Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 261

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	caadria2006_047
id	caadria2006_047
authors	SHAI YESHAYAHU, A.; B. MARIA VERA
year	2006
title	CUT, COPY, PASTE SOCIETY
doi	https://doi.org/10.52842/conf.caadria.2006.x.g1r
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 47-52
summary	You and I were not born in the 1990’s thus our experience about the true modalities of circulation and communication that have substantially transformed the methods that form and inform us today, are not really “pure”. Why? Because we know how slow time was before the communication boom of this last decade and because some of us still believe that we must read to be inform and thus, visit a bookstore, library or friends house and get peeks inside a subject of matter. So experiencing life as we bypass the book _ that’s a story of a brand new era! Taking note of the enormous changes this era brings, is fundamental to our current pedagogic undertakings. We seek data about the differences that lie in the way individuals, which never knew a world before or between analogue and digital zones, process information. It signals a dramatic shift in cognitive realms that is deeply imbedded in our emerging socio-economic spheres. So, you say “hypothesizing that economic, technologic, and cultural fluxes fabricate new means to learn and think, is not a fresh idea”_ True. But, it led us to ask one fundamental question _What are the upcoming learning habits employed by the “post digital” society? We noted that the post digital generation is an avid cut, copy, paste society that is able to extract information from infinite resources and mix, remix in diversified modes, through time and in real-time. We think these abilities are strengths, which will permit students to multitask yet they strongly differ from the academic agendas that are concerned with meditative processes and qualitative interdisciplinary task. As aspiring academics interested in the reconfiguration of current pedagogic formats we seek a creative intervention for future design generations, one that can benefit both the upheavals of the cultural world and the integrity of the academic setting where a pedagogy that links extended fields of knowledge with shifting cognitive habits can emerge. In this arena where cognition plays an important role, our goals are challenging and difficult, especially in the beginning years when the foundations set forward leaves lasting impressions. Thus, letting go of familiar grounds and tuning to continual alterations of the immediate surroundings enables us to seek means that facilitate important readings for our current learning/teaching processes. Demystifying changes and embracing differences as design potentials for new interventions are basic programmatic elements that permit us to incorporate a rigorous research agenda in the design exercises. Our presentation will project the current state of our teaching modality and provide examples of current studio work. It will demonstrate how everyday rituals, journeys and research observations, are documented by a society that heralds a new academic setting.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0faa
authors	Duelund Mortensen, Peder
year	1991
title	THE FULL-SCALE MODEL WORKSHOP
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 10-11
summary	The workshop is an institution, available for use by the public and established at the Laboratory of Housing in the Art Academy's school of Architecture for a 3 year trial period beginning April 1985. This resumé contains brief descriptions of a variety of representative model projects and an overview of all projects carried out so far, including the pilot projects from 1983 and planned projects to and including January 1987. The Full Scale Model Workshop builds full size models of buildings, rooms and parts of buildings. The purpose of the Full Scale Model Workshop is to promote communication among building's users. The workshop is a tool in an attempt to build bridges between theory and practice in research, experimentation and communication of research results. New ideas and experiments of various sorts can be tried out cheaply, quickly and efficiently through the building of full scale models. Changes can be done on the spot as a planned part of the project and on the basis of ideas and experiments achieved through the model work itself. Buildings and their space can thus be communicated directly to all involved persons, regardless of technical background or training in evaluation of building projects.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:23

_id	0642
authors	Eastman, Charles M.
year	1989
title	Why Are We Here and Where We are Going: The Evolution of CAD
doi	https://doi.org/10.52842/conf.acadia.1989.009
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 9-26
summary	This paper reviews architectural CAD in terms of its current use, development and status within the U.S. The characteristics of a new generation of architectural CAD system, called building modeling, are outlined. Criteria are developed for the evaluation of CAD systems that support building modeling. Some of the opportunities for universities growing out of building modeling are reviewed, including pedagogical implications and opportunities for research.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	01ba
authors	Hyde, Richard and Boon Lay, Ong
year	1990
title	Design Problems and Evaluative Strategies Using CAAD
source	February, 1990. 16 p. : col. ill. includes bibliography
summary	The way architects design comes into sharp focus when developing strategies for evaluating buildings. Architectural design is a highly subjective activity on the one hand but on the other it is also highly objective. The paper examines the use of CAAD systems for objective evaluation while also recognizing that this kind of evaluation has to be related to the subjective aspects of the design. In order to examine this, further research has been carried out into the use of CAAD systems to evaluate sunshading characteristics in a building design problem. The approach utilized the Integraph AMOD software to generate three dimensional models of the design proposal which were then tested using the Integraph Model View software which has a sunshading facility. The utility of this approach was tested first against criteria of how accurate the computer was in giving meaningful feedback to the designer. Secondly, how productive this approach was in the design process as compared to traditional techniques using instruments such as the heliodon. Finally, a discussion of the developments of the approach is given
keywords	design, CAD, evaluation, computer graphics, applications
series	CADline
last changed	2003/06/02 10:24

_id	6ab7
authors	Korson, Tim and McGregor, John D.
year	1990
title	Understanding Object- Oriented : A Unifying Paradigm
source	Communications of the ACM September, 1990. vol. 33: pp. 40-60. includes bibliography.
summary	The purpose of this paper is to introduce terminology, concepts and basic techniques surrounding the object-oriented paradigm. software / OOPS / programming. 63. Koskela, Lauri, Raija Hynynen and Martti Kallavuo, et al. 'Expert Systems in Construction - Initial Experiences.' CAD and Robotics in Architecture and Construction, Proceedings of the International Joint Conference = CAO et Robotique en Architecture et B.T.P. Actes des Journees Internationales. June, 1986. Paris: Hermes, pp. 167-176. includes bibliography and abstracts in French and English. This paper describes development of expert systems for construction applications in the Laboratory of Building Economics of the Technical Research Centre of Finland. Five small expert systems are described. Experiences gained in the development work are evaluated. The future significance of expert systems for the construction industry is discussed, and an approach towards expert systems to be adopted by organizations in the construction industry is suggested
keywords	construction, applications, economics, expert systems, knowledge, evaluation, analysis
series	CADline
last changed	2003/06/02 10:24

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	e17f
authors	Turner, J.A., Tsou, J.-Y. and Prayoonhong, C.
year	1990
title	Information Modeling Applied to Cost and Energy Analysis During the Early Stages of Building Design
source	International Conference Proceedings on Systems Research (5th. : 1990 ). [6] p. : ill. includes bibliography
summary	The evaluation of design solutions by computer can only be achieved if the information describing the building design is in a form accessible by the computer. This not only demands that the data is in a machine-readable form, but that the data is logically organized, classified, and grouped so that its 'knowledge' can be found, extracted, used and modified by the variety of external sources. The article presents applications of information modeling to the design of knowledge bases to support design cost control and energy analysis
keywords	knowledge base, systems, analysis, architecture, energy, information, modeling, cost, evaluation
series	CADline
last changed	2003/06/02 14:41

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	caadria2006_597
id	caadria2006_597
authors	CHOR-KHENG LIM, CHING-SHUN TANG, WEI-YEN HSAO, JUNE-HAO HOU, YU-TUNG LIU
year	2006
title	NEW MEDIA IN DIGITAL DESIGN PROCESS: Towards a standardize procedure of CAD/CAM fabrication
doi	https://doi.org/10.52842/conf.caadria.2006.x.r4i
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 597-599
summary	In 1990, due to the traditional architecture design and construction method difficult to build the complicated and non-geometry free-form Fish Structure in Barcelona, architect Frank Gehry started learn from the field of aerospace to utilize CAD/CAM technology in design and manufacture process. He created the free-form fish model in CAD system and exported the digital CAD model data to CAM machine (RP and CNC) to fabricate the design components, and finally assembled on the site. Gehry pioneered in the new digital design process in using CAD/CAM technology or so-called digital fabrication. It becomes an important issue recently as the CAD/CAM technology progressively act as the new digital design media in architectural design and construction process (Ryder et al., 2002; Kolarevic, 2003). Furthermore, in the field of architecture professional, some commercial computer systems had been developed on purpose of standardizes the digital design process in using CAD/CAM fabrication such as Gehry Technologies formed by Gehry Partners; SmartGeometry Group in Europe and Objectile proposed by Bernard Cache. Researchers in the research field like Mark Burry, Larry Sass, Branko Kolarevic, Schodek and others are enthusiastic about the exploration of the role of CAD/CAM fabrication as new design media in design process (Burry, 2002; Schodek et al., 2005; Lee, 2005).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	dfec
authors	Hornyanszky-Dalholm, Elisabeth and Rydberg-Mitchell, Birgitta
year	1991
title	THE FULL-SCALE METHOD AS A TOOL FOR PARTICIPATION
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 23-30
summary	In Lund the full-scale laboratory is mainly used as a tool for citizen or user participation. Our intention is to develop the full-scale method further for this purpose. For several years now, we have carried through projects together with different users - mainly people from various types of working-places but recently also with dwellers. Most of our work has been financed by our clients, i.e. private enterprises, trade unions, county councils or municipalities, but since this summer we also receive support from the Swedish Council for Building Research. We have worked with many types of environments and their specific problems, but thanks to the research money we will now have an opportunity to develop our method in a more conscious manner. The purpose of our research is to increase the awareness of the different mechanisms involved in the participant/user process. We want to improve and refine our method and evaluate its advantages and disadvantages compared to other media for spatial communication. In our research program we will now present some criteria that have developed from our previous experiences and which we find essential to our future work.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:16

_id	2005_115
id	2005_115
authors	Oxman, Rivka and Rotenstreich, Ruth
year	2005
title	Conceptual Content of Digital Design
doi	https://doi.org/10.52842/conf.ecaade.2005.115
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 115-121
summary	Concepts related to digital architecture have begun to occupy a central role in current architectural discourse. Design concepts that have been the conceptual content of this discourse are now becoming integrated into the general architectural discourse. The research reports on this process of the emergence, migration, and crystallization of a new conceptual structure over the past decade under the influence of digital design and its emerging conceptual structure. The research presented in this paper examines the emergence of new ideas in architectural thinking that are related to digital architecture since 1990 until today. In order to demonstrate this shift, we have selected a representative architectural building type that is strongly and directly influenced by the conceptual content of the cultural discourse in architecture. A museum type was selected to represent features of the expression that reflects the changes and evolution of conceptual structures that underlie digital design. The research methodology is based on a method known as “content analysis”. Content analysis in our research was de- fined as including textual material in books, book chapters, essays, articles, and historical documents. A new approach for Design Content Analysis was accomplished employing the ICF analytical framework. In order to conduct a content analysis the text was coded and was broken down into categories on a variety of theoretical design themes. Our findings demonstrate that certain expressions related to digital technology have moved up from a low level descriptive function to a significant conceptual role in formulating the design content of architectural design. In our paper we describe the research, methodology findings and contribution to the definition of the conceptual content of contemporary architectural discourse on digital architecture.
keywords	Digital Design, Digital Architecture, Content Analysis, Conceptual Design
series	eCAADe
email
last changed	2022/06/07 08:00

_id	22de
authors	Oxman, Rivka E.
year	1990
title	The Role of Knowledge-Based Systems in Design and Design Education
source	Int. J. Appl. Enging, Ed England: Pergamon Press, 1990. vol. 6: pp. 255-264 : ill. includes bibliography.
summary	This paper investigates the role of Artificial Intelligence and Knowledge Based Design in the emergence of a 'general design science' common to all engineering design. The advantages of the design shell's approach is demonstrated relative to the utilization of expert systems for design. The design shell is proposed as a medium to accommodate the characteristics of design knowledge. The significance of this concept is discussed with respect to formalization of knowledge, implementation, application and operation in knowledge based systems. GRPS - a generative prototype refinement design shell is defined and elaborated. A system applying this concept in a significant structure of generic knowledge in architectural design is demonstrated. It utilizes a method for representing structured knowledge by exploiting the characteristics of both rules and frames, and integrates them in a prototype based design system. Finally, the significance of such an approach in research and design teaching is discussed
keywords	design, education, knowledge base, expert systems, frames, architecture
series	CADline
email
last changed	2003/06/02 13:58

_id	sigradi2007_af89
id	sigradi2007_af89
authors	Rodrigues, Gelly; Gabriela Celani
year	2007
title	Cognitive modeling of the creative process in architecture by means of the object-oriented programming technique [Modelagem cognitiva do processo criativo em arquitetura por meio da técnica de programação orientada a objetos]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 275-279
summary	The aim of this research was to investigate the relationship between the object-oriented paradigm and the design process in architecture. The work was inspired by Mitchell´s (1990) comparison between architectural types and classes of objects. An analogy was set between the development of classes and the structuring of design problems based on architectural typologies. The method was then compared to Alexander´s (1964) in terms of levels of abstraction. Two classes were implemented, illustrating the application of the object-oriented paradigm in architectural design. The method developed is expected to help architects develop a new understanding of the design process.
keywords	Design process; design method; object-oriented programming
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ae95
authors	Seebohm, Thomas
year	1990
title	CAD and the Baroque
doi	https://doi.org/10.52842/conf.acadia.1990.079
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 79-97
summary	After a review of various methods of teaching computer aided design in schools of architecture, including "the conventional wisdom of CAD", an approach is presented whereby the application of this "wisdom” is taught by creating very complex drawings of Baroque elevations. A description is given of how such drawings may be structured and of how a group of students may work on such drawings simultaneously to complete them expeditiously. An extension of this method of teaching architectural CAD is discussed wherein students would not only draw but would also design detailed elevations and plans of villas in the Palladian manner using recently developed computer aids to assist in the design.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	9f6f
authors	Seebohm, Thomas
year	1990
title	Deconstructing the Constructivist Drawings of Iakov Chernikhov
doi	https://doi.org/10.52842/conf.acadia.1990.061
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 61-77
summary	The three-dimensional nature of Chernikhov's Constructivist architecture can be analyzed by a method of reverse perspective deconstruction. After a review and classification of the drawings in Chernikhov's book, 101 Architectural Fantasies, to determine which classes are suitable for deconstruction, the method of perspective deconstruction together with the underlying assumptions is presented and applied to three drawings. Conclusions concerning the forms comprising the architecture depicted in Chernikhov's images and the possibility of representing this Constructivist architecture by shape grammars are discussed.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	architectural_intelligence2022_4
id	architectural_intelligence2022_4
authors	Yihui Li, Wen Gao & Borong Lin
year	2022
title	From type to network: a review of knowledge representation methods in architecture intelligence design
doi	https://doi.org/https://doi.org/10.1007/s44223-022-00006-9
source	Architectural Intelligence Journal
summary	With the rise of the next generation of artificial intelligence driven by knowledge and data, the research on knowledge representation in architecture is also receiving widespread attention from the academia. This paper sorts out the evolution of architectural knowledge representation methods in the history of architecture, and summarizes three progressive representation frameworks of their development with type, pattern and network. By searching these three keywords in the Web of Science Core Collection among 4867 publications from 1990 to 2021, the number of publications in the past 5 years raised more than 50%, which show significant research interest in architecture industry in recent years. Among them, the first two are static declarative knowledge representation methods, while the network-based knowledge representation method also includes procedural knowledge representation methods and provides a way for knowledge association. This means the network representation has more advantage in terms of the logical completeness of knowledge representation, and accounts for 67% of the current research on knowledge representation in architecture. In the context of the rapid development of artificial intelligence, this method can realize the construction of architectural knowledge system and greatly improve the work efficiency of the building industry. On the other hand, in the face of carbon-neutral sustainable development scenarios, using knowledge representation, building performance knowledge and design knowledge could be expressed in a unified manner, and a personalized and efficient workflow for performance-oriented scheme design and optimization would be achieved.
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

For more results click below: