Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 252

Reformat results as: short short into frame detailed detailed into frame

_id	abc9
authors	Campbell, A.T. and Fussell, D.S.
year	1990
title	Adaptive Mesh Generation for Global Diffuse Illumination
source	Computer Graphics Proc. SIGGRAPH 90 Vol. 24, No. 4, Aug. 1990, pp. 155-164
summary	Rapid developments in the design of algorithms for rendering globally illuminated scenes have taken place in the past five years. Net energy methods such as the hemicube and other radiosity algorithms have become very effective a t computing the energy balance for scenes containing diffusely reflecting objects. Such methods first break up a scene description into a relatively large number of elements, or possibly sev- eral levels of elements. Energy transfers among these ele- ments are then determined using a variety of means. While much progress has been made in the design of energy transfer algorithms, little or no attention has been paid to the proper generation of the mesh of surface elements. This pa- per presents a technique for adaptively creating a mesh of surface elements as the energy transfers are computed. The method allows large numbers of small elements to be placed at parts of the scene where the most active energy trans- fers occur without requiring that other parts of the scene be needlessly subdivided to the same degree. As a result, the computational effort in the energy transfer computations can be concentrated where it has the most effect. CR Categories and Subject Descriptors: 1.3.3 [Computer Graphics]: Picture/Image Generation-Display algorithms. 1.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism. General Terms: Algorithms Additional Key Words and Phrases: global illumination, radiosity, mesh-generation, diffuse, data structure, incremental.
series	journal paper
last changed	2003/04/23 15:50

_id	effd
authors	Morozumi, M., Nakamura, H. and Kijima, Y.
year	1990
title	A Primitive-Instancing Interactive 3-D Modeling System for Spatial Design Studies
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 457-468
summary	The authors have developed a basic, interactive, primitive-instancing 3-D modeling system (CAADF), which is based on a high-speed 3-D color graphic workstation, and have tested its potential ability to support spatial design studies in an architectural design studio. After- a review of work performed by a student with the system, this paper concludes that this system provides an attractive environment for spatial design studies which conventional CAD systems have not achieved. The interactive process of 3-D modeling in perspective or isometric view images and the dynamic viewing utility are the most successful features of the system. In contrast to those advantages, the resolution of color graphic display is a limitation of the system. The authors conclude that if sufficiently many appropriate 3-D geometric primitives are supported by a CAD system, a primitive instancing method can significantly reduce the work entailed in object modeling.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	cf2009_poster_25
id	cf2009_poster_25
authors	Nembrini, Julien; Guillaume Labelle, Nathaniel Zuelzke, Mark Meagher and Jeffrey Huang
year	2009
title	Source Studio: Teaching Programming For Architectural Design
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	The architectural studio framework presented here is based on the use of programming as central form generation reflexive medium (Schon, 1983). Its aim is to teach architectural design while introducing a different approach toward computer tools by enabling students to fully explore variations in their designs through the use of coding for form definition. It proposes the students to reflect on their design process through its confrontation to algorithmic formalization (Mitchell 1990). This results in exercising the synthetic re-thinking of their initial sketch intents to comply with the difficult task of fitting the language syntax. With the proliferation and constant replacement of computer tools among the architectural practice, a shift appears in the attitude towards introducing students to different tools: studio teaching is branded by specific software platforms advocated by the teaching team. A lack of generalized view, independent of commercial CAD software, is problematic for the definition of new teaching tools suited for this constantly evolving situation (Terzidis, 2006).
keywords	Programming, studio teaching, scripting, parametric design
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	3105
authors	Novak, T.P., Hoffman, D.L., and Yung, Y.-F.
year	1996
title	Modeling the structure of the flow experience
source	INFORMS Marketing Science and the Internet Mini-Conference, MIT
summary	The flow construct (Csikszentmihalyi 1977) has recently been proposed by Hoffman and Novak (1996) as essential to understanding consumer navigation behavior in online environments such as the World Wide Web. Previous researchers (e.g. Csikszentmihalyi 1990; Ghani, Supnick and Rooney 1991; Trevino and Webster 1992; Webster, Trevino and Ryan 1993) have noted that flow is a useful construct for describing more general human-computer interactions. Hoffman and Novak define flow as the state occurring during network navigation which is: 1) characterized by a seamless sequence of responses facilitated by machine interactivity, 2) intrinsically enjoyable, 3) accompanied by a loss of self-consciousness, and 4) selfreinforcing." To experience flow while engaged in an activity, consumers must perceive a balance between their skills and the challenges of the activity, and both their skills and challenges must be above a critical threshold. Hoffman and Novak (1996) propose that flow has a number of positive consequences from a marketing perspective, including increased consumer learning, exploratory behavior, and positive affect."
series	other
last changed	2003/04/23 15:50

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	2f1a
authors	Dabney, M.K., Wright, J.C. and Sanders, D.H.
year	1999
title	Virtual Reality and the Future of Publishing Archaeological Excavations: the multimedia publication of the prehistoric settlement on Tsoungiza at Ancient Nemea
source	New York: The Metropolitan Museum of Art
summary	The Nemea Valley Archaeological Project is a study of settlement and land use in a regional valley system in Greece extending from the Upper Paleolithic until the present. Active field research was conducted by four teams between 1981 and 1990. The first component was a regional archaeological survey. Second, and closely related to the first, was a social anthropological study of modern settlement and land use. Next was a team assigned to excavate the succession of prehistoric settlements of Ancient Nemea on Tsoungiza. Last, historical ecologists, a palynologist, and a geologist formed the environmental component of the research. As a result of advances in electronic publishing, plans for the final publication of the Nemea Valley Archaeological Project have evolved. Complete publication of the excavation of the prehistoric settlements of Ancient Nemea on Tsoungiza will appear in an interactive multimedia format on CD/DVD in Fall 2000. This project is planned to be the first electronic publication of the American School of Classical Studies at Athens. We have chosen to publish in electronic format because it will meet the needs and interests of a wider audience, including avocational archaeologists, advanced high school and college students, graduate students, and professional archaeologists. The multimedia format on CD/DVD will permit the inclusion of text, databases, color and black-and-white images, two and three-dimensional graphics, and videos. This publication is being developed in cooperation with Learning Sites, Inc., which specializes in interactive three-dimensional reconstructions of ancient worlds http://www.learningsites.com. The Nemea Valley Archaeological Project is particularly well prepared for the shift towards electronic publishing because the project's field records were designed for and entered in computer databases from the inception of the project. Attention to recording precise locational information for all excavated objects enables us to place reconstructions of objects in their reconstructed architectural settings. Three-dimensional images of architectural remains and associated features will appear both as excavated and as reconstructed. Viewers will be able to navigate these images through the use of virtual reality. Viewers will also be able to reference all original drawings, photographs, and descriptions of the reconstructed architecture and objects. In this way a large audience will be able to view architectural remains, artifacts, and information that are otherwise inaccessible.
series	other
last changed	2003/04/23 15:14

_id	6ab7
authors	Korson, Tim and McGregor, John D.
year	1990
title	Understanding Object- Oriented : A Unifying Paradigm
source	Communications of the ACM September, 1990. vol. 33: pp. 40-60. includes bibliography.
summary	The purpose of this paper is to introduce terminology, concepts and basic techniques surrounding the object-oriented paradigm. software / OOPS / programming. 63. Koskela, Lauri, Raija Hynynen and Martti Kallavuo, et al. 'Expert Systems in Construction - Initial Experiences.' CAD and Robotics in Architecture and Construction, Proceedings of the International Joint Conference = CAO et Robotique en Architecture et B.T.P. Actes des Journees Internationales. June, 1986. Paris: Hermes, pp. 167-176. includes bibliography and abstracts in French and English. This paper describes development of expert systems for construction applications in the Laboratory of Building Economics of the Technical Research Centre of Finland. Five small expert systems are described. Experiences gained in the development work are evaluated. The future significance of expert systems for the construction industry is discussed, and an approach towards expert systems to be adopted by organizations in the construction industry is suggested
keywords	construction, applications, economics, expert systems, knowledge, evaluation, analysis
series	CADline
last changed	2003/06/02 10:24

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	cf2011_p093
id	cf2011_p093
authors	Nguyen, Thi Lan Truc; Tan Beng Kiang
year	2011
title	Understanding Shared Space for Informal Interaction among Geographically Distributed Teams
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 41-54.
summary	In a design project, much creative work is done in teams, thus requires spaces for collaborative works such as conference rooms, project rooms and chill-out areas. These spaces are designed to provide an atmosphere conducive to discussion and communication ranging from formal meetings to informal communication. According to Kraut et al (E.Kraut et al., 1990), informal communication is an important factor for the success of collaboration and is defined as ‚Äúconversations take place at the time, with the participants, and about the topics at hand. It often occurs spontaneously by chance and in face-to-face manner. As shown in many research, much of good and creative ideas originate from impromptu meeting rather than in a formal meeting (Grajewski, 1993, A.Isaacs et al., 1997). Therefore, the places for informal communication are taken into account in workplace design and scattered throughout the building in order to stimulate face-to-face interaction, especially serendipitous communication among different groups across disciplines such as engineering, technology, design and so forth. Nowadays, team members of a project are not confined to people working in one location but are spread widely with geographically distributed collaborations. Being separated by long physical distance, informal interaction by chance is impossible since people are not co-located. In order to maintain the benefit of informal interaction in collaborative works, research endeavor has developed a variety ways to shorten the physical distance and bring people together in one shared space. Technologies to support informal interaction at a distance include video-based technologies, virtual reality technologies, location-based technologies and ubiquitous technologies. These technologies facilitate people to stay aware of other‚Äôs availability in distributed environment and to socialize and interact in a multi-users virtual environment. Each type of applications supports informal interaction through the employed technology characteristics. One of the conditions for promoting frequent and impromptu face-to-face communication is being co-located in one space in which the spatial settings play as catalyst to increase the likelihood for frequent encounter. Therefore, this paper analyses the degree to which sense of shared space is supported by these technical approaches. This analysis helps to identify the trade-off features of each shared space technology and its current problems. A taxonomy of shared space is introduced based on three types of shared space technologies for supporting informal interaction. These types are named as shared physical environments, collaborative virtual environments and mixed reality environments and are ordered increasingly towards the reality of sense of shared space. Based on the problem learnt from other technical approaches and the nature of informal interaction, this paper proposes physical-virtual shared space for supporting intended and opportunistic informal interaction. The shared space will be created by augmenting a 3D collaborative virtual environment (CVE) with real world scene at the virtual world side; and blending the CVE scene to the physical settings at the real world side. Given this, the two spaces are merged into one global structure. With augmented view of the real world, geographically distributed co-workers who populate the 3D CVE are facilitated to encounter and interact with their real world counterparts in a meaningful and natural manner.
keywords	shared space, collaborative virtual environment, informal interaction, intended interaction, opportunistic interaction
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2021_065
id	ecaade2021_065
authors	Sdegno, Alberto and De Lorenzo, Andrea
year	2021
title	Geometric Parametrization of a New Town - The case study of Lignano Pineta by Marcello D'Olivo
doi	https://doi.org/10.52842/conf.ecaade.2021.1.537
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 537-544
summary	This research focuses on the geometric analysis of a project by the architect Marcello D'Olivo, in which the role of parametrization could be a significant part.The first phase was an in-depth study of the compositional syntax of the author, in order to understand the rules adopted by him to design architectures. As he worked between 1950 and 1990, he didn't use digital software for the computation of his projects, but only traditional instruments.The second phase was a description of digital computational procedures to generate models using parametric software. The digitization of some morphologies designed by D'Olivo was converted in shape algorithms.So the aim of the research was to convert his analog procedures into a series of well-defined digital steps, in order to systematize a way to proceed to control complex forms and to attempt to build a bridge between the pencil projects of D'Olivo and parametric design.
keywords	Geometric Parametrization; Shape grammar; Marcello D’Olivo
series	eCAADe
email
last changed	2022/06/07 07:56

_id	e80e
authors	Van der Does, Jan
year	1993
title	Visualising by Means of Endoscope, Computer and Hand-Drawn Techniques
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 167-180
summary	Traditionally, communication during the various stages of the building process takes place via drawings of floor plans, elevations, perspectives and scale models. Computerized drawing techniques have recently come into use. Ways of presenting designs have increasingly become of far-reaching importance in current architecture. Nowadays architectural firms employ specialists who are familiar with the latest developments in the field of presentation techniques, or they farm this highly significant part of their job out to gifted designers. Some of the new techniques being developed endeavor to provide a more realistic presentation of designs of housing estates. Apart from new drawing techniques, mention should also be made of the endoscope, an instrument which can simulate an eye-level tour around a scale model while recording it on videotape. Realistic representations differ quite a lot from the conventional architectural presentation techniques applied, which require a larger amount of imagination on the part of the onlookers. The afore mentioned architectural notation systems, on the one hand, can only be understood by experts, in spite of added explanatory signs and symbols. The often used models and artist’s impressions, on the other hand, frequently create a somewhat distorted view, due to lack of concern for spatial proportions. As a consequence, the design presented and the actual architectural realisation may turn out to differ widely. To bridge the widening gap between the experts and the users, clients and government officials, research concerning architectural representation is needed. In 1990 a Dutch scientific journal, issued by The Delft University, published an illustrated report of research findings under the title Overdracht en Simulatie (Information and Simulation). The article gives a description of a pilot study carried out by a research team (Van Der Does, Van Haaften, Kegel and Vrins) to assess and evaluate various presentation techniques used in architecture. This study was just a first step towards a more detailed follow-up study, to which I shall come back after having given a summarized view of the pilot study.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	8c66
authors	Brooks, Frederick P. Jr., Ouh-Young,Ming and Batter, James J. (et al)
year	1990
title	Project GROPE - Haptic Displays for Scientific Visualization
source	SIGGRAPH '90 Conference Proceedings August, 1990. vol. 24 ; no. 4: pp. 177-185 : ill. (some col.). includes bibliography.
summary	A project to develop a haptic and display for 6-D force fields of interacting protein molecules was began in 1967. The authors approached it in four stages: a 2-D system, a 3-D system tested with a simple task, a 6-D system tested with a simple task, and a full 6-D molecular docking system, which was the initial goal. This paper summarize the entire project, the four systems, the evaluation experiments, the results, and the authors observations
keywords	user interface, computer graphics, visualization, virtual reality
series	CADline
last changed	2003/06/02 10:24

_id	f9e5
authors	Cherneff, Jonathan Martin
year	1990
title	Knowledge Based Interpretation of Architectural Drawings
source	Massachusetts Institute of Technology, Department of Civil Engineering, Cambridge, MA
summary	Architectural schematic drawings have been used to communicate building designs for centuries. The symbolic language used in these drawings efficiently represents much of the intricacy of the building process (e.g. implied business relationships, common building practice, and properties of construction materials). The drawing language is an accepted standard representation for building design, something that modern data languages have failed to achieve. In fact, the lack of an accepted standard electronic representation has hampered efforts at computer intergration and perhaps worsened industry fragmentation. In general, drawings must be interpreted, by a professional, and then reentered in order to transfer them from one CAD system to another. This work develops a method for machine interpretation of architectural (or other) schematic drawings. The central problem is to build an efficient drawing parser (i.e. a program that identifies the semantic entitites, characteristics, and relationships that are represented in the drawing). The parser is built from specifications of the drawing grammar and an underlying spatial model. The grammar describes what to look for, and the spatial model enables the parser to find it quickly. Coupled with existing optical recognition technology, this technique enables the use of drawings directly as: (1) a database to drive various AEC applications, (2) a communication protocol to integrate CAD systems, (3) a traditional user interface.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	0faa
authors	Duelund Mortensen, Peder
year	1991
title	THE FULL-SCALE MODEL WORKSHOP
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 10-11
summary	The workshop is an institution, available for use by the public and established at the Laboratory of Housing in the Art Academy's school of Architecture for a 3 year trial period beginning April 1985. This resumé contains brief descriptions of a variety of representative model projects and an overview of all projects carried out so far, including the pilot projects from 1983 and planned projects to and including January 1987. The Full Scale Model Workshop builds full size models of buildings, rooms and parts of buildings. The purpose of the Full Scale Model Workshop is to promote communication among building's users. The workshop is a tool in an attempt to build bridges between theory and practice in research, experimentation and communication of research results. New ideas and experiments of various sorts can be tried out cheaply, quickly and efficiently through the building of full scale models. Changes can be done on the spot as a planned part of the project and on the basis of ideas and experiments achieved through the model work itself. Buildings and their space can thus be communicated directly to all involved persons, regardless of technical background or training in evaluation of building projects.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:23

_id	ab63
authors	Gross, Mark D.
year	1990
title	Relational Modeling: A Basis for Computer-Assisted Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 123-136
summary	Today's computer assisted design (CAD) systems automate traditional ways of working with tracing paper and pencil, but they cannot represent the rules and relationships of a design. As hardware becomes faster and memory less expensive, more sophisticated fundamental software technologies will be adopted. This shift in the basis of CAD will provide powerful capabilities and offer new ways to think about designing. Recently parametric design, a technique for describing a large class of designs with a small description in code, has become a focus of attention in architectural computing. In parametric CAD systems, design features are identified and keyed to a number of input variables. Changes in the input values result in variations of the basic design. Based on conventional software technologies, parametric design has been successfully applied in many design domains including architecture and is supported by several commercial CAD packages. A weakness of parametric techniques is the need to predetermine which properties are input parameters to be varied and which are to be derived. Relational modeling is a simple and powerful extension of parametric design that overcomes this weakness. By viewing relations as reversible rather than one-way, any set of properties can be chosen as input parameters. For example, a relational model that calculates the shadow length of a given building can also be used to calculate the building height given a desired shadow length. In exercising a relational model the designer is not limited to a pre-selected set of input variables but can explore and experiment freely with changes in all parts of the model. Co is a relational modeling environment under development on the Macintosh-II computer, and Co-Draw, a prototype CAD program based on Co. Co's relationaI engine and object-oriented database provide a powerful basis for modeling design relations. Co-Draw's interactive graphics offer a flexible medium for design exploration. Co provides tools for viewing and editing design models in various representations, including spreadsheet cards, tree and graph structures, as well as plan and elevation graphics. Co's concepts and architecture are described and the implications for design education are discussed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8fc0
authors	Hall, A.
year	1990
title	Generating urban design objectives for local areas: A methodology and case study application to Chelmsford, Essex
source	Town Planning Review 61(3), pp. 287-309
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	c0a3
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1989
title	Component Based Computer Aided Learning for Students of Architecture and Civil Engineering
doi	https://doi.org/10.52842/conf.acadia.1989.193
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 193-208
summary	The paper describes the methodology and the current efforts to develop an interdisciplinary computer aided learning system for architects and civil engineers. The system being developed incorporates a component oriented relational database with an existing interactive 3-dimensional modeling system developed in the School of Architecture and Planning at SUNY Buffalo. The software will be used in existing courses in architecture and civil engineering as a teaching aid to help students understand the complex 3-dimensional interrelationships of structural components. Initial implementation has focused on the modeling of the components and assemblies for a lowrise steel frame structure. Current implementation efforts are focusing on the capability to view connections in various ways including the ability to "explode" a connection to better understand the sequence of construction and load paths. Appropriate codes, limit states of failure and specific data will be linked to each specific component in an expert system shell so that the system can offer feedback about a student generated connection and perhaps offer other possible connections a library of standard connections. Future expansion of the system will include adding other "systems" of a building, such as mechanical, electrical, plumbing, enclosure etc., to help students visualize the integration of the various parts.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	dfec
authors	Hornyanszky-Dalholm, Elisabeth and Rydberg-Mitchell, Birgitta
year	1991
title	THE FULL-SCALE METHOD AS A TOOL FOR PARTICIPATION
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 23-30
summary	In Lund the full-scale laboratory is mainly used as a tool for citizen or user participation. Our intention is to develop the full-scale method further for this purpose. For several years now, we have carried through projects together with different users - mainly people from various types of working-places but recently also with dwellers. Most of our work has been financed by our clients, i.e. private enterprises, trade unions, county councils or municipalities, but since this summer we also receive support from the Swedish Council for Building Research. We have worked with many types of environments and their specific problems, but thanks to the research money we will now have an opportunity to develop our method in a more conscious manner. The purpose of our research is to increase the awareness of the different mechanisms involved in the participant/user process. We want to improve and refine our method and evaluate its advantages and disadvantages compared to other media for spatial communication. In our research program we will now present some criteria that have developed from our previous experiences and which we find essential to our future work.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:16

_id	39e0
id	39e0
authors	Jablonski, Allen D.
year	1991
title	Integrated Component-based Computer Design Modeling System: The Implications of Control Parameters on the Design Process
source	New Jersey Institute of Technology, Newark, NJ Graduate Thesis - Master's Program College of Architecture
summary	The design process is dependent on a clear order of integrating and managing all of the control parameters that impact on a building's design. All component elements of a building must be defined by their: Physical and functional relations; Quantitative and calculable properties; Component and/or system functions. This requires a means of representation to depict a model of a building that can be viewed and interpreted by a variety of interested parties. These parties need different types of representation to address their individual control parameters, as each component instance has specific implications on all of the control parameters. Representations are prepared for periodic design review either manually through hand-drawn graphics and handcrafted models; or with the aid of computer aided design programs. Computer programs can profoundly increase the speed and accuracy of the process', as well as provide a level of integration, graphic representation and simulation, untenable through a manual process. By maintaining a single control model in an Integrated Component-based Computer Design Modeling System (ICCDMS), interested parties could access the design model at any point during the process. Each party could either: 1. Analyze individual components, or constraints of the model, for interferences against parameters within that party's control; or 2. Explore design alternatives to modify the model, and verify the integration of the components or functions, within the design model, as allowable in relation to other control parameters.
keywords	Architectural Design; Data Processing
series	thesis:MSc
type	extended abstract
email
more	http://www.library.njit.edu/etd/1990s/1990/njit-etd1990-005/njit-etd1990-005.html
last changed	2006/09/25 09:04

For more results click below: