Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 254

Reformat results as: short short into frame detailed detailed into frame

_id	4ac0
authors	Balachandran, M. B. and Gero, John S.
year	1990
title	Knowledge Engineering and Multicriteria Optimization
source	Berlin: Springer-Verlag, 1990. pp. 115-147. CADLINE has abstract only
summary	Many aspects of optimization, including problem formulation, algorithm selection and the interpretation of results require human judgment and experience, and are traditionally carried out by humans. Recently developed knowledge-based system methodologies now allow us to incorporate different forms of knowledge required to carry out such non-numeric tasks. The role and effectiveness of knowledge-based methodologies in multicriteria optimization are described and illustrated with examples
keywords	design, multicriteria, optimization, knowledge base
series	CADline
email
last changed	2003/06/02 13:58

_id	05d7
authors	Hubka, V. and Eder, W.E.
year	1990
title	Design Knowledge: Theory in Support of Practice
source	Journal of Engineering Design. 1990. vol.1: pp. 97-108 : ill. includes bibliography
summary	This paper discusses various aspects of the study of Specific Design Knowledge (SDK), which is includes knowledge of the specialist's domain or branch. The character, types, forms and ways of obtaining the available SDK are discussed
keywords	design, knowledge, expert systems, knowledge acquisition, engineering
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	e8fe
authors	Nagakura, Takehiko
year	1990
title	Shape Recognition and Transformation: A Script-Based Approach
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 149-170
summary	Design evolves. Architects deploy considerable knowledge to develop their designs from one stage to the next. Drawings play a major role in describing the 11 state" of design at each stage; however, they do not explicitly reveal the knowledge used to achieve the design, for the knowledge is concealed in the "process" between these stages rather than in the drawings themselves. This process involves parametric and schematic transformations as well as perception of unanticipated possibilities emerging from the drawings in progress. To make an impact on design, CAD must address these issues of design knowledge, but so far its focus has been instead on drawings as relatively static collections of graphic primitives. This paper introduces the concepts of shapes and shape transformation as fundamental aspects of design knowledge. It is implemented on a computer program in the form of a prototype shape-scripting language. In summary, this language works as a shell to encode a set of shape categories and their transformations, and it enables progressive shape recognition and shape transformation in line drawings. An appropriate set of these encoded transformations may represent a body of syntactic knowledge about an architectural style. This opens up the exciting possibility of a computational implementation of a shape grammar.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	2bb6
authors	Van Bakergem, Dave
year	1990
title	Image Collections in the Design Studio
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 261-271
summary	No matter what the medium, architects are constantly using images in all aspects of design thinking. Whether it is the perception of the environment, an image in the mind's eye, an abstract drawing or a photographic record, designers use images to conceive of, and manipulate their design ideas. Managing these image collections occurs at a variety of levels in the creative process and is dependent on the type of image that is called upon for reference. The most basic example would be the image collection residing in the mind's memory which is a result of the designer’s world experiences and the relative impressiveness of each experience. Clearly, personal memory plays a significant role in the use of imagery in design, but it is unreliable and can be abstracted in uncontrollable ways. The sketchbook and later photographic collections of the grand tour were the beginnings of efforts to manage and utilize image collections as an aid to drawing and thinking about design. Now the capacity to use electronic means of creating, altering, storing, and retrieving images will enable designers to effectively use large image collections in ways that have not been possible before. This paper describes current work at the School of Architecture at Washington University in a graduate design studio. The students use a powerful 3D modeling CAD system (HOKDraw) to design and present their studio projects. In addition, we are experimenting with an image storage and retrieval system which is directly linked to the CAD model through a relational database (INGRES). Access to the database and images is instantly available through the command language and graphic display. The CAD model in effect becomes a 3D menu to an extensive image database stored on an optical memory disc recorder. Several collections are available to the studio members: the library's slide collection which relates to the studio project, specific photographs and drawings of the project site, and personal image collections stored by individuals for their own reference. The commonly accessible images are basically background material and images collected by the students to document the site, urban context and building typology. The personal images collections are any images (drawings, photographs, published images, CAD images) created or collected by the students for purposes of informing their design thinking. This work relates to the use of precedents and typology in architecture as a point of departure as well as in development of design ideas.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	1e97
authors	Wojtowicz, Jerzy
year	1990
title	Aspects of design logic and Le Corbusier's universe of forms
source	Harvard University, Graduate School of Design
summary	Generation of form in architectural design tends to become a highly structured process when computational tools are engaged. The objective of this study was to develop an alternative way of designing with a computer--one that is not framed by assumptions of monotonicity and determinism. To realize this aim the case study method was chosen. It was followed by formalization and design etudes rooted in a specific corpus of significant design work. A corpus of work was isolated from Le Corbusier's Oeuvre complete to serve as the vehicle for: (a) Construction, using shape grammar rules of a dynamic model of a concise design world. (b) Analysis of the process of rupture and dialectic which results in the fundamental transformation of the design world. (c) Generation of existing and new examples in the given language. (d) Examination of the limitations of the shape grammar formalism and proposal of alternatives formalisms based on non-monotonic logic. Le Corbusier's purist tradition, selected as the corpus for this study, is characterized by formal continuity followed by a sudden rupture in its formal language. The issue of change and collapse of one design world into a new one was therefore the focus of the investigation. The method that was developed interprets the formal procedure of examining the architectural object as 'reading' and the procedure of generating the architectural object as 'writing'. Design is seen as a continuous feedback loop between reading and writing within the boundaries of a given universe of forms. This is demonstrated by abstracting an architectural vocabulary and compositional rules from Le Corbusier's purist work, translating the vocabulary into a set of computer models, and using the computer to transform and recompose these elements into new designs.
keywords	Data Processing; Composition; Proportion; Data Processing
series	thesis:PhD
email
last changed	2003/03/11 09:59

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4cf3
authors	Kalay, Yehuda E.
year	1989
title	Modeling Objects and Environments
source	xix, 402 p. : ill. New York: Wiley, 1989. includes a short bibliography and index. Part of the Principles of Computer Aided Design series. --- See also review by Patricia G
summary	McIntosh, in ACADIA Newsletter Vol. 9 No. 3 pp 20-23, June 1990. This book introduces the concept of modeling objects in the computer's memory so it can be used to aide the process of their design. Modeling is defined as an hierarchical abstraction of data and operators to manipulate it, subject to semantic integrity constraints that guarantee the realizability of the designed artifact in the real world. Starting with general concepts of modeling, the book moves on to discuss the modeling of shapes (form) in two and in three dimensions. The discussion covers both topology and geometry. Next the book introduces the concept of shape transformations (translation, scaling, rotation, etc.), both in absolute and in relative terms. The book then introduces the concept of assembly modeling, and adds non-graphical attributes to the representation. It concludes with a discussion on user interface and parametrization. The book includes many examples written in Pascal that complement the theory, and can be used as a basis for building a geometric modeling engine. It also includes exercises, so it can be used as a text book for a two-semester advance course in geometric modeling
keywords	CAD, data structures, solid modeling, abstraction, polygons, solids, boolean operations, transforms, computer graphics, user interface, parametrization, B-rep, polyhedra, objects, PASCAL
series	CADline
email
last changed	2003/06/02 13:58

_id	8927
authors	Brown, G.Z., McDonald, M. and Meacham, M.
year	1990
title	A Review of Computer Use in Industrialized Housing
source	October, 1990. 72 p. : ill. includes bibliography
summary	The U.S. housing industry is becoming increasingly industrialized. In the process, housing production is becoming more standardized and rationalized, which have the potential to make computerization of the production process easier. This report reviews, assess and documents the extent of computer use in marketing, design, engineering and manufacturing of industrialized housing. Compares and contrasts the state of the art in U.S. vs. Japan and Western Europe. It assess and documents the needs of the domestic industry in this field, and establishes design criteria for new computerized energy tools unique to industrialized housing
keywords	prefabrication, housing, CAD, practice, building, energy, management
series	CADline
last changed	2003/06/02 13:58

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	f9e5
authors	Cherneff, Jonathan Martin
year	1990
title	Knowledge Based Interpretation of Architectural Drawings
source	Massachusetts Institute of Technology, Department of Civil Engineering, Cambridge, MA
summary	Architectural schematic drawings have been used to communicate building designs for centuries. The symbolic language used in these drawings efficiently represents much of the intricacy of the building process (e.g. implied business relationships, common building practice, and properties of construction materials). The drawing language is an accepted standard representation for building design, something that modern data languages have failed to achieve. In fact, the lack of an accepted standard electronic representation has hampered efforts at computer intergration and perhaps worsened industry fragmentation. In general, drawings must be interpreted, by a professional, and then reentered in order to transfer them from one CAD system to another. This work develops a method for machine interpretation of architectural (or other) schematic drawings. The central problem is to build an efficient drawing parser (i.e. a program that identifies the semantic entitites, characteristics, and relationships that are represented in the drawing). The parser is built from specifications of the drawing grammar and an underlying spatial model. The grammar describes what to look for, and the spatial model enables the parser to find it quickly. Coupled with existing optical recognition technology, this technique enables the use of drawings directly as: (1) a database to drive various AEC applications, (2) a communication protocol to integrate CAD systems, (3) a traditional user interface.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	411f
authors	Coyne, Richard D. and Postmus, A.G.
year	1990
title	Spatial Applications of Neural Networks in Computer-Aided Design
source	Artificial Intelligence in Engineering. 1990. vol. 5: pp. 9-22. CADLINE has abstract only
summary	Neural networks of PDP (parallel distributed processing), models of computation are based on mathematical models of neural processes. The authors explore the application of PDP to simple spatial reasoning in computer-aided design. Knowledge that provides a mapping from performances to design descriptions can be encoded into PDP systems in the form of learned patterns. The implementation of a simple PDP pattern associator is described. The system is shown to facilitate a rudimentary kind of associative or analogical reasoning. It also facilitates reasoning where only incomplete information is available. There are important concerns in design reasoning
keywords	CAD, neural networks, design, representation, knowledge, reasoning
series	CADline
email
last changed	2003/05/17 10:13

_id	8b27
authors	Eastman, Charles M.
year	1990
title	Vector Versus Raster : A Functional Comparison of Drawing Technologies
source	IEEE Computer Graphics and Applications. September, 1990. vol. 10: pp. 68-80 : ill. includes bibliography
summary	Raster drawing systems have emerged as an alternative to more traditional vector-based CAD drafting systems. With engineering drawing in mind, the author compares the functional capabilities of these two technologies and explores means for integrating the best features of both. The characteristics examined are not those of any particular raster or vector implementation but are derived from the underlying technologies
keywords	CAD, drawings, systems, technology, scanning, computer graphics
series	CADline
email
last changed	2003/05/17 10:15

_id	0f73
authors	Ervin, Stephen M.
year	1990
title	Designing with Diagrams: A Role for Computing in Design Education and Exploration
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 107-122
summary	Environmental designers, design educators and design students using computers are a constituency with a set of requirements for database structure and flexibility, for knowledge representation and inference mechanisms, and for both graphical and non-graphical operations, that are now articulatable and to-date largely unmet. This is especially so in the area called 'preliminary' or 'schematic' design, where our requirements are related to, but different from, those of our colleagues in mechanical and electrical engineering, whose needs have dominated the notable developments in this area. One manifestation of these needs is in the peculiar form of graphics called diagrams , and the ways in which environmental designers (architects, landscape architects., urban designers) use them. Our diagrams are both similar to and different from structural, circuit, or logical diagrams in important ways. These similarities and differences yield basic insights into designing and design knowledge, and provide guidance for some necessary steps in the development of the next generation of CAD systems. Diagrams as a form of knowledge representation have received little scrutiny in the literature of graphic representation and computer graphics. In the following sections I present an overview of the theoretical basis for distinguishing and using diagrams; examine some of the computational requirements for a system of computer-aided diagramming; describe a prototype implementation called CBD (Constraint Based Diagrammer) and illustrate one example of its use; and speculate on the implications and potential applications of these ideas in computer-aided design education.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	eee2
authors	Gero, John S. and Rosenman, Michael A.
year	1989
title	A Conceptual Framework for Knowledge-Based Design Research at Sydney University's Design Computing Unit
source	Southampton/Berlin: CMP/Springer- verlag, 1989. pp. 363-382. Published also in Artificial Intelligence in Engineering 5(2):363-383, 1990
summary	This paper presents the conceptual framework behind the Design Computing Unit's knowledge-based design research. It commences with a brief overview before introducing the role of experience in design. The conceptual schema 'prototypes' is introduced and described within a framework of design as transforming required or expected functions to structure descriptions. Current projects related to this conceptual framework are briefly described
keywords	CAD, knowledge base, design, prototypes, representation
series	CADline
email
last changed	2003/06/02 13:58

_id	c0a3
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1989
title	Component Based Computer Aided Learning for Students of Architecture and Civil Engineering
doi	https://doi.org/10.52842/conf.acadia.1989.193
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 193-208
summary	The paper describes the methodology and the current efforts to develop an interdisciplinary computer aided learning system for architects and civil engineers. The system being developed incorporates a component oriented relational database with an existing interactive 3-dimensional modeling system developed in the School of Architecture and Planning at SUNY Buffalo. The software will be used in existing courses in architecture and civil engineering as a teaching aid to help students understand the complex 3-dimensional interrelationships of structural components. Initial implementation has focused on the modeling of the components and assemblies for a lowrise steel frame structure. Current implementation efforts are focusing on the capability to view connections in various ways including the ability to "explode" a connection to better understand the sequence of construction and load paths. Appropriate codes, limit states of failure and specific data will be linked to each specific component in an expert system shell so that the system can offer feedback about a student generated connection and perhaps offer other possible connections a library of standard connections. Future expansion of the system will include adding other "systems" of a building, such as mechanical, electrical, plumbing, enclosure etc., to help students visualize the integration of the various parts.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	04aa
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1990
title	Building Representation within a Component Based Paradigm
doi	https://doi.org/10.52842/conf.acadia.1990.117
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 117-127
summary	This paper questions the use of a 2-dimensional medium to convey 3-dimensional information about design intent and proposes a computer-aided paradigm that could radically alter the way in which buildings are designed and built. The paradigm is centered about the accurate and rational representation (Rush, 86) of each individual component that makes up a building in a single, shared, computer based model. The single model approach couples the accurate physical representation of components with the accurate representation of technical information and knowledge about the assemblies of building components. It is anticipated that implementation of this approach will result in fewer communication problems that currently plague the fragmented process of practicing in the professions of architecture and engineering. The paper introduces the basic concepts within the paradigm and focuses on the development of intuitive, reasoning about the component-based design suitable for incorporation in a computer-aided setting.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	acadia06_496
id	acadia06_496
authors	Jemtrud, Michael
year	2006
title	Eucalyptus: User Controlled Lightpath Enabled Participatory Design Studio
doi	https://doi.org/10.52842/conf.acadia.2006.496
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 496-509
summary	A new notion of participation is at stake with advances in technologically mediated work environments. The digitally mediated e-design studio has been around since the mid-1990’s and has been employed in various forms in disciplines including architecture/engineering/construction (AEC), industrial design, and the automotive industry. Insufficient bandwidth and insufficiently powerful, crudely coordinated tools resulted in distributed task-based modes of collaboration that did not allow full participation by members of the distributed design team. At the very least, the present “second generation” network severely limits the applications, tools, and modes of communication that can be used in data and visualization intense design scenarios. The emergence of Service Oriented Architectures and User-Controlled LightPaths (“intelligent infrastructure”) herald the beginning of a new age where fully participatory multi-site design may become possible. The networks, visualization & communication tools, Service Oriented Architecture & Web Services, work protocols, and physical site designs of the Participatory Design Studio (PDS) being developed by the authors will constitute one of the first working examples of this future. This paper will briefly outline the “mise en scène” or staging of the technical configuration of the Eucalyptus project; observations and results from the creative activity of the PDS in the context of two case studies; and speculate on the implications for design activity, pedagogy, and a more robust mode of participation.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	c749
id	c749
authors	Kan, JWT and Gero JS
year	2009
title	Using the FBS ontology to capture semantic design information in design protocol studies
source	in J McDonnell and P Lloyd (eds), About: Designing. Analysing Design Meetings, CRC Press, pp. 213-229.
summary	This chapter presents a method to capture semantic information from design protocols. We report on a preliminary study that analyses a design protocol by using the FBS ontology and derives processes within this ontological framework by employing linkography. The usefulness of this method is examined by applying it to the Engineering 1 protocol (E1) as a case study. The original 1990 FBS ontology captures 66% meaningful processes of all the derived processes, while the situated FBS ontology captures 92% meaningful processes of all the derived processes. Further coding analysis may improve this percentage. The session is characterized, according to the ontology, by the high percentage of behaviour reformulation, followed by structure reformulation, and analysis.
keywords	ontology, FBS, protocol analysis,
series	other
type	normal paper
email
last changed	2009/09/11 18:14

For more results click below: