Advanced search Recent papers Author index Keyword index Browse by series Help Desk About

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures
PDF papers
References

Hits 1 to 20 of 264

Reformat results as: short   short into frame   detailed   detailed into frame  

_id 91c4
authors Checkland, P.
year 1981
title Systems Thinking, Systems Practice
source John Wiley & Sons, Chichester
summary Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series other
last changed 2003/04/23 15:14
_id avocaad_2001_02
id avocaad_2001_02
authors Cheng-Yuan Lin, Yu-Tung Liu
year 2001
title A digital Procedure of Building Construction: A practical project
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series AVOCAAD
email
last changed 2005/09/09 10:48
_id eee2
authors Gero, John S. and Rosenman, Michael A.
year 1989
title A Conceptual Framework for Knowledge-Based Design Research at Sydney University's Design Computing Unit
source Southampton/Berlin: CMP/Springer- verlag, 1989. pp. 363-382. Published also in Artificial Intelligence in Engineering 5(2):363-383, 1990
summary This paper presents the conceptual framework behind the Design Computing Unit's knowledge-based design research. It commences with a brief overview before introducing the role of experience in design. The conceptual schema 'prototypes' is introduced and described within a framework of design as transforming required or expected functions to structure descriptions. Current projects related to this conceptual framework are briefly described
keywords CAD, knowledge base, design, prototypes, representation
series CADline
email
last changed 2003/06/02 13:58
_id 04aa
authors Harfmann, Anton C. and Chen, Stuart S.
year 1990
title Building Representation within a Component Based Paradigm
doi https://doi.org/10.52842/conf.acadia.1990.117
source From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 117-127
summary This paper questions the use of a 2-dimensional medium to convey 3-dimensional information about design intent and proposes a computer-aided paradigm that could radically alter the way in which buildings are designed and built. The paradigm is centered about the accurate and rational representation (Rush, 86) of each individual component that makes up a building in a single, shared, computer based model. The single model approach couples the accurate physical representation of components with the accurate representation of technical information and knowledge about the assemblies of building components. It is anticipated that implementation of this approach will result in fewer communication problems that currently plague the fragmented process of practicing in the professions of architecture and engineering. The paper introduces the basic concepts within the paradigm and focuses on the development of intuitive, reasoning about the component-based design suitable for incorporation in a computer-aided setting.
series ACADIA
email
last changed 2022/06/07 07:49
_id cf2011_p093
id cf2011_p093
authors Nguyen, Thi Lan Truc; Tan Beng Kiang
year 2011
title Understanding Shared Space for Informal Interaction among Geographically Distributed Teams
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 41-54.
summary In a design project, much creative work is done in teams, thus requires spaces for collaborative works such as conference rooms, project rooms and chill-out areas. These spaces are designed to provide an atmosphere conducive to discussion and communication ranging from formal meetings to informal communication. According to Kraut et al (E.Kraut et al., 1990), informal communication is an important factor for the success of collaboration and is defined as “conversations take place at the time, with the participants, and about the topics at hand. It often occurs spontaneously by chance and in face-to-face manner. As shown in many research, much of good and creative ideas originate from impromptu meeting rather than in a formal meeting (Grajewski, 1993, A.Isaacs et al., 1997). Therefore, the places for informal communication are taken into account in workplace design and scattered throughout the building in order to stimulate face-to-face interaction, especially serendipitous communication among different groups across disciplines such as engineering, technology, design and so forth. Nowadays, team members of a project are not confined to people working in one location but are spread widely with geographically distributed collaborations. Being separated by long physical distance, informal interaction by chance is impossible since people are not co-located. In order to maintain the benefit of informal interaction in collaborative works, research endeavor has developed a variety ways to shorten the physical distance and bring people together in one shared space. Technologies to support informal interaction at a distance include video-based technologies, virtual reality technologies, location-based technologies and ubiquitous technologies. These technologies facilitate people to stay aware of other’s availability in distributed environment and to socialize and interact in a multi-users virtual environment. Each type of applications supports informal interaction through the employed technology characteristics. One of the conditions for promoting frequent and impromptu face-to-face communication is being co-located in one space in which the spatial settings play as catalyst to increase the likelihood for frequent encounter. Therefore, this paper analyses the degree to which sense of shared space is supported by these technical approaches. This analysis helps to identify the trade-off features of each shared space technology and its current problems. A taxonomy of shared space is introduced based on three types of shared space technologies for supporting informal interaction. These types are named as shared physical environments, collaborative virtual environments and mixed reality environments and are ordered increasingly towards the reality of sense of shared space. Based on the problem learnt from other technical approaches and the nature of informal interaction, this paper proposes physical-virtual shared space for supporting intended and opportunistic informal interaction. The shared space will be created by augmenting a 3D collaborative virtual environment (CVE) with real world scene at the virtual world side; and blending the CVE scene to the physical settings at the real world side. Given this, the two spaces are merged into one global structure. With augmented view of the real world, geographically distributed co-workers who populate the 3D CVE are facilitated to encounter and interact with their real world counterparts in a meaningful and natural manner.
keywords shared space, collaborative virtual environment, informal interaction, intended interaction, opportunistic interaction
series CAAD Futures
email
last changed 2012/02/11 19:21
_id 22de
authors Oxman, Rivka E.
year 1990
title The Role of Knowledge-Based Systems in Design and Design Education
source Int. J. Appl. Enging, Ed England: Pergamon Press, 1990. vol. 6: pp. 255-264 : ill. includes bibliography.
summary This paper investigates the role of Artificial Intelligence and Knowledge Based Design in the emergence of a 'general design science' common to all engineering design. The advantages of the design shell's approach is demonstrated relative to the utilization of expert systems for design. The design shell is proposed as a medium to accommodate the characteristics of design knowledge. The significance of this concept is discussed with respect to formalization of knowledge, implementation, application and operation in knowledge based systems. GRPS - a generative prototype refinement design shell is defined and elaborated. A system applying this concept in a significant structure of generic knowledge in architectural design is demonstrated. It utilizes a method for representing structured knowledge by exploiting the characteristics of both rules and frames, and integrates them in a prototype based design system. Finally, the significance of such an approach in research and design teaching is discussed
keywords design, education, knowledge base, expert systems, frames, architecture
series CADline
email
last changed 2003/06/02 13:58
_id 7a4c
authors Turner, James A. and Hall, Theodore W.
year 1990
title An Application of Geometric Modeling and Ray Tracing to the Visual and Acoustical Analysis of a Municipal Open-Air Auditorium
source From Research to Practice edited by J. Peter Jordan, pp. 173-185, Association for Computer Aided Design in Architecture
summary The APRL of The University of Michigan was recently contracted to develop geometric models of a large open-air auditorium on the Detroit River to facilitate computer aided visual and acoustical analysis. This paper is a summary of the approaches taken to construct solid and surface models of the auditorium, and to develop general software for acoustical simulation. The project was a cooperative effort between: faculty and students of the APRL; Kent L. Hubbell Architects, a local architecture office; Robert Darvas Associates, a local structural engineering firm; and OC Birdair.
series other
email
last changed 2003/04/23 15:50
_id eb5f
authors Al-Sallal, Khaled A. and Degelman, Larry 0.
year 1994
title A Hypermedia Model for Supporting Energy Design in Buildings
doi https://doi.org/10.52842/conf.acadia.1994.039
source Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series ACADIA
email
last changed 2022/06/07 07:54
_id 235d
authors Catalano, Fernando
year 1990
title The Computerized Design Firm
source The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series CAAD Futures
last changed 1999/04/03 17:58
_id 242f
authors Goldman, Glenn and Zdepski, M. Stephen
year 1990
title Image Sampling
doi https://doi.org/10.52842/conf.acadia.1990.021
source From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 21-28
summary Analogous to music sampling, in which sounds from the environment are recorded, distorted and used in unique ways to create music, "image sampling" is the visual equivalent of a sound bite used to create new visual forms, textures, patterns and types of architecture. Through the use of image sam ling, a designer can accurately record and digitize images from the existing visual world: rom the physical (built or natural) context of the site, from history (a specific building " or a significant architectural monument) or from previous work produced by the designer. The digital scanning process makes design information equal and uniform, as it converts all images to dot patterns of varying color. As a result the image can be transformed through numeric operations (even when the algorithms are transparent to the end user). The recorded images can therefore be fragmented, combined, distorted, duplicated, tweened, or subjected to random automated operations. Because computer images are digital, they facilitate modification and transformation, unlike their analog counterparts. Merging video and image processing capabilities with three-dimensional modeling permits the designer to collage visual information into new and readily editable architectural proposals. Combining image samples into new architectural concepts expands the scope of potentials available to the architect and also raises fundamental questions about issues of originality, creativity, authenticity, and the nature of the design process itself. What is original work, created by the designer, and what is merely re-used? The discussion of new digital imaging eventually leads to questions about design theory and ethics, in addition to those associated with computer technology and architectural form. As one works in any new medium, including the digital environment, many questions are raised about its impacts on design. Much of what is presented in this paper are early speculations on the implications of the digital technology and its influence on architecture.
series ACADIA
email
last changed 2022/06/07 07:51
_id a23f
authors Jordan, J. Peter (Ed.)
year 1990
title From Research to Practice [Conference Proceedings]
doi https://doi.org/10.52842/conf.acadia.1990
source ACADIA Conference Proceedings / Big Sky (Montana - USA) 4-6 October 1990, 231 p.
summary For the tenth time in as many years, the Association for Computer-Aided Design in Architecture (ACADIA) has invited architectural educators and professionals to discuss their activities and interests related to computer-aided architectural design. This annual meeting has grown from a small group representing a handful of schools to a conference with international participation. For the fifth time, the papers presented at this annual conference have been collected and published in a bound volume as the conference proceedings. In organizing these meetings, ACADIA must be viewed has having firmly established itself as a valuable forum for those who are interested and active in this area. Moreover, the proceedings of these conferences have become an important record for documenting the progress of ideas and activities in this field. This organization and its annual conferences have been a critical influence on my own professional development. The first conference I attended, ACADIA '86, confirmed a nagging suspicion that courses in computer-aided design (CAD) offered at the university level should be more than vendor training. Papers and conversations at subsequent conferences have reinforced this conviction and strengthened my commitment to CAD education which does more than convey electronic drawing technology. At the same time, I have been frustrated at the apparent lack of communication between those involved in these activities in architectural education and the average professional practice. With some notable exceptions, architects are only beginning to make basic computer-aided drafting pay for itself. In many small offices, "The CAD Computer" remains more decoration and status symbol than useful tool. While it can be argued that the economics of computer-aided drafting have only recently become attractive, it must be admitted that many members of ACADIA are actively involved in the development and use of computer applications which are significantly more challenging. In the short run, most of these activities will go largely unnoticed by the community of practicing architects. This situation raises a number of questions on the value of the work produced by members of ACADIA. One can (and many do) challenge the worth of "design" research produced by academia to those in professional practice. However, it is a fundamental mistake to insist that such work be of immediate and direct relevance to the profession. In fact, some presentations at the ACADIA conferences have focused solely on the pedagogical environment (which may be of some intellectual interest) but do not even attempt to address professional design issues. Other work may serve as the basis for further activities which may result in useful applications at some future point in time. Such work is strategic in nature and should not be expected to bear fruit for many years. These are the *natural" products of a university environment and, indeed, may be what the university does best. Still, design professionals remain indifferent (if not somewhat hostile) to these endeavors. The central dilemma resides in the ongoing debate about the fundamental goals of professional education. A number of design professionals believe that architectural education should follow more of a “trade school” model where a professional degree program becomes solely a process of acquiring (and practicing) a set of skills which are directly and immediately useful upon graduation. Today these people stiR closely examine the drafting skill of any recent graduate, but they are also likely to demanding expertise on AutoCAD. It is my view that this position tends to deprecate the image of architects and depreciate the economic status of the profession. On the other hand, there is a similar minority in architectural academia who teach because they are unable or unwilling to deal with the very real complexities and challenges of professional practice. These instructors tend to focus on obscure theory and academic credentials while discounting the importance of professional development. For most who participate in this discussion, it is becoming increasingly clear that professional competency must be founded on an effective marriage of intellectual theory and practical expertise. This must lead to the conclusion that CAD research must recognize and give serious consideration to the professional agenda in a substantive manner without abandoning those activities which deal with strategic and pedagogical issues.
series ACADIA
email
more http://www.acadia.org
last changed 2022/06/07 07:49
_id e892
authors Kacmar, Charles John
year 1990
title PROXHY: a Process -Oriented Extensible Hypertext Architecture
source Texas A&M University
summary This research describes a new architecture for hypertext environments. The architecture merges the process, object-oriented, and hypertext models to provide hypertext services to object-based, distributed, application components. Through this architecture, applications are integrated to form a comprehensive hypertext computing environment, allowing links to connect applications or objects in different applications. The architecture separates hypertext and application functionality so that multiple applications can use the facilities of a common hypertext layer. The design of the architecture is such that components can be extended or tailored in order to support future applications, multimedia objects, or the needs of specific applications or users. The process-based, object-oriented framework allows objects of arbitrary complexity to live and interact in a hypertext world. Additionally, the protocol and facilities which support component interaction provide location transparency, arbitrary object granularity, and parallel computation over a network. This dissertation provides a conceptual model of hypertext and a general architecture for hypertext system construction. Related literature from object-oriented programming, operating systems, multimedia applications, and database is discussed in terms of the architecture. A hypertext data model, computational model, and hypertext system taxonomy are used to discuss the capabilities of current hypertext systems. Interaction scenarios are provided in order to illustrate object interaction and the distribution of work among the components of the architecture. A prototype system, implemented to demonstrate the feasibility of the architecture, is discussed. The prototype illustrates all aspects of the architecture including distributed application and hypertext components, cross-application linking, and anchors acting as proxy objects for applications. Application scenarios, problems and limitations, and future research issues provide an understanding of the power of the architecture and its potential for impacting the design of next-generation hypertext systems.  
series thesis:PhD
last changed 2003/02/12 22:37
_id f047
authors Milne, Murray and Labib, Tarek
year 1990
title Tools for Designing Climate Responsive Buildings
doi https://doi.org/10.52842/conf.acadia.1990.161
source From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 161-172
summary The term "Computer-Aided Design" for some people is reserved exclusively for drafting systems that provide a 2- or 3-dimensional graphic representation of a building. But many other issues bear on the final form of a building, issues that initially cannot be represented in a drawing of that building. These issues include thermal performance, lighting, economics, behavioral factors, acoustics, structural safety, etc. Architects in the future will have a whole kit of computer-aided design tools to help them address all of these non-graphic issues. A "design tool" might be defined as something that helps an architect make a better design decision. But the development of design tools also has a hidden agenda: they leave the architect with a richer understanding of the underlying issues involved. In other words, they also teach.
series ACADIA
last changed 2022/06/07 07:59
_id af76
authors Wong, Waycal C.H. and Will, Barry F.
year 1996
title An Analysis of Using a Digital 3D Sundial as a Design and Decision Support Tool
doi https://doi.org/10.52842/conf.caadria.1996.131
source CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 131-141
summary The rapid speed of computer development brings new technologies, and these advances require innovative investigations to apply them optimally in the field of architecture. Burkett (1984) demonstrated that computer graphics can ‘provide an excellent opportunity for exploring solar issues in building redesign’. With one of the latest computer technologies, the "hyper-model” environment, this research investigates how to environment can become an aid in the design and decision support area. The research first reviews the communication between the architect and the client as described by Salisbury (1990). The review indicates that an interactive 3D hypermedia paradigm, with quick response, fast data manipulation and 3D visualization, offers a better communication media between the architect and the client. This research applies the "hyper-model” environment to design and develop a new methodology in collecting, analyzing, and presenting solar data. It also endeavors to show the possibilities of using the environment in design process.
series CAADRIA
last changed 2022/06/07 07:57
_id 4ac0
authors Balachandran, M. B. and Gero, John S.
year 1990
title Knowledge Engineering and Multicriteria Optimization
source Berlin: Springer-Verlag, 1990. pp. 115-147. CADLINE has abstract only
summary Many aspects of optimization, including problem formulation, algorithm selection and the interpretation of results require human judgment and experience, and are traditionally carried out by humans. Recently developed knowledge-based system methodologies now allow us to incorporate different forms of knowledge required to carry out such non-numeric tasks. The role and effectiveness of knowledge-based methodologies in multicriteria optimization are described and illustrated with examples
keywords design, multicriteria, optimization, knowledge base
series CADline
email
last changed 2003/06/02 13:58
_id 8927
authors Brown, G.Z., McDonald, M. and Meacham, M.
year 1990
title A Review of Computer Use in Industrialized Housing
source October, 1990. 72 p. : ill. includes bibliography
summary The U.S. housing industry is becoming increasingly industrialized. In the process, housing production is becoming more standardized and rationalized, which have the potential to make computerization of the production process easier. This report reviews, assess and documents the extent of computer use in marketing, design, engineering and manufacturing of industrialized housing. Compares and contrasts the state of the art in U.S. vs. Japan and Western Europe. It assess and documents the needs of the domestic industry in this field, and establishes design criteria for new computerized energy tools unique to industrialized housing
keywords prefabrication, housing, CAD, practice, building, energy, management
series CADline
last changed 2003/06/02 13:58
_id f9e5
authors Cherneff, Jonathan Martin
year 1990
title Knowledge Based Interpretation of Architectural Drawings
source Massachusetts Institute of Technology, Department of Civil Engineering, Cambridge, MA
summary Architectural schematic drawings have been used to communicate building designs for centuries. The symbolic language used in these drawings efficiently represents much of the intricacy of the building process (e.g. implied business relationships, common building practice, and properties of construction materials). The drawing language is an accepted standard representation for building design, something that modern data languages have failed to achieve. In fact, the lack of an accepted standard electronic representation has hampered efforts at computer intergration and perhaps worsened industry fragmentation. In general, drawings must be interpreted, by a professional, and then reentered in order to transfer them from one CAD system to another. This work develops a method for machine interpretation of architectural (or other) schematic drawings. The central problem is to build an efficient drawing parser (i.e. a program that identifies the semantic entitites, characteristics, and relationships that are represented in the drawing). The parser is built from specifications of the drawing grammar and an underlying spatial model. The grammar describes what to look for, and the spatial model enables the parser to find it quickly. Coupled with existing optical recognition technology, this technique enables the use of drawings directly as: (1) a database to drive various AEC applications, (2) a communication protocol to integrate CAD systems, (3) a traditional user interface.
series thesis:PhD
last changed 2003/02/12 22:37
_id 411f
authors Coyne, Richard D. and Postmus, A.G.
year 1990
title Spatial Applications of Neural Networks in Computer-Aided Design
source Artificial Intelligence in Engineering. 1990. vol. 5: pp. 9-22. CADLINE has abstract only
summary Neural networks of PDP (parallel distributed processing), models of computation are based on mathematical models of neural processes. The authors explore the application of PDP to simple spatial reasoning in computer-aided design. Knowledge that provides a mapping from performances to design descriptions can be encoded into PDP systems in the form of learned patterns. The implementation of a simple PDP pattern associator is described. The system is shown to facilitate a rudimentary kind of associative or analogical reasoning. It also facilitates reasoning where only incomplete information is available. There are important concerns in design reasoning
keywords CAD, neural networks, design, representation, knowledge, reasoning
series CADline
email
last changed 2003/05/17 10:13
_id 0f73
authors Ervin, Stephen M.
year 1990
title Designing with Diagrams: A Role for Computing in Design Education and Exploration
source The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 107-122
summary Environmental designers, design educators and design students using computers are a constituency with a set of requirements for database structure and flexibility, for knowledge representation and inference mechanisms, and for both graphical and non-graphical operations, that are now articulatable and to-date largely unmet. This is especially so in the area called 'preliminary' or 'schematic' design, where our requirements are related to, but different from, those of our colleagues in mechanical and electrical engineering, whose needs have dominated the notable developments in this area. One manifestation of these needs is in the peculiar form of graphics called diagrams , and the ways in which environmental designers (architects, landscape architects., urban designers) use them. Our diagrams are both similar to and different from structural, circuit, or logical diagrams in important ways. These similarities and differences yield basic insights into designing and design knowledge, and provide guidance for some necessary steps in the development of the next generation of CAD systems. Diagrams as a form of knowledge representation have received little scrutiny in the literature of graphic representation and computer graphics. In the following sections I present an overview of the theoretical basis for distinguishing and using diagrams; examine some of the computational requirements for a system of computer-aided diagramming; describe a prototype implementation called CBD (Constraint Based Diagrammer) and illustrate one example of its use; and speculate on the implications and potential applications of these ideas in computer-aided design education.
series CAAD Futures
last changed 1999/04/03 17:58
_id e496
authors Gero, John S. and Maher, Mary Lou
year 1990
title Theoretical Requirements for Creative Design by Analogy
source Formal Methods in Engineering Design, Manufacturing and Assembly, International Workshop (1st. : 1990 : Fort Collins, Colorado). editor. P Fitzhorn. pp. 19-27. CADLINE has abstract only.
summary This paper adopts the conceptual schema 'prototypes' as its base for representing function-behavior-structure relationships. Within this representation design by a transformational analogy is presented as a selection process on either function or structure which then transforms the structure or function respectively
keywords prototypes, creativity, design process
series CADline
email
last changed 2003/06/02 13:58

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 13HOMELOGIN (you are user _anon_48247 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002