Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 202

Reformat results as: short short into frame detailed detailed into frame

_id	a672
authors	Flemming, Ulrich
year	1990
title	Syntactic Structures in Architecture: Teaching Composition with Computer Assistance
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 31-48
summary	The present paper outlines a plan for the teaching of architectural composition with computer assistance.The approach is to introduce students to a series of architectural languages characterized by a vocabulary of elements and a grammar whose rules indicate how these elements can be placed in space. Exercises with each language include the analysis of precedents; the generation of forms using a given rule set; and follow-up studies with an expanded rule set. The paper introduces languages and exercises through illustrative examples. This architectural content can be taught in the traditional way. The use of computers is motivated by expectations which are stated, and some basic requirements for the needed software are listed. Work to develop this software has started.
series	CAAD Futures
email
last changed	2003/02/26 17:24

_id	29b6
authors	Oxman, Rivka
year	1990
title	Architectural Knowledge Structures as "Design Shells": A Knowledge-Based View of Design and CAAD Education
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 187-199
summary	The concept of a knowledge based design shell is proposed as a basis for teaching design. The significance of the concept of design shell is discussed with respect to formalization, implementation, application and operation. GPRS-a generative prototype refinement design shell-is proposed, defined and elaborated. A plan type is introduced as one significant kind of structure of knowledge in architectural design is introduced. A method for representing syntactic and the semantic content to be used in design refinement is proposed. The method exploits the characteristics of both rules and frames, and integrates them in a prototype-based design system. This is demonstrated in a system called PRODS. Finally, the significance of such an approach in teaching is discussed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	417a
authors	Cipriani, R., Lagomarsino, A.D., Stagnaro, A., Valenti, E. and Sambolino, T.
year	1990
title	Some Years' Experience Teaching CAAD
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 347-361
summary	In the conventional way of teaching architecture, it is common to think of design as the final synthesis of an intellectual process (composizione in Italian) integrating different elements from different curriculum subjects: history, structural analysis., technology, regional and urban planning, and so on. These elements, being comprehensive of their specific domains, together build the project. This process is supported by a long traditional that cannot easily be modified; however, we must not consider it to be the only one. Architectural practice should be much more. The Scuole di Architettura has walked a long and difficult road in the last thirty years., with a significant widening of interest in social, political, and economic issues. There have been recurring attempts at epistemological reformulation in some areas. There has been an acknowledgment of a crisis in contemporary town planning and a dimming of several certitudes that had developed with the birth and growth of the modernist school. And there has been a weakening of the promises that had given life to the vigorous discussion about town and regional planning. All of this leads to a reconsideration of the meaning and the deeper assumptions that the project implies, a question mark at the center of the human sciences that architectural practice involves. The old tradition., which assigned composition a central role in the project, is no longer sufficient because it is related to a reductive reading of epistemology that views human sciences as defining segments of physical knowledge of the actual world. Contemporary reflection on the difference between understanding and unfolding, together with the attention given to interpreting a moment as compared to purely describing one, gives to the project the task of inquiry instead of solution.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	ab63
authors	Gross, Mark D.
year	1990
title	Relational Modeling: A Basis for Computer-Assisted Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 123-136
summary	Today's computer assisted design (CAD) systems automate traditional ways of working with tracing paper and pencil, but they cannot represent the rules and relationships of a design. As hardware becomes faster and memory less expensive, more sophisticated fundamental software technologies will be adopted. This shift in the basis of CAD will provide powerful capabilities and offer new ways to think about designing. Recently parametric design, a technique for describing a large class of designs with a small description in code, has become a focus of attention in architectural computing. In parametric CAD systems, design features are identified and keyed to a number of input variables. Changes in the input values result in variations of the basic design. Based on conventional software technologies, parametric design has been successfully applied in many design domains including architecture and is supported by several commercial CAD packages. A weakness of parametric techniques is the need to predetermine which properties are input parameters to be varied and which are to be derived. Relational modeling is a simple and powerful extension of parametric design that overcomes this weakness. By viewing relations as reversible rather than one-way, any set of properties can be chosen as input parameters. For example, a relational model that calculates the shadow length of a given building can also be used to calculate the building height given a desired shadow length. In exercising a relational model the designer is not limited to a pre-selected set of input variables but can explore and experiment freely with changes in all parts of the model. Co is a relational modeling environment under development on the Macintosh-II computer, and Co-Draw, a prototype CAD program based on Co. Co's relationaI engine and object-oriented database provide a powerful basis for modeling design relations. Co-Draw's interactive graphics offer a flexible medium for design exploration. Co provides tools for viewing and editing design models in various representations, including spreadsheet cards, tree and graph structures, as well as plan and elevation graphics. Co's concepts and architecture are described and the implications for design education are discussed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	03f1
authors	Smeltzer, Geert T.A.
year	1989
title	A CAAD Curriculum
doi	https://doi.org/10.52842/conf.ecaade.1989.x.f8c
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.5.1-5.5.12
summary	This paper is about the backgrounds, the present state, the results and the future expectations of the curriculum of Calibre, at the Faculty of Architecture and Building Science of the Eindhoven University of Technology. It will also touch upon the relationships with project work in our field but also in other fields of our Architectural (and Building) education. In the paper it is emphasised that teachers need to create a need for the use of certain features of computer systems. To make students aware of the (possible) CAD needs and answering to those needs at a more or less individual way asks a high level of understanding of the underlying concept and features of the CAD systems. Because of the flexibility (amongst other qualities), we, and so many others, have made a choice to use AutoCAD as 8 kind of thread that runs through our curriculum continuously and that exists out of 6 main parts. These parts vary from an introduction to Integrated Data Processing via CADD, Graphics and Data Structures and Expert Systems to System Development Methods. Half of our curriculum Is compulsory for all the faculty students, the other half is facultative but very well attended.
series	eCAADe
last changed	2022/06/07 07:50

_id	8775
authors	Cigolle, Mark and Coleman, Kim
year	1990
title	Computer Integrated Design: Transformation as Process
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary	To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	2613
authors	Frew, Robert S.
year	1990
title	The Organization of CAD Teaching in Design Schools
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 387-392
summary	This paper is the result of a survey of European CAD teaching that was conducted in 1987 and 1988. It makes comparisons with teaching at the Yale School of Architecture, and goes on to analyze the issues that should be addressed in a CAD program in a school of architecture.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8cff
authors	Fridqvist, Sverker
year	1989
title	Computers as a Creative Tool in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1989.x.k1l
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.6.1-9.6.4
summary	The School of Architecture at Lund Institute of Technology was augmented by the establishment of the Computer Studio in 1987. As a result the school now has a device for teaching and research in the architects' use of computers. We are now conducting several research projects as well as courses and an education project. The third and fourth years of the education at the school of architecture are arranged as education projects instead of traditional lecturing. The students choose from projects that are organised by different departments at the School of Architecture. The issue is that the students will ask for instruction when felt needed, and that learning will therefore be more efficient. The Computer Studio has conducted such a project during the first half of 1989. We have tried to encourage the students to use our different computers and programs in new and creative ways. One of the issues of the computer project is to teach the students how computers are used at the architects offices today as well as expected future developments. The students shall be acquainted well enough with present and future possibilities to make good choices when deciding upon buying computers for architectural use. Another issue is to develop new ways of making and presenting architecture by using computers. As a group the teachers at the school of architecture have a very restrictive attitude towards the use of computers. We hope that our project will open their minds for the possibilities of computers, and to engage them in the development of new ways to use computers creatively in architecture. An interesting question is if the use of computers will yield different outcomes of he students' work than traditional methods. An object for research is whether the added possibilities of considering different aspects of he design by using a computer will make for higher quality of the results.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	c0a3
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1989
title	Component Based Computer Aided Learning for Students of Architecture and Civil Engineering
doi	https://doi.org/10.52842/conf.acadia.1989.193
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 193-208
summary	The paper describes the methodology and the current efforts to develop an interdisciplinary computer aided learning system for architects and civil engineers. The system being developed incorporates a component oriented relational database with an existing interactive 3-dimensional modeling system developed in the School of Architecture and Planning at SUNY Buffalo. The software will be used in existing courses in architecture and civil engineering as a teaching aid to help students understand the complex 3-dimensional interrelationships of structural components. Initial implementation has focused on the modeling of the components and assemblies for a lowrise steel frame structure. Current implementation efforts are focusing on the capability to view connections in various ways including the ability to "explode" a connection to better understand the sequence of construction and load paths. Appropriate codes, limit states of failure and specific data will be linked to each specific component in an expert system shell so that the system can offer feedback about a student generated connection and perhaps offer other possible connections a library of standard connections. Future expansion of the system will include adding other "systems" of a building, such as mechanical, electrical, plumbing, enclosure etc., to help students visualize the integration of the various parts.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	2bcc
authors	Mark, Earl
year	1989
title	A Contrast in Pedagogy: The M.l.T. Versus Harvard Approach to Computer Aided Design
doi	https://doi.org/10.52842/conf.ecaade.1989.x.d8b
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.1.1-5.1.9
summary	This is a period of relative detente among academics in the field of computers and architecture, advocating the use of computers in a design studio is today received more politely than, as in the past, when it was received like a declaration of war. Among some research groups at M.I.T. and Harvard to first engage In this field, the approaches were so dissimilar to one another that they could be considered as constituting separate schools of thought. Over time, however, a number of paths have led to a similar direction, if not agreement among principal investigators. The lack of sharply competing ideologies today may be a little less exciting: however, the enormous growth of the academic discipline seems now to allow for a fruitful exchange of ideas between positions that no longer seem mutually exclusive. Two views are important, among others, at M.I.T. and Harvard. The classic M.I.T. view looks upon the AI Lab as a microcosm for examining how architects think. Underlying this view is the position of 'lets examine the way architects think about design and build tools which can reflect that process'. Another point of view, as expressed at Harvard, is speculative on what architects seem to do in design practice and education, rather than speculative on the nature of thinking per se. Both views seem ultimately to be concerned with representing architectural design knowledge within computers. And in the rob of computers as a design medium. This paper examines how the M.I.T. view and the Harvard view have superficially been associated with separate research directions. As these contrasting points of view incorporate many common themes. The author finds that it may be possible to take an eclectic position in teaching computer aided design.
keywords	Constraints, Shape Grammars, Representational World, Emergent Form. Design Thinking, Design Habit
series	eCAADe
email
more	http://palladio.arch.Virginia.EDU/~arch-con/exhibit/
last changed	2022/06/07 07:50

_id	086b
authors	Maver, Thomas W.
year	1989
title	Computer Graphics in Architectural Education - The Strathclyde Experience
doi	https://doi.org/10.52842/conf.ecaade.1989.x.l8r
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.4.1-5.4.14
summary	The following paper describes the teaching and research activities of the Department of Architecture and Building Science at the University of Strathclyde and highlights the role of CAAD and, more specifically, of Computer Graphics in the curriculum. The presentation during the Conference will deal in greater depth with how students use increasingly sophisticated hardware and software in their investigation of the formal qualities of buildings and of how best they can be visualised on site.
keywords	Computer Graphics, Photomontage, Animation, Video Mixing
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8bf3
authors	McCullough, M., Mitchell, W.J. and Purcell, P. (Eds.)
year	1990
title	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [Conference Proceedings]
source	International Conference on Computer-Aided Architectural Design 1989/ ISBN 0-262-13254-0] (Massachusetts / USA), 1989, 505 p.
summary	Design is the computation of shape information that is needed to guide fabrication or construction of artifacts. But it is not so straightforward as, say, the computation of numerical information required to balance a checkbook. This is partly because algebras of shapes are not as well understood and precisely formalized as algebras of numbers, partly because the rules for carrying out shape computations tend to be fluid and ill defined and partly because the predicates that must be satisfied to achieve successful termination are often complex and difficult to specify. For centuries architects have carried out shape computations by hand, using informal procedures and the simplest of tools. Over the last two decades though, they have made increasing use of more formal procedures executed by computers. It is still too early to be sure of the gains and losses that follow from this development, but there is no doubt that it raises some challenging questions of architectural theory and some perplexing issues for those concerned with the future of architectural education. This book frames those issues and provides a diversity of perspectives on them. Its contents were initially presented at the CAAD Futures 89 Conference-an international gathering of researchers and teachers in the field of computer-aided architectural design which was jointly sponsored by the Harvard Graduate School of Design and the MIT Department of Architecture and held in Cambridge, Massachusetts, in July 1989. There are four major sections: Theoretical Foundations, Knowledge-Based Design Tools, Information Delivery Systems, and Case Studies: Electronic Media in the Design Studio. In a representative collection of current views, over thirty extensively illustrated papers discuss the experiences of universities in the USA, Europe, Japan, Israel, Canada, and Australia, articulate present theoretical and practical concerns, provide criticism of media and methods, and suggest directions for the future. Architectural educators and architects concerned with the effect of computer technology on the design process will find here an indispensable reference and a rich source of ideas. This book was itself prepared in an electronic design studio. Composition and typography, most image collection and placement, and such editing as was practical within this publishing format, were all performed digitally using Macintosh computers at the Harvard Graduate School of Design during a period of a few weeks in 1989.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ac36
authors	McCullough, Malcolm
year	1990
title	Low-Threshold Modeling
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 413-426
summary	This is a case study of teaching at the University of Texas at Austin. It is about using an electronic design studio to provide architecture students with their first exposure to computing. It suggests that, despite the limitations of present technology, there is reason to lower the thresholds to computer-aided design. The study presents a studio which attempted such by allowing students to find their own level of commitment to use of electronic media for geometric modeling. More generally, the paper aims to document issues presently facing the many professional schools not having substantial traditions in computer-aided design education.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	0ecb
authors	Waerum, Jens and Rüdiger Kristiansen, Bjarne
year	1989
title	CAAD Education at the School of Architecture Copenhagen
doi	https://doi.org/10.52842/conf.ecaade.1989.x.q8k
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.5.1-4.5.9
summary	The establishment of Datacentret (the Data Centre) in summer 1985 was preceded by 15 years slow- moving, arduous work from the early experiments in what was then the computing laboratory under the supervision of architect Per Jacobi, author of the Danish 3D drawing system MONSTER, until 1984, when a special committee was commissioned to draw up proposals for the introduction of teaching in computing at the Architects School. In spring 1985 the school administrators decided that a central computer workshop should be set up and in cooperation with the school's institutes placed jointly in charge of instructing teachers and students, carrying out research and development within the field of architecture and taking steps to work out a curriculum of supplementary training for practising architects. With the aid of a special grant, 12 PC's were successfully acquired in the 2 years that followed, as well as a screen projector and other peripherals.
series	eCAADe
last changed	2022/06/07 07:50

_id	a8b7
authors	De Grassi, Mario and Di Manzo, Mauro
year	1989
title	The Design of Buildings as Changes of Known Solutions: A Model for “Reasoner B” ; Reasoner B" in the Castorp System
doi	https://doi.org/10.52842/conf.ecaade.1989.x.u3h
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.3.1-7.3.9
summary	The paper presents a study aimed at the modelization of a design operation of perturbation of an architectural framework in order to comply with a series of given design specifications. A formalized representation of the building object is assumed, Artificial Intelligence techniques are adopted to work on it. It is assumed that the computer carries out deformations starting from one of these structures in order to attain to a solution consistent with project specifications. A description of the structures employed for the representation of the building body (matroids) is firstly proposed. A planning theme is then assumed, as an example, whose main feature is to maintain the outer perimeter of a dwelling, to change its internal distribution in such a way as to resemble as closely as possible to the original and yet meaningfully alter its typology.
series	eCAADe
type	normal paper
last changed	2022/06/07 07:50

_id	778e
authors	Gann, D.
year	1994
title	Archaeological Site Reconstruction With AutoDesk's 3D Studio
source	CSA Newsletter Vol 7:3 Nov 1994
summary	3D Studio is an IBM-compatible computer modeling program that enables users to create three-dimensional renderings of a variety of objects. In its ability to import a wide variety of maps and other images, 3D Studio allows for the realistic rendering of models created within AutoCAD or other 3D CAD packages. Over the past year, the Homol'ovi research program has been utilizing this software to create near photo-realistic renderings of conjectural site models. My own interests in three-dimensional computer modeling developed out of work at the site of Homol'ovi IV, a 150-room pueblo site located near Winslow, Arizona. The site was situated upon a steep 30-meter bluff with a bedrock cap. Approximately 24 rooms were located on top of the bedrock cap, with another 125 rooms situated on the slope of the butte. During the 1989 field season five structures were excavated, while a separate crew worked clearing and mapping the tops of walls. Mapping was accomplished with a Topcon EDM/theodolite station, and a standard map was created from this process. (See Fig. 3.) While the map was sufficient to show the general layout of the site, I remained unsatisfied; a 2D plan view simply did not convey the vertical dimension of the pueblo. At this point the Homol'ovi Research Program purchased a copy of AutoCAD in order to begin exploring three-dimensional mapping and modeling.
series	other
last changed	2003/04/23 15:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	4cf3
authors	Kalay, Yehuda E.
year	1989
title	Modeling Objects and Environments
source	xix, 402 p. : ill. New York: Wiley, 1989. includes a short bibliography and index. Part of the Principles of Computer Aided Design series. --- See also review by Patricia G
summary	McIntosh, in ACADIA Newsletter Vol. 9 No. 3 pp 20-23, June 1990. This book introduces the concept of modeling objects in the computer's memory so it can be used to aide the process of their design. Modeling is defined as an hierarchical abstraction of data and operators to manipulate it, subject to semantic integrity constraints that guarantee the realizability of the designed artifact in the real world. Starting with general concepts of modeling, the book moves on to discuss the modeling of shapes (form) in two and in three dimensions. The discussion covers both topology and geometry. Next the book introduces the concept of shape transformations (translation, scaling, rotation, etc.), both in absolute and in relative terms. The book then introduces the concept of assembly modeling, and adds non-graphical attributes to the representation. It concludes with a discussion on user interface and parametrization. The book includes many examples written in Pascal that complement the theory, and can be used as a basis for building a geometric modeling engine. It also includes exercises, so it can be used as a text book for a two-semester advance course in geometric modeling
keywords	CAD, data structures, solid modeling, abstraction, polygons, solids, boolean operations, transforms, computer graphics, user interface, parametrization, B-rep, polyhedra, objects, PASCAL
series	CADline
email
last changed	2003/06/02 13:58

_id	8a0c
authors	Tan, Milton
year	1990
title	Saying What It Is by What It Is Like - Describing Shapes Using Line Relationships
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 201-213
summary	Shapes - taken as well-defined collections of lines - are fundamental building blocks in architectural drawings. From doodles to shop drawings, shapes are used to denote ideas and represent elements of design, many of which ultimately translate into actual objects. But because designs evolve, the shapes representing a design are seldom static - instead, they are perpetually open to transformations. And since transformations involve relationships, conventional methods of describing shapes as sets of discrete endpoints may not provide an appropriate foundation for schematic design. This paper begins with a review of the perception of shapes and its significance in design. In particular, it argues that juxtapositions and inter-relationships of shapes are important seedbeds for creative development of designs. It is clear that conventional representation of shapes as sets of discrete lines does not cope with these -emergent" subshapes; the most basic of which arise out of intersecting and colinear lines. Attempts to redress this by using ‘reduction rules’ based on traditional point-and-line data structures are encumbered by computational problems of precision and shape specification. Basically, this means that some ‘close’ cases of sub-shapes may escape detection and their specifications are difficult to use in substitution operations. The paper presents the findings of a computer project - Emergence II - which explored a 'relational' description of shapes based on the concept of construction lines. It builds on the notion that architectural shapes are constructed in a graphic context and that, at a basic compositional level, the context can be set by construction lines. Accordingly, the interface enables the delineation of line segments with reference to pre-established construction lines. This results in a simple data structure where the knowledge of shapes is centralized in a lookup table of all its construction lines rather than dispersed in the specifications of line segments. Taking this approach, the prototype software shows the ease and efficiency of applying ‘reduction rules’ for intersection and colinear conditions, and for finding emergent sub-shapes by simply tracking the construction lines delimiting the ends of line segments.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

For more results click below: