Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 155

Reformat results as: short short into frame detailed detailed into frame

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	1e97
authors	Wojtowicz, Jerzy
year	1990
title	Aspects of design logic and Le Corbusier's universe of forms
source	Harvard University, Graduate School of Design
summary	Generation of form in architectural design tends to become a highly structured process when computational tools are engaged. The objective of this study was to develop an alternative way of designing with a computer--one that is not framed by assumptions of monotonicity and determinism. To realize this aim the case study method was chosen. It was followed by formalization and design etudes rooted in a specific corpus of significant design work. A corpus of work was isolated from Le Corbusier's Oeuvre complete to serve as the vehicle for: (a) Construction, using shape grammar rules of a dynamic model of a concise design world. (b) Analysis of the process of rupture and dialectic which results in the fundamental transformation of the design world. (c) Generation of existing and new examples in the given language. (d) Examination of the limitations of the shape grammar formalism and proposal of alternatives formalisms based on non-monotonic logic. Le Corbusier's purist tradition, selected as the corpus for this study, is characterized by formal continuity followed by a sudden rupture in its formal language. The issue of change and collapse of one design world into a new one was therefore the focus of the investigation. The method that was developed interprets the formal procedure of examining the architectural object as 'reading' and the procedure of generating the architectural object as 'writing'. Design is seen as a continuous feedback loop between reading and writing within the boundaries of a given universe of forms. This is demonstrated by abstracting an architectural vocabulary and compositional rules from Le Corbusier's purist work, translating the vocabulary into a set of computer models, and using the computer to transform and recompose these elements into new designs.
keywords	Data Processing; Composition; Proportion; Data Processing
series	thesis:PhD
email
last changed	2003/03/11 09:59

_id	831d
authors	Seebohm, Thomas
year	1992
title	Discoursing on Urban History Through Structured Typologies
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 157-175
doi	https://doi.org/10.52842/conf.acadia.1992.157
summary	How can urban history be studied with the aid of three-dimensional computer modeling? One way is to model known cities at various times in history, using historical records as sources of data. While such studies greatly enhance the understanding of the form and structure of specific cities at specific points in time, it is questionable whether such studies actually provide a true understanding of history. It can be argued that they do not because such studies only show a record of one of many possible courses of action at various moments in time. To gain a true understanding of urban history one has to place oneself back in historical time to consider all of the possible courses of action which were open in the light of the then current situation of the city, to act upon a possible course of action and to view the consequences in the physical form of the city. Only such an understanding of urban history can transcend the memory of the actual and hence the behavior of the possible. Moreover, only such an understanding can overcome the limitations of historical relativism, which contends that historical fact is of value only in historical context, with the realization, due to Benedetto Croce and echoed by Rudolf Bultmann, that the horizon of "'deeper understanding" lies in "'the actuality of decision"' (Seebohm and van Pelt 1990). One cannot conduct such studies on real cities except, perhaps, as a point of departure at some specific point in time to provide an initial layout for a city knowing that future forms derived by the studies will diverge from that recorded in history. An entirely imaginary city is therefore chosen. Although the components of this city at the level of individual buildings are taken from known cities in history, this choice does not preclude alternative forms of the city. To some degree, building types are invariants and, as argued in the Appendix, so are the urban typologies into which they may be grouped. In this imaginary city students of urban history play the role of citizens or groups of citizens. As they defend their interests and make concessions, while interacting with each other in their respective roles, they determine the nature of the city as it evolves through the major periods of Western urban history in the form of threedimensional computer models. My colleague R.J. van Pelt and I presented this approach to the study of urban history previously at ACADIA (Seebohm and van Pelt 1990). Yet we did not pay sufficient attention to the manner in which such urban models should be structured and how the efforts of the participants should be coordinated. In the following sections I therefore review what the requirements are for three-dimensional modeling to support studies in urban history as outlined both from the viewpoint of file structure of the models and other viewpoints which have bearing on this structure. Three alternative software schemes of progressively increasing complexity are then discussed with regard to their ability to satisfy these requirements. This comparative study of software alternatives and their corresponding file structures justifies the present choice of structure in relation to the simpler and better known generic alternatives which do not have the necessary flexibility for structuring the urban model. Such flexibility means, of course, that in the first instance the modeling software is more timeconsuming to learn than a simple point and click package in accord with the now established axiom that ease of learning software tools is inversely related to the functional power of the tools. (Smith 1987).
series	ACADIA
email
last changed	2022/06/07 07:56

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	849b
authors	Amiel, Maurice
year	1991
title	NOTES ON IN-SITU – FULL-SCALE EXPERIMENTATION AND THE DESIGN PROFESSIONS
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 40-43
summary	In the north american academic context a workshop is different from a paper session in that it is simply an opportunity to exchange ideas and to raise questions among colleagues who can bring to bear in their discussion various points of view and experiences otherwise unavailable.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	4d0d
authors	Angelil, Mark
year	1990
title	Experiments as Modus Operandi
source	Journal of Architectural Education. November, 1990. Vol. 44: pp. 37-48 : 9 p. of ill
summary	Architecture has for too long focused on the presentation of pristine objects and the presentation in drawing form. A critical understanding of the field, however, necessitates a reevaluation of the roles of the process involved in the production of building. Rather than emphasizing surface appearances, an architecture rooted in process aims ultimately at revealing the fundamental and deep structures inherent within the making of architecture. One of the primary tasks of the process is to provoke intuition and ingenuity - and the awareness that both are founded on knowledge - and that knowledge must be applied with imagination. The experiment presented here developed sequentially with a defined structure to the process of design, moving gradually from the abstract into the concrete, thereby attempting and understanding of what Roland Barthes identified as 'concrete abstraction.'
keywords	design process, architecture, knowledge, experimentation
series	CADline
last changed	1999/02/12 15:07

_id	e90b
authors	Arbab, Farhad
year	1990
title	Set Models and Boolean Operations for Solids and Assemblies
source	IEEE Computer Graphics and Applications November, 1990. vol. 10: pp. 76-86 : ill. includes bibliography.
summary	Application of solid modeling in computer-aided design, computer-aided manufacturing, and robotics often involve aggregates or assembling of disconnected pieces. This article presents an alternative CSG-like formalism based on open sets, in which both assemblies and connected pieces are modeled as points sets. Consequently, the same Boolean operations apply uniformly to connected pieces and assemblies
keywords	assemblies, CSG, solid modeling, boolean operations
series	CADline
last changed	1999/02/12 15:07

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	afa0
authors	Aziz, N.M., Bata, R. and Sudarshan, B.
year	1990
title	Bezier Surface : Surface Intersection
source	IEEE Computer Graphics and Applications. January, 1990. vol. 10: pp. 50-58
summary	In this article the authors explain the computational requirement and accuracy of two methods for finding the intersection of Bezier surfaces. In both methods, the existence of an intersection curve is confirmed by using the convex hull property of such surfaces. The first method evaluates the intersection by recursive subdivision of two patches with overlapping hulls. The second method detects a point on the intersection curve, then incrementally traces the intersection in the parametric spaces of the two surfaces. With both methods the intersection of a pair of first-order planar patches must be solved analytically. The intersection is approximated by first-order Bezier patches in the first case, and by planar triangles in the second. Overall, the method of incremental tracing gives more accurate results than the method of recursive subdivision
keywords	recursion, curves, convex hull, curved surfaces, intersection, Bezier, triangulation
series	CADline
last changed	2003/06/02 14:42

_id	969c
authors	Barnes, Thomas
year	1990
title	Dynamic Interaction of Solids as a Design Tool
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 29-40
doi	https://doi.org/10.52842/conf.acadia.1990.029
summary	Architectural form and order can sometimes be described as having dynamic characteristics. To capitalize on this notion, physical qualities (mass, velocity, material elasticity, and friction) are given to objects. The objects are set in motion and allowed to interact at will with each other and their environment. The physical qualities are the rules that govern the outcome of interactions. As a result, interactions can lead to affine transformations (translate, scale, rotate), reformations (topological editing), and/or deformations (geometrical editing) of the objects. The designer can investigate the effects of interaction between dynamic elements, vary their physical qualities, and evaluate the appropriateness of the outcome as a solution to the design problem.
series	ACADIA
last changed	2022/06/07 07:54

_id	84c3
authors	Blinn, James F.
year	1990
title	The Ultimate Design Tool
source	IEEE Computer Graphics and Applications. November, 1990. vol. 10: pp. 90-92
summary	Paper and pen(cil)? Some thoughts on the ultimate design tool
keywords	design, computer graphics, drafting
series	CADline
last changed	2003/06/02 10:24

_id	6a30
authors	Bonn, Markus
year	1989
title	Modeling Architectural Forms through Replacement Operations
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 103-130
doi	https://doi.org/10.52842/conf.acadia.1989.103
summary	Replacement operations, where an element at any topological level may be replaced by another element at the same or different topological level, are defined. Their potential as design tools which may be incorporated in a CAD system is investigated and demonstrated through the experimental implementation of two such operations in MARCOS, a Modeling Architectural Compositions System. MARCOS has been written in C. It is highly interactive and runs on an Apple Macintosh IIx. The two operations which have been implemented are the face -> volume and volume -> volume replacements. They were chosen for their potential as generators of architectural forms. Examples of architectural compositions produced through the use of replacement operations are also illustrated.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	64b2
authors	Brown, G. Z.
year	1990
title	Desirable Interface Characteristics of Knowledge-Based Energy Software Used by Architects
source	March, 1990. 14 p. : ill. includes bibliography
summary	This paper describes ongoing research projects on the development of user interfaces for energy software to be used by architects. The paper takes the position that the goal of knowledge-based design software should be to help the architect to visualize the unimagined. In order to approach this goal the unique characteristics of the architectural design process must be understood and used in the creation of software. The two characteristics discussed are: the architectural design process emphasizes synthesis rather than analysis, and the symbols used to transmit knowledge are primarily graphic abstractions rather than alpha-numeric abstractions
keywords	user interface, architecture, design process, knowledge base, software, energy
series	CADline
last changed	2003/06/02 13:58

_id	e1f9
authors	Carini, A., Apollonio, F. And Tolomellia, A.
year	1992
title	RESEARCH ACTIVITY 1990-92 AT THE L.T.N.-OIKOS BOLOGNA: EUROPAN AND BARRIER-FREE BATHROOMS
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 31-42
summary	During the three year period 1990-1992, the research activity carried out in the Typological Laboratory has been focused on two specific themes: flexibility and typological innovation in dwelling-areas and features of the bathroom for disabled users. These themes reflect two among the chief subjects calling the attention of the Residential Building Committee of the Ministry of Public Works to which - as everybody knows - the Laboratory is subordinated. Both themes have been approached through specific application pro rams which took as reference points, respectively, the Programm of EUROPAN Competitions and the proposals for bringing up to date.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	6266
authors	Carini, Alessandra
year	1991
title	REVIEW OF MOST RECENT ACTIVITIES OF THE "LABORATORIO TIPOLOGICO NAZIONALE"
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 20-22
summary	??{??'s activities did not start immediately after its opening since the following year was mainly given over to the definition of criteria and procedures for the management of the Laboratory itself by OIKOS. Actual research started in 1990 on the basis of a programme drawn up with the collaboration of the Public Housing Committee ('Comitato per I'Edilizia Residenziale").
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:24

_id	48fc
authors	Carrara, Gianfranco and Novembri, Gabriele
year	1990
title	Knowledge Assistant in the Process of Architectural Design
source	Building and Environment. 1990. 39 p. includes bibliography
summary	The article illustrates a methodological approach for the realization of a knowledge-based assistant for building and architectural design. The system is based on the concepts of constraint propagation, and uses the formal method of frames. The aim of the system is to cooperate 'interactively' with the designer in the various phases of this work
keywords	knowledge base, architecture, CAD, building, design, frames
series	CADline
last changed	2003/06/02 13:58

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	caadria2011_061
id	caadria2011_061
authors	Celani, Gabriela; José P. Duarte and Carlos V. Vaz
year	2011
title	The gardens revisited: The link between technology, meaning and logic?
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 643-652
doi	https://doi.org/10.52842/conf.caadria.2011.643
summary	The objective of this paper is to compare the computational concepts present in three books published by Mitchell between 1987 and 1990: The art of computer-graphics programming (1987), which has Robin Liggett and Thomas Kvan as co-authors, The logic of architecture (1990), probably his most influential work, and The poetics of gardens (1988), which has Charles Moore and William Turnbull as coauthors. By looking at the concepts that are presented in the three books and establishing a comparison between them, we expect to show that The poetics of Gardens should not be seen as a detour from Mitchell´s line of research, but rather as a key piece for understanding the relationship between technology, meaning and logic in his very coherent body of work.
keywords	Computational design concepts; technology; meaning; logic
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: