Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 263

Reformat results as: short short into frame detailed detailed into frame

_id	8c2b
authors	Peleg, Uriel J. and Shaviv, Edna
year	1990
title	A Knowledge Based Computer- Aided Solar Design System
source	ASHRAE Transactions (American Society of Heating, Refrigerating and Air-Conditioning Engineers). Atlanta, GA: 1990. v.st.-96-2: [5] p. : ill. includes bibliography
summary	A knowledge based computer-aided architectural design system (KB-CAAD) for the schematic design and evaluation of passive solar buildings is presented. The presented tool is based on the integration of knowledge based and procedural simulation methods with any available CAAD system for building representation. The knowledge base contains the heuristic rules for the design of passive solar buildings. Whenever possible, the knowledge base guides the designer through the decision making process. However, if 'rules of thumb' are not acceptable for the particular design problem, the KB-CAAD tool guides the architect towards the optimal solution, by using a procedural simulation model. It is demonstrated, through a case study, that the proposed knowledge based design system not only leads to the design of better solar buildings, but that it takes less time and man-power to introduce the geometrical data that would be needed for a regular non-solar building representation
keywords	CAD, knowledge base, energy, design, systems, evaluation, analysis
series	CADline
email
last changed	2003/06/02 10:24

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	f9e5
authors	Cherneff, Jonathan Martin
year	1990
title	Knowledge Based Interpretation of Architectural Drawings
source	Massachusetts Institute of Technology, Department of Civil Engineering, Cambridge, MA
summary	Architectural schematic drawings have been used to communicate building designs for centuries. The symbolic language used in these drawings efficiently represents much of the intricacy of the building process (e.g. implied business relationships, common building practice, and properties of construction materials). The drawing language is an accepted standard representation for building design, something that modern data languages have failed to achieve. In fact, the lack of an accepted standard electronic representation has hampered efforts at computer intergration and perhaps worsened industry fragmentation. In general, drawings must be interpreted, by a professional, and then reentered in order to transfer them from one CAD system to another. This work develops a method for machine interpretation of architectural (or other) schematic drawings. The central problem is to build an efficient drawing parser (i.e. a program that identifies the semantic entitites, characteristics, and relationships that are represented in the drawing). The parser is built from specifications of the drawing grammar and an underlying spatial model. The grammar describes what to look for, and the spatial model enables the parser to find it quickly. Coupled with existing optical recognition technology, this technique enables the use of drawings directly as: (1) a database to drive various AEC applications, (2) a communication protocol to integrate CAD systems, (3) a traditional user interface.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	39e0
id	39e0
authors	Jablonski, Allen D.
year	1991
title	Integrated Component-based Computer Design Modeling System: The Implications of Control Parameters on the Design Process
source	New Jersey Institute of Technology, Newark, NJ Graduate Thesis - Master's Program College of Architecture
summary	The design process is dependent on a clear order of integrating and managing all of the control parameters that impact on a building's design. All component elements of a building must be defined by their: Physical and functional relations; Quantitative and calculable properties; Component and/or system functions. This requires a means of representation to depict a model of a building that can be viewed and interpreted by a variety of interested parties. These parties need different types of representation to address their individual control parameters, as each component instance has specific implications on all of the control parameters. Representations are prepared for periodic design review either manually through hand-drawn graphics and handcrafted models; or with the aid of computer aided design programs. Computer programs can profoundly increase the speed and accuracy of the process', as well as provide a level of integration, graphic representation and simulation, untenable through a manual process. By maintaining a single control model in an Integrated Component-based Computer Design Modeling System (ICCDMS), interested parties could access the design model at any point during the process. Each party could either: 1. Analyze individual components, or constraints of the model, for interferences against parameters within that party's control; or 2. Explore design alternatives to modify the model, and verify the integration of the components or functions, within the design model, as allowable in relation to other control parameters.
keywords	Architectural Design; Data Processing
series	thesis:MSc
type	extended abstract
email
more	http://www.library.njit.edu/etd/1990s/1990/njit-etd1990-005/njit-etd1990-005.html
last changed	2006/09/25 09:04

_id	4c3d
authors	Johnson, Robert
year	1990
title	The Economics of Building : A Practical Guide for the Design Professional
source	xvii, 209 p. : ill. New York: John Wiley & Sons, 1990. includes bibliography
summary	This book is both an introduction to economic principles and theories as they relate to building design decisions, and a practical reference guide on how to use economic principles when making decisions. It unites a variety of specialized topics relating to building economics, such as cost estimating, life-cycle costing, cost indexes, capital budgeting, decision analysis, and real estate feasibility analysis, developing them within the framework of an integrated approach to making building design and management decisions. This integrated approach is developed by adapting basic approaches of decision theory to economic evaluation. This book attempts to achieve a sensible balance between the need to simplify relatively complex economic and decision theory principles and practices without sacrificing the intellectual content of the material
keywords	economics, practice, education, construction, architecture, theory, building process, evaluation, prediction, management, decision making
series	CADline
last changed	1999/02/12 15:08

_id	caadria2022_344
id	caadria2022_344
authors	Krezlik, Adrian
year	2022
title	Considering Energy, Materials and Health Factors in Architectural Design, Two Renovation Strategies for the Portuguese Building Stock
doi	https://doi.org/10.52842/conf.caadria.2022.2.619
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 619-628
summary	According to the Intergovernmental Panel on Climate Change, the built environment has a significant share in global final energy use, greenhouse gases emission, land-system change, and biodiversity loss to list some indicators. In Europe, the biggest challenge is to regenerate existing building stock to create a positive impact on Nature. The Portuguese housing stock is old: 56% is more than 30 years old, and it has a low level of thermal comfort and energy efficiency. The first thermal regulations appeared in 1990 and therefore most of the houses need urgent renovation to meet EU decarbonization goals, and to improve energy efficiency, as well as well-being and comfort of residents. This paper presents a method that aims to verify existing solutions known from vernacular architecture as complementary to existing strategies. It employs digital simulation to verify whether they could be used for renovation, measuring their impact on human and planetary health. The paper shows that there is a wide spectrum of parameters that influence the renovation process and that it is possible to enhance building performance using vernacular knowledge.
keywords	Building Energy Modelling, Life Cycle Assessment, Occupant Health, Energy Renovation, Vernacular Mimicry, SDG 3, SDG 11, SDG 13
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	ed07
authors	Love, James
year	1990
title	A Case Study in Knowledge-Based System Development : Envelope Design for Reduction of Traffic Noise Transmission
source	February, 1990. 19 p. : some ill. and table. includes a bibliography
summary	Researchers have demonstrated the value of replication of research and explicit testing of concepts in artificial intelligence (Ritchie and Hanna 1989). In this study, a rule- based system was implemented as an exercise in the application of the theory and practice of knowledge-based systems development to architectural design analysis. The test domain was the selection of wall and window assemblies to provide adequate noise reduction given a set of traffic and building site conditions. This domain was chosen for two reasons: (1) considerable detailed heuristic information was available; and (2) it avoided large solutions spaces, 'errorful' and time-dependent data, and unreliable knowledge. Development of the system in conjunction with an extensive literature review revealed that publications on construction and performance of rule-based systems provided insufficient detail on key aspects of system architecture. Topics suffering from neglect or insufficiently rigorous treatment included algorithms used in automated inference, methods for selection of inference procedures, the integration of numerical and symbolic processing, the formulation of explanation mechanisms to deal with integrated numerical and symbolic processing, testing methods, and software standardization. Improving the quality and scope of knowledge in these areas is essential if expert systems are to be applied effectively in architectural design
keywords	CAD, expert systems, acoustics, applications, knowledge base, design, architecture, AI, analysis
series	CADline
last changed	1999/02/12 15:09

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	2005_115
id	2005_115
authors	Oxman, Rivka and Rotenstreich, Ruth
year	2005
title	Conceptual Content of Digital Design
doi	https://doi.org/10.52842/conf.ecaade.2005.115
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 115-121
summary	Concepts related to digital architecture have begun to occupy a central role in current architectural discourse. Design concepts that have been the conceptual content of this discourse are now becoming integrated into the general architectural discourse. The research reports on this process of the emergence, migration, and crystallization of a new conceptual structure over the past decade under the influence of digital design and its emerging conceptual structure. The research presented in this paper examines the emergence of new ideas in architectural thinking that are related to digital architecture since 1990 until today. In order to demonstrate this shift, we have selected a representative architectural building type that is strongly and directly influenced by the conceptual content of the cultural discourse in architecture. A museum type was selected to represent features of the expression that reflects the changes and evolution of conceptual structures that underlie digital design. The research methodology is based on a method known as “content analysis”. Content analysis in our research was de- fined as including textual material in books, book chapters, essays, articles, and historical documents. A new approach for Design Content Analysis was accomplished employing the ICF analytical framework. In order to conduct a content analysis the text was coded and was broken down into categories on a variety of theoretical design themes. Our findings demonstrate that certain expressions related to digital technology have moved up from a low level descriptive function to a significant conceptual role in formulating the design content of architectural design. In our paper we describe the research, methodology findings and contribution to the definition of the conceptual content of contemporary architectural discourse on digital architecture.
keywords	Digital Design, Digital Architecture, Content Analysis, Conceptual Design
series	eCAADe
email
last changed	2022/06/07 08:00

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	e17f
authors	Turner, J.A., Tsou, J.-Y. and Prayoonhong, C.
year	1990
title	Information Modeling Applied to Cost and Energy Analysis During the Early Stages of Building Design
source	International Conference Proceedings on Systems Research (5th. : 1990 ). [6] p. : ill. includes bibliography
summary	The evaluation of design solutions by computer can only be achieved if the information describing the building design is in a form accessible by the computer. This not only demands that the data is in a machine-readable form, but that the data is logically organized, classified, and grouped so that its 'knowledge' can be found, extracted, used and modified by the variety of external sources. The article presents applications of information modeling to the design of knowledge bases to support design cost control and energy analysis
keywords	knowledge base, systems, analysis, architecture, energy, information, modeling, cost, evaluation
series	CADline
last changed	2003/06/02 14:41

_id	c2ed
authors	De Vries, Mark and Wagter, Harry
year	1990
title	A CAAD Model for Use in Early Design Phases
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 215-228
summary	In this paper we present a model for handling design information in the early design phases. This model can be used for representing both vague and exact defined information. The first part describes the difficulties involved in using CAD in the architectural design process and the characteristics of that process. Then we give a description of the design information and its representation during the design process. Next an overview of the architectural design process describes how design information is added and manipulated during the design process in order to achieve an effective result. Finally, we include a brief description of a simple prototype program to illustrate how this theory acts in practice.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	0faa
authors	Duelund Mortensen, Peder
year	1991
title	THE FULL-SCALE MODEL WORKSHOP
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 10-11
summary	The workshop is an institution, available for use by the public and established at the Laboratory of Housing in the Art Academy's school of Architecture for a 3 year trial period beginning April 1985. This resumé contains brief descriptions of a variety of representative model projects and an overview of all projects carried out so far, including the pilot projects from 1983 and planned projects to and including January 1987. The Full Scale Model Workshop builds full size models of buildings, rooms and parts of buildings. The purpose of the Full Scale Model Workshop is to promote communication among building's users. The workshop is a tool in an attempt to build bridges between theory and practice in research, experimentation and communication of research results. New ideas and experiments of various sorts can be tried out cheaply, quickly and efficiently through the building of full scale models. Changes can be done on the spot as a planned part of the project and on the basis of ideas and experiments achieved through the model work itself. Buildings and their space can thus be communicated directly to all involved persons, regardless of technical background or training in evaluation of building projects.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:23

_id	eee2
authors	Gero, John S. and Rosenman, Michael A.
year	1989
title	A Conceptual Framework for Knowledge-Based Design Research at Sydney University's Design Computing Unit
source	Southampton/Berlin: CMP/Springer- verlag, 1989. pp. 363-382. Published also in Artificial Intelligence in Engineering 5(2):363-383, 1990
summary	This paper presents the conceptual framework behind the Design Computing Unit's knowledge-based design research. It commences with a brief overview before introducing the role of experience in design. The conceptual schema 'prototypes' is introduced and described within a framework of design as transforming required or expected functions to structure descriptions. Current projects related to this conceptual framework are briefly described
keywords	CAD, knowledge base, design, prototypes, representation
series	CADline
email
last changed	2003/06/02 13:58

_id	c5bb
authors	Hirschberg, U., Meister, M. and Neumann, F.
year	1993
title	Processing of Geographic Data for CAAD-supported Analysis and Design of Urban Development Areas
doi	https://doi.org/10.52842/conf.ecaade.1993.x.w2h
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The interdisciplinary research project aims at the development of a hard- and software environment to support the representation, analysis, manipulation and design of urban development areas for architects and city planners. It was started in 1990 and involves three groups at the ETH Zurich: Architecture/Urban design - Processing of Geographic Data/Photogrammetry -Computer Sciences/CAAD. The first part of this paper will give an introduction to the goals and implications of the project by comparing it with a similar project one of the authors took part in as a student. Then the paper gives a brief description of the work of the three groups involved, an overview of the methods they employed and the results that were achieved. The main focus will be on the work of the CAAD group . Finally some conclusions are drawn and problems are discussed. The future work includes the testing of the tool by students during the winter term 1993/94.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	e714
authors	Lawrence, Roderick J.
year	1991
title	SIMULATIONS OF ARCHITECTURAL PROJECTS: METHODS AND APPLICATIONS AT FULL-SCALE
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 53-64
summary	This paper briefly examines five interrelated themes concerning the use of full-scale simulation models in architectural projects, in the context of research and professional practice. First, the meaning of design is discussed. Second, a multi-functional interpretation of building performance is presented. Third, the main reasons for simulating design projects, in general, and for using full-scale models, in particular, are summarized. Then the antecedent or prerequisite conditions for public participation to occur effectively are discussed. Finally, an overview of the use of full-scale simulation models in European workshops enables us to table four ma n classes of functions for full-scale models.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	4d0d
authors	Angelil, Mark
year	1990
title	Experiments as Modus Operandi
source	Journal of Architectural Education. November, 1990. Vol. 44: pp. 37-48 : 9 p. of ill
summary	Architecture has for too long focused on the presentation of pristine objects and the presentation in drawing form. A critical understanding of the field, however, necessitates a reevaluation of the roles of the process involved in the production of building. Rather than emphasizing surface appearances, an architecture rooted in process aims ultimately at revealing the fundamental and deep structures inherent within the making of architecture. One of the primary tasks of the process is to provoke intuition and ingenuity - and the awareness that both are founded on knowledge - and that knowledge must be applied with imagination. The experiment presented here developed sequentially with a defined structure to the process of design, moving gradually from the abstract into the concrete, thereby attempting and understanding of what Roland Barthes identified as 'concrete abstraction.'
keywords	design process, architecture, knowledge, experimentation
series	CADline
last changed	1999/02/12 15:07

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	067e
authors	Banz, George
year	1990
title	Expert Systems and Artificial Intelligence in Real Estate Development Planning
source	CIB W55/W66 Joint Symposium. 1990. 7 p. : ill. includes bibliography. -- Abstracts in English and French
summary	Expert systems and artificial intelligence can contribute substantially to the quality of real-estate development analysis. 'A. I. coaches' help correlate input and check the validity of schedules. Expert systems enhance life cycle cost analysis. Property value indicators become viable when used in conjunction with remote sensing and life style mapping
keywords	economics, life cycle, expert systems, analysis
series	CADline
last changed	1999/02/12 15:07

For more results click below: