CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 263

_id 6259
authors Kalay, Yehuda E. and Majkowski, Bruce R.
year 1990
title CAD Technology Transfer: A Case Study
doi https://doi.org/10.52842/conf.acadia.1990.133
source From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 133-143
summary Transferring innovative university-based research results to the industry or practice that will ultimately use them is an arduous, time-consuming effort. One way to effect this technology transfer is to develop a demonstrable prototype product and then find or form a corporation that can expand the prototype into a full product and market it to the profession. Another way, which can shorten the transfer process, is to "sell" the idea, rather than the product, to a corporation that has the vision, the resources and the technical competency to support its development, with the intent to eventually market it. In this paper, we describe a case study of this latter approach, based on our seven year experience of researching, developing and transferring innovative architectural CAD technology. We describe the birth, growth, and maturity of Worldview, a computer-aided design and modeling system for use by architects. The project was initiated in 1983, and went through five software versions, numerous grants and grant extensions, two granting corporations, and extensive field testing. The software has developed into a mature system, with sufficient functionality appropriate for commercial distribution. The paper describes not only the factual chronology of the project, but also highlights the advantages and drawbacks of market-oriented university research. We conclude with suggestions as to how the process may be improved, and how problems and obstacles can be minimized.
series ACADIA
email
last changed 2022/06/07 07:52

_id 5509
authors Koutamanis, Alexandros
year 1990
title Development of a computerized handbook of architectural plans
source Delft University of Technology
summary The dissertation investigates an approach to the development of visual / spatial computer representations for architectural purposes through the development of the computerized handbook of architectural plans (chap), a knowledge-based computer system capable of recognizing the metric properties of architectural plans. This investigation can be summarized as an introduction of computer vision to the computerization of architectural representations: chap represents an attempt to automate recognition of the most essential among conventional architectural drawings, floor plans. The system accepts as input digitized images of architectural plans and recognizes their spatial primitives (locations) and their spatial articulation on a variety of abstraction levels. The final output of chap is a description of the plan in terms of the grouping formations detected in its spatial articulation. The overall structure of the description is based on an analysis of its conformity to the formal rules of its “stylistic” context (which in the initial version of chap is classical architecture). Chapter 1 suggests that the poor performance of computerized architectural drawing and design systems is among others evidence of the necessity to computerize visual / spatial architectural representations. A recognition system such as chap offers comprehensive means for the investigation of a methodology for the development and use of such representations. Chapter 2 describes a fundamental task of chap: recognition of the position and shape of locations, the atomic parts of the description of an architectural plan in chap. This operation represents the final and most significant part of the first stage in processing an image input in machine environment. Chapter 3 moves to the next significant problem, recognition of the spatial arrangement of locations in an architectural plan, that is, recognition of grouping relationships that determine the subdivision of a plan into parts. In the absence of systematic and exhaustive typologic studies of classical architecture that would allow us to define a repertory of the location group types possible in classical architectural plans, Chapter 3 follows a bottom-up approach based on grouping relationships derived from elementary architectural knowledge and formalized with assistance from Gestalt theory and its antecedents. The grouping process described in Chapter 3 corresponds both in purpose and in structure to the derivation of a description of an image in computer vision [Marr 1982]. Chapter 4 investigates the well-formedness of the description of a classical architectural plan in an analytical manner: each relevant level (or sublevel) of the classical canon according to Tzonis & Lefaivre [1986] is transformed into a single group of criteria of well-formedness which is investigated independently. The hierarchical structure of the classical canon determines the coordination of these criteria into a sequence of cognitive filters which progressively analyses the correspondence of the descriptions derived as in Chapter 3 to the constraints of the canon. The methodology and techniques presented in the dissertation are primarily considered with respect to chap, a specific recognition system. The resulting specification of chap gives a measure of the use of such a system within the context of a computerized collection of architectural precedents and also presents several extensions to other areas of architecture. Although these extensions are not considered as verifiable claims, Chapter 5 describes some of their implications, including on the role of architectural drawing in computerized design systems, on architectural typologies, and on the nature and structure of generative systems in architecture.
series thesis:PhD
email
last changed 2003/02/12 22:37

_id avocaad_2001_02
id avocaad_2001_02
authors Cheng-Yuan Lin, Yu-Tung Liu
year 2001
title A digital Procedure of Building Construction: A practical project
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series AVOCAAD
email
last changed 2005/09/09 10:48

_id sigradi2006_e183a
id sigradi2006_e183a
authors Costa Couceiro, Mauro
year 2006
title La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords evolutionary computation; genetic architectures; artificial/natural intelligence
series SIGRADI
email
last changed 2016/03/10 09:49

_id ab3c
authors Kramer, G.
year 1996
title Mapping a Single Data Stream to Multiple Auditory Variables: A Subjective Approach to Creating a Compelling Design
source Proceedings of the Third International Conferenceon Auditory Display, Santa FO Institute
summary Representing a single data variable changing in time via sonification, or using that data to control a sound in some way appears to be a simple problem but actually involves a significant degree of subjectivity. This paper is a response to my own focus on specific sonification tasks (Kramer 1990, 1993) (Fitch & Kramer, 1994), on broad theoretical concerns in auditory display (Kramer 1994a, 1994b, 1995), and on the representation of high-dimensional data sets (Kramer 1991a & Kramer & Ellison, 1991b). The design focus of this paper is partly a response to the others who, like myself, have primarily employed single fundamental acoustic variables such as pitch or loudness to represent single data streams. These simple representations have framed three challenges: Behavioral and Cognitive Science-Can sonifications created with complex sounds changing simultaneously in several dimensions facilitate the formation of a stronger internal auditory image, or audiation, than would be produced by simpler sonifications? Human Factors and Applications-Would such a stronger internal image of the data prove to be more useful from the standpoint of conveying information? Technology and Design-How might these richer displays be constructed? This final question serves as a starting point for this paper. After years of cautious sonification research I wanted to explore the creation of more interesting and compelling representations.
series other
last changed 2003/04/23 15:50

_id aea2
authors Laurel, B. (ed.)
year 1990
title The Art of Human-Computer Interface Design
source New York: Addison-Wesley.
summary Human-computer interface design is a new discipline. So new in fact, that Alan Kay of Apple Computer quipped that people "are not sure whether they should order it by the yard or the ton"! Irrespective of the measure, interface design is gradually emerging as a much-needed and timely approach to reducing the awkwardness and inconveniences of human-computer interaction. "Increased cognitive load", "bewildered and tired users" - these are the byproducts of the "plethora of options and the interface conventions" faced by computer users. Originally, computers were "designed by engineers, for engineers". Little or no attention was, or needed to be, paid to the interface. However, the pervasive use of the personal computer and the increasing number and variety of applications and programs has given rise to a need to focus on the "cognitive locus of human-computer interaction" i.e. the interface. What is the interface? Laurel defines the interface as a "contact surface" that "reflects the physical properties of the interactors, the functions to be performed, and the balance of power and control." (p.xiii) Incorporated into her definition are the "cognitive and emotional aspects of the user's experience". In a very basic sense, the interface is "the place where contact between two entities occurs." (p.xii) Doorknobs, steering wheels, spacesuits-these are all interfaces. The greater the difference between the two entities, the greater the need for a well-designed interface. In this case, the two very different entities are computers and humans. Human-conputer interface design looks at how we can lessen the effects of these differences. This means, for Laurel, empowering users by providing them with ease of use. "How can we think about it so that the interfaces we design will empower users?" "What does the user want to do?" These are the questions Laurel believes must be asked by designers. These are the questions addressed directly and indirectly by the approximately 50 contributors to The Art of Human-Computer Interface Design. In spite of the large number of contributors to the book and the wide range of fields with which they are associated, there is a broad consensus on how interfaces can be designed for empowerment and ease of use. User testing, user contexts, user tasks, user needs, user control: these terms appear throughout the book and suggest ways in which design might focus less on the technology and more on the user. With this perspective in mind, contributor D. Norman argues that computer interfaces should be designed so that the user interacts more with the task and less with the machine. Such interfaces "blend with the task", and "make tools invisible" so that "the technology is subervient to that goal". Sellen and Nicol insist on the need for interfaces that are 'simple', 'self-explanatory', 'adaptive' and 'supportive'. Contributors Vertelney and Grudin are interested in interfaces that support the contexts in which many users work. They consider ways in which group-oriented tasks and collaborative efforts can be supported and aided by the particular design of the interface. Mountford equates ease of use with understating the interface: "The art and science of interface design depends largely on making the transaction with the computer as transparent as possible in order to minimize the burden on the user".(p.248) Mountford also believes in "making computers more powerful extensions of our natural capabilities and goals" by offering the user a "richer sensory environment". One way this can be achieved according to Saloman is through creative use of colour. Saloman notes that colour can not only impart information but that it can be a useful mnemonic device to create associations. A richer sensory environment can also be achieved through use of sound, natural speech recognition, graphics, gesture input devices, animation, video, optical media and through what Blake refers to as "hybrid systems". These systems include additional interface features to control components such as optical disks, videotape, speech digitizers and a range of devices that support "whole user tasks". Rich sensory environments are often characteristic of game interfaces which rely heavily on sound and graphics. Crawford believes we have a lot to learn from the design of games and that they incorporate "sound concepts of user interface design". He argues that "games operate in a more demanding user-interface universe than other applications" since they must be both "fun" and "functional".
series other
last changed 2003/04/23 15:14

_id cf2009_poster_25
id cf2009_poster_25
authors Nembrini, Julien; Guillaume Labelle, Nathaniel Zuelzke, Mark Meagher and Jeffrey Huang
year 2009
title Source Studio: Teaching Programming For Architectural Design
source T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary The architectural studio framework presented here is based on the use of programming as central form generation reflexive medium (Schon, 1983). Its aim is to teach architectural design while introducing a different approach toward computer tools by enabling students to fully explore variations in their designs through the use of coding for form definition. It proposes the students to reflect on their design process through its confrontation to algorithmic formalization (Mitchell 1990). This results in exercising the synthetic re-thinking of their initial sketch intents to comply with the difficult task of fitting the language syntax. With the proliferation and constant replacement of computer tools among the architectural practice, a shift appears in the attitude towards introducing students to different tools: studio teaching is branded by specific software platforms advocated by the teaching team. A lack of generalized view, independent of commercial CAD software, is problematic for the definition of new teaching tools suited for this constantly evolving situation (Terzidis, 2006).
keywords Programming, studio teaching, scripting, parametric design
series CAAD Futures
type poster
last changed 2009/07/08 22:12

_id 2005_115
id 2005_115
authors Oxman, Rivka and Rotenstreich, Ruth
year 2005
title Conceptual Content of Digital Design
doi https://doi.org/10.52842/conf.ecaade.2005.115
source Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 115-121
summary Concepts related to digital architecture have begun to occupy a central role in current architectural discourse. Design concepts that have been the conceptual content of this discourse are now becoming integrated into the general architectural discourse. The research reports on this process of the emergence, migration, and crystallization of a new conceptual structure over the past decade under the influence of digital design and its emerging conceptual structure. The research presented in this paper examines the emergence of new ideas in architectural thinking that are related to digital architecture since 1990 until today. In order to demonstrate this shift, we have selected a representative architectural building type that is strongly and directly influenced by the conceptual content of the cultural discourse in architecture. A museum type was selected to represent features of the expression that reflects the changes and evolution of conceptual structures that underlie digital design. The research methodology is based on a method known as “content analysis”. Content analysis in our research was de- fined as including textual material in books, book chapters, essays, articles, and historical documents. A new approach for Design Content Analysis was accomplished employing the ICF analytical framework. In order to conduct a content analysis the text was coded and was broken down into categories on a variety of theoretical design themes. Our findings demonstrate that certain expressions related to digital technology have moved up from a low level descriptive function to a significant conceptual role in formulating the design content of architectural design. In our paper we describe the research, methodology findings and contribution to the definition of the conceptual content of contemporary architectural discourse on digital architecture.
keywords Digital Design, Digital Architecture, Content Analysis, Conceptual Design
series eCAADe
email
last changed 2022/06/07 08:00

_id avocaad_2001_20
id avocaad_2001_20
authors Shen-Kai Tang
year 2001
title Toward a procedure of computer simulation in the restoration of historical architecture
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series AVOCAAD
email
last changed 2005/09/09 10:48

_id diss_anders
id diss_anders
authors Anders, P.
year 2003
title A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series thesis:PhD
email
last changed 2005/09/09 12:58

_id 48fc
authors Carrara, Gianfranco and Novembri, Gabriele
year 1990
title Knowledge Assistant in the Process of Architectural Design
source Building and Environment. 1990. 39 p. includes bibliography
summary The article illustrates a methodological approach for the realization of a knowledge-based assistant for building and architectural design. The system is based on the concepts of constraint propagation, and uses the formal method of frames. The aim of the system is to cooperate 'interactively' with the designer in the various phases of this work
keywords knowledge base, architecture, CAD, building, design, frames
series CADline
last changed 2003/06/02 13:58

_id 235d
authors Catalano, Fernando
year 1990
title The Computerized Design Firm
source The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series CAAD Futures
last changed 1999/04/03 17:58

_id 91c4
authors Checkland, P.
year 1981
title Systems Thinking, Systems Practice
source John Wiley & Sons, Chichester
summary Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series other
last changed 2003/04/23 15:14

_id 8775
authors Cigolle, Mark and Coleman, Kim
year 1990
title Computer Integrated Design: Transformation as Process
source The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 333-346
summary To bring together poetry, magic and science, to explore beyond preconceptions, to invent spaces and forms which re-form and inform man's experience, these are the possibilities of architecture. Computer integrated design offers a means for extending the search, one which integrates both conceptual and perceptual issues in the making of architecture. The computer may assist in generating constructs which would not have been created by conventional methods. The application of computer techniques to design has to date been focused primarily on production aspects, an area which is already highly organizable and communicable. In conceptual and perceptual aspects of design, computer techniques remain underdeveloped. Since the impetus for- the development of computer applications has come from the immediate economics of practice rather than a theoretically based strategy, computer-aided design is currently biased toward the replication of conventional techniques rather than the exploration of new potentials. Over the last two years we have been involved in experimentation with methodologies which engage the computer in formative explorations of the design idea. Work produced from investigations by 4th and 5th year undergraduate students in computer integrated design studios that we have been teaching at the University of Southern California demonstrates the potential for the use of the computer as a principal tool in the exploration of syntax and perception, space and program. The challenge is to approach the making of architecture as an innovative act, one which does not rely on preconceived notions of design.
series CAAD Futures
email
last changed 2003/05/16 20:58

_id 417a
authors Cipriani, R., Lagomarsino, A.D., Stagnaro, A., Valenti, E. and Sambolino, T.
year 1990
title Some Years' Experience Teaching CAAD
source The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 347-361
summary In the conventional way of teaching architecture, it is common to think of design as the final synthesis of an intellectual process (composizione in Italian) integrating different elements from different curriculum subjects: history, structural analysis., technology, regional and urban planning, and so on. These elements, being comprehensive of their specific domains, together build the project. This process is supported by a long traditional that cannot easily be modified; however, we must not consider it to be the only one. Architectural practice should be much more. The Scuole di Architettura has walked a long and difficult road in the last thirty years., with a significant widening of interest in social, political, and economic issues. There have been recurring attempts at epistemological reformulation in some areas. There has been an acknowledgment of a crisis in contemporary town planning and a dimming of several certitudes that had developed with the birth and growth of the modernist school. And there has been a weakening of the promises that had given life to the vigorous discussion about town and regional planning. All of this leads to a reconsideration of the meaning and the deeper assumptions that the project implies, a question mark at the center of the human sciences that architectural practice involves. The old tradition., which assigned composition a central role in the project, is no longer sufficient because it is related to a reductive reading of epistemology that views human sciences as defining segments of physical knowledge of the actual world. Contemporary reflection on the difference between understanding and unfolding, together with the attention given to interpreting a moment as compared to purely describing one, gives to the project the task of inquiry instead of solution.
series CAAD Futures
last changed 1999/04/03 17:58

_id ecaade2015_37
id ecaade2015_37
authors Forster, Julia; Fritz, Sara, Schleicher, Johannes and Rab, Nikolaus
year 2015
title Developer Tools for Smart Approaches to Responsible-Minded Planning Strategies
doi https://doi.org/10.52842/conf.ecaade.2015.1.545
source Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 545-551
summary The city of Vienna follows a long-term initiative to become a Smart City. Within 2050 it aims to reduce 80% of the CO2 emissions (in comparison to 1990) and looks forward to generate ways for a sustainable energy production. (Smart City Framework Strategy 2014) Reaching this targets requires a complex planning process which involves interdisciplinary stakeholders and decision makers. An interactive multi-dimensional environment, comprising spatial objects and data models, is a helpful tool during these planning processes. This paper proposes a suitable path for the development of a structural framework for such an environment. The benefits of such an environment are shown in detail, based on an application of the economic solar heat potential in Vienna.
wos WOS:000372317300059
series eCAADe
email
last changed 2022/06/07 07:51

_id f586
authors Gabriel, G. and Maher, M.L.
year 2000
title Analysis of design communication with and without computer mediation
source Proceedings of Co-designing 2000, pp. 329-337
summary With recent developments in CAD and communication technologies, the way we visualise and communicate design representations is changing. A matter of great interest to architects, practitioners and researchers alike, is how computer technology might affect the way they think and work. The concern is not about the notion of 'support' alone, but about ensuring that computers do not disrupt the design process and collaborative activity already going on (Bannon and Schmidt, 1991). Designing new collaborative tools will then have to be guided by a better understanding of how collaborative work is accomplished and by understanding what resources the collaborators use and what hindrances they encounter in their work (Finholt et al., 1990). Designing, as a more abstract notion, is different than having a business meeting using video conferencing. In design it is more important to 'see' what is being discussed rather than 'watch' the other person(s) involved in the discussion. In other words the data being conveyed might be of more importance than the method with which it is communicated (See Kvan, 1994). Similarly, we believe that by using text instead of audio as a medium for verbal communication, verbal representations can then be recorded alongside graphical representations for later retrieval and use. In this paper we present the results of a study on collaborative design in three different environments: face-to-face (FTF), computer-mediated using video conferencing (CMCD-a), and computer-mediated using "talk by typing" (CMCD-b). The underlying aim is to establish a clearer notion of the collaborative needs of architects using computer-mediation. In turn this has the potential in assisting developers when designing new collaborative tools and in assisting designers when selecting an environment for a collaborative session.
series other
last changed 2003/04/23 15:50

_id 04aa
authors Harfmann, Anton C. and Chen, Stuart S.
year 1990
title Building Representation within a Component Based Paradigm
doi https://doi.org/10.52842/conf.acadia.1990.117
source From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 117-127
summary This paper questions the use of a 2-dimensional medium to convey 3-dimensional information about design intent and proposes a computer-aided paradigm that could radically alter the way in which buildings are designed and built. The paradigm is centered about the accurate and rational representation (Rush, 86) of each individual component that makes up a building in a single, shared, computer based model. The single model approach couples the accurate physical representation of components with the accurate representation of technical information and knowledge about the assemblies of building components. It is anticipated that implementation of this approach will result in fewer communication problems that currently plague the fragmented process of practicing in the professions of architecture and engineering. The paper introduces the basic concepts within the paradigm and focuses on the development of intuitive, reasoning about the component-based design suitable for incorporation in a computer-aided setting.
series ACADIA
email
last changed 2022/06/07 07:49

_id a2b9
authors Helsel, S.K. and Roth, J.P.
year 1990
title Virtual Reality, theory, practice and promise
source Meckler, London
summary On the creation of highly interactive, computer-based multimedia environments in which the user becomes a participant with the computer in a "virtually real" world. Essentially, the volume is a republication of articles published in the summer 1990 issue of Multimedia review, plus an additional previously unpublished article on metaphysics, a directory of companies and individuals working with virtual reality concepts and technology, and a suggested readings list.
series other
last changed 2003/04/23 15:14

_id 8e10
authors Hosny, Samir S., Sanvido, Victor E. and Kalisperis, Loukas N.
year 1990
title A Framework for an Integrated Computer-Aided Architectural Design Decision Support System
source Pennsylvania State University, January, 1990. 33 p. : ill. includes bibliography
summary This paper presents the 'ICAAD.DSS' conceptual model, which provides a framework for an integrated computer-aided architectural design (CAAD) decision support system. The model is based on a unified approach to computing in architecture which in turn is based on a holistic view of the architectural design process. The proposed model shifts the focus from product to process, and views the design problem as a goal-oriented, problem solving activity that allows a design team to identify strategies and methodologies in the search for design solutions. This paper introduces a new environment for the use and integration of computers in the architectural design process
keywords CAD, integration, design methods, architecture, design process, decision making, problem solving
series CADline
last changed 2003/06/02 10:24

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 13HOMELOGIN (you are user _anon_485691 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002