Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 251

Reformat results as: short short into frame detailed detailed into frame

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	abc9
authors	Campbell, A.T. and Fussell, D.S.
year	1990
title	Adaptive Mesh Generation for Global Diffuse Illumination
source	Computer Graphics Proc. SIGGRAPH 90 Vol. 24, No. 4, Aug. 1990, pp. 155-164
summary	Rapid developments in the design of algorithms for rendering globally illuminated scenes have taken place in the past five years. Net energy methods such as the hemicube and other radiosity algorithms have become very effective a t computing the energy balance for scenes containing diffusely reflecting objects. Such methods first break up a scene description into a relatively large number of elements, or possibly sev- eral levels of elements. Energy transfers among these ele- ments are then determined using a variety of means. While much progress has been made in the design of energy transfer algorithms, little or no attention has been paid to the proper generation of the mesh of surface elements. This pa- per presents a technique for adaptively creating a mesh of surface elements as the energy transfers are computed. The method allows large numbers of small elements to be placed at parts of the scene where the most active energy trans- fers occur without requiring that other parts of the scene be needlessly subdivided to the same degree. As a result, the computational effort in the energy transfer computations can be concentrated where it has the most effect. CR Categories and Subject Descriptors: 1.3.3 [Computer Graphics]: Picture/Image Generation-Display algorithms. 1.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism. General Terms: Algorithms Additional Key Words and Phrases: global illumination, radiosity, mesh-generation, diffuse, data structure, incremental.
series	journal paper
last changed	2003/04/23 15:50

_id	caadria2011_061
id	caadria2011_061
authors	Celani, Gabriela; José P. Duarte and Carlos V. Vaz
year	2011
title	The gardens revisited: The link between technology, meaning and logic?
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 643-652
doi	https://doi.org/10.52842/conf.caadria.2011.643
summary	The objective of this paper is to compare the computational concepts present in three books published by Mitchell between 1987 and 1990: The art of computer-graphics programming (1987), which has Robin Liggett and Thomas Kvan as co-authors, The logic of architecture (1990), probably his most influential work, and The poetics of gardens (1988), which has Charles Moore and William Turnbull as coauthors. By looking at the concepts that are presented in the three books and establishing a comparison between them, we expect to show that The poetics of Gardens should not be seen as a detour from Mitchell´s line of research, but rather as a key piece for understanding the relationship between technology, meaning and logic in his very coherent body of work.
keywords	Computational design concepts; technology; meaning; logic
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	298e
authors	Dave, Bharat and Woodbury, Robert
year	1990
title	Computer Modeling: A First Course in Design Computing
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 61-76
summary	Computation in design has long been a focus in our department. In recent years our faculty has paid particular attention to the use of computation in professional architectural education. The result is a shared vision of computers in the curriculum [Woodbury 1985] and a set of courses, some with considerable historyland others just now being initiated. We (Dave and Woodbury) have jointly developed and at various times over the last seven years have taught Computer Modeling, the most introductory of these courses. This is a required course for all the incoming freshmen students in the department. In this paper we describe Computer Modeling: its context, the issues and topics it addresses, the tasks it requires of students, and the questions and opportunities that it raises. Computer Modeling is a course about concepts, about ways of explicitly understanding design and its relation to computation. Procedural skills and algorithmic problem solving techniques are given only secondary emphasis. In essential terms, the course is about models, of design processes, of designed objects, of computation and of computational design. Its lessons are intended to communicate a structure of such models to students and through this structure to demonstrate a relationship between computation and design. It is hoped that this structure can be used as a framework, around which students can continue to develop an understanding of computers in design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	0f73
authors	Ervin, Stephen M.
year	1990
title	Designing with Diagrams: A Role for Computing in Design Education and Exploration
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 107-122
summary	Environmental designers, design educators and design students using computers are a constituency with a set of requirements for database structure and flexibility, for knowledge representation and inference mechanisms, and for both graphical and non-graphical operations, that are now articulatable and to-date largely unmet. This is especially so in the area called 'preliminary' or 'schematic' design, where our requirements are related to, but different from, those of our colleagues in mechanical and electrical engineering, whose needs have dominated the notable developments in this area. One manifestation of these needs is in the peculiar form of graphics called diagrams , and the ways in which environmental designers (architects, landscape architects., urban designers) use them. Our diagrams are both similar to and different from structural, circuit, or logical diagrams in important ways. These similarities and differences yield basic insights into designing and design knowledge, and provide guidance for some necessary steps in the development of the next generation of CAD systems. Diagrams as a form of knowledge representation have received little scrutiny in the literature of graphic representation and computer graphics. In the following sections I present an overview of the theoretical basis for distinguishing and using diagrams; examine some of the computational requirements for a system of computer-aided diagramming; describe a prototype implementation called CBD (Constraint Based Diagrammer) and illustrate one example of its use; and speculate on the implications and potential applications of these ideas in computer-aided design education.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	e892
authors	Kacmar, Charles John
year	1990
title	PROXHY: a Process -Oriented Extensible Hypertext Architecture
source	Texas A&M University
summary	This research describes a new architecture for hypertext environments. The architecture merges the process, object-oriented, and hypertext models to provide hypertext services to object-based, distributed, application components. Through this architecture, applications are integrated to form a comprehensive hypertext computing environment, allowing links to connect applications or objects in different applications. The architecture separates hypertext and application functionality so that multiple applications can use the facilities of a common hypertext layer. The design of the architecture is such that components can be extended or tailored in order to support future applications, multimedia objects, or the needs of specific applications or users. The process-based, object-oriented framework allows objects of arbitrary complexity to live and interact in a hypertext world. Additionally, the protocol and facilities which support component interaction provide location transparency, arbitrary object granularity, and parallel computation over a network. This dissertation provides a conceptual model of hypertext and a general architecture for hypertext system construction. Related literature from object-oriented programming, operating systems, multimedia applications, and database is discussed in terms of the architecture. A hypertext data model, computational model, and hypertext system taxonomy are used to discuss the capabilities of current hypertext systems. Interaction scenarios are provided in order to illustrate object interaction and the distribution of work among the components of the architecture. A prototype system, implemented to demonstrate the feasibility of the architecture, is discussed. The prototype illustrates all aspects of the architecture including distributed application and hypertext components, cross-application linking, and anchors acting as proxy objects for applications. Application scenarios, problems and limitations, and future research issues provide an understanding of the power of the architecture and its potential for impacting the design of next-generation hypertext systems.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	8833
authors	Kalay, Yehuda E., Swerdloff, Lucien M. and Majkowski, Bruce R. (et al)
year	1990
title	Process and Knowledge in Design Computation
source	Journal of Architectural Education. February, 1990. includes bibliography
summary	The challenge of understanding the many facets of design has been a central issue in attempting to computationally define design processes and knowledge. The historical progression of computers in design has been characterized by high aspirations repeatedly humbled by the complexity of design problems. Fundamental questions concerning the role and impact of computers in design should be re-examined in light of new developments in Computer-Aided Design (CAD) and Artificial Intelligence (AI), and the progressive understanding of design itself. At the heart of these issues must lie a mutual understanding of the respective traits of design and computation, and the balance of interaction between them. In this paper two avenues, expressed in terms of mappings between design and computation, are explored with the intention of clarifying the relationship between the theories of design and computation. First, the relationship between models of the design process and computational search strategies is explored. Several paradigms (problem solving, puzzle making, and constraint satisfying), which demonstrate a breadth of approaches to modeling design, are presented along with their computational implications. Second, relationships between design knowledge and computational representation schemes are discussed. Emphasis is placed on drawing from cognitive and computational knowledge representation schemes to represent design knowledge. Finally, some thoughts on integrating these design models and knowledge representation schemes into computer systems to assist designers are discussed
keywords	design process, knowledge, representation, architecture
series	CADline
email
last changed	2003/06/02 13:58

_id	7449
authors	Medero Rocha, Isabel A. and Danckwardt, Voltaire
year	2000
title	Projeto Missões, Computação Gráfica - Multimídia da Reconstituição Computadorizada da Redução de São Miguel Arcanjo no Rio Grande do Sul - Brasil ("Missões" Project, Computer Graphics and Multimedia of the "Redução de São Miguel Arcanjo" Digital Reconstruction (Rio Grande do Sul, Brazil))
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 191-193
summary	The Project Missions - Graphical Computation, recoups in a graphical and digital the pictures of the Church and the Reduction of São Miguel Arcanjo/RS/Brasil, allowing to the public a virtual stroll through the set at the time of its foundation in 1687. Initiate in 1990, the design refers the appropriation and implementation of the new computational technologies. The 3D model allows the dynamic visualization of the set, through aerial sights and walkthrough animations into the main streets and the inward of the central ship of the church. For the generation of the model, it was followed the principles of the architectural composition to decompose the parts, to be shaped, defining the architectural and composition elements. This COMPACT DISC, is one of the some midias of the Design Missions - Graphical Computation. In this proposal, the music was developed especially for the COMPACT DISC, looks for to reflect the poetical aspect of the interaction between light, shadow, of the inwards and exteriors, attenuating the technology of a virtual environment. In the integration between the art and the technology its recovered virtually, the poetical way, the memory of one of the icons of the identity of the Rio Grande do Sul, with the objective to keep alive, for the new generations, a patrimony that practically in ruins would have the souvenir of its lost real picture in the time.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cdd3
authors	Mitchell, William J.
year	1990
title	A New Agenda For Computer-Aided Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 1-16
summary	Design is the computation of shape information that is needed to guide fabrication or construction of an artifact. This information normally specifies artifact topology (connections of vertices, edges, surfaces, and closed volumes), dimensions, angles, and tolerances on dimensions and angles. There may also be associations of symbols with subshapes to specify material and other such properties. The process of design takes different forms in different contexts, but the most usual computational operations are transformations (unary operations) and combinations (binary operations) of shapes in a two-dimensional drawing or a three-dimensional geometric model. An initial vocabulary of shapes, together with a repertoire of shape transformation and combination operators., establishes the shape algebra within which the computation takes place. The computation terminates successfully when it can be shown that certain predicates are satisfied by a shape produced by recursively applying the transformation and combination operators to the initial vocabulary. These predicates are usually stated in symbolic (verbal or numerical) form. Thus determination of whether a predicate is satisfied usually involves producing a numerical or verbal interpretation of a drawing, then deriving inferences from this interpretation by applying rules or formulae.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	2ca1
authors	Montagu, A. and Bermudez, J.
year	1998
title	Datarq: The Development of a Website of Modern Contemporary Architecture
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998
doi	https://doi.org/10.52842/conf.ecaade.1998.x.p7a
summary	The pedagogic approach in the architectural field is suffering a deep change taking in consideration the impact that has been produced mainly by the CAD and multimedia procedures. An additional view to be taken in consideration is the challenge produced by the influence of advanced IT which since 1990-92, has affected positively the exchange of information among people of the academic environment. Several studies confirm this hypothesis, from the wide cultural spectrum when the digitalization process was emerging as an alternative way to data processing (Bateson 1976) to the pedagogical-computational side analyzed by (Papert 1996). One of the main characteristics indicated by S. Papert (op.cit) is the idea of "self teaching" which students are used everywhere due to the constant augment of "friendly" software and the decreasing costs of hardware. Another consequences to point out by S. Paper (op.cit) is that will be more probably that students at home will have more actualized equipment that most of the computer lab. of schools in general. Therefore, the main hypothesis of this paper is, "if we are able to combine usual tutorials design methods with the concept of "self-teaching" regarding the paradigmatic architectural models that are used in practically all the schools of architecture (Le Corbusier, F.L.Wright, M.v. der Rohe, M.Botta, T.Ando, etc.) using a Web site available to everybody, what we are doing is expanding the existing knowledge in the libraries and fulfill the future requirements of the newly generations of students".
series	eCAADe
email
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/35montagu/index.htm
last changed	2022/06/07 07:50

_id	e8fe
authors	Nagakura, Takehiko
year	1990
title	Shape Recognition and Transformation: A Script-Based Approach
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 149-170
summary	Design evolves. Architects deploy considerable knowledge to develop their designs from one stage to the next. Drawings play a major role in describing the 11 state" of design at each stage; however, they do not explicitly reveal the knowledge used to achieve the design, for the knowledge is concealed in the "process" between these stages rather than in the drawings themselves. This process involves parametric and schematic transformations as well as perception of unanticipated possibilities emerging from the drawings in progress. To make an impact on design, CAD must address these issues of design knowledge, but so far its focus has been instead on drawings as relatively static collections of graphic primitives. This paper introduces the concepts of shapes and shape transformation as fundamental aspects of design knowledge. It is implemented on a computer program in the form of a prototype shape-scripting language. In summary, this language works as a shell to encode a set of shape categories and their transformations, and it enables progressive shape recognition and shape transformation in line drawings. An appropriate set of these encoded transformations may represent a body of syntactic knowledge about an architectural style. This opens up the exciting possibility of a computational implementation of a shape grammar.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	2ea6
authors	Novak, Marcos
year	1989
title	An Experiment in Computational Composition
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 61-83
doi	https://doi.org/10.52842/conf.acadia.1989.061
summary	A compositional study based on a visual interpretation of information theory is introduced. An algorithm is presented that relates variety in spatial parameters to visual information, along with a genetically inspired mechanism for refining a design through cycles of incremental cumulative changes. Two- and three-dimensional examples are shown.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	0565
authors	Oxman, Robert and Oxman, Rivka
year	1990
title	The Computability of Architectural Knowledge
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 171-185
summary	In an important contribution to the theoretical foundation of design computing, Mitchell noted "an increasingly urgent need to establish a demonstrably sound, comprehensive, rigorously formalized theoretical foundation upon which to base practical software development efforts" (Mitchell, 1986). In this paper we propose such a theoretical framework. A basic assumption of this work is that the advancement of design computing is dependent upon the emergence of a rigorous formulation of knowledge in design. We present a model of knowledge in architectural design which suggests a promising conceptual basis for dealing with knowledge in computer-aided design systems. We require models which can represent the formal knowledge and manipulative operations of the designer in all of their complexity-that is formal models rather than just geometric models. Shape Grammars (Stiny,1980) represent an example of such models, and constitute a relatively high level of design knowledge as compared to, for example, use of symmetry operations to generate simple formal configurations. Building upon an understanding of the classes of design knowledge as the conceptual basis for formal modeling systems may contribute a new realization of the potential of the medium for design. This will require a comprehensive approach to the definition of architectural and design knowledge. We consider here the implications of a well-defined body of architectural and design knowledge for design education and the potential mutual interaction-in a knowledge-rich environment-of design learning and CAAD learning. The computational factors connected with the representation of design knowledge and its integration in design systems are among the key problems of CAAD. Mitchell's model of knowledge in design incorporates formal knowledge in a comprehensive, multi-level, hierarchical structure in which types of knowledge are correlated with computational concepts. In the main focus of this paper we present a structured, multi-level model of design knowledge which we discuss with respect to current architectural theoretical considerations. Finally, we analyze the computational and educational relevance of such models.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ga0222
id	ga0222
authors	Rocha, A. Medero and Danckwardt, Voltaire
year	2002
title	Projeto Missões, Computação Gráfica Multimídia da Reconstituição Computadorizada da Redução de São Miguel Arcanjo no Rio Grande do Sul - Brasil
source	International Conference on Generative Art
summary	The Design Missions - Graphical Computation, recoups in a graphical and digital the pictures of the Church and the Reduction of São Miguel Arcanjo, RS, Brasil, allowing to the public a virtual stroll through the set at the time of its foundation in 1687. Initiate in 1990, the design refers the appropriation and implementation of the new computational technologies. The 3D model allows the dynamic visualization of the set, through aerial sights and walkthrough animations into the main streets and the inward of the central ship of the church. For the generation of the model, it was followed the principles of the architectural composition to decompose the parts, to be shaped, defining the architectural and composition elements. This COMPACT DISC, is one of the some medias of the Design Missions - Graphical Computation. In this proposal, the music was developed especially for the COMPACT DISC, looks for to reflect the poetical aspect of the interaction between light, shadow, of the inwards and exteriors, attenuating the technology of a virtual environment. In the integration between the art and the technology its recovered virtually, the poetical way, the memory of one of the icons of the identity of the Rio Grande do Sul, with the objective to keep alive, for the new generations, a patrimony that practically in ruins would have the souvenir of its lost real picture in the time.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ecaade2021_065
id	ecaade2021_065
authors	Sdegno, Alberto and De Lorenzo, Andrea
year	2021
title	Geometric Parametrization of a New Town - The case study of Lignano Pineta by Marcello D'Olivo
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 537-544
doi	https://doi.org/10.52842/conf.ecaade.2021.1.537
summary	This research focuses on the geometric analysis of a project by the architect Marcello D'Olivo, in which the role of parametrization could be a significant part.The first phase was an in-depth study of the compositional syntax of the author, in order to understand the rules adopted by him to design architectures. As he worked between 1950 and 1990, he didn't use digital software for the computation of his projects, but only traditional instruments.The second phase was a description of digital computational procedures to generate models using parametric software. The digitization of some morphologies designed by D'Olivo was converted in shape algorithms.So the aim of the research was to convert his analog procedures into a series of well-defined digital steps, in order to systematize a way to proceed to control complex forms and to attempt to build a bridge between the pencil projects of D'Olivo and parametric design.
keywords	Geometric Parametrization; Shape grammar; Marcello D’Olivo
series	eCAADe
email
last changed	2022/06/07 07:56

_id	8a0c
authors	Tan, Milton
year	1990
title	Saying What It Is by What It Is Like - Describing Shapes Using Line Relationships
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 201-213
summary	Shapes - taken as well-defined collections of lines - are fundamental building blocks in architectural drawings. From doodles to shop drawings, shapes are used to denote ideas and represent elements of design, many of which ultimately translate into actual objects. But because designs evolve, the shapes representing a design are seldom static - instead, they are perpetually open to transformations. And since transformations involve relationships, conventional methods of describing shapes as sets of discrete endpoints may not provide an appropriate foundation for schematic design. This paper begins with a review of the perception of shapes and its significance in design. In particular, it argues that juxtapositions and inter-relationships of shapes are important seedbeds for creative development of designs. It is clear that conventional representation of shapes as sets of discrete lines does not cope with these -emergent" subshapes; the most basic of which arise out of intersecting and colinear lines. Attempts to redress this by using ‘reduction rules’ based on traditional point-and-line data structures are encumbered by computational problems of precision and shape specification. Basically, this means that some ‘close’ cases of sub-shapes may escape detection and their specifications are difficult to use in substitution operations. The paper presents the findings of a computer project - Emergence II - which explored a 'relational' description of shapes based on the concept of construction lines. It builds on the notion that architectural shapes are constructed in a graphic context and that, at a basic compositional level, the context can be set by construction lines. Accordingly, the interface enables the delineation of line segments with reference to pre-established construction lines. This results in a simple data structure where the knowledge of shapes is centralized in a lookup table of all its construction lines rather than dispersed in the specifications of line segments. Taking this approach, the prototype software shows the ease and efficiency of applying ‘reduction rules’ for intersection and colinear conditions, and for finding emergent sub-shapes by simply tracking the construction lines delimiting the ends of line segments.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	1e97
authors	Wojtowicz, Jerzy
year	1990
title	Aspects of design logic and Le Corbusier's universe of forms
source	Harvard University, Graduate School of Design
summary	Generation of form in architectural design tends to become a highly structured process when computational tools are engaged. The objective of this study was to develop an alternative way of designing with a computer--one that is not framed by assumptions of monotonicity and determinism. To realize this aim the case study method was chosen. It was followed by formalization and design etudes rooted in a specific corpus of significant design work. A corpus of work was isolated from Le Corbusier's Oeuvre complete to serve as the vehicle for: (a) Construction, using shape grammar rules of a dynamic model of a concise design world. (b) Analysis of the process of rupture and dialectic which results in the fundamental transformation of the design world. (c) Generation of existing and new examples in the given language. (d) Examination of the limitations of the shape grammar formalism and proposal of alternatives formalisms based on non-monotonic logic. Le Corbusier's purist tradition, selected as the corpus for this study, is characterized by formal continuity followed by a sudden rupture in its formal language. The issue of change and collapse of one design world into a new one was therefore the focus of the investigation. The method that was developed interprets the formal procedure of examining the architectural object as 'reading' and the procedure of generating the architectural object as 'writing'. Design is seen as a continuous feedback loop between reading and writing within the boundaries of a given universe of forms. This is demonstrated by abstracting an architectural vocabulary and compositional rules from Le Corbusier's purist work, translating the vocabulary into a set of computer models, and using the computer to transform and recompose these elements into new designs.
keywords	Data Processing; Composition; Proportion; Data Processing
series	thesis:PhD
email
last changed	2003/03/11 09:59

_id	8775
authors	Cigolle, Mark and Coleman, Kim
year	1990
title	Computer Integrated Design: Transformation as Process
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary	To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	acadia06_496
id	acadia06_496
authors	Jemtrud, Michael
year	2006
title	Eucalyptus: User Controlled Lightpath Enabled Participatory Design Studio
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 496-509
doi	https://doi.org/10.52842/conf.acadia.2006.496
summary	A new notion of participation is at stake with advances in technologically mediated work environments. The digitally mediated e-design studio has been around since the mid-1990’s and has been employed in various forms in disciplines including architecture/engineering/construction (AEC), industrial design, and the automotive industry. Insufficient bandwidth and insufficiently powerful, crudely coordinated tools resulted in distributed task-based modes of collaboration that did not allow full participation by members of the distributed design team. At the very least, the present “second generation” network severely limits the applications, tools, and modes of communication that can be used in data and visualization intense design scenarios. The emergence of Service Oriented Architectures and User-Controlled LightPaths (“intelligent infrastructure”) herald the beginning of a new age where fully participatory multi-site design may become possible. The networks, visualization & communication tools, Service Oriented Architecture & Web Services, work protocols, and physical site designs of the Participatory Design Studio (PDS) being developed by the authors will constitute one of the first working examples of this future. This paper will briefly outline the “mise en scène” or staging of the technical configuration of the Eucalyptus project; observations and results from the creative activity of the PDS in the context of two case studies; and speculate on the implications for design activity, pedagogy, and a more robust mode of participation.
series	ACADIA
email
last changed	2022/06/07 07:52

For more results click below: