Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 207

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	a920
authors	Kulcke, Richard
year	1989
title	CAAD in the Architectural Education of the Fachhochschulen in the Federal Republic of Germany
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.3.1
doi	https://doi.org/10.52842/conf.ecaade.1989.x.w7a
summary	For over 10 years the author has been a teacher in the field of "computer application in architecture" at the Fachhochschule. Since 1985 he regularly has been taking part in the conferences of A.I.I.D.A. (Arbeitskreis INFORMATIK IN DER ARCHlTEKTENAUSBILDUNG). All the faculties of architecture at the Fachhochschulen (about 10) can send their representatives of CAAD to the conferences. A.I.I.D.A. has been having 2 conferences a year since 1985. At the last conference in Wiesbaden a paper with statements of A.I.I.D.A. for the further education in CAAD was finished. The author presents and explains this paper. On the other hand he shows the actual education program of CAAD of his faculty. The education in CAAD started in 1972 with basic information without practical elements. Now the practical work with the workstation is talking most of the time . The computer application is available for subjects like Building Economics, Building and Structure Design and others. With his assistant the author developed programs of the field of Building Economics. In 1986 he started introduce CAD with AutoCAD in the education program. Now also other colleagues start to integrate CAAD into their subjects.
series	eCAADe
last changed	2022/06/07 07:50

_id	0e93
authors	Af Klercker, Jonas
year	1989
title	Interactive Animation on the Macintosh II
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.5.1-9.5.6
doi	https://doi.org/10.52842/conf.ecaade.1989.x.a0t
summary	The efficiency of images in communication between humans has so far been used almost exclusively by TV and other mass medias. The costs have been too great to encourage the use of images in the financially restricted everyday practice of architecture. With a range of application programs for the Apple Macintosh II the vision has come close to reality. It is now possible to create guided walks with the chance to choose different routes and views in a model of buildings and surroundings in 256 colour graphics. The makers of these programs may not have foreseen this use for their products and that is why it takes quite a lot of effort to make all the necessary images. With some supplementary routines however, this will be made much easier. Animation can also be used to visualize different processes inside a building. We have been studying the working environment in mechanical industry. The goal of this project is to make communication possible between the workers at all levels of an organization in planning changes and has so far been very successful. The use of this technique is only limited by our imagination and funding. Some examples to be tested in the near future are "Escape at a fire", "Animation of a Dairy", "Traffic situations in a parking lot-, "CAD-working place" and others. One of the difficulties in interactive planning with users has been to come close enough to their reality. With animated images it is possible to visualize what is going to happen and what it is going to look like in a more understandable way. In education this must be a challenging possibility. Changes and processes are some of the most difficult subjects to describe and explain! The software used is a handful of individual programs which, thanks to the graphics standards of the Macintosh, can exchange data with each other.
series	eCAADe
email
more	http://www.caad.lth.se/
last changed	2022/06/07 07:50

_id	a74a
authors	Asanowicz, Alexander
year	1989
title	Four Easy Questions
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.18.1-9.18.4
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x8v
summary	Should we teach CAAD? - yes, but why? Answer to this question is clear too. Question three - "when?" - on the 5, 6 and 7 term. Why so rate? - it is a compromise because "Architecture is an art" and students of architecture should know how to make a project without computers. How to teach CAAD? - we should teach haw to use professional computer programs and not programming. We must work out a new manual for architects. It should be constructed in such a way as to correspond to consecutive steps of the architectural design process.
keywords	CAAD, Manuals, Architectural Design Process
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6bfa
authors	Bijl, Aart
year	1989
title	Evaluation and Representation
source	December, 1989. 11 p. : ill. includes bibliography
summary	In this paper the author will consider four key concepts: design, evaluation, models, and representation. In combination, definitions of these concepts impinge on each other and they are further conditioned by the author intention to represent design knowledge within computers. The issue of human-computer interaction then becomes critical to the usefulness of knowledge representations for designers
keywords	CAD, representation, design, evaluation
series	CADline
last changed	1999/02/12 15:07

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	417a
authors	Cipriani, R., Lagomarsino, A.D., Stagnaro, A., Valenti, E. and Sambolino, T.
year	1990
title	Some Years' Experience Teaching CAAD
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 347-361
summary	In the conventional way of teaching architecture, it is common to think of design as the final synthesis of an intellectual process (composizione in Italian) integrating different elements from different curriculum subjects: history, structural analysis., technology, regional and urban planning, and so on. These elements, being comprehensive of their specific domains, together build the project. This process is supported by a long traditional that cannot easily be modified; however, we must not consider it to be the only one. Architectural practice should be much more. The Scuole di Architettura has walked a long and difficult road in the last thirty years., with a significant widening of interest in social, political, and economic issues. There have been recurring attempts at epistemological reformulation in some areas. There has been an acknowledgment of a crisis in contemporary town planning and a dimming of several certitudes that had developed with the birth and growth of the modernist school. And there has been a weakening of the promises that had given life to the vigorous discussion about town and regional planning. All of this leads to a reconsideration of the meaning and the deeper assumptions that the project implies, a question mark at the center of the human sciences that architectural practice involves. The old tradition., which assigned composition a central role in the project, is no longer sufficient because it is related to a reductive reading of epistemology that views human sciences as defining segments of physical knowledge of the actual world. Contemporary reflection on the difference between understanding and unfolding, together with the attention given to interpreting a moment as compared to purely describing one, gives to the project the task of inquiry instead of solution.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	25de
authors	Ervamaa, Pekka
year	1993
title	Integrated Visualization
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 157-160
summary	The Video and Multimedia studio at VTT, Technical Research Centre of Finland, started with endoscopy photography of scale models. Video recordings has been made since 1985 and computer graphic since 1989. New visualization methods and techniques has been taken into use as a part of research projects, but mainly we have been working with clients commissions only. Theoretical background for the visualizations is strong. Research professor Hilkka Lehtonen has published several papers concerning the theory of visualization in urban planning. This studio is the only professional level video unit at Technical Research Centre, which is a large polytechnic research unit. We produce video tapes for many other research units. All kind of integrated methods of visualization are useful in these video productions, too.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	a672
authors	Flemming, Ulrich
year	1990
title	Syntactic Structures in Architecture: Teaching Composition with Computer Assistance
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 31-48
summary	The present paper outlines a plan for the teaching of architectural composition with computer assistance.The approach is to introduce students to a series of architectural languages characterized by a vocabulary of elements and a grammar whose rules indicate how these elements can be placed in space. Exercises with each language include the analysis of precedents; the generation of forms using a given rule set; and follow-up studies with an expanded rule set. The paper introduces languages and exercises through illustrative examples. This architectural content can be taught in the traditional way. The use of computers is motivated by expectations which are stated, and some basic requirements for the needed software are listed. Work to develop this software has started.
series	CAAD Futures
email
last changed	2003/02/26 17:24

_id	4f00
authors	Gero, John S. and Sudweeks, F. (editors)
year	1989
title	Expert Systems in Engineering, Architecture and Construction
source	360 p University of Sydney: 1989. CADLINE has abstract only.
summary	Engineering involves both cognitive and calculational processes. It involves judgement as well as numeracy. Cognitive processes and judgement are better served by expert systems than other existing technologies. Expert systems are not designed to replace technologies currently used in engineering, rather they are and will continue to augment them. Clearly, better tools are needed and further education of engineers is needed. This conference aims to provide a forum for the presentation of developments and applications of expert systems in engineering, primarily in Australasia. The 20 papers accepted for presentation span the spectrum of engineering applications of expert systems from analysis and diagnosis, through simulation and modeling, learning, to design and synthesis
keywords	expert systems, knowledge base, design process, architecture, structures, engineering, construction, analysis, simulation, modeling, learning, synthesis
series	CADline
email
last changed	2003/06/02 13:58

_id	c0a3
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1989
title	Component Based Computer Aided Learning for Students of Architecture and Civil Engineering
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 193-208
doi	https://doi.org/10.52842/conf.acadia.1989.193
summary	The paper describes the methodology and the current efforts to develop an interdisciplinary computer aided learning system for architects and civil engineers. The system being developed incorporates a component oriented relational database with an existing interactive 3-dimensional modeling system developed in the School of Architecture and Planning at SUNY Buffalo. The software will be used in existing courses in architecture and civil engineering as a teaching aid to help students understand the complex 3-dimensional interrelationships of structural components. Initial implementation has focused on the modeling of the components and assemblies for a lowrise steel frame structure. Current implementation efforts are focusing on the capability to view connections in various ways including the ability to "explode" a connection to better understand the sequence of construction and load paths. Appropriate codes, limit states of failure and specific data will be linked to each specific component in an expert system shell so that the system can offer feedback about a student generated connection and perhaps offer other possible connections a library of standard connections. Future expansion of the system will include adding other "systems" of a building, such as mechanical, electrical, plumbing, enclosure etc., to help students visualize the integration of the various parts.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	acadia06_079
id	acadia06_079
authors	Kumar, Shilpi
year	2006
title	Architecture and Industrial Design A Convergent Process for Design
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 79-94
doi	https://doi.org/10.52842/conf.acadia.2006.079
summary	The use of technology has grown with the way design professions have evolved over time. Changing needs, desires of comfort, and perceptions of the consumers have led to a distinct improvement in the design of both product and architecture. The use of the digital media and emerging technologies has brought a dramatic change to the design process allowing us to view, feel, and mould a virtual object at every stage of design, development, and engineering. Change is often quick and easy since a virtual product does not inherently carry the biases of its physical counterpart. In order to communicate ideas across the team, digital processes are also used to bring together opinions, experiences, and perspectives. These methods encourage decision making based on information rather than prejudice or instinct. Thus, digital exchanges (technology) impact firm strategies at three levels: product, process, and administrative or support activities (Adler 1989).Digital tools for design exchange in Industrial Design (ID) began much earlier than many other professions. The profession of Architecture is also slowly moving to a similar model with digital exchange finding increasing prevalence in drawing, modeling, performance simulation, design collaboration, construction management, and building fabrication. The biggest problem is the disintegrated use of technology in the architectural profession without a strategy toward streamlining the design process from conception to fabrication. In this paper we investigate how the use of technology has evolved in the professions of Industrial Design and Architecture comparatively in their product, process, and support activities. Further, we will present a set of guidelines that will help architects in the convergence of design process, helping in a more efficient work flow with a strategic use of digital technology.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	cbdd
authors	Lawson, Bryan and Scott, Peter
year	1989
title	An Intelligent Tutoring System for Teaching CAD
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 3.1.1-3.1.13
doi	https://doi.org/10.52842/conf.ecaade.1989.x.r4f
summary	The paper raises some general problems concerning the teaching of CAAD both in schools of architecture and in practice. A new, less 'system-oriented' approach is suggested and some ideas for the design of a computer based intelligent tutoring system are advanced. Some prototype elements of the tutor will be described.
series	eCAADe
last changed	2022/06/07 07:50

_id	69b2
authors	McCartney, Allan
year	1989
title	Terrain Modelling Using AutoCad
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.4.1-9.4.8
doi	https://doi.org/10.52842/conf.ecaade.1989.x.w0q
summary	This paper describes the use of a widely-used CAD drafting system, in conjunction with a specialist contouring package, to provide a low-cost facility for terrain modelling, volumetric calculation, and landscape visualisation. One such system is in use at the Department of Architecture & Landscape, Manchester Polytechnic, to enable graduate students on the Landscape Design course to explore the visual and quantitative implications of design proposals, particularly when related to large scale landscape modelling. It is also in commercial use by professional surveyors, waste management contractors, local authorities etc. In addition to AutoCAD, two further packages are employed, one to recover coordinates from existing AutoCAD drawings, and the other to generate contours and volumes from those, or other coordinate data files. The first known as BADGER (Basic AutoCAD Data Grabber & Exchange Routine), and the other is SURVCAD CONTOURS - a contouring program capable of converting large coordinate data files (2500 + points) to a 2.5D terrain model.
keywords	Terrain Modelling, Landscape Visualisation, CAD, Volumetrics
series	eCAADe
last changed	2022/06/07 07:50

_id	8bf3
authors	McCullough, M., Mitchell, W.J. and Purcell, P. (Eds.)
year	1990
title	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [Conference Proceedings]
source	International Conference on Computer-Aided Architectural Design 1989/ ISBN 0-262-13254-0] (Massachusetts / USA), 1989, 505 p.
summary	Design is the computation of shape information that is needed to guide fabrication or construction of artifacts. But it is not so straightforward as, say, the computation of numerical information required to balance a checkbook. This is partly because algebras of shapes are not as well understood and precisely formalized as algebras of numbers, partly because the rules for carrying out shape computations tend to be fluid and ill defined and partly because the predicates that must be satisfied to achieve successful termination are often complex and difficult to specify. For centuries architects have carried out shape computations by hand, using informal procedures and the simplest of tools. Over the last two decades though, they have made increasing use of more formal procedures executed by computers. It is still too early to be sure of the gains and losses that follow from this development, but there is no doubt that it raises some challenging questions of architectural theory and some perplexing issues for those concerned with the future of architectural education. This book frames those issues and provides a diversity of perspectives on them. Its contents were initially presented at the CAAD Futures 89 Conference-an international gathering of researchers and teachers in the field of computer-aided architectural design which was jointly sponsored by the Harvard Graduate School of Design and the MIT Department of Architecture and held in Cambridge, Massachusetts, in July 1989. There are four major sections: Theoretical Foundations, Knowledge-Based Design Tools, Information Delivery Systems, and Case Studies: Electronic Media in the Design Studio. In a representative collection of current views, over thirty extensively illustrated papers discuss the experiences of universities in the USA, Europe, Japan, Israel, Canada, and Australia, articulate present theoretical and practical concerns, provide criticism of media and methods, and suggest directions for the future. Architectural educators and architects concerned with the effect of computer technology on the design process will find here an indispensable reference and a rich source of ideas. This book was itself prepared in an electronic design studio. Composition and typography, most image collection and placement, and such editing as was practical within this publishing format, were all performed digitally using Macintosh computers at the Harvard Graduate School of Design during a period of a few weeks in 1989.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	765e
authors	Mumma, S.A. and Bolin, R.J.
year	1997
title	Energy optimized-ventilation constrained variable air volume system control
source	Automation in Construction 6 (5-6) (1997) pp. 463-470
summary	The analytical energy performance of an advanced energy optimized-ventilation constrained control approach to variable air volume systems was compared to four other controls. The other controls are either currently used or have been proposed in the literature. The advanced control demonstrated its potential to meet the ventilation requirements of ASHRAE Standard 62-1989 for every zone of the building with minimal energy consumption. The analytical work was carried out in a single story prototypical commercial building. The building was analyzed in five US cities to provide insight into the impact of climate on the performance of the advanced control. The advanced control consumed less total energy, considerably less in some cities, than the other four controls. The advanced control provides an excellent opportunity to apply to buildings new automation equipment and software never attempted before.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	86ad
authors	Pittioni, Gernot
year	1989
title	CAAD at the Technical University of Munich - Features of Education and Research
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.4.1-4.4.7
doi	https://doi.org/10.52842/conf.ecaade.1989.x.w4j
summary	The educational outlines used by the German, and most other European schools of architecture, have certain differences in comparison to an American school. This is partly due to the different tasks each group has to fulfill. Our architects not only plan their projects in detail, but in many cases they have to supervise the site as well. Most importantly, they also check on all communications between those participating in the design process. Skills of architects leaving their schools and entering into practical life generally need further training. Since CAAD is becoming more and more involved in architectural design studios of various sizes, the development of skills in this area should be shifted towards the period of studies. Thus, schools and staffs have to react to meet the needs of the present facts.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	6dc2
authors	Rahman, Shama
year	1989
title	The Realities of Introducing IT/CAD in Architectural and Interior Design Education: A Case Study at the Polytechnic of North London
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 4.1.1.-4.1.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.j5h
summary	This paper is an attempt to illustrate the realities of introducing Information Technology at a school of Architecture and Interior Design. The department, under the auspicies of the Polytechnic of North London, comprises of 520 full/part time students working towards various professional and postgraduate degrees and diplomas in Architecture and Interior Design. For the last 18 months, the department has undertaken a rapid IT/CAD implementation programme. This has involved developing a strategy, formulating resource needs and implementing teaching. The strategy is based on the concept of application of IT as a tool for design and a medium for representation, management, use and exchange of design information. A course outline has been developed suggesting what could be taught and who could be taught what, how, when and for how long. At the same time, different types of teaching methods are being experimented upon. On the basis of these factors, attempts are being made to meet resource needs for software, hardware, teaching and technical support. Various issues and problems have been brought to light e.g. overcoming cost of hardware and software, lack of teaching and technical support, finding time slots in overloaded curriculums, changing existing attitudes towards IT,etc. We have approached these problems in various ways. We liaise closely with architects' offices, and try to use student skills and expertise within the polytechnic. We try to overcome time-slot problems by joint teaching and assessment with other subjects and try to integrate IT/CAD with studio-based design projects by locating computlng facilities inside studios. This paper is a story of how we have set for ourselves a path to follow. This path is by no means rigid and will continuously change with new experiences and the demands of a volatile industry. We have only just begun.
series	eCAADe
last changed	2022/06/07 07:50

_id	1920
authors	Riesbeck, C. and Schank, R.C.
year	1989
title	Inside Case-based Reasoning
source	Lawrence Erlbaum Associates, Hillsdale, NJ
summary	Case-based reasoning, broadly construed, is the process of solving new problems based on the solutions of similar past problems. An auto mechanic who fixes an engine by recalling another car that exhibited similar symptoms is using case-based reasoning. A lawyer who advocates a particular outcome in a trial based on legal precedents is using case-based reasoning. It has been argued that case-based reasoning is not only a powerful method for computer reasoning, but also a pervasive behavior in everyday human problem solving. Case-based reasoning (CBR) has been formalized as a four-step process:N 1. Retrieve: Given a target problem, retrieve cases from memory that are relevant to solving it. A case consists of a problem, its solution, and, typically, annotations about how the solution was derived. For example, suppose Fred wants to prepare blueberry pancakes. Being a novice cook, the most relevant experience he can recall is one in which he successfully made plain pancakes. The procedure he followed for making the plain pancakes, together with justifications for decisions made along the way, constitutes Fred's retrieved case. 2. Reuse: Map the solution from the previous case to the target problem. This may involve adapting the solution as needed to fit the new situation. In the pancake example, Fred must adapt his retrieved solution to include the addition of blueberries. 3. Revise: Having mapped the previous solution to the target situation, test the new solution in the real world (or a simulation) and, if necessary, revise. Suppose Fred adapted his pancake solution by adding blueberries to the batter. After mixing, he discovers that the batter has turned blue -- an undesired effect. This suggests the following revision: delay the addition of blueberries until after the batter has been ladled into the pan. 4. Retain: After the solution has been successfully adapted to the target problem, store the resulting experience as a new case in memory. Fred, accordingly, records his newfound procedure for making blueberry pancakes, thereby enriching his set of stored experiences, and better preparing him for future pancake-making demands. At first glance, CBR may seem similar to the rule-induction algorithmsP of machine learning.N Like a rule-induction algorithm, CBR starts with a set of cases or training examples; it forms generalizations of these examples, albeit implicit ones, by identifying commonalities between a retrieved case and the target problem. For instance, when Fred mapped his procedure for plain pancakes to blueberry pancakes, he decided to use the same basic batter and frying method, thus implicitly generalizing the set of situations under which the batter and frying method can be used. The key difference, however, between the implicit generalization in CBR and the generalization in rule induction lies in when the generalization is made. A rule-induction algorithm draws its generalizations from a set of training examples before the target problem is even known; that is, it performs eager generalization. For instance, if a rule-induction algorithm were given recipes for plain pancakes, Dutch apple pancakes, and banana pancakes as its training examples, it would have to derive, at training time, a set of general rules for making all types of pancakes. It would not be until testing time that it would be given, say, the task of cooking blueberry pancakes. The difficulty for the rule-induction algorithm is in anticipating the different directions in which it should attempt to generalize its training examples. This is in contrast to CBR, which delays (implicit) generalization of its cases until testing time -- a strategy of lazy generalization. In the pancake example, CBR has already been given the target problem of cooking blueberry pancakes; thus it can generalize its cases exactly as needed to cover this situation. CBR therefore tends to be a good approach for rich, complex domains in which there are myriad ways to generalize a case.
series	other
last changed	2003/04/23 15:14

_id	026a
authors	Saggio, Antonino
year	1989
title	Extrusion, Assemblage, Joint and Connection in the Workshop for Gas Production by Giuseppe Terragni
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.16.1-9.16.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.g7l
summary	Turning over the catalogues' pages of the first show of rational architecture, the strongly contrasting pictures of the model presented by Terragni remain impressive. The project for a "Workshop for Gas Production", designed by the 23 year old architect from Como, reveals the presence of an early talent and the originality of his research. Although inspired by the contemporary European architecture, the work of Terragni does not attempt to academically repeat former precedents. Although Terragni's project and many among the other exhibited works share an analogy of forms, the syntax of the Como architect appears more mature and complex. This essay and the accompanying original drawings are dedicated to the de-constructivist nature of the design operations as well as to the clarification of the messages embodied in the specific program.
keywords	Terragni, Italian Rationalist Architecture, Interactive Lesson
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: