encourage students to understand and use systems design theory.
series	ACADIA
last changed	2022/06/07 07:55

_id	25de
authors	Ervamaa, Pekka
year	1993
title	Integrated Visualization
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 157-160
summary	The Video and Multimedia studio at VTT, Technical Research Centre of Finland, started with endoscopy photography of scale models. Video recordings has been made since 1985 and computer graphic since 1989. New visualization methods and techniques has been taken into use as a part of research projects, but mainly we have been working with clients commissions only. Theoretical background for the visualizations is strong. Research professor Hilkka Lehtonen has published several papers concerning the theory of visualization in urban planning. This studio is the only professional level video unit at Technical Research Centre, which is a large polytechnic research unit. We produce video tapes for many other research units. All kind of integrated methods of visualization are useful in these video productions, too.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

For more results click below: