Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 262

Reformat results as: short short into frame detailed detailed into frame

_id	8bf3
authors	McCullough, M., Mitchell, W.J. and Purcell, P. (Eds.)
year	1990
title	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [Conference Proceedings]
source	International Conference on Computer-Aided Architectural Design 1989/ ISBN 0-262-13254-0] (Massachusetts / USA), 1989, 505 p.
summary	Design is the computation of shape information that is needed to guide fabrication or construction of artifacts. But it is not so straightforward as, say, the computation of numerical information required to balance a checkbook. This is partly because algebras of shapes are not as well understood and precisely formalized as algebras of numbers, partly because the rules for carrying out shape computations tend to be fluid and ill defined and partly because the predicates that must be satisfied to achieve successful termination are often complex and difficult to specify. For centuries architects have carried out shape computations by hand, using informal procedures and the simplest of tools. Over the last two decades though, they have made increasing use of more formal procedures executed by computers. It is still too early to be sure of the gains and losses that follow from this development, but there is no doubt that it raises some challenging questions of architectural theory and some perplexing issues for those concerned with the future of architectural education. This book frames those issues and provides a diversity of perspectives on them. Its contents were initially presented at the CAAD Futures 89 Conference-an international gathering of researchers and teachers in the field of computer-aided architectural design which was jointly sponsored by the Harvard Graduate School of Design and the MIT Department of Architecture and held in Cambridge, Massachusetts, in July 1989. There are four major sections: Theoretical Foundations, Knowledge-Based Design Tools, Information Delivery Systems, and Case Studies: Electronic Media in the Design Studio. In a representative collection of current views, over thirty extensively illustrated papers discuss the experiences of universities in the USA, Europe, Japan, Israel, Canada, and Australia, articulate present theoretical and practical concerns, provide criticism of media and methods, and suggest directions for the future. Architectural educators and architects concerned with the effect of computer technology on the design process will find here an indispensable reference and a rich source of ideas. This book was itself prepared in an electronic design studio. Composition and typography, most image collection and placement, and such editing as was practical within this publishing format, were all performed digitally using Macintosh computers at the Harvard Graduate School of Design during a period of a few weeks in 1989.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	f507
authors	Mitchell, W.
year	1990
title	The Logic of Architecture: Design, Computation and Cognition
source	The MIT Press, Cambridge
summary	The Logic of Architecture is the first comprehensive, systematic, and modern treatment of the logical foundations of design thinking. It provides a detailed discussion of languages of architectural form, their specification by means of formal grammars, their interpretation, and their role in structuring design thinking. Supplemented by more than 200 original illustrations, The Logic of Architecture reexamines central issues of design theory in the light of recent advances in artificial intelligence, cognitive science, and the theory of computation. The richness of this approach permits sympathetic and constructive analysis of positions developed by a wide range of theorists and philosophers from Socrates to the present. Mitchell first considers how buildings may be described in words and shows how such descriptions may be formalized by the notation of first order predicate calculus. This leads to the idea of a critical language for speaking about the qualities of buildings. Turning to the question of representation by drawings and scale models, Mitchell then develops the notion of design worlds that provide graphic tokens which can be manipulated according to certain grammatical rules. In particular, he shows how domains of graphic compositions possible in a design world may be specified by formal shape grammars. Design worlds and critical languages are connected by showing how such languages may be interpreted in design worlds. Design processes are then viewed as computations in a design world with the objective of satisfying predicates of form and function stated in a critical language.
series	other
last changed	2003/04/23 15:14

_id	3824
authors	Mitchell, William J.
year	1989
title	A New Agenda for Computer-Aided Architectural Design
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 27-43
doi	https://doi.org/10.52842/conf.acadia.1989.027
summary	The essential theoretical foundations for today's practical computer-aided design systems were laid more than two decades ago. They have served us well, but they are now sorely in need of revision. This paper suggests some directions that this revision might take. In particular, I focus on the roles of ambiguity and discontinuity in shape interpretation, instability in rules for carrying out shape computations, and nonmonotonicity in critical reasoning. I suggest that the challenge before us is to build a new generation of CAD systems that respond in sophisticated ways to these issues.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	7ee7
authors	Norman, Richard B.
year	1990
title	Electronic Color: The Art of Color Applied to Graphic Computing
source	New York: Van Nostrand Reinhold
summary	A beautifully illustrated volume for architects and designers that reviews the theoretical foundations of color and design. The book explores the ideas of Albers, Itten, Kandinsky, Munsell, and other theorists, and provides a technical base for their application to architecture and design by means of color graphic computing. 181 color illustrations.
series	other
last changed	2003/04/23 15:14

_id	caadria2006_047
id	caadria2006_047
authors	SHAI YESHAYAHU, A.; B. MARIA VERA
year	2006
title	CUT, COPY, PASTE SOCIETY
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 47-52
doi	https://doi.org/10.52842/conf.caadria.2006.x.g1r
summary	You and I were not born in the 1990’s thus our experience about the true modalities of circulation and communication that have substantially transformed the methods that form and inform us today, are not really “pure”. Why? Because we know how slow time was before the communication boom of this last decade and because some of us still believe that we must read to be inform and thus, visit a bookstore, library or friends house and get peeks inside a subject of matter. So experiencing life as we bypass the book _ that’s a story of a brand new era! Taking note of the enormous changes this era brings, is fundamental to our current pedagogic undertakings. We seek data about the differences that lie in the way individuals, which never knew a world before or between analogue and digital zones, process information. It signals a dramatic shift in cognitive realms that is deeply imbedded in our emerging socio-economic spheres. So, you say “hypothesizing that economic, technologic, and cultural fluxes fabricate new means to learn and think, is not a fresh idea”_ True. But, it led us to ask one fundamental question _What are the upcoming learning habits employed by the “post digital” society? We noted that the post digital generation is an avid cut, copy, paste society that is able to extract information from infinite resources and mix, remix in diversified modes, through time and in real-time. We think these abilities are strengths, which will permit students to multitask yet they strongly differ from the academic agendas that are concerned with meditative processes and qualitative interdisciplinary task. As aspiring academics interested in the reconfiguration of current pedagogic formats we seek a creative intervention for future design generations, one that can benefit both the upheavals of the cultural world and the integrity of the academic setting where a pedagogy that links extended fields of knowledge with shifting cognitive habits can emerge. In this arena where cognition plays an important role, our goals are challenging and difficult, especially in the beginning years when the foundations set forward leaves lasting impressions. Thus, letting go of familiar grounds and tuning to continual alterations of the immediate surroundings enables us to seek means that facilitate important readings for our current learning/teaching processes. Demystifying changes and embracing differences as design potentials for new interventions are basic programmatic elements that permit us to incorporate a rigorous research agenda in the design exercises. Our presentation will project the current state of our teaching modality and provide examples of current studio work. It will demonstrate how everyday rituals, journeys and research observations, are documented by a society that heralds a new academic setting.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	849b
authors	Amiel, Maurice
year	1991
title	NOTES ON IN-SITU – FULL-SCALE EXPERIMENTATION AND THE DESIGN PROFESSIONS
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 40-43
summary	In the north american academic context a workshop is different from a paper session in that it is simply an opportunity to exchange ideas and to raise questions among colleagues who can bring to bear in their discussion various points of view and experiences otherwise unavailable.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	4d0d
authors	Angelil, Mark
year	1990
title	Experiments as Modus Operandi
source	Journal of Architectural Education. November, 1990. Vol. 44: pp. 37-48 : 9 p. of ill
summary	Architecture has for too long focused on the presentation of pristine objects and the presentation in drawing form. A critical understanding of the field, however, necessitates a reevaluation of the roles of the process involved in the production of building. Rather than emphasizing surface appearances, an architecture rooted in process aims ultimately at revealing the fundamental and deep structures inherent within the making of architecture. One of the primary tasks of the process is to provoke intuition and ingenuity - and the awareness that both are founded on knowledge - and that knowledge must be applied with imagination. The experiment presented here developed sequentially with a defined structure to the process of design, moving gradually from the abstract into the concrete, thereby attempting and understanding of what Roland Barthes identified as 'concrete abstraction.'
keywords	design process, architecture, knowledge, experimentation
series	CADline
last changed	1999/02/12 15:07

_id	e90b
authors	Arbab, Farhad
year	1990
title	Set Models and Boolean Operations for Solids and Assemblies
source	IEEE Computer Graphics and Applications November, 1990. vol. 10: pp. 76-86 : ill. includes bibliography.
summary	Application of solid modeling in computer-aided design, computer-aided manufacturing, and robotics often involve aggregates or assembling of disconnected pieces. This article presents an alternative CSG-like formalism based on open sets, in which both assemblies and connected pieces are modeled as points sets. Consequently, the same Boolean operations apply uniformly to connected pieces and assemblies
keywords	assemblies, CSG, solid modeling, boolean operations
series	CADline
last changed	1999/02/12 15:07

_id	4ac0
authors	Balachandran, M. B. and Gero, John S.
year	1990
title	Knowledge Engineering and Multicriteria Optimization
source	Berlin: Springer-Verlag, 1990. pp. 115-147. CADLINE has abstract only
summary	Many aspects of optimization, including problem formulation, algorithm selection and the interpretation of results require human judgment and experience, and are traditionally carried out by humans. Recently developed knowledge-based system methodologies now allow us to incorporate different forms of knowledge required to carry out such non-numeric tasks. The role and effectiveness of knowledge-based methodologies in multicriteria optimization are described and illustrated with examples
keywords	design, multicriteria, optimization, knowledge base
series	CADline
email
last changed	2003/06/02 13:58

_id	044f
authors	Balachandran, M.B. and Gero, John S.
year	1990
title	Role of Prototypes in Integrating Expert Systems and CAD Systems
source	Berlin: Springer-Verlag, 1990. v: Design: pp. 195-211
summary	This paper describes concepts which allow the development of integrated systems that combine the two technologies of expert systems and computer-aided drafting systems. It demonstrates how an expert system can be used for evaluating and criticizing designs described using traditional CAD packages. The notion of 'prototypes' has been used to play the central role in such an integration. The development, implementation and operation issues of an integrated system, called IPEXCAD, are described
keywords	expert systems, prototypes, design, CAD, integration, drafting
series	CADline
email
last changed	2003/06/02 13:58

_id	969c
authors	Barnes, Thomas
year	1990
title	Dynamic Interaction of Solids as a Design Tool
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 29-40
doi	https://doi.org/10.52842/conf.acadia.1990.029
summary	Architectural form and order can sometimes be described as having dynamic characteristics. To capitalize on this notion, physical qualities (mass, velocity, material elasticity, and friction) are given to objects. The objects are set in motion and allowed to interact at will with each other and their environment. The physical qualities are the rules that govern the outcome of interactions. As a result, interactions can lead to affine transformations (translate, scale, rotate), reformations (topological editing), and/or deformations (geometrical editing) of the objects. The designer can investigate the effects of interaction between dynamic elements, vary their physical qualities, and evaluate the appropriateness of the outcome as a solution to the design problem.
series	ACADIA
last changed	2022/06/07 07:54

_id	4cf2
authors	Barsky, Brian A.
year	1990
title	Geometric Continuity of Parametric Curves : Constructions of Geometrically Continuous Splines
source	IEEE Computer Graphics and Applications. January, 1990. vol. 10: pp. 60-68 : ill
summary	This article is part two of an article published in November 1989. In the first article theoretical foundations for geometric continuity were presented. In this article the basic theory was applied to the construction of geometrically continuous spline curves
keywords	Bezier, curves, curved surfaces, splines, continuity, computational geometry, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	6a30
authors	Bonn, Markus
year	1989
title	Modeling Architectural Forms through Replacement Operations
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 103-130
doi	https://doi.org/10.52842/conf.acadia.1989.103
summary	Replacement operations, where an element at any topological level may be replaced by another element at the same or different topological level, are defined. Their potential as design tools which may be incorporated in a CAD system is investigated and demonstrated through the experimental implementation of two such operations in MARCOS, a Modeling Architectural Compositions System. MARCOS has been written in C. It is highly interactive and runs on an Apple Macintosh IIx. The two operations which have been implemented are the face -> volume and volume -> volume replacements. They were chosen for their potential as generators of architectural forms. Examples of architectural compositions produced through the use of replacement operations are also illustrated.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	64b2
authors	Brown, G. Z.
year	1990
title	Desirable Interface Characteristics of Knowledge-Based Energy Software Used by Architects
source	March, 1990. 14 p. : ill. includes bibliography
summary	This paper describes ongoing research projects on the development of user interfaces for energy software to be used by architects. The paper takes the position that the goal of knowledge-based design software should be to help the architect to visualize the unimagined. In order to approach this goal the unique characteristics of the architectural design process must be understood and used in the creation of software. The two characteristics discussed are: the architectural design process emphasizes synthesis rather than analysis, and the symbols used to transmit knowledge are primarily graphic abstractions rather than alpha-numeric abstractions
keywords	user interface, architecture, design process, knowledge base, software, energy
series	CADline
last changed	2003/06/02 13:58

_id	8927
authors	Brown, G.Z., McDonald, M. and Meacham, M.
year	1990
title	A Review of Computer Use in Industrialized Housing
source	October, 1990. 72 p. : ill. includes bibliography
summary	The U.S. housing industry is becoming increasingly industrialized. In the process, housing production is becoming more standardized and rationalized, which have the potential to make computerization of the production process easier. This report reviews, assess and documents the extent of computer use in marketing, design, engineering and manufacturing of industrialized housing. Compares and contrasts the state of the art in U.S. vs. Japan and Western Europe. It assess and documents the needs of the domestic industry in this field, and establishes design criteria for new computerized energy tools unique to industrialized housing
keywords	prefabrication, housing, CAD, practice, building, energy, management
series	CADline
last changed	2003/06/02 13:58

_id	abc9
authors	Campbell, A.T. and Fussell, D.S.
year	1990
title	Adaptive Mesh Generation for Global Diffuse Illumination
source	Computer Graphics Proc. SIGGRAPH 90 Vol. 24, No. 4, Aug. 1990, pp. 155-164
summary	Rapid developments in the design of algorithms for rendering globally illuminated scenes have taken place in the past five years. Net energy methods such as the hemicube and other radiosity algorithms have become very effective a t computing the energy balance for scenes containing diffusely reflecting objects. Such methods first break up a scene description into a relatively large number of elements, or possibly sev- eral levels of elements. Energy transfers among these ele- ments are then determined using a variety of means. While much progress has been made in the design of energy transfer algorithms, little or no attention has been paid to the proper generation of the mesh of surface elements. This pa- per presents a technique for adaptively creating a mesh of surface elements as the energy transfers are computed. The method allows large numbers of small elements to be placed at parts of the scene where the most active energy trans- fers occur without requiring that other parts of the scene be needlessly subdivided to the same degree. As a result, the computational effort in the energy transfer computations can be concentrated where it has the most effect. CR Categories and Subject Descriptors: 1.3.3 [Computer Graphics]: Picture/Image Generation-Display algorithms. 1.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism. General Terms: Algorithms Additional Key Words and Phrases: global illumination, radiosity, mesh-generation, diffuse, data structure, incremental.
series	journal paper
last changed	2003/04/23 15:50

For more results click below: