Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 88

Reformat results as: short short into frame detailed detailed into frame

_id	0e93
authors	Af Klercker, Jonas
year	1989
title	Interactive Animation on the Macintosh II
doi	https://doi.org/10.52842/conf.ecaade.1989.x.a0t
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.5.1-9.5.6
summary	The efficiency of images in communication between humans has so far been used almost exclusively by TV and other mass medias. The costs have been too great to encourage the use of images in the financially restricted everyday practice of architecture. With a range of application programs for the Apple Macintosh II the vision has come close to reality. It is now possible to create guided walks with the chance to choose different routes and views in a model of buildings and surroundings in 256 colour graphics. The makers of these programs may not have foreseen this use for their products and that is why it takes quite a lot of effort to make all the necessary images. With some supplementary routines however, this will be made much easier. Animation can also be used to visualize different processes inside a building. We have been studying the working environment in mechanical industry. The goal of this project is to make communication possible between the workers at all levels of an organization in planning changes and has so far been very successful. The use of this technique is only limited by our imagination and funding. Some examples to be tested in the near future are "Escape at a fire", "Animation of a Dairy", "Traffic situations in a parking lot-, "CAD-working place" and others. One of the difficulties in interactive planning with users has been to come close enough to their reality. With animated images it is possible to visualize what is going to happen and what it is going to look like in a more understandable way. In education this must be a challenging possibility. Changes and processes are some of the most difficult subjects to describe and explain! The software used is a handful of individual programs which, thanks to the graphics standards of the Macintosh, can exchange data with each other.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	6b83
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	1989
title	Towards a New Generation of Computer Assistants for Architectural Design: An Existing Scenario
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f9h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.3.1.8.3.10
summary	The context in which designers operate is becoming more and more complex, owing to the large number of codes, new materials, technologies and professional figures; new instruments are needed, therefore, to support and verify design activity. The results obtained in the first years of 'computer era' were barely sufficient. The hardware and software available today is capable of producing a new generation of CAD systems which can aid the designer in the process of conceiving and defining building objects. At the CAD Laboratory in the Department of Building and Environmental Control Techniques at the 'La Sapienza' University of Rome, research is being carried out with the aim of defining a new kind of Knowledge-based assistant for architectural design. To this purpose a partnership has been established whit a private firm called CARTESIANA, whose partners are software houses, designing and building associations.
keywords	Knowledge-Based Architectural Design
series	eCAADe
last changed	2022/06/07 07:50

_id	600f
authors	Cortes, Chaves Camila
year	1989
title	Design Software of the '90s
source	Architectural and Engineering Systems. July, 1989. vol. 5: pp. 30
summary	The design firm of the '90s will have the ability to use the right tool for the right task, permitting tailored resources to be used more effectively. This mean portable, modular and multiuser software running on machines specifically designed for a particular environment with the option to tap other sources. Designers will enter the 21st century using integrated design knowledge-based support systems with knowledge-based inferencing systems, information management systems for text and graphics, a CAD/modeling package, and a flexible user interface with speech recognition, eye tracking and manual input device. Some of these are discussed in this article
keywords	practice, construction, systems, software, integration
series	CADline
last changed	1999/02/12 15:07

_id	a235
authors	Danahy, John W.
year	1990
title	Irises in a Landscape: An Experiment in Dynamic Interaction and Teaching Design Studio
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 363-376
summary	The capacity of most computer-aided design systems is inadequate to represent landscape architectural ideas and compute landscape scenes quickly. As part of our teaching agenda, we decided to write software for the Silicon Graphics Iris workstations to tackle this problem directly. This paper begins with a discussion of our concerns about the use of CAD tools in the representation of landscape architectural space. Secondly, we discuss the approach that Toronto takes to computing and teaching with particular emphasis on the use of computers to support an integrated representational work environment. Finally, a fourth-year design studio that used our software is reviewed. Static illustrations of the system are presented here, although there is a videotape that demonstrates the dynamic nature of the system.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	778e
authors	Gann, D.
year	1994
title	Archaeological Site Reconstruction With AutoDesk's 3D Studio
source	CSA Newsletter Vol 7:3 Nov 1994
summary	3D Studio is an IBM-compatible computer modeling program that enables users to create three-dimensional renderings of a variety of objects. In its ability to import a wide variety of maps and other images, 3D Studio allows for the realistic rendering of models created within AutoCAD or other 3D CAD packages. Over the past year, the Homol'ovi research program has been utilizing this software to create near photo-realistic renderings of conjectural site models. My own interests in three-dimensional computer modeling developed out of work at the site of Homol'ovi IV, a 150-room pueblo site located near Winslow, Arizona. The site was situated upon a steep 30-meter bluff with a bedrock cap. Approximately 24 rooms were located on top of the bedrock cap, with another 125 rooms situated on the slope of the butte. During the 1989 field season five structures were excavated, while a separate crew worked clearing and mapping the tops of walls. Mapping was accomplished with a Topcon EDM/theodolite station, and a standard map was created from this process. (See Fig. 3.) While the map was sufficient to show the general layout of the site, I remained unsatisfied; a 2D plan view simply did not convey the vertical dimension of the pueblo. At this point the Homol'ovi Research Program purchased a copy of AutoCAD in order to begin exploring three-dimensional mapping and modeling.
series	other
last changed	2003/04/23 15:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ab63
authors	Gross, Mark D.
year	1990
title	Relational Modeling: A Basis for Computer-Assisted Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 123-136
summary	Today's computer assisted design (CAD) systems automate traditional ways of working with tracing paper and pencil, but they cannot represent the rules and relationships of a design. As hardware becomes faster and memory less expensive, more sophisticated fundamental software technologies will be adopted. This shift in the basis of CAD will provide powerful capabilities and offer new ways to think about designing. Recently parametric design, a technique for describing a large class of designs with a small description in code, has become a focus of attention in architectural computing. In parametric CAD systems, design features are identified and keyed to a number of input variables. Changes in the input values result in variations of the basic design. Based on conventional software technologies, parametric design has been successfully applied in many design domains including architecture and is supported by several commercial CAD packages. A weakness of parametric techniques is the need to predetermine which properties are input parameters to be varied and which are to be derived. Relational modeling is a simple and powerful extension of parametric design that overcomes this weakness. By viewing relations as reversible rather than one-way, any set of properties can be chosen as input parameters. For example, a relational model that calculates the shadow length of a given building can also be used to calculate the building height given a desired shadow length. In exercising a relational model the designer is not limited to a pre-selected set of input variables but can explore and experiment freely with changes in all parts of the model. Co is a relational modeling environment under development on the Macintosh-II computer, and Co-Draw, a prototype CAD program based on Co. Co's relationaI engine and object-oriented database provide a powerful basis for modeling design relations. Co-Draw's interactive graphics offer a flexible medium for design exploration. Co provides tools for viewing and editing design models in various representations, including spreadsheet cards, tree and graph structures, as well as plan and elevation graphics. Co's concepts and architecture are described and the implications for design education are discussed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	578d
authors	Helpenstein, H. (Ed.)
year	1993
title	CAD geometry data exchange using STEP
source	Berlin: Springer-Verlag
summary	With increasing demand for data exchange in computer integrated manufacturing, a neutral connection between dissimilar systems is needed. After a few national and European attempts, a worldwide standardization of product data has been developed. Standard ISO 10303 (STEP - STandard for Exchange of Product data) produced in its first version those parts that are relevant for CAD geometrical data. A European consortium of 14 CAD vendors and users was supported by the ESPRIT programme to influence the emerging standard and implement early applications for it. Over the years 1989-1992, project CADEX (CAD geometry data EXchange) worked out application protocols as a contribution to STEP; developed a software toolkit that reads, writes, and manipulates STEP data; and, based on this toolkit, implemented data exchange processors for ten different CAD and FEA systems. This book reports the work done in project CADEX and describes all its results in detail.
series	other
last changed	2003/04/23 15:14

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	21b5
authors	Müller, Volker
year	1993
title	Introducing CAD to a Big Corporation
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 497-512
summary	The report presents the ongoing activity of introducing CAD to the entire range of facilities planning and management of the Frankfurt Airport Corporation. It addresses issues of organizing the shift from conventional to computer supported planning and facilities management,- the problems of training professionals with various background in the use of new tools; aspects of data validity; regulation of data exchange; and customization of software to the needs of special tasks within the corporation. The report is based on about four years of project runtime. The preparation of the project started in fall 1988. The project proper started in June 1989. It is entering its last year. Up to now about 120 persons have been trained to use CAD.
keywords	CAD Introduction, Corporation Setting, Adult Education, Data Integrity, Data Security, Data Exchange, Linkage Between Geometric and Alphanumeric Data, Customized Systems
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	6dc2
authors	Rahman, Shama
year	1989
title	The Realities of Introducing IT/CAD in Architectural and Interior Design Education: A Case Study at the Polytechnic of North London
doi	https://doi.org/10.52842/conf.ecaade.1989.x.j5h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.1.1.-4.1.9
summary	This paper is an attempt to illustrate the realities of introducing Information Technology at a school of Architecture and Interior Design. The department, under the auspicies of the Polytechnic of North London, comprises of 520 full/part time students working towards various professional and postgraduate degrees and diplomas in Architecture and Interior Design. For the last 18 months, the department has undertaken a rapid IT/CAD implementation programme. This has involved developing a strategy, formulating resource needs and implementing teaching. The strategy is based on the concept of application of IT as a tool for design and a medium for representation, management, use and exchange of design information. A course outline has been developed suggesting what could be taught and who could be taught what, how, when and for how long. At the same time, different types of teaching methods are being experimented upon. On the basis of these factors, attempts are being made to meet resource needs for software, hardware, teaching and technical support. Various issues and problems have been brought to light e.g. overcoming cost of hardware and software, lack of teaching and technical support, finding time slots in overloaded curriculums, changing existing attitudes towards IT,etc. We have approached these problems in various ways. We liaise closely with architects' offices, and try to use student skills and expertise within the polytechnic. We try to overcome time-slot problems by joint teaching and assessment with other subjects and try to integrate IT/CAD with studio-based design projects by locating computlng facilities inside studios. This paper is a story of how we have set for ourselves a path to follow. This path is by no means rigid and will continuously change with new experiences and the demands of a volatile industry. We have only just begun.
series	eCAADe
last changed	2022/06/07 07:50

_id	6743
authors	Retik, A
year	1989
title	Computer-Aided Design of Precast Building System
source	Proceedings of the International Conference on CAD/CAM and AMT. December, 1989. pp. 1-5 : some ill. includes bibliography
summary	The paper describes an expert system for computerized design of precast building components for a given architectural solution. The system receives the layouts and evaluations of the building as input, indicates the location of structural supports, breaks down the floors and walls into the elements to be prefabricated, and finally generates detailed production drawings for each element. Design stages are governed by the specific features of the prefabrications system to be employed. Design alternatives are also evaluated in the course of the process. The paper reviews the principles of the system and the particular features of the computer program employed for this purpose
keywords	building, layout, floor plans, structures, construction, design, details, expert systems, prefabrication
series	CADline
last changed	1999/02/12 15:09

_id	1c3b
authors	Rubinger, Morton
year	1989
title	Will CAD Survive Designers?
doi	https://doi.org/10.52842/conf.acadia.1989.159
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 159-173
summary	Discussion about the future of CAD often focuses on hardware and software. But that is the wrong emphasis. Future directions for CAD should be considered from the point of view of what is of value to architectural design. This paper is mainly concerned with the needs of architectural design education. For CAD to develop effectively, design education must first address some existing problems which threaten the future of CAD. These problems result mainly from conflicts between traditional design values and needs of using computers. For computers to aid design, software designers need a clearer picture of what design is. But there is no single acceptable meaning of design. Instead several different yet coherent meanings with historical roots are suggested. Each of these directions have different implications for the development of CAD.
series	ACADIA
last changed	2022/06/07 07:56

_id	2786
authors	Woodwark, J.R.
year	1989
title	Splitting Set-Theoretic Solid Models into Connected Components
source	10 p. : ill. Winchester: IBM UK Scientific Center, IBM United Kingdom Laboratories Limited, June, 1989. IBM UKSC 210. includes bibliography In general, there is no way to tell how many pieces (connected components) a set-theoretic (CSG) solid model represents, except via conversion to a boundary model. Recent work on the elimination of redundant primitives has been linked with techniques for identifying connected components in quad-trees and oct-trees into a strategy to attack this problem. Some success has been achieved, and an experimental Prolog program, working in two dimensions, that finds connected components and determines the set-theoretic representation of each component, is reported, and further developments proposed. CSG / quadtree / octree / primitives / algorithms. 43. Woodwark, J. R. and Quinlan K. M. 'Reducing the Effect of Complexity on Volume Model Evaluation.' Computer Aided Design. April, 1982. pp. 89-95 : ill. includes bibliography.
summary	A major problem with volume modelling systems is that processing times may increase with model complexity in a worse than linear fashion. The authors have addressed this problem, for picture generation, by repeatedly dividing the space occupied by a model, and evaluating the sub-models created only when they meet a criterion of simplicity. Hidden surface elimination has been integrated with evaluation, in such a way that major portions of the model which are not visible are never evaluated. An example demonstrates a better than linear relationship between model complexity and computation time, and also shows the effect of picture complexity on the performance of the process
keywords	CAD, computational geometry, solid modeling, geometric modeling, algorithms, hidden surfaces, CSG
series	CADline
last changed	2003/06/02 13:58

_id	1f1b
authors	Richens, P.
year	1989
title	MicroCAD Software Evaluated
source	Construction Industry Computer Association, Cambridge
series	other
email
more	http://www.arct.cam.ac.uk/research/pubs/
last changed	2000/03/05 19:05

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	6bfa
authors	Bijl, Aart
year	1989
title	Evaluation and Representation
source	December, 1989. 11 p. : ill. includes bibliography
summary	In this paper the author will consider four key concepts: design, evaluation, models, and representation. In combination, definitions of these concepts impinge on each other and they are further conditioned by the author intention to represent design knowledge within computers. The issue of human-computer interaction then becomes critical to the usefulness of knowledge representations for designers
keywords	CAD, representation, design, evaluation
series	CADline
last changed	1999/02/12 15:07

_id	e19d
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1989
title	Capturing Designer Expertise : The CGEN System
source	18 p. : ill Pittsburgh, PA: Engineering Design Research Center, CMU, August, 1989. EDRC 18-08-89. includes bibliography.
summary	Knowledge-based systems are becoming pervasive in the computer-aided design area. For these systems to achieve satisfactory levels of performance large amounts of knowledge are necessary. However, the acquisition of knowledge is a difficult and tedious task. Automated knowledge-acquisition tools (AKAT) provide capabilities for quickly building and maintaining knowledge-bases. This paper describes the CGEN AKAT, which allows hardware designers, unfamiliar with artificial intelligence programming techniques, to deposit their expertise into a synthesis tool's knowledge-base. A set of experiments which tested CGEN's capabilities are presented. The experiments show that with CGEN hardware designers can produce high quality knowledge-bases
keywords	CAD, automation, knowledge acquisition, tools, AI, programming, knowledge base, systems, integrated circuits, hardware
series	CADline
last changed	2003/06/02 10:24

_id	6a30
authors	Bonn, Markus
year	1989
title	Modeling Architectural Forms through Replacement Operations
doi	https://doi.org/10.52842/conf.acadia.1989.103
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 103-130
summary	Replacement operations, where an element at any topological level may be replaced by another element at the same or different topological level, are defined. Their potential as design tools which may be incorporated in a CAD system is investigated and demonstrated through the experimental implementation of two such operations in MARCOS, a Modeling Architectural Compositions System. MARCOS has been written in C. It is highly interactive and runs on an Apple Macintosh IIx. The two operations which have been implemented are the face -> volume and volume -> volume replacements. They were chosen for their potential as generators of architectural forms. Examples of architectural compositions produced through the use of replacement operations are also illustrated.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: