Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 206

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ee16
authors	Coyne, R.D., Newton, S. and Sudweeks, F.
year	1989
title	Modeling the Emergence of Schemas in Design Reasoning
source	Design Computing Unit, Department of Architectural and Design Science, University of Sydney, 1989. pp. 173-205. CADLINE has abstract only
summary	The authors explore how neural networks can be used to model important aspects of design reasoning: the way design involves memory; and a 'holistic' kind of reasoning by which designs appear to emerge from that memory. A simple neural network is constructed to demonstrate how information about schemas (in this case, room types) is stored implicitly after exposure to a number of examples of specific rooms. We then demonstrate how new room types emerge from this information. The paper includes a discussion of design, a discussion of schemas from a psycholinguistic perspective, a technical explanation of neural networks and the demonstration of an implemented examples
keywords	neural networks, modeling, design, reasoning, learning, knowledge acquisition, experimentation
series	CADline
email
last changed	2003/05/17 10:13

_id	6152
authors	Longhi, Domenico
year	1989
title	A System for Building Design Information Management
doi	https://doi.org/10.52842/conf.ecaade.1989.x.b7n
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.11.1-9.11.8
summary	Computer assistants to building process management are not able nowadays to efficiently work out the problems generated by the increased complexity of designing. Actual difficulties depend, on one hand, on the fact D.B.M.S. that have been developed on other environments than CAAD, and on the other hand, on the fact that architectural design process is scarcely formalized. At the Department of T.E.C.A., at the University of Rome, a PhD research program is aimed to overcome difficulties, working out techniques of information management based on Knowledge Engineering and particularly on Knowledge Base Management Systems and Expert Database Systems. At present a prototype system is being developed, that can manage existing technical information, connected with buiIding process.
keywords	Information Management, Data Base, Computer Assistants, BuiIding Process
series	eCAADe
last changed	2022/06/07 07:50

_id	5bec
authors	Penrose, R.
year	1989
title	The Emperor's New Mind. Concerning Computers Minds, and the Laws of Physics.
source	Oxford University Press
summary	The Emperor's New Mind, physicist Roger Penrose's 1989 treatise attacking the foundations of strong artificial intelligence, is crucial for anyone interested in the history of thinking about AI and consciousness. Part survey of modern physics, part exploration of the philosophy of mind, the book is not for casual readers--though it's not overly technical, it rarely pauses to let the reader catch a breath. The overview of relativity and quantum theory, written by a master, is priceless and uncontroversial. The exploration of consciousness and AI, though, is generally considered as resting on shakier ground. Penrose claims that there is an intimate, perhaps unknowable relation between quantum effects and our thinking, and ultimately derives his anti-AI stance from his proposition that some, if not all, of our thinking is non-algorithmic. Of course, these days we believe that there are other avenues to AI than traditional algorithmic programming; while he has been accused of setting up straw robots to knock down, this accusation is unfair. Little was then known about the power of neural networks and behavior-based robotics to simulate (and, some would say, produce) intelligent problem-solving behavior. Whether these tools will lead to strong AI is ultimately a question of belief, not proof, and The Emperor's New Mind offers powerful arguments useful to believer and nonbeliever alike
series	other
last changed	2003/04/23 15:14

_id	b565
authors	Yessios, Chris I. (Ed.)
year	1989
title	New Ideas and Directions for the 1990’s [Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.1989
source	ACADIA Conference Proceedings / Gainsville (Florida - USA) 27-29 October 1989, 262 p.
summary	About a year ago, a comment of mine to Bob Johnson that recent Acadia Conferences appeared to be bypassing some of the real issues of CAAD and that the attendants seemed to be missing the opportunity to debate and to argue, landed me a request to be the Technical Chair for this Acadia 89. In spite of an expected heavy load this past year, I could not refuse. I certainly did not realize at the time what it would take to put the technical program of this Conference together: two "calls" for papers, many- many phone calls and the gracious acceptance of three invited speakers and twelve panelists. In response to a recommendation by Pamela Bancroft, last year's Technical Chair, the first call for papers had a deadline which was by about a month earlier than it has been in recent years. This must have found our membership unprepared and generated only thirteen submissions. A second call was issued with the end of July as a deadline. It generated another eleven submissions. Out of that total of twenty-four papers, ten were selected and are presented in this Conference. The selection process was based strictly on averaging the grades given by each of the three referees who blindly reviewed each paper. The names of the reviewers have been listed earlier in this volume and I wish to take this opportunity to wholeheartedly thank them. In most cases the reviewers offered extensive comments which were returned to the authors and helped them improve their papers. Many of the papers have actually been rewritten in response to the reviewers' comments and what are included in these Proceedings are substantially improved versions of the papers originally submitted. This is the way it is supposed to be, but could not be done without the excellent response by the authors. I"hey deserve our sincere thanks. It must be noted that the reviewers were not always in agreement, which should tell us something about the diverse orientations of our members. In the case of at least three papers, one reviewer gave a 0 or 1 (very low) when another gave a 9 or 10 (very high). In these cases the third reviewer gave the deciding grade. In no case was there a need for me to break a tie. Under normal circumstances, these "controversial" papers should have gone out for another cycle of reviews. Time did not permit to do so. However, I feel confident that the papers which have been selected deserve to be heard. It may be worth speculating why it took two calls to generate only 24 submissions when last year we had 42. There are a number of factors which must have had an effect. First of all, the early deadline. Secondly, the theme of this year's Conference was more focussed than it has been in the recent past. In addition, it was quite challenging. Even though the calls also encouraged submissions in areas other than the central theme, they discouraged contributions which might be redundant with past presentations. This must have filtered out presentations about "CAD in the studio" which did not have an orientation distinctively different from what everybody else is doing. Last, but possibly the most decisive factor must have been that, this year, Acadia was in competition with the Futures Conference. It does not take much to observe that more than half of the presentations at the CAAD Futures Conference were given by active Acadia members. Acadia should by all means be delighted that the bi-annual Futures took place in the States this year, but it certainly made our organizational task harder. As a matter of fact, as a record of CAAD happenings in 1989, 1 believe the Proceedings of the two Conferences complement each other and should be read as a pair.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	1e3d
authors	Bernard, Rusty
year	1989
title	USL/State Facility Planning and Control Automation Pilot Project
doi	https://doi.org/10.52842/conf.acadia.1989.179
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 179-192
summary	State supported Universities often lend a helping hand to their state by providing services which may be difficult or impossible to acquire otherwise. This presentation reviews the process of computer aided facility management with special reference to a recently completed joint venture project to fully automate Louisiana's Facility Planning and Control services.
series	ACADIA
last changed	2022/06/07 07:52

_id	82b9
authors	Beyers, Robert and Desa, Subhas
year	1989
title	Design of Control Systems for Performance : A Constraint Mapping Approach
source	17 p. : ill Engineering Design Research Center, CMU, October, 1989. EDRC 24-10-89. includes bibliography.
summary	Simple s-plane maps are used to graphically reveal interactions of performance requirements and constraints thus providing a control system designer insight into performance trade-offs. Two well-known but powerful ideas underlie this approach: (a) the characteristic equation of an nth-order system can be fully described by the specification of n variables and (b) any dynamic performance requirement or constraint can be expressed in terms of 2n variables of which n describe the open-loop and n describe the closed-loop characteristic equations. An example illustrates the application of the approach to controller design
keywords	constraints, engineering, control, systems, design, performance
series	CADline
last changed	2003/06/02 13:58

_id	e19d
authors	Birmingham, William P. and Siewiorek, Daniel P.
year	1989
title	Capturing Designer Expertise : The CGEN System
source	18 p. : ill Pittsburgh, PA: Engineering Design Research Center, CMU, August, 1989. EDRC 18-08-89. includes bibliography.
summary	Knowledge-based systems are becoming pervasive in the computer-aided design area. For these systems to achieve satisfactory levels of performance large amounts of knowledge are necessary. However, the acquisition of knowledge is a difficult and tedious task. Automated knowledge-acquisition tools (AKAT) provide capabilities for quickly building and maintaining knowledge-bases. This paper describes the CGEN AKAT, which allows hardware designers, unfamiliar with artificial intelligence programming techniques, to deposit their expertise into a synthesis tool's knowledge-base. A set of experiments which tested CGEN's capabilities are presented. The experiments show that with CGEN hardware designers can produce high quality knowledge-bases
keywords	CAD, automation, knowledge acquisition, tools, AI, programming, knowledge base, systems, integrated circuits, hardware
series	CADline
last changed	2003/06/02 10:24

_id	6a30
authors	Bonn, Markus
year	1989
title	Modeling Architectural Forms through Replacement Operations
doi	https://doi.org/10.52842/conf.acadia.1989.103
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 103-130
summary	Replacement operations, where an element at any topological level may be replaced by another element at the same or different topological level, are defined. Their potential as design tools which may be incorporated in a CAD system is investigated and demonstrated through the experimental implementation of two such operations in MARCOS, a Modeling Architectural Compositions System. MARCOS has been written in C. It is highly interactive and runs on an Apple Macintosh IIx. The two operations which have been implemented are the face -> volume and volume -> volume replacements. They were chosen for their potential as generators of architectural forms. Examples of architectural compositions produced through the use of replacement operations are also illustrated.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8775
authors	Cigolle, Mark and Coleman, Kim
year	1990
title	Computer Integrated Design: Transformation as Process
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary	To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	801b
authors	Cocchioni, Cristina and Mecca, Saverio
year	1989
title	Utilization of Rules for Modular Coordination in Relational Models to Be Employed In CAAD
doi	https://doi.org/10.52842/conf.ecaade.1989.x.p3f
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.5.1-7.5.11
summary	The paper deals with the structure of experimental software to be used for the interactive relational database and a graphic package. Proposed is the development that considers the main implications of a modular space grid for the project´s development already from the stage of preliminary wire-frame design.
series	eCAADe
last changed	2022/06/07 07:50

_id	e303
authors	Coyne, Richard D. and Newton, S.
year	1989
title	A Tutorial on Neural Networks and Expert Systems for Design
source	University of Sydney, 1989. pp. 321-337. CADLINE has abstract only
summary	This paper presents an overview of neural network (connectionist) systems and their potential contribution to computer-aided design. The authors discuss the appeal of neural networks and some of the problems. The major contribution to design is in the representation and manipulation of schemas. A neural network system can be 'taught' various examples (such as room descriptions). The system then apparently recognizes schemas (room types) and can produce novel but sensible combinations of descriptions constituting new types. A simple handworked example is presented, and the learning and reasoning mechanism is explained
keywords	representation, CAD, expert systems, design, neural networks
series	CADline
email
last changed	2003/05/17 10:13

_id	e1c9
authors	Danahy, John and Wright, Robert
year	1989
title	Computing and Design in the Canadian Schools of Architecture and Landscape Architecture: A Proposed Research Agenda for Integrated CAD & GIS in the 1990's
doi	https://doi.org/10.52842/conf.acadia.1989.227
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 227-244
summary	Conventional computer systems currently used by architecture and landscape architecture are not addressing complex decision making, system interface, dynamic manipulation and real time visualization of data. This paper identifies a strategy by which Canadian Schools could form a supportive network, incorporate and expand their research development. Within this larger framework schools would have better tools, a larger research base and access to funding as a group. The following discussion is an idea of what we at the Canadian Schools need to do differently over the next five years in our research and teaching in order to make a unique contribution to our fields.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	2728
authors	Daniell, J. and Director, S.W.
year	1989
title	An Object Oriented Approach to CAD Tool Control Within a Design Framework
source	Engineering Design Research Center, CMU, Pittsburgh, PA, USA
summary	As VLSI design frameworks evolve, a distributed control mechanism for CAD tools has become a central research issue. In this paper, we present an object oriented tool integration methodology that treats the tools as objects. This approach simplifies CAD tool control within a design framework making the framework more general, easier to use, and more capable of supporting a large population of CAD tools.
series	other
last changed	2003/04/23 15:50

_id	e33a
authors	De Cola, S., De Cola, B. and Pentasuglia, Francesco
year	1990
title	Messina 1908: The Invisible City
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 239-246
summary	The initial purposes of this work were to build a 3D model of the old city of Messina and to reconstruct a walk through it; to understand the "Ghost city," the parts that form it, and the rules of its plan, which are explicit in some cases but hidden most of the time; to measure its space, appreciate the similarities to and differences from modern city plans, and use the information to improve the plans of tomorrow. It might seem a useless study of a nonexistent city, and yet during the months of detailed work, of patient reconstruction from the surveys and photographs of the city destroyed in 1908, we began to consider how it was still possible to obtain spatial values of and to project behaviors in the lost city, in other words, to practice tests on memory that are very interesting for people working in a context in which memory no longer exists. The work presented here is the first stage of a more complex research project still to be carried out on Messina as it was at the end of the nineteenth century. Here we constructed a 3D model of some parts of the city prior to the earthquake of 1908 and made a five-minute video, using cartoon techniques, of an "impossible" walk through the city. The fragments of the city were reconstructed from available documentary sources, primarily photographic images, which tended to be of the most important places in the city.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	b66a
authors	Dvorak, Robert W.
year	1989
title	CAD Tools for Systems Theory and Bottom Up Design
doi	https://doi.org/10.52842/conf.acadia.1989.209
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 209-226
summary	The use of CAD is investigated in the teaching of systems theory to a fourth year group of design students. A comparison is made between the CAD group using MacArchitrion and a non-CAD group using traditional design methods. The paper includes a discussion of the meaning of systems design theories, relates the CAD and non-CAD student design methods and illustrates the results. It also includes recommendations for improvements so the computer can become more effective in this type of design teaching. Finally, it concludes with recommendations from the students at the end of the semester project. The basic premise for the CAD design group is that computers should encourage students to understand and use systems design theory.
series	ACADIA
last changed	2022/06/07 07:55

_id	09a5
authors	Eastman, Charles M.
year	1989
title	Building Modeling in Architectural Design
source	[8] p. : ill. Design & Computation . Los Angeles: Graduate School of Architecture and Urban Planning, UCLA, 1989? includes bibliography
summary	This paper reviews building modeling from the perspective of U.S. architectural practice. During the previous twenty years of computer-aided architectural design, the underlying paradigm has mimicked a paper-based technology. The future of design, however, is proposed to be in building modeling. A review of building modeling is provided and some prospects for architectural design, based on its concepts, are proposed
keywords	CAD, building, modeling, architecture, design
series	CADline
email
last changed	2003/05/17 10:15

_id	0642
authors	Eastman, Charles M.
year	1989
title	Why Are We Here and Where We are Going: The Evolution of CAD
doi	https://doi.org/10.52842/conf.acadia.1989.009
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 9-26
summary	This paper reviews architectural CAD in terms of its current use, development and status within the U.S. The characteristics of a new generation of architectural CAD system, called building modeling, are outlined. Criteria are developed for the evaluation of CAD systems that support building modeling. Some of the opportunities for universities growing out of building modeling are reviewed, including pedagogical implications and opportunities for research.
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: