Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 262

Reformat results as: short short into frame detailed detailed into frame

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	04aa
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1990
title	Building Representation within a Component Based Paradigm
doi	https://doi.org/10.52842/conf.acadia.1990.117
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 117-127
summary	This paper questions the use of a 2-dimensional medium to convey 3-dimensional information about design intent and proposes a computer-aided paradigm that could radically alter the way in which buildings are designed and built. The paradigm is centered about the accurate and rational representation (Rush, 86) of each individual component that makes up a building in a single, shared, computer based model. The single model approach couples the accurate physical representation of components with the accurate representation of technical information and knowledge about the assemblies of building components. It is anticipated that implementation of this approach will result in fewer communication problems that currently plague the fragmented process of practicing in the professions of architecture and engineering. The paper introduces the basic concepts within the paradigm and focuses on the development of intuitive, reasoning about the component-based design suitable for incorporation in a computer-aided setting.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	c5bb
authors	Hirschberg, U., Meister, M. and Neumann, F.
year	1993
title	Processing of Geographic Data for CAAD-supported Analysis and Design of Urban Development Areas
doi	https://doi.org/10.52842/conf.ecaade.1993.x.w2h
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The interdisciplinary research project aims at the development of a hard- and software environment to support the representation, analysis, manipulation and design of urban development areas for architects and city planners. It was started in 1990 and involves three groups at the ETH Zurich: Architecture/Urban design - Processing of Geographic Data/Photogrammetry -Computer Sciences/CAAD. The first part of this paper will give an introduction to the goals and implications of the project by comparing it with a similar project one of the authors took part in as a student. Then the paper gives a brief description of the work of the three groups involved, an overview of the methods they employed and the results that were achieved. The main focus will be on the work of the CAAD group . Finally some conclusions are drawn and problems are discussed. The future work includes the testing of the tool by students during the winter term 1993/94.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	dfec
authors	Hornyanszky-Dalholm, Elisabeth and Rydberg-Mitchell, Birgitta
year	1991
title	THE FULL-SCALE METHOD AS A TOOL FOR PARTICIPATION
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 23-30
summary	In Lund the full-scale laboratory is mainly used as a tool for citizen or user participation. Our intention is to develop the full-scale method further for this purpose. For several years now, we have carried through projects together with different users - mainly people from various types of working-places but recently also with dwellers. Most of our work has been financed by our clients, i.e. private enterprises, trade unions, county councils or municipalities, but since this summer we also receive support from the Swedish Council for Building Research. We have worked with many types of environments and their specific problems, but thanks to the research money we will now have an opportunity to develop our method in a more conscious manner. The purpose of our research is to increase the awareness of the different mechanisms involved in the participant/user process. We want to improve and refine our method and evaluate its advantages and disadvantages compared to other media for spatial communication. In our research program we will now present some criteria that have developed from our previous experiences and which we find essential to our future work.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:16

_id	01ba
authors	Hyde, Richard and Boon Lay, Ong
year	1990
title	Design Problems and Evaluative Strategies Using CAAD
source	February, 1990. 16 p. : col. ill. includes bibliography
summary	The way architects design comes into sharp focus when developing strategies for evaluating buildings. Architectural design is a highly subjective activity on the one hand but on the other it is also highly objective. The paper examines the use of CAAD systems for objective evaluation while also recognizing that this kind of evaluation has to be related to the subjective aspects of the design. In order to examine this, further research has been carried out into the use of CAAD systems to evaluate sunshading characteristics in a building design problem. The approach utilized the Integraph AMOD software to generate three dimensional models of the design proposal which were then tested using the Integraph Model View software which has a sunshading facility. The utility of this approach was tested first against criteria of how accurate the computer was in giving meaningful feedback to the designer. Secondly, how productive this approach was in the design process as compared to traditional techniques using instruments such as the heliodon. Finally, a discussion of the developments of the approach is given
keywords	design, CAD, evaluation, computer graphics, applications
series	CADline
last changed	2003/06/02 10:24

_id	e892
authors	Kacmar, Charles John
year	1990
title	PROXHY: a Process -Oriented Extensible Hypertext Architecture
source	Texas A&M University
summary	This research describes a new architecture for hypertext environments. The architecture merges the process, object-oriented, and hypertext models to provide hypertext services to object-based, distributed, application components. Through this architecture, applications are integrated to form a comprehensive hypertext computing environment, allowing links to connect applications or objects in different applications. The architecture separates hypertext and application functionality so that multiple applications can use the facilities of a common hypertext layer. The design of the architecture is such that components can be extended or tailored in order to support future applications, multimedia objects, or the needs of specific applications or users. The process-based, object-oriented framework allows objects of arbitrary complexity to live and interact in a hypertext world. Additionally, the protocol and facilities which support component interaction provide location transparency, arbitrary object granularity, and parallel computation over a network. This dissertation provides a conceptual model of hypertext and a general architecture for hypertext system construction. Related literature from object-oriented programming, operating systems, multimedia applications, and database is discussed in terms of the architecture. A hypertext data model, computational model, and hypertext system taxonomy are used to discuss the capabilities of current hypertext systems. Interaction scenarios are provided in order to illustrate object interaction and the distribution of work among the components of the architecture. A prototype system, implemented to demonstrate the feasibility of the architecture, is discussed. The prototype illustrates all aspects of the architecture including distributed application and hypertext components, cross-application linking, and anchors acting as proxy objects for applications. Application scenarios, problems and limitations, and future research issues provide an understanding of the power of the architecture and its potential for impacting the design of next-generation hypertext systems.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	6259
authors	Kalay, Yehuda E. and Majkowski, Bruce R.
year	1990
title	CAD Technology Transfer: A Case Study
doi	https://doi.org/10.52842/conf.acadia.1990.133
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 133-143
summary	Transferring innovative university-based research results to the industry or practice that will ultimately use them is an arduous, time-consuming effort. One way to effect this technology transfer is to develop a demonstrable prototype product and then find or form a corporation that can expand the prototype into a full product and market it to the profession. Another way, which can shorten the transfer process, is to "sell" the idea, rather than the product, to a corporation that has the vision, the resources and the technical competency to support its development, with the intent to eventually market it. In this paper, we describe a case study of this latter approach, based on our seven year experience of researching, developing and transferring innovative architectural CAD technology. We describe the birth, growth, and maturity of Worldview, a computer-aided design and modeling system for use by architects. The project was initiated in 1983, and went through five software versions, numerous grants and grant extensions, two granting corporations, and extensive field testing. The software has developed into a mature system, with sufficient functionality appropriate for commercial distribution. The paper describes not only the factual chronology of the project, but also highlights the advantages and drawbacks of market-oriented university research. We conclude with suggestions as to how the process may be improved, and how problems and obstacles can be minimized.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	8833
authors	Kalay, Yehuda E., Swerdloff, Lucien M. and Majkowski, Bruce R. (et al)
year	1990
title	Process and Knowledge in Design Computation
source	Journal of Architectural Education. February, 1990. includes bibliography
summary	The challenge of understanding the many facets of design has been a central issue in attempting to computationally define design processes and knowledge. The historical progression of computers in design has been characterized by high aspirations repeatedly humbled by the complexity of design problems. Fundamental questions concerning the role and impact of computers in design should be re-examined in light of new developments in Computer-Aided Design (CAD) and Artificial Intelligence (AI), and the progressive understanding of design itself. At the heart of these issues must lie a mutual understanding of the respective traits of design and computation, and the balance of interaction between them. In this paper two avenues, expressed in terms of mappings between design and computation, are explored with the intention of clarifying the relationship between the theories of design and computation. First, the relationship between models of the design process and computational search strategies is explored. Several paradigms (problem solving, puzzle making, and constraint satisfying), which demonstrate a breadth of approaches to modeling design, are presented along with their computational implications. Second, relationships between design knowledge and computational representation schemes are discussed. Emphasis is placed on drawing from cognitive and computational knowledge representation schemes to represent design knowledge. Finally, some thoughts on integrating these design models and knowledge representation schemes into computer systems to assist designers are discussed
keywords	design process, knowledge, representation, architecture
series	CADline
email
last changed	2003/06/02 13:58

_id	06e1
authors	Keul, Alexander
year	1996
title	LOST IN SPACE? ARCHITECTURAL PSYCHOLOGY - PAST, PRESENT, FUTURE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	A methodological review by Kaminski (1995) summed up five perspectives in environmental psychology - patterns of spatial distribution, everyday “jigsaw puzzles”, functional everyday action systems, sociocultural change and evolution of competence. Architectural psychology (named so at the Strathclyde conference 1969; Canter, 1973) as psychology of built environments is one leg of environmental psychology, the second one being psychology of environmental protection. Architectural psychology has come of age and passed its 25th birthday. Thus, a triangulation of its position, especially in Central Europe, seems interesting and necessary. A recent survey mainly on university projects in German-speaking countries (Kruse & Trimpin, 1995) found a marked decrease of studies in psychology of built environments. 1994, 25% of all projects were reported in this category, which in 1975 had made up 40% (Kruse, 1975). Guenther, in an unpublished survey of BDP (association of professional German psychologists) members, encountered only a handful active in architectural psychology - mostly part-time, not full-time. 1996, Austria has two full-time university specialists. The discrepancy between the general interest displayed by planners and a still low institutionalization is noticeable. How is the research situation? Using several standard research data banks, the author collected articles and book(chapter)s on architectural psychology in German- and English-language countries from 1990 to 1996. Studies on main architecture-psychology interface problems such as user needs, housing quality evaluations, participatory planning and spatial simulation / virtual reality did not outline an “old, settled” discipline, but rather the sketchy, random surface of a field “always starting anew”. E.g., discussions at the 1995 EAEA-Conference showed that several architectural simulation studies since 1973 caused no major impact on planner's opinions (Keul&Martens, 1996). “Re-inventions of the wheel” are caused by a lack of meetings (except this one!) and of interdisciplinary infrastructure in German-language countries (contrary to Sweden or the United States). Social pressures building up on architecture nowadays by inter-European competition, budget cuts and citizen activities for informed consent in most urban projects are a new challenge for planners to cooperate efficiently with social scientists. At Salzburg, the author currently manages the Corporate Design-process for the Chamber of Architecture, Division for Upper Austria and Salzburg. A “working group for architectural psychology” (Keul-Martens-Maderthaner) has been active since 1994.
keywords	Model Simulation, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2005/09/09 10:43

_id	ab9c
authors	Kvan, Thomas and Kvan, Erik
year	1999
title	Is Design Really Social
source	International Journal of Virtual Reality, 4:1
summary	There are many who will readily agree with Mitchell's assertion that "the most interesting new directions (for computer-aided design) are suggested by the growing convergence of computation and telecommunication. This allows us to treat designing not just as a technical process... but also as a social process." [Mitchell 1995]. The assumption is that design was a social process until users of computer-aided design systems were distracted into treating it as a merely technical process. Most readers will assume that this convergence must and will lead to increased communication between design participants, that better social interaction leads to be better design. The unspoken assumption appears to be that putting the participants into an environment with maximal communication channels will result in design collaboration. The tools provided, therefore, must permit the best communication and the best social interaction. We see a danger here, a pattern being repeated which may lead us into less than useful activities. As with several (popular) architectural design or modelling systems already available, however, computer system implementations all too often are poor imitations manual systems. For example, few in the field will argue with the statement that the storage of data in layers in a computer-aided drafting system is an dispensable approach. Layers derive from manual overlay drafting technology [Stitt 1984] which was regarded as an advanced (manual) production concept at the time many software engineers were specifying CAD software designs. Early implementations of CAD systems (such as RUCAPS, GDS, Computervision) avoided such data organisation, the software engineers recognising that object-based structures are more flexible, permitting greater control of data editing and display. Layer-based systems, however, are easier to implement in software, more familiar to the user and hence easier to explain, initially easier to use but more limiting for an experienced and thoughtful user, leading in the end to a lesser quality in resultant drawings and significant problems in output control (see Richens [1990], pp. 31-40 for a detailed analysis of such features and constraints). Here then we see the design for architectural software faithfully but inappropriately following manual methods. So too is there a danger of assuming that the best social interaction is that done face-to-face, therefore all collaborative design communications environments must mimic face-to-face.
series	journal paper
email
last changed	2003/05/15 10:29

_id	cf2011_p093
id	cf2011_p093
authors	Nguyen, Thi Lan Truc; Tan Beng Kiang
year	2011
title	Understanding Shared Space for Informal Interaction among Geographically Distributed Teams
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 41-54.
summary	In a design project, much creative work is done in teams, thus requires spaces for collaborative works such as conference rooms, project rooms and chill-out areas. These spaces are designed to provide an atmosphere conducive to discussion and communication ranging from formal meetings to informal communication. According to Kraut et al (E.Kraut et al., 1990), informal communication is an important factor for the success of collaboration and is defined as ‚Äúconversations take place at the time, with the participants, and about the topics at hand. It often occurs spontaneously by chance and in face-to-face manner. As shown in many research, much of good and creative ideas originate from impromptu meeting rather than in a formal meeting (Grajewski, 1993, A.Isaacs et al., 1997). Therefore, the places for informal communication are taken into account in workplace design and scattered throughout the building in order to stimulate face-to-face interaction, especially serendipitous communication among different groups across disciplines such as engineering, technology, design and so forth. Nowadays, team members of a project are not confined to people working in one location but are spread widely with geographically distributed collaborations. Being separated by long physical distance, informal interaction by chance is impossible since people are not co-located. In order to maintain the benefit of informal interaction in collaborative works, research endeavor has developed a variety ways to shorten the physical distance and bring people together in one shared space. Technologies to support informal interaction at a distance include video-based technologies, virtual reality technologies, location-based technologies and ubiquitous technologies. These technologies facilitate people to stay aware of other‚Äôs availability in distributed environment and to socialize and interact in a multi-users virtual environment. Each type of applications supports informal interaction through the employed technology characteristics. One of the conditions for promoting frequent and impromptu face-to-face communication is being co-located in one space in which the spatial settings play as catalyst to increase the likelihood for frequent encounter. Therefore, this paper analyses the degree to which sense of shared space is supported by these technical approaches. This analysis helps to identify the trade-off features of each shared space technology and its current problems. A taxonomy of shared space is introduced based on three types of shared space technologies for supporting informal interaction. These types are named as shared physical environments, collaborative virtual environments and mixed reality environments and are ordered increasingly towards the reality of sense of shared space. Based on the problem learnt from other technical approaches and the nature of informal interaction, this paper proposes physical-virtual shared space for supporting intended and opportunistic informal interaction. The shared space will be created by augmenting a 3D collaborative virtual environment (CVE) with real world scene at the virtual world side; and blending the CVE scene to the physical settings at the real world side. Given this, the two spaces are merged into one global structure. With augmented view of the real world, geographically distributed co-workers who populate the 3D CVE are facilitated to encounter and interact with their real world counterparts in a meaningful and natural manner.
keywords	shared space, collaborative virtual environment, informal interaction, intended interaction, opportunistic interaction
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	0565
authors	Oxman, Robert and Oxman, Rivka
year	1990
title	The Computability of Architectural Knowledge
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 171-185
summary	In an important contribution to the theoretical foundation of design computing, Mitchell noted "an increasingly urgent need to establish a demonstrably sound, comprehensive, rigorously formalized theoretical foundation upon which to base practical software development efforts" (Mitchell, 1986). In this paper we propose such a theoretical framework. A basic assumption of this work is that the advancement of design computing is dependent upon the emergence of a rigorous formulation of knowledge in design. We present a model of knowledge in architectural design which suggests a promising conceptual basis for dealing with knowledge in computer-aided design systems. We require models which can represent the formal knowledge and manipulative operations of the designer in all of their complexity-that is formal models rather than just geometric models. Shape Grammars (Stiny,1980) represent an example of such models, and constitute a relatively high level of design knowledge as compared to, for example, use of symmetry operations to generate simple formal configurations. Building upon an understanding of the classes of design knowledge as the conceptual basis for formal modeling systems may contribute a new realization of the potential of the medium for design. This will require a comprehensive approach to the definition of architectural and design knowledge. We consider here the implications of a well-defined body of architectural and design knowledge for design education and the potential mutual interaction-in a knowledge-rich environment-of design learning and CAAD learning. The computational factors connected with the representation of design knowledge and its integration in design systems are among the key problems of CAAD. Mitchell's model of knowledge in design incorporates formal knowledge in a comprehensive, multi-level, hierarchical structure in which types of knowledge are correlated with computational concepts. In the main focus of this paper we present a structured, multi-level model of design knowledge which we discuss with respect to current architectural theoretical considerations. Finally, we analyze the computational and educational relevance of such models.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4ec7
authors	Papper, Mike
year	1990
title	Using high-level constraints to aid space planning applications in computer-aided design
source	University of Toronto, Department of Computer Science
summary	This thesis describes a system that aids in solving space planning and layout design problems through an innovative use of constraints. Space planning problem solving is aided by constrained manipulation, a trial-and-error approach, and modelling the scaling properties of objects. Constraints are used to model various physical properties of solid objects (including gravity and friction) and to control the way in which objects scale. The system runs on a Silicon Graphics workstation supporting interactive, real-time, 3-dimensional graphics that aid in visualizing designs. The problems handled by our prototype are restricted to objects representable with rectangular solids oriented along the cartesian axes. This system was used by designers and novice computer users to solve a studio layout problem. Constraints were found to aid in the manipulation of objects by providing predictable behaviour for objects. The test results indicate that subjects learn the behaviour of objects easily and use this information in useful ways. In addition, there are indications that constraints can reduce users' cognitive loads at the user interface level. The coupling of constraints with the interactive, 3-dimensional aspect of the system encourages the use of the system at earlier stages of the design process than simple geometric drafting systems. (Abstract shortened by UMI.)
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	c4e4
authors	Robinson, Julia W.
year	1990
title	Architectural Research : Incorporating Myth and Science
source	Journal of Architectural Education November, 1990. vol. 44: pp. 20-32 : ill. includes bibliography.
summary	Despite an apparently common assumption that science and myth are totally incompatible approaches to architecture, especially as related to architectural design, the author argues that science and myth are both explanations of phenomena, each different, but both valid. Positing the desirability of a research and design process that would take advantage of both approaches, it addresses the problems of existing conceptual categories and the possible productive relationship between myth and science for architecture. Anthropology is then proposed as a paradigm for an architectural research that could address both science and myth, and this is illustrated with examples of research and design studio instruction
keywords	education, architecture, research, design process
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2007_af89
id	sigradi2007_af89
authors	Rodrigues, Gelly; Gabriela Celani
year	2007
title	Cognitive modeling of the creative process in architecture by means of the object-oriented programming technique [Modelagem cognitiva do processo criativo em arquitetura por meio da técnica de programação orientada a objetos]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 275-279
summary	The aim of this research was to investigate the relationship between the object-oriented paradigm and the design process in architecture. The work was inspired by Mitchell´s (1990) comparison between architectural types and classes of objects. An analogy was set between the development of classes and the structuring of design problems based on architectural typologies. The method was then compared to Alexander´s (1964) in terms of levels of abstraction. Two classes were implemented, illustrating the application of the object-oriented paradigm in architectural design. The method developed is expected to help architects develop a new understanding of the design process.
keywords	Design process; design method; object-oriented programming
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	9a86
authors	Romiszowski, A.J.
year	1990
title	Designing Instructional Systems
source	Kogan Page Ltd, London
summary	Deals with the major areas of decision making that face the instructional designer at the beginning of a project; establishing the needs and developing the objectives of a curriculum, and producing detailed plans for the structure, methods and evaluation system to be used. The book establishes basic principles from an analysis of current theory and practice. The author complements this with practical advice, presenting useful techniques for analyzing problems, establishing needs and selecting from alternatives. This is a comprehensive handbook for decision making in course planning and instructional design.
series	other
last changed	2003/04/23 15:14

_id	1c3b
authors	Rubinger, Morton
year	1989
title	Will CAD Survive Designers?
doi	https://doi.org/10.52842/conf.acadia.1989.159
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 159-173
summary	Discussion about the future of CAD often focuses on hardware and software. But that is the wrong emphasis. Future directions for CAD should be considered from the point of view of what is of value to architectural design. This paper is mainly concerned with the needs of architectural design education. For CAD to develop effectively, design education must first address some existing problems which threaten the future of CAD. These problems result mainly from conflicts between traditional design values and needs of using computers. For computers to aid design, software designers need a clearer picture of what design is. But there is no single acceptable meaning of design. Instead several different yet coherent meanings with historical roots are suggested. Each of these directions have different implications for the development of CAD.
series	ACADIA
last changed	2022/06/07 07:56

_id	0278
authors	Saalman, Howard
year	1990
title	Goodness and Value in the Structure of Cognitive Processes
source	Journal of Architectural Education Summer, 1990. vol. 43: pp. 3-7. includes bibliography.
summary	This paper had its origins in a course entitled 'Basic Concepts in Architecture' which the author has been teaching for about ten years at Carnegie Mellon University. The course is designed to give architects a basis for understanding notions like process (including the architectural process), for developing functioning theories to determine the 'goodness' of things (including their own designs), in short, an approach to problems of cognition, of perception and of response to perceptions. They become aware, perhaps for the first time, of the precise significance of numbers in their design work, including the dreaded demons of 'nothing' and 'infinity.' They learn the meaning of time: it is the sum of perceptions involved in any process, including the process of getting to know things. Control over the design process is what architects must have so they can function effectively, and make the right decisions. Learning about these things is the goal of the course
keywords	design process, architecture, education, cognition, perception, performance, control
series	CADline
last changed	1999/02/12 15:09

For more results click below: