Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 181

Reformat results as: short short into frame detailed detailed into frame

_id	8257
authors	Rosenman, Michael A. and Gero, John S.
year	1989
title	SOLAREXPERT--An Expert System For Evaluating Passive Solar Energy Designs
source	Edinburgh: Civil Comp Press, 1989. pp. 131-139
summary	This paper describes SOLAREXPERT, an expert system to aid designers in passive solar energy design for single dwellings. The system operates at a strategic level to provide basic advice on the form of construction and types of passive solar systems and at a spatial zone level to provide more detailed advice on sizes and materials. It allows for modification of the information entered so that users may explore several possibilities
keywords	energy, design, expert systems, civil engineering, structures, housing
series	CADline
email
last changed	2003/06/02 13:58

_id	e6b2
authors	Rosenman, M.A., Gero, J.S. and Postmus, A.G. (et al)
year	1989
title	Development and Implementation of SOLAREXPERT--An Expert System to Aid the Passive Solar Design of Housing
source	Expert Systems in Engineering Applications International Conference Proceedings. 1989. China: Huazhong University of Science and Technology Press, pp. 16-22. CADLINE has abstract only
summary	This paper describes the design development and implementation of an expert system to aide the passive solar design of housing. The functional specifications and functional requirements are presented. The resulting system, SOLAREXPERT, is described, and conclusions drawn from the experience are presented
keywords	energy, design, expert systems, architecture
series	CADline
email
last changed	2003/06/02 14:41

_id	2b8f
authors	Colajanni, Benedetto and De Grassi, Mario
year	1989
title	Inferential Mechanisms to be Employed in CAAD: The Castorp System
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.1.1-7.1.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.c7m
summary	The paper presents an approach to the problems of architectural design aided by Artificial Intelligence techniques that can solve the difficulties related to combinatorial explosion, often encountered in the past. Three expert systems, dubbed "reasoners", capable of some elementary design work and a hypothesis for their interaction have been developed. Reasoner A has an "analogical" view of space. A notion of conflict, managed by means of fuzzy logic, has been introduced. It corresponds, in an intuitive and straightforward fashion, to the common notion of conflict or contradiction in real space as a consequence of improper overlapping of actual physical objects or of their functional pertinence. Reasoner B works on formalized models of building objects. It designs new patterns from given patterns taken as defaults. Reasoner C picks up from an archive of patterns the one which best suits a list of given goals. Design is the result of interaction between the three reasoners. Finally, the proposed schema raises questions about formal structures ("images") and about the nature of culturally-linked options ("memory") on which some preliminary considerations are made. Prototypes of the reasoners are operating at the Instituto di Edilizia of the University of Ancona, Italy.
series	eCAADe
last changed	2022/06/07 07:50

_id	e91f
authors	Mitchell, W.J., Liggett, R.S. and Tan, M.
year	1990
title	Top-Down Knowledge-Based Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 137-148
summary	Traditional computer drafting systems and three- dimensional geometric modeling systems work in bottom-up fashion. They provide a range of graphic primitives, such as vectors, arcs, and splines, together with operators for inserting, deleting, combining, and transforming instances of these. Thus they are conceptually very similar to word processors, with the difference that they operate on two- dimensional or three-dimensional patterns of graphic primitives rather than one-dimensional strings of characters. This sort of system is effective for input and editing of drawings or models that represent existing designs, but provides little more help than a pencil when you want to construct from scratch a drawing of some complex object such as a human figure, an automobile, or a classical column: you must depend on your own knowledge of what the pieces are and how to shape them and put them together. If you already know how to draw something then a computer drafting system will help you to do so efficiently, but if you do not know how to begin, or how to develop and refine the drawing, then the efficiency that you gain is of little practical consequence. And accelerated performance, flashier color graphics, or futuristic three-dimensional modes of interaction will not help with this problem at all. By contrast, experienced expert graphic artists and designers usually work in top-down fashion-beginning with a very schematic sketch of the whole object, then refining this, in step-by-step fashion, till the requisite level of precision and completeness is reached. For example, a figure drawing might begin as a "stick figure" schema showing lengths and angles of limbs, then be developed to show the general blocking of masses, and finally be resolved down to the finest details of contour and surface. Similarly, an architectural drawing might begin as a parti showing just a skeleton of construction lines, then be developed into a single-line floor plan, then a plan showing accurate wall thicknesses and openings, and finally a fully developed and detailed drawing.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e303
authors	Coyne, Richard D. and Newton, S.
year	1989
title	A Tutorial on Neural Networks and Expert Systems for Design
source	University of Sydney, 1989. pp. 321-337. CADLINE has abstract only
summary	This paper presents an overview of neural network (connectionist) systems and their potential contribution to computer-aided design. The authors discuss the appeal of neural networks and some of the problems. The major contribution to design is in the representation and manipulation of schemas. A neural network system can be 'taught' various examples (such as room descriptions). The system then apparently recognizes schemas (room types) and can produce novel but sensible combinations of descriptions constituting new types. A simple handworked example is presented, and the learning and reasoning mechanism is explained
keywords	representation, CAD, expert systems, design, neural networks
series	CADline
email
last changed	2003/05/17 10:13

_id	c3ec
authors	Coyne, Richard D. and Radford, Antony D.
year	1989
title	Knowledge-based Design Systems in Architecture : a Linguistic Perspective
source	Knowledge Based Systems in Architecture. Helsinki: Acta Polytechnica Scandinavica, 1989. pp. 27-36
summary	The separation of syntax and semantics in systems for the production of architectural designs is discussed. In producing designs we are less interested in mapping between buildings and their meaning than in mapping between an intended meaning and a design description of a kind that can be constructed, a mapping between semantic and syntactic realms. The thesis of this paper is that it is both feasible and operationally useful to separate the consideration of interpretation and syntactic generating in design. The authors first examine the possibility of operating in the syntactic realm, then the possibility of operating in the interpretative realm. Finally they examine how a design system might combine interpretative and syntactic systems
keywords	reasoning, design, CAD, architecture, knowledge base, semantics
series	CADline
email
last changed	2003/05/17 10:13

_id	e365
authors	Danahy, John
year	1989
title	Intuition & Computer Visualization in an Urban Design Studio
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.2.1-4.2.6
doi	https://doi.org/10.52842/conf.ecaade.1989.x.i5v
summary	This paper will present prototypical software being used in the teaching of urban design to students and for use by professionals in the early stages of a project. The system is intended to support a heuristic approach to design. That is, it supports a process of refining ideas and understandings through a process of trial and error. The support or aid to design comes in the form of a didactic real-time programme. Its power lies in its ability to provide instantaneous response to operations on the data that can allow one to develop three-dimensional spatial ideas in an intuitively driven manner. This condition appears to occur for both novice and expert computer operators. The presentation will present our experience to-date in using conventional computer graphic tools to represent design ideas and contrast it with a video demonstration of ow prototypical dynamic urban design modelling software for the Silicon Graphics IRIS computers.
keywords	Intuition, Visualization, Urban Design, Modelling, Real-Time
series	eCAADe
email
last changed	2022/06/07 07:50

_id	1a4e
authors	Goel, Ashok Kumar
year	1989
title	Integration of case-based reasoning and model-based reasoning for adaptive design problem solving
source	Ohio State University
summary	In the case-based approach to design, a novel problem is solved by adapting a design known to solve a related problem. Adapting a known design to solve a related problem by the commonly used methods of heuristic association and search, however, can be computationally expensive if the adaptation search space is not small. The adaptation space, then, needs to be decomposed into smaller and simpler spaces that can be searched more efficiently and effectively. The knowledge for decomposing the adaptation search space can be represented as a behavior-structure model that specifies how the structure of the known design results in its output behaviors. This research investigates the use of such behavior-structure models for adapting the designs of physical devices. Comprehension of how the output behaviors of a design arise from its structure is represented as a behavioral component-substance model for the design. The model explicitly specifies (i) the expected output behaviors of the design including its functions, (ii) the elementary structural and behavioral interactions between components and substances constituting the structure of the design, and (iii) the internal causal behaviors of the design that compose the elementary interactions into its output behaviors. The causal behaviors of the design, in this model, are indexed by the expected output behaviors for which they are responsible. The model aids case-based design in several ways. First, it identifies conceptual primitives for specifying the functions of designs, which are used to index the known designs stored in a case-based memory. Second, it identifies elementary types of behavior transformations and elementary types of structure modifications. Third, it provides knowledge for decomposition of the adaptation search space into smaller spaces so that the search for the needed structure modifications is localized. Fourth, it leads to a novel method for simulating the behavioral effects of structure modifications. The output and causal behaviors of the modified design, in this method, are derived by revising the output and causal behaviors of the known design. This integrative approach unifies case-based methods, associative methods, heuristic search methods, decomposition methods, and model-based methods into one architecture for adaptive design problem solving. Core portions of this approach have been implemented in an experimental design system called KRITIK.
keywords	Case Based Reasoning; Model Based Reasoning; Adaptive Design; Problem Solving
series	thesis:PhD
last changed	2003/02/12 22:37

_id	c0a3
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1989
title	Component Based Computer Aided Learning for Students of Architecture and Civil Engineering
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 193-208
doi	https://doi.org/10.52842/conf.acadia.1989.193
summary	The paper describes the methodology and the current efforts to develop an interdisciplinary computer aided learning system for architects and civil engineers. The system being developed incorporates a component oriented relational database with an existing interactive 3-dimensional modeling system developed in the School of Architecture and Planning at SUNY Buffalo. The software will be used in existing courses in architecture and civil engineering as a teaching aid to help students understand the complex 3-dimensional interrelationships of structural components. Initial implementation has focused on the modeling of the components and assemblies for a lowrise steel frame structure. Current implementation efforts are focusing on the capability to view connections in various ways including the ability to "explode" a connection to better understand the sequence of construction and load paths. Appropriate codes, limit states of failure and specific data will be linked to each specific component in an expert system shell so that the system can offer feedback about a student generated connection and perhaps offer other possible connections a library of standard connections. Future expansion of the system will include adding other "systems" of a building, such as mechanical, electrical, plumbing, enclosure etc., to help students visualize the integration of the various parts.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	765e
authors	Mumma, S.A. and Bolin, R.J.
year	1997
title	Energy optimized-ventilation constrained variable air volume system control
source	Automation in Construction 6 (5-6) (1997) pp. 463-470
summary	The analytical energy performance of an advanced energy optimized-ventilation constrained control approach to variable air volume systems was compared to four other controls. The other controls are either currently used or have been proposed in the literature. The advanced control demonstrated its potential to meet the ventilation requirements of ASHRAE Standard 62-1989 for every zone of the building with minimal energy consumption. The analytical work was carried out in a single story prototypical commercial building. The building was analyzed in five US cities to provide insight into the impact of climate on the performance of the advanced control. The advanced control consumed less total energy, considerably less in some cities, than the other four controls. The advanced control provides an excellent opportunity to apply to buildings new automation equipment and software never attempted before.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	0797
authors	Purnomo, H.
year	1989
title	SPACE - Generative Expert System: An Expert System for Designing a Layout of Single-Family Houses Using the Expansiva Building System
source	Department of Architectural and Design Science, University of Sydney
summary	This thesis describes an expert system for designing the layout of a single-family house using the Espansiva building system introduced by Jorn Utzon. The expert system uses two systems that are already available; the BUILD expert system shell as an automated reasoning system and the Eagle 3D modeler system for producing graphical output. Both programs run under the UNIX operating system on SUN microcomputers. The integration of BUILD, which is written in Prolog, with Eagle using one of the Eagle commands called 'weasel' is a major part of the implementation of the system. [Unpublished. -- CADLINE has abstract only.]
keywords	Expert Systems, Floor Plans, Synthesis, Layout, Applications, Languages, PROLOG
series	thesis:MSc
last changed	2002/12/14 19:12

_id	6743
authors	Retik, A
year	1989
title	Computer-Aided Design of Precast Building System
source	Proceedings of the International Conference on CAD/CAM and AMT. December, 1989. pp. 1-5 : some ill. includes bibliography
summary	The paper describes an expert system for computerized design of precast building components for a given architectural solution. The system receives the layouts and evaluations of the building as input, indicates the location of structural supports, breaks down the floors and walls into the elements to be prefabricated, and finally generates detailed production drawings for each element. Design stages are governed by the specific features of the prefabrications system to be employed. Design alternatives are also evaluated in the course of the process. The paper reviews the principles of the system and the particular features of the computer program employed for this purpose
keywords	building, layout, floor plans, structures, construction, design, details, expert systems, prefabrication
series	CADline
last changed	1999/02/12 15:09

_id	ecd3
authors	Shaviv, Edna
year	1989
title	A Direct Generative CAD Tool for the Site Layout of Communities With Solar Access to Each Building
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.17.1-9.17.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x6o
summary	A method for the design of communities with solar access to each building is presented. The method allows the determination of the minimum possible distance between the buildings that enables insolation, the maximum height allowed for a given building without violating the "Solar Rights" of its neighbors, and how low the window or the passive solar collector can be placed on the wall and still be insolated in winter. The fundamental idea is to use a computer and CRT to generate the entire envelope of the families of design solutions. These solutions provide the required open space between buildings to sustain the "Solar Rights" of the building under consideration. This envelope of solutions serves as a nomogram on the basis of which the location of each building in the solar communities is determined. The method creates an unlimited space of solutions, leaving the final design to the architect's imagination.
keywords	"Solar Rights", Solar Radiation, Solar Communities, Computer-Aided Architectural Design, Design Tools
series	eCAADe
email
last changed	2022/06/07 07:50

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	03f1
authors	Smeltzer, Geert T.A.
year	1989
title	A CAAD Curriculum
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.5.1-5.5.12
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f8c
summary	This paper is about the backgrounds, the present state, the results and the future expectations of the curriculum of Calibre, at the Faculty of Architecture and Building Science of the Eindhoven University of Technology. It will also touch upon the relationships with project work in our field but also in other fields of our Architectural (and Building) education. In the paper it is emphasised that teachers need to create a need for the use of certain features of computer systems. To make students aware of the (possible) CAD needs and answering to those needs at a more or less individual way asks a high level of understanding of the underlying concept and features of the CAD systems. Because of the flexibility (amongst other qualities), we, and so many others, have made a choice to use AutoCAD as 8 kind of thread that runs through our curriculum continuously and that exists out of 6 main parts. These parts vary from an introduction to Integrated Data Processing via CADD, Graphics and Data Structures and Expert Systems to System Development Methods. Half of our curriculum Is compulsory for all the faculty students, the other half is facultative but very well attended.
series	eCAADe
last changed	2022/06/07 07:50

_id	0d30
authors	Tzorbatzakis, E., Prince, R.G.H. and Gero, John S.
year	1989
title	Optimal LPG Station Layout for Planning Permission Using Expert Systems.
source	CHEMECA - 89, pp. 345-352.
summary	CADLINE has abstract only. An expert systems approach is adopted to modeling the control regulations governing the siting of LPG stations. Procedural programs are used to estimate risk. Symbolic representation of the regulations allows for more comprehendible checking of proposed layouts. Additional heuristics allow the layout to be modified to reduce defined societal risk. The system is implemented on SUN workstations using the BUILD expert system shell.
keywords	Expert Systems, Codes, Optimization, Planning, Layout, Floor Plans, Synthesis
series	CADline
email
last changed	2003/06/02 13:58

_id	a682
authors	Wong, P.C.
year	1989
title	EXPAN--An Integrated System for the Generation of Prefabricated Panel Wall Layout Design
source	Department of Architectural Science, University of Sydney
summary	This thesis develops an integrated system to demonstrate the capabilities of those systems in aiding preliminary design. An existing CAD system, the Eagle modeling system, is used to control the graphic generation of the preliminary design. Some knowledge is written in a macro language conforming to the Eagle syntax requirements. An expert system shell written in C, the EXBUILD expert system shell, is used to control the expert system. The knowledge used by the expert system is written in production rules and frames conforming to the EXBUILD syntax requirements. The control over the whole system is primarily through Eagle with the integrated system running within the Eagle environment.
keywords	Automation; Integration; Expert Systems; Applications; Prefabrication
series	thesis:MSc
last changed	2002/12/14 19:14

_id	82b9
authors	Beyers, Robert and Desa, Subhas
year	1989
title	Design of Control Systems for Performance : A Constraint Mapping Approach
source	17 p. : ill Engineering Design Research Center, CMU, October, 1989. EDRC 24-10-89. includes bibliography.
summary	Simple s-plane maps are used to graphically reveal interactions of performance requirements and constraints thus providing a control system designer insight into performance trade-offs. Two well-known but powerful ideas underlie this approach: (a) the characteristic equation of an nth-order system can be fully described by the specification of n variables and (b) any dynamic performance requirement or constraint can be expressed in terms of 2n variables of which n describe the open-loop and n describe the closed-loop characteristic equations. An example illustrates the application of the approach to controller design
keywords	constraints, engineering, control, systems, design, performance
series	CADline
last changed	2003/06/02 13:58

_id	6a30
authors	Bonn, Markus
year	1989
title	Modeling Architectural Forms through Replacement Operations
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 103-130
doi	https://doi.org/10.52842/conf.acadia.1989.103
summary	Replacement operations, where an element at any topological level may be replaced by another element at the same or different topological level, are defined. Their potential as design tools which may be incorporated in a CAD system is investigated and demonstrated through the experimental implementation of two such operations in MARCOS, a Modeling Architectural Compositions System. MARCOS has been written in C. It is highly interactive and runs on an Apple Macintosh IIx. The two operations which have been implemented are the face -> volume and volume -> volume replacements. They were chosen for their potential as generators of architectural forms. Examples of architectural compositions produced through the use of replacement operations are also illustrated.
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: