Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 204

Reformat results as: short short into frame detailed detailed into frame

_id	cdd3
authors	Mitchell, William J.
year	1990
title	A New Agenda For Computer-Aided Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 1-16
summary	Design is the computation of shape information that is needed to guide fabrication or construction of an artifact. This information normally specifies artifact topology (connections of vertices, edges, surfaces, and closed volumes), dimensions, angles, and tolerances on dimensions and angles. There may also be associations of symbols with subshapes to specify material and other such properties. The process of design takes different forms in different contexts, but the most usual computational operations are transformations (unary operations) and combinations (binary operations) of shapes in a two-dimensional drawing or a three-dimensional geometric model. An initial vocabulary of shapes, together with a repertoire of shape transformation and combination operators., establishes the shape algebra within which the computation takes place. The computation terminates successfully when it can be shown that certain predicates are satisfied by a shape produced by recursively applying the transformation and combination operators to the initial vocabulary. These predicates are usually stated in symbolic (verbal or numerical) form. Thus determination of whether a predicate is satisfied usually involves producing a numerical or verbal interpretation of a drawing, then deriving inferences from this interpretation by applying rules or formulae.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e8fe
authors	Nagakura, Takehiko
year	1990
title	Shape Recognition and Transformation: A Script-Based Approach
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 149-170
summary	Design evolves. Architects deploy considerable knowledge to develop their designs from one stage to the next. Drawings play a major role in describing the 11 state" of design at each stage; however, they do not explicitly reveal the knowledge used to achieve the design, for the knowledge is concealed in the "process" between these stages rather than in the drawings themselves. This process involves parametric and schematic transformations as well as perception of unanticipated possibilities emerging from the drawings in progress. To make an impact on design, CAD must address these issues of design knowledge, but so far its focus has been instead on drawings as relatively static collections of graphic primitives. This paper introduces the concepts of shapes and shape transformation as fundamental aspects of design knowledge. It is implemented on a computer program in the form of a prototype shape-scripting language. In summary, this language works as a shell to encode a set of shape categories and their transformations, and it enables progressive shape recognition and shape transformation in line drawings. An appropriate set of these encoded transformations may represent a body of syntactic knowledge about an architectural style. This opens up the exciting possibility of a computational implementation of a shape grammar.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	8bf3
authors	McCullough, M., Mitchell, W.J. and Purcell, P. (Eds.)
year	1990
title	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [Conference Proceedings]
source	International Conference on Computer-Aided Architectural Design 1989/ ISBN 0-262-13254-0] (Massachusetts / USA), 1989, 505 p.
summary	Design is the computation of shape information that is needed to guide fabrication or construction of artifacts. But it is not so straightforward as, say, the computation of numerical information required to balance a checkbook. This is partly because algebras of shapes are not as well understood and precisely formalized as algebras of numbers, partly because the rules for carrying out shape computations tend to be fluid and ill defined and partly because the predicates that must be satisfied to achieve successful termination are often complex and difficult to specify. For centuries architects have carried out shape computations by hand, using informal procedures and the simplest of tools. Over the last two decades though, they have made increasing use of more formal procedures executed by computers. It is still too early to be sure of the gains and losses that follow from this development, but there is no doubt that it raises some challenging questions of architectural theory and some perplexing issues for those concerned with the future of architectural education. This book frames those issues and provides a diversity of perspectives on them. Its contents were initially presented at the CAAD Futures 89 Conference-an international gathering of researchers and teachers in the field of computer-aided architectural design which was jointly sponsored by the Harvard Graduate School of Design and the MIT Department of Architecture and held in Cambridge, Massachusetts, in July 1989. There are four major sections: Theoretical Foundations, Knowledge-Based Design Tools, Information Delivery Systems, and Case Studies: Electronic Media in the Design Studio. In a representative collection of current views, over thirty extensively illustrated papers discuss the experiences of universities in the USA, Europe, Japan, Israel, Canada, and Australia, articulate present theoretical and practical concerns, provide criticism of media and methods, and suggest directions for the future. Architectural educators and architects concerned with the effect of computer technology on the design process will find here an indispensable reference and a rich source of ideas. This book was itself prepared in an electronic design studio. Composition and typography, most image collection and placement, and such editing as was practical within this publishing format, were all performed digitally using Macintosh computers at the Harvard Graduate School of Design during a period of a few weeks in 1989.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8a0c
authors	Tan, Milton
year	1990
title	Saying What It Is by What It Is Like - Describing Shapes Using Line Relationships
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 201-213
summary	Shapes - taken as well-defined collections of lines - are fundamental building blocks in architectural drawings. From doodles to shop drawings, shapes are used to denote ideas and represent elements of design, many of which ultimately translate into actual objects. But because designs evolve, the shapes representing a design are seldom static - instead, they are perpetually open to transformations. And since transformations involve relationships, conventional methods of describing shapes as sets of discrete endpoints may not provide an appropriate foundation for schematic design. This paper begins with a review of the perception of shapes and its significance in design. In particular, it argues that juxtapositions and inter-relationships of shapes are important seedbeds for creative development of designs. It is clear that conventional representation of shapes as sets of discrete lines does not cope with these -emergent" subshapes; the most basic of which arise out of intersecting and colinear lines. Attempts to redress this by using ‘reduction rules’ based on traditional point-and-line data structures are encumbered by computational problems of precision and shape specification. Basically, this means that some ‘close’ cases of sub-shapes may escape detection and their specifications are difficult to use in substitution operations. The paper presents the findings of a computer project - Emergence II - which explored a 'relational' description of shapes based on the concept of construction lines. It builds on the notion that architectural shapes are constructed in a graphic context and that, at a basic compositional level, the context can be set by construction lines. Accordingly, the interface enables the delineation of line segments with reference to pre-established construction lines. This results in a simple data structure where the knowledge of shapes is centralized in a lookup table of all its construction lines rather than dispersed in the specifications of line segments. Taking this approach, the prototype software shows the ease and efficiency of applying ‘reduction rules’ for intersection and colinear conditions, and for finding emergent sub-shapes by simply tracking the construction lines delimiting the ends of line segments.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	a495
authors	Kalay, Yehuda E.
year	1989
title	The Hybrid Edge : A Topological Data Structure for Vertically Integrated Geometric Modeling
source	Computer Aided Design. April, 1989. vol. 21: pp. 129-139 : ill. includes bibliography
summary	Generalizing the computational geometric support for the representation of designed artifacts over multiple different levels of symbolic abstraction (e.g., sketches, solid modeling, and drafting) is discussed. First, the need for integrating the representation and manipulation of points, lines, polygons and solids for the purpose of facilitating the design of artifacts at many levels of design abstractions established. Second, a vertically integrated model that supports the representation and manipulation of points, lines, polygons, and solids without redundancy, is presented. The particular roles of the operators and the operandi are discussed, along with their hierarchical integration. The utility of the model is demonstrated in performing operations that involve multiple different levels of data abstraction, such as splitting solids at an arbitrary polygon inscribed on their boundary. Finally, a particular implementation of the integrated model is presented. This implementation is based on the Hybrid Edge, a derivative from Baumgart's Winged Edge and Eastman's Split Edge models. The Hybrid Edge distinguishes between the roles of edges as topological adjacency information carriers and their role as carriers of directionality information. This distinction permits the Hybrid Edge to handle the different combinations of adjacency and directionality requirements imposed by different abstraction levels in the integrated model
keywords	geometric modeling, hybrid edge, topology, solid modeling, B-rep
series	CADline
email
last changed	2003/05/17 10:18

_id	0565
authors	Oxman, Robert and Oxman, Rivka
year	1990
title	The Computability of Architectural Knowledge
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 171-185
summary	In an important contribution to the theoretical foundation of design computing, Mitchell noted "an increasingly urgent need to establish a demonstrably sound, comprehensive, rigorously formalized theoretical foundation upon which to base practical software development efforts" (Mitchell, 1986). In this paper we propose such a theoretical framework. A basic assumption of this work is that the advancement of design computing is dependent upon the emergence of a rigorous formulation of knowledge in design. We present a model of knowledge in architectural design which suggests a promising conceptual basis for dealing with knowledge in computer-aided design systems. We require models which can represent the formal knowledge and manipulative operations of the designer in all of their complexity-that is formal models rather than just geometric models. Shape Grammars (Stiny,1980) represent an example of such models, and constitute a relatively high level of design knowledge as compared to, for example, use of symmetry operations to generate simple formal configurations. Building upon an understanding of the classes of design knowledge as the conceptual basis for formal modeling systems may contribute a new realization of the potential of the medium for design. This will require a comprehensive approach to the definition of architectural and design knowledge. We consider here the implications of a well-defined body of architectural and design knowledge for design education and the potential mutual interaction-in a knowledge-rich environment-of design learning and CAAD learning. The computational factors connected with the representation of design knowledge and its integration in design systems are among the key problems of CAAD. Mitchell's model of knowledge in design incorporates formal knowledge in a comprehensive, multi-level, hierarchical structure in which types of knowledge are correlated with computational concepts. In the main focus of this paper we present a structured, multi-level model of design knowledge which we discuss with respect to current architectural theoretical considerations. Finally, we analyze the computational and educational relevance of such models.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4cf3
authors	Kalay, Yehuda E.
year	1989
title	Modeling Objects and Environments
source	xix, 402 p. : ill. New York: Wiley, 1989. includes a short bibliography and index. Part of the Principles of Computer Aided Design series. --- See also review by Patricia G
summary	McIntosh, in ACADIA Newsletter Vol. 9 No. 3 pp 20-23, June 1990. This book introduces the concept of modeling objects in the computer's memory so it can be used to aide the process of their design. Modeling is defined as an hierarchical abstraction of data and operators to manipulate it, subject to semantic integrity constraints that guarantee the realizability of the designed artifact in the real world. Starting with general concepts of modeling, the book moves on to discuss the modeling of shapes (form) in two and in three dimensions. The discussion covers both topology and geometry. Next the book introduces the concept of shape transformations (translation, scaling, rotation, etc.), both in absolute and in relative terms. The book then introduces the concept of assembly modeling, and adds non-graphical attributes to the representation. It concludes with a discussion on user interface and parametrization. The book includes many examples written in Pascal that complement the theory, and can be used as a basis for building a geometric modeling engine. It also includes exercises, so it can be used as a text book for a two-semester advance course in geometric modeling
keywords	CAD, data structures, solid modeling, abstraction, polygons, solids, boolean operations, transforms, computer graphics, user interface, parametrization, B-rep, polyhedra, objects, PASCAL
series	CADline
email
last changed	2003/06/02 13:58

_id	4bf3
authors	Blinn, James F.
year	1989
title	Optimal Tubes
source	IEEE Computer Graphics and Applications. September, 1989. vol. 9: pp. 8-13 : ill. (some col.)
summary	The author discusses how to cut down the number of polygons required to model and render the Voyager spacecraft. The geometric problem is to find the tangent lines from a point to a circle. There are two ways to go about solving this, one using garden-variety analytical geometry and the other using high tech homogeneous coordinates. The author in this column discusses the simple way
keywords	programming, geometry, algorithms, computer graphics, techniques
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	e33a
authors	De Cola, S., De Cola, B. and Pentasuglia, Francesco
year	1990
title	Messina 1908: The Invisible City
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 239-246
summary	The initial purposes of this work were to build a 3D model of the old city of Messina and to reconstruct a walk through it; to understand the "Ghost city," the parts that form it, and the rules of its plan, which are explicit in some cases but hidden most of the time; to measure its space, appreciate the similarities to and differences from modern city plans, and use the information to improve the plans of tomorrow. It might seem a useless study of a nonexistent city, and yet during the months of detailed work, of patient reconstruction from the surveys and photographs of the city destroyed in 1908, we began to consider how it was still possible to obtain spatial values of and to project behaviors in the lost city, in other words, to practice tests on memory that are very interesting for people working in a context in which memory no longer exists. The work presented here is the first stage of a more complex research project still to be carried out on Messina as it was at the end of the nineteenth century. Here we constructed a 3D model of some parts of the city prior to the earthquake of 1908 and made a five-minute video, using cartoon techniques, of an "impossible" walk through the city. The fragments of the city were reconstructed from available documentary sources, primarily photographic images, which tended to be of the most important places in the city.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	a8b7
authors	De Grassi, Mario and Di Manzo, Mauro
year	1989
title	The Design of Buildings as Changes of Known Solutions: A Model for “Reasoner B” ; Reasoner B" in the Castorp System
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.3.1-7.3.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.u3h
summary	The paper presents a study aimed at the modelization of a design operation of perturbation of an architectural framework in order to comply with a series of given design specifications. A formalized representation of the building object is assumed, Artificial Intelligence techniques are adopted to work on it. It is assumed that the computer carries out deformations starting from one of these structures in order to attain to a solution consistent with project specifications. A description of the structures employed for the representation of the building body (matroids) is firstly proposed. A planning theme is then assumed, as an example, whose main feature is to maintain the outer perimeter of a dwelling, to change its internal distribution in such a way as to resemble as closely as possible to the original and yet meaningfully alter its typology.
series	eCAADe
type	normal paper
last changed	2022/06/07 07:50

_id	0f73
authors	Ervin, Stephen M.
year	1990
title	Designing with Diagrams: A Role for Computing in Design Education and Exploration
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 107-122
summary	Environmental designers, design educators and design students using computers are a constituency with a set of requirements for database structure and flexibility, for knowledge representation and inference mechanisms, and for both graphical and non-graphical operations, that are now articulatable and to-date largely unmet. This is especially so in the area called 'preliminary' or 'schematic' design, where our requirements are related to, but different from, those of our colleagues in mechanical and electrical engineering, whose needs have dominated the notable developments in this area. One manifestation of these needs is in the peculiar form of graphics called diagrams , and the ways in which environmental designers (architects, landscape architects., urban designers) use them. Our diagrams are both similar to and different from structural, circuit, or logical diagrams in important ways. These similarities and differences yield basic insights into designing and design knowledge, and provide guidance for some necessary steps in the development of the next generation of CAD systems. Diagrams as a form of knowledge representation have received little scrutiny in the literature of graphic representation and computer graphics. In the following sections I present an overview of the theoretical basis for distinguishing and using diagrams; examine some of the computational requirements for a system of computer-aided diagramming; describe a prototype implementation called CBD (Constraint Based Diagrammer) and illustrate one example of its use; and speculate on the implications and potential applications of these ideas in computer-aided design education.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	22ed
authors	Glaser, Migges M.
year	1989
title	ART + COM Lab Report - BERKOM Project "New Media in Urban Planning"
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 6.1.1-6.1.6
doi	https://doi.org/10.52842/conf.ecaade.1989.x.l1t
summary	The highly developed glasfiber technology of the Berlin ISDN-B prototype network will make it possible to test a future benefit of the possibilities of real time visual communication for architects and planers in their home office. In the project an external user will be able to share high end visual outputs of a Service Center for Visualisation with his own low end CAAD workstation via ISDN-B. The capabilities of these services will range from a still picture archive, real time access to video film archive, a variety of conventional database services to special postproduction for his own 3D data models. The transferred 3D model can be rendered an animated on the Center's systems, if requested also integrated into a video background film. The production will than be available on his workstation screen. These new means will be evaluated in the view of the architects new possibilities for the design process.
keywords	Multimedia, CAAD Services, Computer Animation
series	eCAADe
last changed	2022/06/07 07:50

_id	f4fb
authors	Karasick, Michael
year	1989
title	On the Representation and Manipulation of Rigid Solids
source	McGill University, Department of Computer Science, Montreal
summary	Solid modeling studies how to represent geometric properties of solids by computer. A fundamental operation is the construction of representations of solids. Algorithms for set operations construct boundary representations of solids from boundary representations of other solids. A correct and efficient intersection algorithm for polyhedral solids that uses boundary representations is described. A finite-precision implementation of the algorithm uses incidence tests that use symbolic inference in order to limit errors due to finite-precision approximations. The incidence tests are described and experimental evidence is presented to show that the incidence tests are both empirically reliable and practical. The intersection algorithm uses a new boundary representation called the Star-Edge representation. A complementation algorithm for solids that uses the new representation is given, and an algorithm is given that uses the new representation to determine if two boundary representations describe the same solid. A canonical boundary representation for solids is described and used to prove a lower bound for the same-object problem.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	a87a
authors	Kroszynski, U.I., Palstorem, Bj. and Trostmann, E. (et al)
year	1989
title	Geometric Data Transfer Between CAD Systems : Solid Models
source	IEEE Computer Graphics and Applications September, 1989. vol. 9: pp. 57-71 : ill. includes bibliography.
summary	The CAD/CAM community is showing great interest in the development of data exchange standards. This article highlights some aspects of the work accomplished during the first phase of the ESPRIT project CAD1. Part of this work has resulted in a specification for the exchange of solid models, as well as in some pilot implementations of processors based on this specification. This work also contributes to the efforts of the International Standards Organization (ISO) in developing the Standard for the Exchange of Product Model Data (STEP). The authors present a summary of the CAD1 approach, addressing the structure of neutral files for solids, entities, and attributes supporting three kinds of representations; facilities for the transfer of parametric designs; referencing library components; and other general mechanisms. Also is described the current state of the specification and processor implementations. An example of a CAD1 neutral file is included. Results from cycle and intersystem solid model transfer tests are presented, showing the practicality of the CAD1 proposal. B-rep model transfer results are discussed in some detail. Finally, the authors outline the relationship of this work with standardization
keywords	communication, solid modeling, standards, STEP, B-rep
series	CADline
last changed	2003/06/02 14:42

_id	acadia06_079
id	acadia06_079
authors	Kumar, Shilpi
year	2006
title	Architecture and Industrial Design A Convergent Process for Design
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 79-94
doi	https://doi.org/10.52842/conf.acadia.2006.079
summary	The use of technology has grown with the way design professions have evolved over time. Changing needs, desires of comfort, and perceptions of the consumers have led to a distinct improvement in the design of both product and architecture. The use of the digital media and emerging technologies has brought a dramatic change to the design process allowing us to view, feel, and mould a virtual object at every stage of design, development, and engineering. Change is often quick and easy since a virtual product does not inherently carry the biases of its physical counterpart. In order to communicate ideas across the team, digital processes are also used to bring together opinions, experiences, and perspectives. These methods encourage decision making based on information rather than prejudice or instinct. Thus, digital exchanges (technology) impact firm strategies at three levels: product, process, and administrative or support activities (Adler 1989).Digital tools for design exchange in Industrial Design (ID) began much earlier than many other professions. The profession of Architecture is also slowly moving to a similar model with digital exchange finding increasing prevalence in drawing, modeling, performance simulation, design collaboration, construction management, and building fabrication. The biggest problem is the disintegrated use of technology in the architectural profession without a strategy toward streamlining the design process from conception to fabrication. In this paper we investigate how the use of technology has evolved in the professions of Industrial Design and Architecture comparatively in their product, process, and support activities. Further, we will present a set of guidelines that will help architects in the convergence of design process, helping in a more efficient work flow with a strategic use of digital technology.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	315caadria2004
id	315caadria2004
authors	Kuo-Chung Wen, Wei-Lung Chen
year	2004
title	Application of Genetic Algorithms to Establish Flooding Evacuation Path Model in Metropolitan Area
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 557-570
doi	https://doi.org/10.52842/conf.caadria.2004.557
summary	This research has shown the difficulties associated with the GIS and the flooding evacuation path search through the huge searching space generated during the network analysis process. This research also presents an approach to these problems by utilizing a search process whose concept is derived from natural genetics. Genetic algorithms (GAs) have been introduced in the optimization problem solving area by Holland (1975) and Goldberg (1989) and have shown their usefulness through numerous applications. We apply GA and GIS to choice flooding evacuation path in metropolitan area in this study. We take the region of Shiji city in Taiwan for case. That could be divided into four parts. First, is to set the population of GA operation. Second, is to choose crossover and mutation. Third, is to calculate the fitness function of each generation and to select the better gene arrangement. Fourth, is to reproduce, after evolution, we can establish Flooding Evacuation Path that more reflect really human action and choice when flood takes place. However we can apply GA to calculate different evacuation path in different time series. Final, we compare and establish real model of evacuation path model to choosing flooding evacuation path.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2008_66_session6b_544
id	caadria2008_66_session6b_544
authors	Lowe, Russell
year	2008
title	Beyond the boundary object: sketches, computer games and blogs facilitating design development
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 544-551
doi	https://doi.org/10.52842/conf.caadria.2008.544
summary	Developing Frosts’ understanding of Leigh Star’s (Star 1989) concept of the boundary object this paper seeks to answer the question “would multiple boundary objects employed simultaneously facilitate design development?” The paper reflects on and critically reviews the design, implementation, and outcomes of a first year Architectural Design course that privileged architectural representation in the form of design sketches, blogs and contemporary computer gaming technology. The review process is supported by an in depth survey of students experiences both prior to and during the course. With a large number of students enrolled in the course (158) the findings from this survey can be seen to offer a statistical reliability which is in contrast to the more usual anecdotal approach.
keywords	Boundary Object, Generalist, Specialist, Sketch, Computer Game, Blog
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	a68b
authors	Mackenzie, C.A.
year	1989
title	Inferring Relational Design Grammars
source	Environment and Planning B. 1989. vol. 16: pp. 252-287
summary	The hierarchical structure afforded by linguistic systems, together with inter-element relationships, is suggested as a means of representing interpretations of generative design processes. The utility of relational descriptions for describing spatial arrangements and performing geometric transformations is discussed. Tree systems are shown to be a useful representation for relational descriptions, by making explicit the possible hierarchical organizations, and a search mechanism is introduced to look for 'interesting' design interpretations. A method for inferring tree automata from positive sample sets is employed to infer relational grammars. Issues in the representation and the grammatical inference method are discussed in the light of examples from the domain of spatial configuration
keywords	inference, shape grammars, design, synthesis, relations, search
series	CADline
last changed	2003/06/02 13:58

For more results click below: