Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 201

Reformat results as: short short into frame detailed detailed into frame

_id	ab63
authors	Gross, Mark D.
year	1990
title	Relational Modeling: A Basis for Computer-Assisted Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 123-136
summary	Today's computer assisted design (CAD) systems automate traditional ways of working with tracing paper and pencil, but they cannot represent the rules and relationships of a design. As hardware becomes faster and memory less expensive, more sophisticated fundamental software technologies will be adopted. This shift in the basis of CAD will provide powerful capabilities and offer new ways to think about designing. Recently parametric design, a technique for describing a large class of designs with a small description in code, has become a focus of attention in architectural computing. In parametric CAD systems, design features are identified and keyed to a number of input variables. Changes in the input values result in variations of the basic design. Based on conventional software technologies, parametric design has been successfully applied in many design domains including architecture and is supported by several commercial CAD packages. A weakness of parametric techniques is the need to predetermine which properties are input parameters to be varied and which are to be derived. Relational modeling is a simple and powerful extension of parametric design that overcomes this weakness. By viewing relations as reversible rather than one-way, any set of properties can be chosen as input parameters. For example, a relational model that calculates the shadow length of a given building can also be used to calculate the building height given a desired shadow length. In exercising a relational model the designer is not limited to a pre-selected set of input variables but can explore and experiment freely with changes in all parts of the model. Co is a relational modeling environment under development on the Macintosh-II computer, and Co-Draw, a prototype CAD program based on Co. Co's relationaI engine and object-oriented database provide a powerful basis for modeling design relations. Co-Draw's interactive graphics offer a flexible medium for design exploration. Co provides tools for viewing and editing design models in various representations, including spreadsheet cards, tree and graph structures, as well as plan and elevation graphics. Co's concepts and architecture are described and the implications for design education are discussed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	435a
authors	Mitchell, William J.
year	1990
title	Afterword: The Design Studio of The Future
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 479-494
summary	Things began to change in the mid-1940s, though architects hardly noticed. Scientists and engineers started to speculate that the new electronic technologies which had emerged in the wartime years would profoundly change the character of intellectual work. Vannevar Bush (1945) imagined a device called the Memex, which would function as a personal information server. By the 1950s computers were becoming a commercial reality, and in 1956 Fortune magazine published a remarkably prescient depiction of a machine that we can now recognize as a computer-aided design workstation complete with graphic input devices and a multi-window display showing different views of a three-dimensional object. These wonderful machines were never built, much less put to any practical use, but they established a powerful idea.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	3964
authors	Yoshikawa, H. and Gossard, D. (eds.)
year	1989
title	Intelligent CAD
source	North-Holland, Amsterdam, pp. vii-ix
summary	In this research, design process knowledge is represented at two different levels, action level and object level, corresponding to the meta-knowledge to model design behaviors and the special knowledge to model the processes in designing particular objects. A design knowledge base and database modeling language - Integrated Data Description Language (IDDL) was developed at the University of Tokyo to model both design processes and design objects. This language combines logic programming functions and object oriented programming functions into an integrated environment. Using this language, an intelligent CAD system - Intelligent Integrated Interactive CAD (IIICAD) was developed at the University of Tokyo. Contradictions of knowledge base and database are resolved using circumscription and Assumption-based Truth Maintenance System (ATMS) in this system. Many advanced knowledge modeling techniques, including Qualitative Process Theory (QPT), modal logic, default reasoning, etc., have also been introduced in the IIICAD system. The knowledge base and database representation scheme of IDDL serves as the basis in the feature-based integrated concurrent design system. In the integrated concurrent design system, a new feature modeling language was introduced. In addition to the qualitative and quantitative data/relations that were introduced in IDDL, the composing element features, data dependency relations, constraints, 2D and 3D feature geometric descriptions have also been introduced for representing product life-cycle models and their relations. Optimization functions were added to the integrated concurrent design system to identify the optimal design considering relevant life-cycle aspects.
series	other
last changed	2003/04/23 15:14

_id	2728
authors	Daniell, J. and Director, S.W.
year	1989
title	An Object Oriented Approach to CAD Tool Control Within a Design Framework
source	Engineering Design Research Center, CMU, Pittsburgh, PA, USA
summary	As VLSI design frameworks evolve, a distributed control mechanism for CAD tools has become a central research issue. In this paper, we present an object oriented tool integration methodology that treats the tools as objects. This approach simplifies CAD tool control within a design framework making the framework more general, easier to use, and more capable of supporting a large population of CAD tools.
series	other
last changed	2003/04/23 15:50

_id	84f6
authors	Ferrari, Carlo and Naticchia, Berardo
year	1989
title	Definition of Spatial Elements of the Building System: “Reasoner A” in the Castorp System
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.2.1-7.2.10
doi	https://doi.org/10.52842/conf.ecaade.1989.x.p5w
summary	This paper tackles the problem of the functional and morphological definition of elementary spaces (in relation to the overall definition of the building object) through the study and the modelization of the designer's knowledge and of the cognitive processes which use it. An interactive automatic system which solves the problem of the placing of objects within a predefined environment is then described. This is the first element in a more general system which is meant as an intelligent aid to building design.
series	eCAADe
last changed	2022/06/07 07:50

_id	f4fb
authors	Karasick, Michael
year	1989
title	On the Representation and Manipulation of Rigid Solids
source	McGill University, Department of Computer Science, Montreal
summary	Solid modeling studies how to represent geometric properties of solids by computer. A fundamental operation is the construction of representations of solids. Algorithms for set operations construct boundary representations of solids from boundary representations of other solids. A correct and efficient intersection algorithm for polyhedral solids that uses boundary representations is described. A finite-precision implementation of the algorithm uses incidence tests that use symbolic inference in order to limit errors due to finite-precision approximations. The incidence tests are described and experimental evidence is presented to show that the incidence tests are both empirically reliable and practical. The intersection algorithm uses a new boundary representation called the Star-Edge representation. A complementation algorithm for solids that uses the new representation is given, and an algorithm is given that uses the new representation to determine if two boundary representations describe the same solid. A canonical boundary representation for solids is described and used to prove a lower bound for the same-object problem.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	e91f
authors	Mitchell, W.J., Liggett, R.S. and Tan, M.
year	1990
title	Top-Down Knowledge-Based Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 137-148
summary	Traditional computer drafting systems and three- dimensional geometric modeling systems work in bottom-up fashion. They provide a range of graphic primitives, such as vectors, arcs, and splines, together with operators for inserting, deleting, combining, and transforming instances of these. Thus they are conceptually very similar to word processors, with the difference that they operate on two- dimensional or three-dimensional patterns of graphic primitives rather than one-dimensional strings of characters. This sort of system is effective for input and editing of drawings or models that represent existing designs, but provides little more help than a pencil when you want to construct from scratch a drawing of some complex object such as a human figure, an automobile, or a classical column: you must depend on your own knowledge of what the pieces are and how to shape them and put them together. If you already know how to draw something then a computer drafting system will help you to do so efficiently, but if you do not know how to begin, or how to develop and refine the drawing, then the efficiency that you gain is of little practical consequence. And accelerated performance, flashier color graphics, or futuristic three-dimensional modes of interaction will not help with this problem at all. By contrast, experienced expert graphic artists and designers usually work in top-down fashion-beginning with a very schematic sketch of the whole object, then refining this, in step-by-step fashion, till the requisite level of precision and completeness is reached. For example, a figure drawing might begin as a "stick figure" schema showing lengths and angles of limbs, then be developed to show the general blocking of masses, and finally be resolved down to the finest details of contour and surface. Similarly, an architectural drawing might begin as a parti showing just a skeleton of construction lines, then be developed into a single-line floor plan, then a plan showing accurate wall thicknesses and openings, and finally a fully developed and detailed drawing.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	effd
authors	Morozumi, M., Nakamura, H. and Kijima, Y.
year	1990
title	A Primitive-Instancing Interactive 3-D Modeling System for Spatial Design Studies
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 457-468
summary	The authors have developed a basic, interactive, primitive-instancing 3-D modeling system (CAADF), which is based on a high-speed 3-D color graphic workstation, and have tested its potential ability to support spatial design studies in an architectural design studio. After- a review of work performed by a student with the system, this paper concludes that this system provides an attractive environment for spatial design studies which conventional CAD systems have not achieved. The interactive process of 3-D modeling in perspective or isometric view images and the dynamic viewing utility are the most successful features of the system. In contrast to those advantages, the resolution of color graphic display is a limitation of the system. The authors conclude that if sufficiently many appropriate 3-D geometric primitives are supported by a CAD system, a primitive instancing method can significantly reduce the work entailed in object modeling.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ce38
authors	Paoluzzi, Alberto and Sansoni, Claudio
year	1989
title	A Programming Language for Architectural Symbolic Modeling
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.4.1-8.4.16
doi	https://doi.org/10.52842/conf.ecaade.1989.x.r3e
summary	In this paper a software project supporting architectural design is outlined. Such a project aims to develop the new design language PLASM (a Programming Language for Architectural Symbolic Modeling), which is planned to be a very high-level, user-oriented language, belonging to the class of constraint languages. The language PLASM will support a small set of abstract data types which are significant in various outstanding problems of architectural design, and will offer both procedural features and non-procedural constraints satisfaction. It will allow the designer to make use of a large set of computing tools in any phase of architectural design, in order to explore a wider set of design solutions. Customizable evaluation functions will be available in the language. The execution of a PLASM program may result either in generating or in updating a semantic network over a set of data objects solving the geometric problem under consideration. The proposed language will support both abstract data types significant in the design domain, and tools performing automatized data generation and transformations between different data types. The modification of any object in such a system, both performed by editing a daemon program and/or by interactively modifying a data object, will result in the immediate propagation of changes into the problem network, by activating a message passing mechanism.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	4825
authors	Van Bakel, A.P.M. and Daru, R.
year	1993
title	CAADidactics - An Instrument for Tuning CAAD Systems to Student Styles
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.j4l
summary	This paper discusses the features of an instrument for tuning CAAD systems to student styles implemented in the authoring shell Authorware Professional (1989). This application enables students and teachers to evaluate the design progress. It also makes it possible to assess their preferences with respect to their working styles (Subject style) and style preferences in terms of the product style (Object style) in different stages of the design curriculum. The availability of this information enables teachers to adapt their didactical approach to their students. The progress they make during design education can be evaluated by looking at the process documentation as well as by looking at the product documentation generated by the application. This makes the students conscious of their own preferences and affinities. It is up to the student and the teacher whether they want to enhance or compensate those preoccupations. The documented information of previous design sessions can also be used as a guide system for further development and adaptations in styles of design and designing. In the design studio this style knowledge can also be used to establish adequate and workable design teams. Some of the features discussed in this paper are already implemented in a small prototype application. The prototype application will be presented and discussed. Other features will be implemented in the near future.
series	eCAADe
last changed	2022/06/07 07:50

_id	9203
authors	Winston, P. and Horn
year	1989
title	LISP
source	Addison-Wesley, Reading, MA (3rd. edition)
summary	The new edition retains the broad coverage of previous editions that has made this book popular both with beginners and with more advanced readers---coverage ranging from the basics of the language to detailed examples showing Lisp in practice. Based on the CommonLisp standard, this book also introduces CommonLisp's object system, CLOS, and the productivity-promoting techniques enabled by object-oriented programming. Application examples drawn from expert systems, natural language interfaces, and symbolic mathematics are featured, and new applications dealing with probability bounds, project simulation, and visual object recognition are introduced.
series	other
last changed	2003/04/23 15:14

_id	ddss9201
id	ddss9201
authors	Van Bakel, A.P.M.
year	1993
title	Personality assessment in regard to design strategies
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper discusses some preliminary results of several knowledge-acquisition and documentation-structuring techniques that were used to assess the working styles of architects. The focus of this assessment was on their strategic design behaviour. Hettema's Interactive Personality Model (Hettema 1979, 1989) was used to explain and interpret these results. The methods used to acquire the necessary data are protocol analysis, card sorting and interviews. The results suggest that at least three parameters can be used to explain and differentiate the strategic design behaviour of architects. These parameters are S (site-oriented), B (brief-oriented) and C (concept-oriented). A priority hierarchy of these parameters reveals six major distinguishable working styles. These results are captured in a new design model that can be used in data bank implementations.
series	DDSS
last changed	2003/08/07 16:36

_id	6bfa
authors	Bijl, Aart
year	1989
title	Evaluation and Representation
source	December, 1989. 11 p. : ill. includes bibliography
summary	In this paper the author will consider four key concepts: design, evaluation, models, and representation. In combination, definitions of these concepts impinge on each other and they are further conditioned by the author intention to represent design knowledge within computers. The issue of human-computer interaction then becomes critical to the usefulness of knowledge representations for designers
keywords	CAD, representation, design, evaluation
series	CADline
last changed	1999/02/12 15:07

_id	268e
authors	Christiansson, Per
year	1990
title	Integration of Knowledge Based Systems and Media
source	BYGGA MED IT. Informatiosteknologi i byggprocess. November, 1990. 4 p. : ill. includes bibliography The borders between different representations and their implementation in the computer systems are not sharp. It is possible now to create models which bring about a clearer and more obvious connection between the application and the computer stored models. knowledge base / systems / media / modeling / representation / integration. 32. Christiansson, Per. 'The KBS-MEDIA Project.' MacWorld Expo Asia '89. 1989. 2 p. : ill.
summary	A short description of the KBS-MEDIA, knowledge based systems - media project advanced software
keywords	knowledge base, systems, media
series	CADline
last changed	1999/02/12 15:07

_id	49a8
authors	McCall, R., Fischer, G. and Morch, A.
year	1990
title	Supporting Reflection-in-Action in the Janus Design Environment
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 247-259
summary	We have developed a computer-based design aid called Janus, which is based on a model of computer-supported design that we think has significance for the future of architectural education. Janus utilizes a knowledge-based approach to link a graphic construction system to hypertext. This allows the computer to make useful comments on the solutions that students construct in a CAD-like environment. These comments contain information intended to make students think more carefully about what they are doing while they are doing it. In other words, Janus promotes what Donald Schon has called "reflection-inaction" (Schon, 1983). The Janus design environment is named for the Roman god with a pair of faces looking in opposite directions. In our case the faces correspond to complementary design activities we call construction and argumentation. Construction is the activity of graphically creating the form of the solution e.g., a building. Traditionally this has been done with tracing paper, pencils, and pens. Argumentation is the activity of reasoning about the problem and its solution. This includes such things as considering what to do next, what alternative courses of action are available, and which course of action to choose. Argumentation is mostly verbal but partly graphical.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	001a
authors	Stiny, George
year	1990
title	What Designers Do That Computers Should
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 17-30
summary	Designers do many things that computers don't. Some of these are bad habits that the stringencies of computation will correct. But others are basic to design, and cannot be ignored if computation is to serve creation and invention. Two of these provide the correlative themes of this paper. Both are concerned with description, and its variability and multiplicity in design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	d703
authors	Tovey, M.
year	1989
title	Drawing and CAD in industrial design
source	Design Studies, Vol. 10, No. 1, pp. 24-39
summary	Drawing is an essential component in the industrial design process, facilitating visual thinking and creativity. It constitutes one type of design model, along with specifications, 3D representations and CAD techniques. The design process involves movement from one model to another, and by using representations of different types and at different levels of detail a fluid and inventive design approach is facilitated. Examples of schematic drawings, ideas sketches and concept drawings demonstrate this in product design and transport design. CAD has proved to be highly effective in evaluative and analytical design development, and in manufacture. It is inherently unsuitable for innovative design, but has potential for contributing to evolutionary design, as is evidenced by its proven effectiveness in engineering optimization. Automotive design is almost always concerned with design evolution, and procedures for car stylists to work productively with CAD are being developed in Coventry Polytechnic's SERC funded research project Computer Aided Vehicle Styling. Vehicle stylist's design thinking is characterized by holistic, right-hemisphere processes informed by tacit knowledge and dependent on visual representation. They have particular difficulties with CAD systems. Nonetheless, design techniques that capitalize on CAD's potential and may be applicable to industrial design are briefly described. CAD drawings and conventional design drawings are compared by using examples from the car industry, and from the research project. Tentative speculations about future design procedures are made.
series	journal paper
last changed	2003/04/23 15:14

_id	a8b7
authors	De Grassi, Mario and Di Manzo, Mauro
year	1989
title	The Design of Buildings as Changes of Known Solutions: A Model for “Reasoner B” ; Reasoner B" in the Castorp System
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.3.1-7.3.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.u3h
summary	The paper presents a study aimed at the modelization of a design operation of perturbation of an architectural framework in order to comply with a series of given design specifications. A formalized representation of the building object is assumed, Artificial Intelligence techniques are adopted to work on it. It is assumed that the computer carries out deformations starting from one of these structures in order to attain to a solution consistent with project specifications. A description of the structures employed for the representation of the building body (matroids) is firstly proposed. A planning theme is then assumed, as an example, whose main feature is to maintain the outer perimeter of a dwelling, to change its internal distribution in such a way as to resemble as closely as possible to the original and yet meaningfully alter its typology.
series	eCAADe
type	normal paper
last changed	2022/06/07 07:50

_id	4104
authors	Ervin, Stephen McTee
year	1989
title	The structure and function of diagrams in environmental design :a computational inquiry
source	Massachusetts Institute of Technology
summary	The design process often begins with a graphical description of the proposed device or system and sketching is the physical expression of the design engineer's thinking process. Computer Aided Design is a technique in which man and machine are blended into a problem solving team, intimately coupling the best characteristics of each. Solid modelling is developed to act as the common medium between man and the computer. At present it is achieved mainly by designing with volumes and hence does not leave much room for sketching input, the traditional physical expression of the thinking process of the design engineer. This thesis describes a method of accepting isometric free hand sketching as the input to a solid model. The design engineer is allowed to make a sketch on top of a digitizer indicating (i) visible lines; (ii) hidden lines; (iii) construction lines; (iv) centre lines; (v) erased lines; and (vi) redundant lines as the input. The computer then processes this sketch by identifying the line segments, fitting the best possible lines, removing the erased lines, ignoring the redundant lines and finally merging the hidden lines and visible lines to form the lines in the solid in an interactive manner. The program then uses these lines and the information about the three dimensional origin of the object and produces three dimensional information such as the faces, loops, holes, rings, edges and vertices which are sufficient to build a solid model. This is achieved in the following manner. The points in the sketch are first written into a file. The computer than reads this file, breaks the group of points into sub-groups belonging to individual line segments, fits the best lines and identify the vertices in two dimensions. These improved lines in two dimensions are then merged to form the lines and vertices in the solid. These lines are then used together with the three dimensional origin (or any other point) to produce the wireframe model in three dimensions. The loops in the wireframe models are then identified and surface equations are fitted to these loops. Finally all the necessary inputs to build a B-rep solid model are produced.
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: