Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 17 of 17

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	417a
authors	Cipriani, R., Lagomarsino, A.D., Stagnaro, A., Valenti, E. and Sambolino, T.
year	1990
title	Some Years' Experience Teaching CAAD
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 347-361
summary	In the conventional way of teaching architecture, it is common to think of design as the final synthesis of an intellectual process (composizione in Italian) integrating different elements from different curriculum subjects: history, structural analysis., technology, regional and urban planning, and so on. These elements, being comprehensive of their specific domains, together build the project. This process is supported by a long traditional that cannot easily be modified; however, we must not consider it to be the only one. Architectural practice should be much more. The Scuole di Architettura has walked a long and difficult road in the last thirty years., with a significant widening of interest in social, political, and economic issues. There have been recurring attempts at epistemological reformulation in some areas. There has been an acknowledgment of a crisis in contemporary town planning and a dimming of several certitudes that had developed with the birth and growth of the modernist school. And there has been a weakening of the promises that had given life to the vigorous discussion about town and regional planning. All of this leads to a reconsideration of the meaning and the deeper assumptions that the project implies, a question mark at the center of the human sciences that architectural practice involves. The old tradition., which assigned composition a central role in the project, is no longer sufficient because it is related to a reductive reading of epistemology that views human sciences as defining segments of physical knowledge of the actual world. Contemporary reflection on the difference between understanding and unfolding, together with the attention given to interpreting a moment as compared to purely describing one, gives to the project the task of inquiry instead of solution.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8bdf
authors	Crocker, Gary A. and Reinke, William F.
year	1989
title	Boundary Evaluation in a Non-Manifold Environment
source	November, 1989. 30 p., [16] p. of ill. includes bibliography
summary	The recent availability of Non-Manifold Topology (NMT) enables the coexistence of wireframe geometry, surfaces, and solids in a single representation with complete topological resolution. This in turn allows a new approach to boundary evaluation. This new approach merges a set of primitives into a single Boundary REPresentation (B-rep), and selects the desired Boolean results without destroying any B-rep entities. The results of the Boolean operations are displayed by drawing only selected entities. The B-rep resulting from the merge contains a complete description of the input primitives. While traditional algorithms allow incremental addition of primitives, this new approach also allows incremental deletion of primitives from the merged B-rep. Changes in Boolean operators and/or their order of evaluation can be reflected in the B-rep simply by changing the criteria of the selection process. Constructive Solid Geometry (CSG) editing operations can be mirrored in the B-rep incrementally, i.e. without performing complete reevaluation of the B-rep from its constituent primitive definitions. In addition, the domain of boundary evaluation has been extended to include Boolean operations between wireframe geometry, surfaces, and solids. This new approach has been successfully implemented and tested to boundary evaluation. Test results have shown an order of magnitude reduction in the cost associated with reflecting CSG editing operations on existing B-reps, with only minimal additional cost for initial construction. Also shown are examples of Boolean operations between solids, surfaces, and wires
keywords	computational geometry, boolean operations, solid modeling, B-rep, CSG, representation, topology, curved surfaces, intersection, curves,
series	CADline
last changed	2003/06/02 13:58

_id	22bd
authors	Hoffmann, C.M., Hopcroft, J.E. and Karasick, M.S.
year	1989
title	Robust Set Operations on Polyhedral Solids
source	IEEE Computer Graphics and Applications. November, 1989. vol. 9: pp. 50-59 : ill. includes bibliography
summary	The paper describes an algorithm for performing regularized Boolean operations on polyhedral solids. Robustness is achieved by adding symbolic reasoning as a supplemental step to resolve possible numerical uncertainty. Additionally, numerical redundancy and numerical computation based on derived quantities are reduced as much as possible. It also discusses the authors' experience with the implementation of the algorithm
keywords	algorithms, polyhedra, solids, representation, computational geometry, geometric modeling, boolean operations
series	CADline
last changed	2003/06/02 14:41

_id	4cf3
authors	Kalay, Yehuda E.
year	1989
title	Modeling Objects and Environments
source	xix, 402 p. : ill. New York: Wiley, 1989. includes a short bibliography and index. Part of the Principles of Computer Aided Design series. --- See also review by Patricia G
summary	McIntosh, in ACADIA Newsletter Vol. 9 No. 3 pp 20-23, June 1990. This book introduces the concept of modeling objects in the computer's memory so it can be used to aide the process of their design. Modeling is defined as an hierarchical abstraction of data and operators to manipulate it, subject to semantic integrity constraints that guarantee the realizability of the designed artifact in the real world. Starting with general concepts of modeling, the book moves on to discuss the modeling of shapes (form) in two and in three dimensions. The discussion covers both topology and geometry. Next the book introduces the concept of shape transformations (translation, scaling, rotation, etc.), both in absolute and in relative terms. The book then introduces the concept of assembly modeling, and adds non-graphical attributes to the representation. It concludes with a discussion on user interface and parametrization. The book includes many examples written in Pascal that complement the theory, and can be used as a basis for building a geometric modeling engine. It also includes exercises, so it can be used as a text book for a two-semester advance course in geometric modeling
keywords	CAD, data structures, solid modeling, abstraction, polygons, solids, boolean operations, transforms, computer graphics, user interface, parametrization, B-rep, polyhedra, objects, PASCAL
series	CADline
email
last changed	2003/06/02 13:58

_id	a495
authors	Kalay, Yehuda E.
year	1989
title	The Hybrid Edge : A Topological Data Structure for Vertically Integrated Geometric Modeling
source	Computer Aided Design. April, 1989. vol. 21: pp. 129-139 : ill. includes bibliography
summary	Generalizing the computational geometric support for the representation of designed artifacts over multiple different levels of symbolic abstraction (e.g., sketches, solid modeling, and drafting) is discussed. First, the need for integrating the representation and manipulation of points, lines, polygons and solids for the purpose of facilitating the design of artifacts at many levels of design abstractions established. Second, a vertically integrated model that supports the representation and manipulation of points, lines, polygons, and solids without redundancy, is presented. The particular roles of the operators and the operandi are discussed, along with their hierarchical integration. The utility of the model is demonstrated in performing operations that involve multiple different levels of data abstraction, such as splitting solids at an arbitrary polygon inscribed on their boundary. Finally, a particular implementation of the integrated model is presented. This implementation is based on the Hybrid Edge, a derivative from Baumgart's Winged Edge and Eastman's Split Edge models. The Hybrid Edge distinguishes between the roles of edges as topological adjacency information carriers and their role as carriers of directionality information. This distinction permits the Hybrid Edge to handle the different combinations of adjacency and directionality requirements imposed by different abstraction levels in the integrated model
keywords	geometric modeling, hybrid edge, topology, solid modeling, B-rep
series	CADline
email
last changed	2003/05/17 10:18

_id	a87a
authors	Kroszynski, U.I., Palstorem, Bj. and Trostmann, E. (et al)
year	1989
title	Geometric Data Transfer Between CAD Systems : Solid Models
source	IEEE Computer Graphics and Applications September, 1989. vol. 9: pp. 57-71 : ill. includes bibliography.
summary	The CAD/CAM community is showing great interest in the development of data exchange standards. This article highlights some aspects of the work accomplished during the first phase of the ESPRIT project CAD1. Part of this work has resulted in a specification for the exchange of solid models, as well as in some pilot implementations of processors based on this specification. This work also contributes to the efforts of the International Standards Organization (ISO) in developing the Standard for the Exchange of Product Model Data (STEP). The authors present a summary of the CAD1 approach, addressing the structure of neutral files for solids, entities, and attributes supporting three kinds of representations; facilities for the transfer of parametric designs; referencing library components; and other general mechanisms. Also is described the current state of the specification and processor implementations. An example of a CAD1 neutral file is included. Results from cycle and intersystem solid model transfer tests are presented, showing the practicality of the CAD1 proposal. B-rep model transfer results are discussed in some detail. Finally, the authors outline the relationship of this work with standardization
keywords	communication, solid modeling, standards, STEP, B-rep
series	CADline
last changed	2003/06/02 14:42

_id	6152
authors	Longhi, Domenico
year	1989
title	A System for Building Design Information Management
doi	https://doi.org/10.52842/conf.ecaade.1989.x.b7n
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.11.1-9.11.8
summary	Computer assistants to building process management are not able nowadays to efficiently work out the problems generated by the increased complexity of designing. Actual difficulties depend, on one hand, on the fact D.B.M.S. that have been developed on other environments than CAAD, and on the other hand, on the fact that architectural design process is scarcely formalized. At the Department of T.E.C.A., at the University of Rome, a PhD research program is aimed to overcome difficulties, working out techniques of information management based on Knowledge Engineering and particularly on Knowledge Base Management Systems and Expert Database Systems. At present a prototype system is being developed, that can manage existing technical information, connected with buiIding process.
keywords	Information Management, Data Base, Computer Assistants, BuiIding Process
series	eCAADe
last changed	2022/06/07 07:50

_id	a262
authors	Maher, Mary Lou, Zhao, F. and Gero, John S.
year	1989
title	An Approach to Knowledge-Based Creative Design
source	NSF Engineering Design Research Conference. PREPRINT. 1989. pp. 333-346. CADLINE has abstract only
summary	When considering the design process as a search through a design space, creative design occurs when the design space is expanded by adding knowledge from outside the space. A design space includes a state space, points which represent partial design descriptions, and operators that enable the process to move from one state to another. The design operators embody generalized design knowledge about classes of design solutions, i.e. prototypes. The authors' approach to knowledge- based creative design provides mechanisms for prototype adaptation and generation through analogy and mutation. This model is illustrated by creative solutions to building design problems. The implementation is discussed
keywords	synthesis, knowledge, representation, creativity, design process, prototypes, building, architecture, engineering
series	CADline
email
last changed	2003/06/02 10:24

_id	49a8
authors	McCall, R., Fischer, G. and Morch, A.
year	1990
title	Supporting Reflection-in-Action in the Janus Design Environment
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 247-259
summary	We have developed a computer-based design aid called Janus, which is based on a model of computer-supported design that we think has significance for the future of architectural education. Janus utilizes a knowledge-based approach to link a graphic construction system to hypertext. This allows the computer to make useful comments on the solutions that students construct in a CAD-like environment. These comments contain information intended to make students think more carefully about what they are doing while they are doing it. In other words, Janus promotes what Donald Schon has called "reflection-inaction" (Schon, 1983). The Janus design environment is named for the Roman god with a pair of faces looking in opposite directions. In our case the faces correspond to complementary design activities we call construction and argumentation. Construction is the activity of graphically creating the form of the solution e.g., a building. Traditionally this has been done with tracing paper, pencils, and pens. Argumentation is the activity of reasoning about the problem and its solution. This includes such things as considering what to do next, what alternative courses of action are available, and which course of action to choose. Argumentation is mostly verbal but partly graphical.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	56af
authors	Nakamae, E., Takao, I., Nishita, T. and Takita, S.
year	1989
title	Compositing 3D Images with Antialiasing and Various Shading Effects
source	IEEE Computer Graphics & Applications 9 no. 2: 21-29
summary	A method is proposed for compositing 3-D images produced by different programs, taking depth order into consideration. The method can add the following effects to composited images: antialiased images with scaling are displayed by a simple algorithm; the algorithm can add shading effects due to various types of light, such as area sources and skylight; and ray tracing can be performed in localized regions, producing realistic results without the computational expense of ray tracing the whole image. In addition to the above processes, such shading effects as fog and texture mapping can be processed with conventional methods. Thus, it becomes possible to display complex scenes with various shading effects, using relatively small computers. The multiscanning method used for antialiasing and a data structure for processing it are described. Examples are presented to demonstrate the capability of the system.
series	journal paper
last changed	2003/04/23 15:14

_id	6dc2
authors	Rahman, Shama
year	1989
title	The Realities of Introducing IT/CAD in Architectural and Interior Design Education: A Case Study at the Polytechnic of North London
doi	https://doi.org/10.52842/conf.ecaade.1989.x.j5h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.1.1.-4.1.9
summary	This paper is an attempt to illustrate the realities of introducing Information Technology at a school of Architecture and Interior Design. The department, under the auspicies of the Polytechnic of North London, comprises of 520 full/part time students working towards various professional and postgraduate degrees and diplomas in Architecture and Interior Design. For the last 18 months, the department has undertaken a rapid IT/CAD implementation programme. This has involved developing a strategy, formulating resource needs and implementing teaching. The strategy is based on the concept of application of IT as a tool for design and a medium for representation, management, use and exchange of design information. A course outline has been developed suggesting what could be taught and who could be taught what, how, when and for how long. At the same time, different types of teaching methods are being experimented upon. On the basis of these factors, attempts are being made to meet resource needs for software, hardware, teaching and technical support. Various issues and problems have been brought to light e.g. overcoming cost of hardware and software, lack of teaching and technical support, finding time slots in overloaded curriculums, changing existing attitudes towards IT,etc. We have approached these problems in various ways. We liaise closely with architects' offices, and try to use student skills and expertise within the polytechnic. We try to overcome time-slot problems by joint teaching and assessment with other subjects and try to integrate IT/CAD with studio-based design projects by locating computlng facilities inside studios. This paper is a story of how we have set for ourselves a path to follow. This path is by no means rigid and will continuously change with new experiences and the demands of a volatile industry. We have only just begun.
series	eCAADe
last changed	2022/06/07 07:50

_id	2db4
authors	Schmitt, Gerhard
year	1992
title	Design for Performance
source	New York: John Wiley & Sons, 1992. pp. 83-100 : ill. includes bibliography Design for performance describes a generative approach toward fulfilling qualitative and quantitative design requirements based on specification and existing cases. The term design applies to the architectural domain: the term performance includes the aesthetic, quantitative, and qualitative behavior of an artifact. In achieving architectural quality while adhering to measurable criteria, design for performance has representational, computational, and practical advantages over traditional methods, in particular over post-facto single- and multicriteria analysis and evaluation. In this paper a proposal for a working model and a partial implementation of this model are described. architecture / evaluation / performance / synthesis / design / representation / prediction / integration. Ô h)000*°° ÔŒ21. Schneekloth, Lynda H., Rajendra K. Jain and Gary E. Day. 'Wind Study of Pedestrian Environments.' February, 1989. 30, [2] p. : ill. includes bibliography and index.
summary	This report summarizes Part 1 of the research on wind conditions affecting pedestrian environments for the State University of New York at Buffalo. Part 1 reports on existing conditions in the main part of the North Campus in Amherst. Procedures and methods are outlined, the profile of the current situation reported, and a special study on the proposed Natural Science and Math Building are included
keywords	architecture, research, evaluation, analysis, simulation, hardware
series	CADline
last changed	1999/02/12 15:09

_id	7812
authors	Straber, W. and Seidel, H.-P. (eds.)
year	1989
title	Theory and Practice of Geometric Modeling
source	Springer-Verlag
summary	This book originates from the lectures given at the international conference "Theory and Practice of Geometric Modeling", Blaubeuren, FRG, October 3-7, 1988, that brought together leading experts from universities, system developers, and system users, to discuss new concepts and future trends in geometric modeling. The book covers a variety of topics on an advanced level and is organized as follows. Part A contains new algorithms and techniques for modeling objects that are bounded by free form surfaces. Part B focuses on surface/surface intersections, new types of blending surfaces and speed ups for ray tracing. Part C contains some new geometric tools. Part D discusses different representation schemes in solid modeling, conversions between these different schemes, and some applications. Part E covers some issues of product modeling, automatic tolerancing, high level specification of solid models (constraints, features) and the need for better user interfaces.
series	other
last changed	2003/04/23 15:14

_id	0d30
authors	Tzorbatzakis, E., Prince, R.G.H. and Gero, John S.
year	1989
title	Optimal LPG Station Layout for Planning Permission Using Expert Systems.
source	CHEMECA - 89, pp. 345-352.
summary	CADLINE has abstract only. An expert systems approach is adopted to modeling the control regulations governing the siting of LPG stations. Procedural programs are used to estimate risk. Symbolic representation of the regulations allows for more comprehendible checking of proposed layouts. Additional heuristics allow the layout to be modified to reduce defined societal risk. The system is implemented on SUN workstations using the BUILD expert system shell.
keywords	Expert Systems, Codes, Optimization, Planning, Layout, Floor Plans, Synthesis
series	CADline
email
last changed	2003/06/02 13:58

_id	660f
authors	Woo, Sungho and Sasada, Tsuyoshi
year	1998
title	Shared Virtual Space for Architectural Education
doi	https://doi.org/10.52842/conf.caadria.1998.291
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1989, pp. 291-298
summary	Our research in recent years has included the subject of providing co-operative work space in the field of architectural design. We propose raising the quality of architectural design by extending the physical space of the architectural laboratory into the virtual space of the network (i.e. Internet). In this paper, this extension is called Multi-user work space. The aim of this paper is to provide Multi-user work space with the feature of synchronous+asynchronous, bidirection and peer-to-peer+client-server, and to popularize architectural design by providing Multi-user work space with a seamless environment in time and space.
keywords	Collaborative Design, Virtual Space, Synchronous Communication
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:57

No more hits.