Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 203

Reformat results as: short short into frame detailed detailed into frame

_id	417a
authors	Cipriani, R., Lagomarsino, A.D., Stagnaro, A., Valenti, E. and Sambolino, T.
year	1990
title	Some Years' Experience Teaching CAAD
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 347-361
summary	In the conventional way of teaching architecture, it is common to think of design as the final synthesis of an intellectual process (composizione in Italian) integrating different elements from different curriculum subjects: history, structural analysis., technology, regional and urban planning, and so on. These elements, being comprehensive of their specific domains, together build the project. This process is supported by a long traditional that cannot easily be modified; however, we must not consider it to be the only one. Architectural practice should be much more. The Scuole di Architettura has walked a long and difficult road in the last thirty years., with a significant widening of interest in social, political, and economic issues. There have been recurring attempts at epistemological reformulation in some areas. There has been an acknowledgment of a crisis in contemporary town planning and a dimming of several certitudes that had developed with the birth and growth of the modernist school. And there has been a weakening of the promises that had given life to the vigorous discussion about town and regional planning. All of this leads to a reconsideration of the meaning and the deeper assumptions that the project implies, a question mark at the center of the human sciences that architectural practice involves. The old tradition., which assigned composition a central role in the project, is no longer sufficient because it is related to a reductive reading of epistemology that views human sciences as defining segments of physical knowledge of the actual world. Contemporary reflection on the difference between understanding and unfolding, together with the attention given to interpreting a moment as compared to purely describing one, gives to the project the task of inquiry instead of solution.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	2e50
authors	Ozersay, Fevzi and Szalapaj, Peter
year	1999
title	Theorising a Sustainable Computer Aided Architectural Education Model
doi	https://doi.org/10.52842/conf.ecaade.1999.186
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 186-195
summary	The dogmatic structure of architectural education has meant that the production and application of new educational theories, leading to educational models that use computer technology as their central medium of education, is still a relatively under-explored area. Partial models cannot deliver the expected bigger steps, but only bits and pieces. Curricula developments, at many schools of architecture, have been carried out within the closed circuit manner of architectural education, through expanding the traditional curricula and integrating computers into them. There is still no agreed curriculum in schools of architecture, which defines, at least conceptually, the use of computers within it. Do we really know what we are doing? In the words of Aart Bijl; 'If I want to know what I am doing, I need a separate description of my doing it, a theory' [Bijl, 1989]. The word 'sustainability' is defined as understanding the past and responding to the present with concern for the future. Applying this definition to architectural education, this paper aims to outline the necessity and the principles for the construction of a theory of a sustainable computer aided architectural education model, which could lead to an architectural education that is lasting.
keywords	Architectural Education, Educational Theories, Computers, Sustainable Models
series	eCAADe
email
last changed	2022/06/07 08:00

_id	45e6
authors	Agger, Kristian and Lentz, Uffe (Eds.)
year	1989
title	CAAD: Education - Research and Practice [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1989
source	eCAADe Conference Proceedings / ISBN 87-982875-2-4 / Aarhus (Denmark) 21-23 September 1989
summary	In the announcement of the sixth eCAADe Conference we stated that It is held at a time where CAAD is moving into practice very fast, with heavy influence on research and education. We stated that research is directed towards the early design phases, and that education is facing the problem of mass education. In that situation much benefit can be obtained from collaboration with practice. We decided to give the conference the title “CAAD: Education - Research and Practice” to state the importance of practice as a test bench. The conference papers cover education and research in depth in many important areas and give a good overview, whereas the practical theme is more or less missing, indicating, that experience here is still modest. At the lecture material market and the exhibition the situation is opposite and shows state of art in practical use.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8775
authors	Cigolle, Mark and Coleman, Kim
year	1990
title	Computer Integrated Design: Transformation as Process
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary	To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e365
authors	Danahy, John
year	1989
title	Intuition & Computer Visualization in an Urban Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1989.x.i5v
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.2.1-4.2.6
summary	This paper will present prototypical software being used in the teaching of urban design to students and for use by professionals in the early stages of a project. The system is intended to support a heuristic approach to design. That is, it supports a process of refining ideas and understandings through a process of trial and error. The support or aid to design comes in the form of a didactic real-time programme. Its power lies in its ability to provide instantaneous response to operations on the data that can allow one to develop three-dimensional spatial ideas in an intuitively driven manner. This condition appears to occur for both novice and expert computer operators. The presentation will present our experience to-date in using conventional computer graphic tools to represent design ideas and contrast it with a video demonstration of ow prototypical dynamic urban design modelling software for the Silicon Graphics IRIS computers.
keywords	Intuition, Visualization, Urban Design, Modelling, Real-Time
series	eCAADe
email
last changed	2022/06/07 07:50

_id	e33a
authors	De Cola, S., De Cola, B. and Pentasuglia, Francesco
year	1990
title	Messina 1908: The Invisible City
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 239-246
summary	The initial purposes of this work were to build a 3D model of the old city of Messina and to reconstruct a walk through it; to understand the "Ghost city," the parts that form it, and the rules of its plan, which are explicit in some cases but hidden most of the time; to measure its space, appreciate the similarities to and differences from modern city plans, and use the information to improve the plans of tomorrow. It might seem a useless study of a nonexistent city, and yet during the months of detailed work, of patient reconstruction from the surveys and photographs of the city destroyed in 1908, we began to consider how it was still possible to obtain spatial values of and to project behaviors in the lost city, in other words, to practice tests on memory that are very interesting for people working in a context in which memory no longer exists. The work presented here is the first stage of a more complex research project still to be carried out on Messina as it was at the end of the nineteenth century. Here we constructed a 3D model of some parts of the city prior to the earthquake of 1908 and made a five-minute video, using cartoon techniques, of an "impossible" walk through the city. The fragments of the city were reconstructed from available documentary sources, primarily photographic images, which tended to be of the most important places in the city.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	10a5
authors	Edwards, D.M. and Hardman, L.
year	1989
title	Lost In Hyperspace: Cognitive Mapping and Navigation in a Hypertext Environment, Chapter 7
source	Hypertext: Theory Into Practice, Edited by McAleese, Ray., Ablex Publishing Corporation, New Jersey
summary	This paper describes an experiment which looks at how the users of a hypertext document cognitively represent its layout. A document was formed into three different hypertext styles and was presented to the readers, they were then asked a series of questions about information contained in the hypertexts. The way the users found the answers and the time taken was recorded, they were also ask to lay out cards, with reduced versions of the screen on them, on a board and as they thought them to be arranged in the document and also to draw any connecting hypertext links they thought existed between these screens. The users selected for this experiment consisted of 27 university undergraduates 15 male and 12 female with a mean age of 20.5 years with little or no computing experience. They were each assigned one of the three hypertext methods and their performance was recorded. The three methods consisted of a hierarchical, a mixed and an index based method.
series	other
last changed	2003/04/23 15:14

_id	4104
authors	Ervin, Stephen McTee
year	1989
title	The structure and function of diagrams in environmental design :a computational inquiry
source	Massachusetts Institute of Technology
summary	The design process often begins with a graphical description of the proposed device or system and sketching is the physical expression of the design engineer's thinking process. Computer Aided Design is a technique in which man and machine are blended into a problem solving team, intimately coupling the best characteristics of each. Solid modelling is developed to act as the common medium between man and the computer. At present it is achieved mainly by designing with volumes and hence does not leave much room for sketching input, the traditional physical expression of the thinking process of the design engineer. This thesis describes a method of accepting isometric free hand sketching as the input to a solid model. The design engineer is allowed to make a sketch on top of a digitizer indicating (i) visible lines; (ii) hidden lines; (iii) construction lines; (iv) centre lines; (v) erased lines; and (vi) redundant lines as the input. The computer then processes this sketch by identifying the line segments, fitting the best possible lines, removing the erased lines, ignoring the redundant lines and finally merging the hidden lines and visible lines to form the lines in the solid in an interactive manner. The program then uses these lines and the information about the three dimensional origin of the object and produces three dimensional information such as the faces, loops, holes, rings, edges and vertices which are sufficient to build a solid model. This is achieved in the following manner. The points in the sketch are first written into a file. The computer than reads this file, breaks the group of points into sub-groups belonging to individual line segments, fits the best lines and identify the vertices in two dimensions. These improved lines in two dimensions are then merged to form the lines and vertices in the solid. These lines are then used together with the three dimensional origin (or any other point) to produce the wireframe model in three dimensions. The loops in the wireframe models are then identified and surface equations are fitted to these loops. Finally all the necessary inputs to build a B-rep solid model are produced.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	778e
authors	Gann, D.
year	1994
title	Archaeological Site Reconstruction With AutoDesk's 3D Studio
source	CSA Newsletter Vol 7:3 Nov 1994
summary	3D Studio is an IBM-compatible computer modeling program that enables users to create three-dimensional renderings of a variety of objects. In its ability to import a wide variety of maps and other images, 3D Studio allows for the realistic rendering of models created within AutoCAD or other 3D CAD packages. Over the past year, the Homol'ovi research program has been utilizing this software to create near photo-realistic renderings of conjectural site models. My own interests in three-dimensional computer modeling developed out of work at the site of Homol'ovi IV, a 150-room pueblo site located near Winslow, Arizona. The site was situated upon a steep 30-meter bluff with a bedrock cap. Approximately 24 rooms were located on top of the bedrock cap, with another 125 rooms situated on the slope of the butte. During the 1989 field season five structures were excavated, while a separate crew worked clearing and mapping the tops of walls. Mapping was accomplished with a Topcon EDM/theodolite station, and a standard map was created from this process. (See Fig. 3.) While the map was sufficient to show the general layout of the site, I remained unsatisfied; a 2D plan view simply did not convey the vertical dimension of the pueblo. At this point the Homol'ovi Research Program purchased a copy of AutoCAD in order to begin exploring three-dimensional mapping and modeling.
series	other
last changed	2003/04/23 15:50

_id	eee2
authors	Gero, John S. and Rosenman, Michael A.
year	1989
title	A Conceptual Framework for Knowledge-Based Design Research at Sydney University's Design Computing Unit
source	Southampton/Berlin: CMP/Springer- verlag, 1989. pp. 363-382. Published also in Artificial Intelligence in Engineering 5(2):363-383, 1990
summary	This paper presents the conceptual framework behind the Design Computing Unit's knowledge-based design research. It commences with a brief overview before introducing the role of experience in design. The conceptual schema 'prototypes' is introduced and described within a framework of design as transforming required or expected functions to structure descriptions. Current projects related to this conceptual framework are briefly described
keywords	CAD, knowledge base, design, prototypes, representation
series	CADline
email
last changed	2003/06/02 13:58

_id	22bd
authors	Hoffmann, C.M., Hopcroft, J.E. and Karasick, M.S.
year	1989
title	Robust Set Operations on Polyhedral Solids
source	IEEE Computer Graphics and Applications. November, 1989. vol. 9: pp. 50-59 : ill. includes bibliography
summary	The paper describes an algorithm for performing regularized Boolean operations on polyhedral solids. Robustness is achieved by adding symbolic reasoning as a supplemental step to resolve possible numerical uncertainty. Additionally, numerical redundancy and numerical computation based on derived quantities are reduced as much as possible. It also discusses the authors' experience with the implementation of the algorithm
keywords	algorithms, polyhedra, solids, representation, computational geometry, geometric modeling, boolean operations
series	CADline
last changed	2003/06/02 14:41

_id	a87a
authors	Kroszynski, U.I., Palstorem, Bj. and Trostmann, E. (et al)
year	1989
title	Geometric Data Transfer Between CAD Systems : Solid Models
source	IEEE Computer Graphics and Applications September, 1989. vol. 9: pp. 57-71 : ill. includes bibliography.
summary	The CAD/CAM community is showing great interest in the development of data exchange standards. This article highlights some aspects of the work accomplished during the first phase of the ESPRIT project CAD1. Part of this work has resulted in a specification for the exchange of solid models, as well as in some pilot implementations of processors based on this specification. This work also contributes to the efforts of the International Standards Organization (ISO) in developing the Standard for the Exchange of Product Model Data (STEP). The authors present a summary of the CAD1 approach, addressing the structure of neutral files for solids, entities, and attributes supporting three kinds of representations; facilities for the transfer of parametric designs; referencing library components; and other general mechanisms. Also is described the current state of the specification and processor implementations. An example of a CAD1 neutral file is included. Results from cycle and intersystem solid model transfer tests are presented, showing the practicality of the CAD1 proposal. B-rep model transfer results are discussed in some detail. Finally, the authors outline the relationship of this work with standardization
keywords	communication, solid modeling, standards, STEP, B-rep
series	CADline
last changed	2003/06/02 14:42

_id	0711
authors	Kunnath, S.K., Reinhorn, A.M. and Abel, J.F.
year	1990
title	A Computational Tool for Evaluation of Seismic Performance of RC Buildings
source	February, 1990. [1] 15 p. : ill. graphs, tables. includes bibliography: p. 10-11
summary	Recent events have demonstrated the damaging power of earthquakes on structural assemblages resulting in immense loss of life and property (Mexico City, 1985; Armenia, 1988; San Francisco, 1989). While the present state-of-the-art in inelastic seismic response analysis of structures is capable of estimating response quantities in terms of deformations, stresses, etc., it has not established a physical qualification of these end-results into measures of damage sustained by the structure wherein system vulnerability is ascertained in terms of serviceability, repairability, and/or collapse. An enhanced computational tool is presented in this paper for evaluation of reinforced concrete structures (such as buildings and bridges) subjected to seismic loading. The program performs a series of tasks to enable a complete evaluation of the structural system: (a) elastic collapse- mode analysis to determine the base shear capacity of the system; (b) step-by-step time history analysis using a macromodel approach in which the inelastic behavior of RC structural components is incorporated; (c) reduction of the response quantities to damage indices so that a physical interpretation of the response is possible. The program is built around two graphical interfaces: one for preprocessing of structural and loading data; and the other for visualization of structural damage following the seismic analysis. This program can serve as an invaluable tool in estimating the seismic performance of existing RC buildings and for designing new structures within acceptable levels of damage
keywords	seismic, structures, applications, evaluation, civil engineering, CAD
series	CADline
last changed	2003/06/02 14:41

_id	c903
authors	Mark, Earl
year	1990
title	Case Studies in Moviemaking and Computer-Aided Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 393-412
summary	A movie which is developed from site location video, sync sound, and computer graphics animation can provide a highly convincing simulation of reality. A movie that conveys a sense of the space, materials and juxtaposition of objects of a proposed architectural design provides a special kind of realism, where the representation may be of a proposed building that exists only within the mind of an architect. For an experienced architect, however, the movie may not provide a good surrogate experience for what it feels like to actually be within the architectural space. In these case studies, a few projects that combine moviemaking and computer-aided design technologies are examined. These projects were completed using a combination of resources at the MIT School of Architecture and Planning and the Harvard Graduate School of Design. The integrated use of these media is presented as conceptualized with the Electronic Design Studio, a research project that has been supported over the past five years by Project Athena at MIT. The impact of movies and computer-aided design on the perception of architectural space is also reported- based on a pilot study of twenty architectural students.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	086b
authors	Maver, Thomas W.
year	1989
title	Computer Graphics in Architectural Education - The Strathclyde Experience
doi	https://doi.org/10.52842/conf.ecaade.1989.x.l8r
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.4.1-5.4.14
summary	The following paper describes the teaching and research activities of the Department of Architecture and Building Science at the University of Strathclyde and highlights the role of CAAD and, more specifically, of Computer Graphics in the curriculum. The presentation during the Conference will deal in greater depth with how students use increasingly sophisticated hardware and software in their investigation of the formal qualities of buildings and of how best they can be visualised on site.
keywords	Computer Graphics, Photomontage, Animation, Video Mixing
series	eCAADe
email
last changed	2022/06/07 07:50

_id	49a8
authors	McCall, R., Fischer, G. and Morch, A.
year	1990
title	Supporting Reflection-in-Action in the Janus Design Environment
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 247-259
summary	We have developed a computer-based design aid called Janus, which is based on a model of computer-supported design that we think has significance for the future of architectural education. Janus utilizes a knowledge-based approach to link a graphic construction system to hypertext. This allows the computer to make useful comments on the solutions that students construct in a CAD-like environment. These comments contain information intended to make students think more carefully about what they are doing while they are doing it. In other words, Janus promotes what Donald Schon has called "reflection-inaction" (Schon, 1983). The Janus design environment is named for the Roman god with a pair of faces looking in opposite directions. In our case the faces correspond to complementary design activities we call construction and argumentation. Construction is the activity of graphically creating the form of the solution e.g., a building. Traditionally this has been done with tracing paper, pencils, and pens. Argumentation is the activity of reasoning about the problem and its solution. This includes such things as considering what to do next, what alternative courses of action are available, and which course of action to choose. Argumentation is mostly verbal but partly graphical.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	a6a5
authors	Mortola, Elena
year	1989
title	The Interface for Designing
doi	https://doi.org/10.52842/conf.ecaade.1989.x.a2q
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 8.5.1-8.5.15
summary	A case which supports the use of computer graphics in design process is presented in this paper. The case is put forward in three stages: the first stage analyzes the relationship between drawing and design (design-by-drawing) and explores the transformations generated by the computer graphics. The second stage describes a didactic experience in the Faculty of Architecture of Rome. The third stage describes a project related to design interface.
keywords	Design, Computer, Drawing, Methods
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: