Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 208

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2b8f
authors	Colajanni, Benedetto and De Grassi, Mario
year	1989
title	Inferential Mechanisms to be Employed in CAAD: The Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.c7m
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.1.1-7.1.9
summary	The paper presents an approach to the problems of architectural design aided by Artificial Intelligence techniques that can solve the difficulties related to combinatorial explosion, often encountered in the past. Three expert systems, dubbed "reasoners", capable of some elementary design work and a hypothesis for their interaction have been developed. Reasoner A has an "analogical" view of space. A notion of conflict, managed by means of fuzzy logic, has been introduced. It corresponds, in an intuitive and straightforward fashion, to the common notion of conflict or contradiction in real space as a consequence of improper overlapping of actual physical objects or of their functional pertinence. Reasoner B works on formalized models of building objects. It designs new patterns from given patterns taken as defaults. Reasoner C picks up from an archive of patterns the one which best suits a list of given goals. Design is the result of interaction between the three reasoners. Finally, the proposed schema raises questions about formal structures ("images") and about the nature of culturally-linked options ("memory") on which some preliminary considerations are made. Prototypes of the reasoners are operating at the Instituto di Edilizia of the University of Ancona, Italy.
series	eCAADe
last changed	2022/06/07 07:50

_id	e33a
authors	De Cola, S., De Cola, B. and Pentasuglia, Francesco
year	1990
title	Messina 1908: The Invisible City
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 239-246
summary	The initial purposes of this work were to build a 3D model of the old city of Messina and to reconstruct a walk through it; to understand the "Ghost city," the parts that form it, and the rules of its plan, which are explicit in some cases but hidden most of the time; to measure its space, appreciate the similarities to and differences from modern city plans, and use the information to improve the plans of tomorrow. It might seem a useless study of a nonexistent city, and yet during the months of detailed work, of patient reconstruction from the surveys and photographs of the city destroyed in 1908, we began to consider how it was still possible to obtain spatial values of and to project behaviors in the lost city, in other words, to practice tests on memory that are very interesting for people working in a context in which memory no longer exists. The work presented here is the first stage of a more complex research project still to be carried out on Messina as it was at the end of the nineteenth century. Here we constructed a 3D model of some parts of the city prior to the earthquake of 1908 and made a five-minute video, using cartoon techniques, of an "impossible" walk through the city. The fragments of the city were reconstructed from available documentary sources, primarily photographic images, which tended to be of the most important places in the city.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	5fe7
authors	Hoffmann C.M.
year	1989
title	Geometric and Solid Modeling
source	Morgan Kaufmann
summary	Solid modeling is rapidly emerging as a central area of research and de- velopment in such diverse applications as engineering and product design, computer-aided manufacturing, electronic prototyping, o -line robot pro- gramming, and motion planning. All these applications require represent- ing the shapes of solid physical objects, and such representations and basic operations on them can be provided by solid modeling. As a eld, solid modeling spans several disciplines, including mathemat- ics, computer science, and engineering. In consequence, it is a broad subject that must accommodate a diversity of viewpoints and has to meet a diversity of goals. Sometimes, this diversity of goals can lead to con icting demands. Current thinking on the subject views the proper resolution of these con- icts to be application-dependent. That is, it is no longer thought realistic to envision a comprehensive solid-modeling system that satis es the needs of all potential users. Rather, as it is argued, we should concentrate on con- structing a software environment in which many tools for geometric and solid computation are available and can be combined with ease as appropriate for the speci c application under consideration.
series	other
last changed	2003/04/23 15:14

_id	acadia06_079
id	acadia06_079
authors	Kumar, Shilpi
year	2006
title	Architecture and Industrial Design A Convergent Process for Design
doi	https://doi.org/10.52842/conf.acadia.2006.079
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 79-94
summary	The use of technology has grown with the way design professions have evolved over time. Changing needs, desires of comfort, and perceptions of the consumers have led to a distinct improvement in the design of both product and architecture. The use of the digital media and emerging technologies has brought a dramatic change to the design process allowing us to view, feel, and mould a virtual object at every stage of design, development, and engineering. Change is often quick and easy since a virtual product does not inherently carry the biases of its physical counterpart. In order to communicate ideas across the team, digital processes are also used to bring together opinions, experiences, and perspectives. These methods encourage decision making based on information rather than prejudice or instinct. Thus, digital exchanges (technology) impact firm strategies at three levels: product, process, and administrative or support activities (Adler 1989).Digital tools for design exchange in Industrial Design (ID) began much earlier than many other professions. The profession of Architecture is also slowly moving to a similar model with digital exchange finding increasing prevalence in drawing, modeling, performance simulation, design collaboration, construction management, and building fabrication. The biggest problem is the disintegrated use of technology in the architectural profession without a strategy toward streamlining the design process from conception to fabrication. In this paper we investigate how the use of technology has evolved in the professions of Industrial Design and Architecture comparatively in their product, process, and support activities. Further, we will present a set of guidelines that will help architects in the convergence of design process, helping in a more efficient work flow with a strategic use of digital technology.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	6152
authors	Longhi, Domenico
year	1989
title	A System for Building Design Information Management
doi	https://doi.org/10.52842/conf.ecaade.1989.x.b7n
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.11.1-9.11.8
summary	Computer assistants to building process management are not able nowadays to efficiently work out the problems generated by the increased complexity of designing. Actual difficulties depend, on one hand, on the fact D.B.M.S. that have been developed on other environments than CAAD, and on the other hand, on the fact that architectural design process is scarcely formalized. At the Department of T.E.C.A., at the University of Rome, a PhD research program is aimed to overcome difficulties, working out techniques of information management based on Knowledge Engineering and particularly on Knowledge Base Management Systems and Expert Database Systems. At present a prototype system is being developed, that can manage existing technical information, connected with buiIding process.
keywords	Information Management, Data Base, Computer Assistants, BuiIding Process
series	eCAADe
last changed	2022/06/07 07:50

_id	2db4
authors	Schmitt, Gerhard
year	1992
title	Design for Performance
source	New York: John Wiley & Sons, 1992. pp. 83-100 : ill. includes bibliography Design for performance describes a generative approach toward fulfilling qualitative and quantitative design requirements based on specification and existing cases. The term design applies to the architectural domain: the term performance includes the aesthetic, quantitative, and qualitative behavior of an artifact. In achieving architectural quality while adhering to measurable criteria, design for performance has representational, computational, and practical advantages over traditional methods, in particular over post-facto single- and multicriteria analysis and evaluation. In this paper a proposal for a working model and a partial implementation of this model are described. architecture / evaluation / performance / synthesis / design / representation / prediction / integration. Ô h)000*°° ÔŒ21. Schneekloth, Lynda H., Rajendra K. Jain and Gary E. Day. 'Wind Study of Pedestrian Environments.' February, 1989. 30, [2] p. : ill. includes bibliography and index.
summary	This report summarizes Part 1 of the research on wind conditions affecting pedestrian environments for the State University of New York at Buffalo. Part 1 reports on existing conditions in the main part of the North Campus in Amherst. Procedures and methods are outlined, the profile of the current situation reported, and a special study on the proposed Natural Science and Math Building are included
keywords	architecture, research, evaluation, analysis, simulation, hardware
series	CADline
last changed	1999/02/12 15:09

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ecaade2015_38
id	ecaade2015_38
authors	Stavrakantonaki, Marina
year	2015
title	A Framework for Input Data Processing During Building Energy Model Calibration. A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2015.1.625
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 625-634
summary	Key parameter of a reasoning process supporting real time performance is the use of active heuristics that facilitate the achievement of goals in a timely manner (Dodiawala et al. 1989). A real time approach should incorporate speed, timeliness and adaptation during the execution of tasks. Speed and efficient knowledge processing are addressed for the solution of complex building engineering problems, such as the calibration of Building Energy Models (BEM) to the actual performance data. During retrofit projects, calibrated BEM models aid the design process, and provide a solid base for performative assessments. Despite the demand for building performance evaluations, BEM calibration remains a work-intensive task (Lam et al. 2014). This study proposes a time efficient framework for BEM calibration input data management based on the methodology of a blackboard artificial intelligence knowledge processing system. The resulting model was used for sequential data mining for the energy assessment during the renovation of a commercial building.
wos	WOS:000372317300068
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e440bdd6-7021-11e5-bdb0-00190f04dc4c
last changed	2022/06/07 07:56

_id	1b88
authors	Tang, John C.
year	1989
title	Listing, Drawing and Gesturing in Design: A Study of the Use of Shared Workspaces by Design Teams
source	Stanford University
summary	This dissertation is a descriptive study of the shared workspace activity of small groups working on conceptual design tasks. Shared workspace activity refers to the listing, drawing, and gesturing activity that occurs in the work environment of a group. This research is premised on the need to understand what participants actually do in an activity in order to guide the development of technology (especially advanced computer tools) to support this activity. The thesis presents: (1) a methodology for observing and analyzing collaborative design activity; (2) a detailed description and analysis of key aspects of shared workspace activity; (3) a set of specific recommendations for the design of tools to support shared workspace activity. The methodology of interaction analysis was applied to study the activity of small groups (3-4 people) working on short (approximately 1$1/over2$ hours) conceptual design tasks. The group's work was organized around either a whiteboard or large paper sheets on a conference table. Eight design sessions were videotaped and analyzed. The analysis included integrating a variety of perspectives on the data, including that of the participants themselves. The analysis focused on how teams use their shared workspace. A framework for analyzing workspace activity was proposed. This framework provides a structure for categorizing workspace activity according to two dimensions: actions and functions. The actions describe the process of producing the activity: listing, drawing or gesturing. The functions indicate the purpose effectively accomplished by the activity: storing information, expressing ideas, or mediating interaction. Using the framework to analyze workspace activity led to specific observations about shared workspace activity: (1) gestures, and their relationship to the workspace, convey important information; (2) the overhead involved in the process of recording information can be problematic; (3) the process of creating artifacts conveys significant information that is useful in understanding their meaning; (4) workspace actions and functions fluently intermix; (5) the nature of access to the workspace (orientation, simultaneous access, and proximity) structures how the workspace is used. These observations led to specific recommendations for the development of technology to support shared workspace activity.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	d703
authors	Tovey, M.
year	1989
title	Drawing and CAD in industrial design
source	Design Studies, Vol. 10, No. 1, pp. 24-39
summary	Drawing is an essential component in the industrial design process, facilitating visual thinking and creativity. It constitutes one type of design model, along with specifications, 3D representations and CAD techniques. The design process involves movement from one model to another, and by using representations of different types and at different levels of detail a fluid and inventive design approach is facilitated. Examples of schematic drawings, ideas sketches and concept drawings demonstrate this in product design and transport design. CAD has proved to be highly effective in evaluative and analytical design development, and in manufacture. It is inherently unsuitable for innovative design, but has potential for contributing to evolutionary design, as is evidenced by its proven effectiveness in engineering optimization. Automotive design is almost always concerned with design evolution, and procedures for car stylists to work productively with CAD are being developed in Coventry Polytechnic's SERC funded research project Computer Aided Vehicle Styling. Vehicle stylist's design thinking is characterized by holistic, right-hemisphere processes informed by tacit knowledge and dependent on visual representation. They have particular difficulties with CAD systems. Nonetheless, design techniques that capitalize on CAD's potential and may be applicable to industrial design are briefly described. CAD drawings and conventional design drawings are compared by using examples from the car industry, and from the research project. Tentative speculations about future design procedures are made.
series	journal paper
last changed	2003/04/23 15:14

_id	2728
authors	Daniell, J. and Director, S.W.
year	1989
title	An Object Oriented Approach to CAD Tool Control Within a Design Framework
source	Engineering Design Research Center, CMU, Pittsburgh, PA, USA
summary	As VLSI design frameworks evolve, a distributed control mechanism for CAD tools has become a central research issue. In this paper, we present an object oriented tool integration methodology that treats the tools as objects. This approach simplifies CAD tool control within a design framework making the framework more general, easier to use, and more capable of supporting a large population of CAD tools.
series	other
last changed	2003/04/23 15:50

_id	afdd
authors	Gupta, Anurag P. and Siewiorek, Daniel P.
year	1989
title	Hierarchical Design Synthesis : The M1 System
source	Pittsburgh: Engineering Design Research Center, September, 1989. 22 p. : ill. tables. includes bibliography
summary	Rapid advances in semiconductor technology are motivating the development of computer-aided design tools to assist human designers at the higher levels of the design process. In particular, there is a need for tools that aid system-level design synthesis - the process of producing a detailed artifact satisfying high level specifications given a set of components. A knowledge-based approach that uses a hierarchical design synthesis methodology is described. M1 is a knowledge-based system that implements the approach for the domain of single board computer design. A set of experiments which indicate M1's capabilities and the effectiveness of the approach in organizing and utilizing knowledge are presented
keywords	knowledge base, systems, design, expert systems, electrical engineering, integrated circuits, synthesis
series	CADline
last changed	2003/06/02 13:58

_id	45e6
authors	Agger, Kristian and Lentz, Uffe (Eds.)
year	1989
title	CAAD: Education - Research and Practice [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1989
source	eCAADe Conference Proceedings / ISBN 87-982875-2-4 / Aarhus (Denmark) 21-23 September 1989
summary	In the announcement of the sixth eCAADe Conference we stated that It is held at a time where CAAD is moving into practice very fast, with heavy influence on research and education. We stated that research is directed towards the early design phases, and that education is facing the problem of mass education. In that situation much benefit can be obtained from collaboration with practice. We decided to give the conference the title “CAAD: Education - Research and Practice” to state the importance of practice as a test bench. The conference papers cover education and research in depth in many important areas and give a good overview, whereas the practical theme is more or less missing, indicating, that experience here is still modest. At the lecture material market and the exhibition the situation is opposite and shows state of art in practical use.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	a74a
authors	Asanowicz, Alexander
year	1989
title	Four Easy Questions
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x8v
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.18.1-9.18.4
summary	Should we teach CAAD? - yes, but why? Answer to this question is clear too. Question three - "when?" - on the 5, 6 and 7 term. Why so rate? - it is a compromise because "Architecture is an art" and students of architecture should know how to make a project without computers. How to teach CAAD? - we should teach haw to use professional computer programs and not programming. We must work out a new manual for architects. It should be constructed in such a way as to correspond to consecutive steps of the architectural design process.
keywords	CAAD, Manuals, Architectural Design Process
series	eCAADe
email
last changed	2022/06/07 07:50

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8775
authors	Cigolle, Mark and Coleman, Kim
year	1990
title	Computer Integrated Design: Transformation as Process
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary	To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	600f
authors	Cortes, Chaves Camila
year	1989
title	Design Software of the '90s
source	Architectural and Engineering Systems. July, 1989. vol. 5: pp. 30
summary	The design firm of the '90s will have the ability to use the right tool for the right task, permitting tailored resources to be used more effectively. This mean portable, modular and multiuser software running on machines specifically designed for a particular environment with the option to tap other sources. Designers will enter the 21st century using integrated design knowledge-based support systems with knowledge-based inferencing systems, information management systems for text and graphics, a CAD/modeling package, and a flexible user interface with speech recognition, eye tracking and manual input device. Some of these are discussed in this article
keywords	practice, construction, systems, software, integration
series	CADline
last changed	1999/02/12 15:07

For more results click below: