Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 251

Reformat results as: short short into frame detailed detailed into frame

_id	2a8b
authors	Purcell, Patrick and Applebaum Dan
year	1990
title	Light Table: An Interface To Visual Information Systems
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 229-238
summary	A primary aim of the Light Table project was to see if a combination of the optical laser disc, local area networks, and interactive videographic workstation technology could bring a major visual collection, (such as the Rotch Visual Collections of the Massachusetts Institute of Technology), to a campuswide population of undergraduate users. VIS (Visual Information System) is the name being given to the new genre of information technology. Much research and development effort is currently being applied to areas where the image has a special significance, for example in architecture and planning, in graphic and fine arts, in biology, in medicine, and in photography. One particular advance in the technology of VIS has been the facility to access visual information across a distributed computer system via LAN (Local Area Networks) and video delivery systems, (such as campus TV cable). This advance allows users to retrieve images from both local and remote sources, dispatching the image search through the LAN, and receiving the images back at their workstation via dedicated channels on the campus TV cable. Light Table is the title of a system that acts as a computer-based interactive videographic interface to a variety of visual information systems described in the body of this paper. It takes its name from the traditional, back- lit, translucent light table that lecturers use to assemble and view collections of slides for talks and seminars. The component of Light Table which is being reported in greatest detail here, a software outcome called Galatea, is a versatile and robust system capable of controlling video devices in a networked environment.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	3207
authors	Emmerik, Maarten J.G.M. van
year	1990
title	Interactive design of parameterized 3D models by direct manipulation
source	Delft University of Technology
summary	The practical applicability of a computer-aided design system is strongly influenced by both the user interface and the internal model representation. A well designed user interface facilitates the communication with the system by offering an intuitive environment for for specification and representation of model information. An internal model representation, capable of storing geometric, topological and hierarchical dependencies between components in a model, increases the efficiency of the system by facilitating modification and elaboration of the model during the different stages of the design process. The subject of this thesis is the integration of a high level parameterized model representation with direct manipulation interface techniques for the design of three-dimensional objects. A direct manipulation interface enables the user to specify a model by interaction on a graphical representation, as an alternative for an abstract and error-prone apha-numerical dialogue style. A high level model representation is obtained by using a procedural modeling language with general purpose control structures, including arithmetic and logical expressions, repetition, conditionals, functions and procedures, and dedicated data types such as coordinate systems, geometric primitives and geometric constraints. The language interpreter is interconnected with a graphical interface, an incremental constraint solver and a geometrical modeler, using visual programming techniques. The developed techniques are implemented in a modeling system called GeoNode. The system incorporates paradigms of object-oriented design, with respect to both the user interface and to the system implementation. The applicability of the presented techniques is illustrated by examples in application domains such as solid modeling, kinematic analysis, feature modeling and top-down design.
keywords	CAD/CAM
series	thesis:PhD
last changed	2003/02/12 22:37

_id	a7f0
authors	Van Emmerick, M.J.G.M.
year	1990
title	Interactive design of parameterized 3D models by direct manipulation
source	Delft University Press
summary	The practical applicability of a computer-aided design system is strongly influenced by both the user interface and the internal model representation. A well designed user interface facilitates the communication with the system by offering an intuitive environment for for specification and representation of model information. An internal model representation, capable of storing geometric, topological and hierarchical dependencies between components in a model, increases the efficiency of the system by facilitating modification and elaboration of the model during the different stages of the design process. The subject of this thesis is the integration of a high level parameterized model representation with direct manipulation interface techniques for the design of three-dimensional objects. A direct manipulation interface enables the user to specify a model by interaction on a graphical representation, as an alternative for an abstract and error-prone apha-numerical dialogue style. A high level model representation is obtained by using a procedural modeling language with general purpose control structures, including arithmetic and logical expressions, repetition, conditionals, functions and procedures, and dedicated data types such as coordinate systems, geometric primitives and geometric constraints. The language interpreter is interconnected with a graphical interface, an incremental constraint solver and a geometrical modeler, using visual programming techniques. The developed techniques are implemented in a modeling system called GeoNode. The system incorporates paradigms of object-oriented design, with respect to both the user interface and to the system implementation. The applicability of the presented techniques is illustrated by examples in application domains such as solid modeling, kinematic analysis, feature modeling and top-down design.
series	other
last changed	2003/04/23 15:14

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	4ec7
authors	Papper, Mike
year	1990
title	Using high-level constraints to aid space planning applications in computer-aided design
source	University of Toronto, Department of Computer Science
summary	This thesis describes a system that aids in solving space planning and layout design problems through an innovative use of constraints. Space planning problem solving is aided by constrained manipulation, a trial-and-error approach, and modelling the scaling properties of objects. Constraints are used to model various physical properties of solid objects (including gravity and friction) and to control the way in which objects scale. The system runs on a Silicon Graphics workstation supporting interactive, real-time, 3-dimensional graphics that aid in visualizing designs. The problems handled by our prototype are restricted to objects representable with rectangular solids oriented along the cartesian axes. This system was used by designers and novice computer users to solve a studio layout problem. Constraints were found to aid in the manipulation of objects by providing predictable behaviour for objects. The test results indicate that subjects learn the behaviour of objects easily and use this information in useful ways. In addition, there are indications that constraints can reduce users' cognitive loads at the user interface level. The coupling of constraints with the interactive, 3-dimensional aspect of the system encourages the use of the system at earlier stages of the design process than simple geometric drafting systems. (Abstract shortened by UMI.)
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	ddss9483
id	ddss9483
authors	Shyi, Gary C.-W. and Huang, Tina S.-T.
year	1994
title	Constructing Three-Dimensional Mental Models from Two-Dimensional Displays
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the present study we adopted the tasks and the experimental procedures used in a recent series of study by Cooper (1990, 1991) for the purpose of examining how we utilized two-dimensional information in a line-drawing of visual objects to construct the corresponding three-dimensional mental structure represented by the 2-D displays. We expected that the stimulus materials we used avoided some of the problems that Cooper's stimuli had, and with that we examined the effect of complexity on the process of constructing 3-D models from 2-D displays. Such a manipulation helps to elucidate the difficulties of solving problems that require spatial abilities. We also investigated whether or not providing information representing an object viewed from different standpoints would affect the construction of the object's 3-D model. Some researchers have argued that 3-D models, once constructed, should be viewer-independent or viewpoint-invariant, while others have suggested that 3-D models are affected by the viewpoint of observation. Data pertinent to this issue are presented and discussed.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9503
id	ddss9503
authors	Wineman, Jean and Serrato, Margaret
year	1994
title	Visual and Spatial Analysis in Office Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The demands for rapid response to complex problems, flexibility, and other characteristics of today's workplace, such as a highly trained work force, have led many organizations to move from strict hierarchical structures to a more flexible project team organization. The organizational structure is broader and flatter, with greater independence given to organizational units, in this case the project teams. To understand the relationship between project team communication patterns and the design and layout of team space, a study was conducted of an architectural office before and after a move to new space. The study involved three project teams. Information was collected on individual communication patterns; perceptions of the ease of communication; and the effectiveness of the design and layout of physical space to support these communications. In order to provide guidance for critical decision-making in design, these communication data were correlated with a series of measures for the specification of team space enclosure and layout. These group/team space measures were adaptations of existing measures of individual work space, and included an enclosure measure, based on an enclosure measure developed by Stokols (1990); a measure of visual field, based on the "isovist" fields of Benedikt (1979); and an "integration" measure, based on the work of Hillier and Hanson (1984). Results indicate both linear and non-linear relationships between interaction patterns and physical space measures. This work is the initial stage of a research program to define a set of specific physical measures to guide the design of supportive work space for project teams and work groups within various types of organizations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	0544
authors	Foley, et.al.
year	1990
title	Computer Graphics Principles and Practice
source	Addison-Wesley
summary	Computer Graphics: Principles and Practice is the most exhaustive overview of computer graphics techniques available. This textbook's 21 chapters cover graphics hardware, user interface software, rendering, and a host of other subjects. Assuming a solid background in computer science or a related field, Computer Graphicsgives example programs in C and provides exercises at the end of each chapter to test your knowledge of the material. The guide has over 100 beautiful, four-color photographs that illustrate important topics and algorithms, such as ray tracing and bump maps, and also inspire you to acquire the skills necessary to produce them. Encyclopedic in its coverage, the book has a good table of contents so that you can immediately turn to information on the z-Buffer algorithm or the chapter on animation.
series	other
last changed	2003/04/23 15:14

_id	d104
authors	Foley, J.D., Van Dam A., Feiner, S.K. and Hughes, J.F.
year	1990
title	Computer Graphics, principle and practice
source	Addison-Wesley, New York
summary	Computer Graphics: Principles and Practice is the most exhaustive overview of computer graphics techniques available. This textbook's 21 chapters cover graphics hardware, user interface software, rendering, and a host of other subjects. Assuming a solid background in computer science or a related field, Computer Graphicsgives example programs in C and provides exercises at the end of each chapter to test your knowledge of the material. The guide has over 100 beautiful, four-color photographs that illustrate important topics and algorithms, such as ray tracing and bump maps, and also inspire you to acquire the skills necessary to produce them. Encyclopedic in its coverage, the book has a good table of contents so that you can immediately turn to information on the z-Buffer algorithm or the chapter on animation.
series	other
last changed	2003/04/23 15:14

_id	8a0c
authors	Tan, Milton
year	1990
title	Saying What It Is by What It Is Like - Describing Shapes Using Line Relationships
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 201-213
summary	Shapes - taken as well-defined collections of lines - are fundamental building blocks in architectural drawings. From doodles to shop drawings, shapes are used to denote ideas and represent elements of design, many of which ultimately translate into actual objects. But because designs evolve, the shapes representing a design are seldom static - instead, they are perpetually open to transformations. And since transformations involve relationships, conventional methods of describing shapes as sets of discrete endpoints may not provide an appropriate foundation for schematic design. This paper begins with a review of the perception of shapes and its significance in design. In particular, it argues that juxtapositions and inter-relationships of shapes are important seedbeds for creative development of designs. It is clear that conventional representation of shapes as sets of discrete lines does not cope with these -emergent" subshapes; the most basic of which arise out of intersecting and colinear lines. Attempts to redress this by using ‘reduction rules’ based on traditional point-and-line data structures are encumbered by computational problems of precision and shape specification. Basically, this means that some ‘close’ cases of sub-shapes may escape detection and their specifications are difficult to use in substitution operations. The paper presents the findings of a computer project - Emergence II - which explored a 'relational' description of shapes based on the concept of construction lines. It builds on the notion that architectural shapes are constructed in a graphic context and that, at a basic compositional level, the context can be set by construction lines. Accordingly, the interface enables the delineation of line segments with reference to pre-established construction lines. This results in a simple data structure where the knowledge of shapes is centralized in a lookup table of all its construction lines rather than dispersed in the specifications of line segments. Taking this approach, the prototype software shows the ease and efficiency of applying ‘reduction rules’ for intersection and colinear conditions, and for finding emergent sub-shapes by simply tracking the construction lines delimiting the ends of line segments.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	f9e5
authors	Cherneff, Jonathan Martin
year	1990
title	Knowledge Based Interpretation of Architectural Drawings
source	Massachusetts Institute of Technology, Department of Civil Engineering, Cambridge, MA
summary	Architectural schematic drawings have been used to communicate building designs for centuries. The symbolic language used in these drawings efficiently represents much of the intricacy of the building process (e.g. implied business relationships, common building practice, and properties of construction materials). The drawing language is an accepted standard representation for building design, something that modern data languages have failed to achieve. In fact, the lack of an accepted standard electronic representation has hampered efforts at computer intergration and perhaps worsened industry fragmentation. In general, drawings must be interpreted, by a professional, and then reentered in order to transfer them from one CAD system to another. This work develops a method for machine interpretation of architectural (or other) schematic drawings. The central problem is to build an efficient drawing parser (i.e. a program that identifies the semantic entitites, characteristics, and relationships that are represented in the drawing). The parser is built from specifications of the drawing grammar and an underlying spatial model. The grammar describes what to look for, and the spatial model enables the parser to find it quickly. Coupled with existing optical recognition technology, this technique enables the use of drawings directly as: (1) a database to drive various AEC applications, (2) a communication protocol to integrate CAD systems, (3) a traditional user interface.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	e1c9
authors	Danahy, John and Wright, Robert
year	1989
title	Computing and Design in the Canadian Schools of Architecture and Landscape Architecture: A Proposed Research Agenda for Integrated CAD & GIS in the 1990's
doi	https://doi.org/10.52842/conf.acadia.1989.227
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 227-244
summary	Conventional computer systems currently used by architecture and landscape architecture are not addressing complex decision making, system interface, dynamic manipulation and real time visualization of data. This paper identifies a strategy by which Canadian Schools could form a supportive network, incorporate and expand their research development. Within this larger framework schools would have better tools, a larger research base and access to funding as a group. The following discussion is an idea of what we at the Canadian Schools need to do differently over the next five years in our research and teaching in order to make a unique contribution to our fields.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	4b48
authors	Dourish, P.
year	1999
title	Where the Footprints Lead: Tracking down other roles for social navigation
source	Social Navigation of Information Space, eds. A. Munro, K. H. and D Benyon. London: Springer-Verlag, pp 15-34
summary	Collaborative Filtering was proposed in the early 1990's as a means of managing access to large information spaces by capturing and exploiting aspects of the experiences of previous users of the same information. Social navigation is a more general form of this style of interaction, and with the widening scope of the Internet as an information provider, systems of this sort have rapidly moved from early research prototypes to deployed services in everyday use. On the other hand, to most of the HCI community, the term social navigation" is largely synonymous with "recommendation systems": systems that match your interests to those of others and, on that basis, provide recommendations about such things as music, books, articles and films that you might enjoy. The challenge for social navigation, as an area of research and development endeavour, is to move beyond this rather limited view of the role of social navigation; and to do this, we must try to take a broader view of both our remit and our opportunities. This chapter will revisit the original motivations, and chart something of the path that recent developments have taken. Based on reflections on the original concerns that motivated research into social navigation, it will explore some new avenues of research. In particular, it will focus on two. The first is social navigation within the framework of "awareness" provisions in collaborative systems generally; and the second is the relationship of social navigation systems to spatial models and the ideas of "space" and "place" in collaborative settings. By exploring these two ideas, two related goals can be achieved. The first is to draw attention to ways in which current research into social navigation can be made relevant to other areas of research endeavour; and the second is to re-motivate the idea of "social navigation" as a fundamental model for collaboration in information-seeking."
series	other
last changed	2003/04/23 15:50

_id	68c0
authors	Gero, John S. and Rosenman, Michael A.
year	1990
title	Design Decision Making Using Pareto-Optimal Dynamic Programming
source	Berlin: Springer- Verlag, 1990. pp. 376-396
summary	When designing using the systems approach, the given system is decomposed into a number of subsystems, and for each subsystem a set of feasible alternatives is selected by the designer. A building design example is presented in which it is demonstrated that sufficient relevant solutions are generated in one pass of the dynamic programming procedure to give a good approximation to the Pareto set, thus offering designers sufficient choice in making a final selection. The relevant information is displayed in an intelligent manner so that designers can either make a final decision or else perceive what extra information they require
keywords	optimization, decision making, design process, architecture, multicriteria, evaluation, decomposition, dynamic programming
series	CADline
email
last changed	2003/06/02 10:24

For more results click below: