Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 221

Reformat results as: short short into frame detailed detailed into frame

_id	467d
authors	Eastman, Charles M.
year	1991
title	A Data Model Analysis of Modularity and Extensibility in Building Databases
source	February, 1991. Report No. 16: This paper uses data modeling techniques to define how database schemas for an intelligent integrated architectural CAD system can be made extensible. It reviews the product data modeling language EDM, then applies it to define a part of an architectural data model. Extensions are then investigated, regarding how users could integrate various design-specific packages into a uniquely configured system
summary	Both extension by substituting one technology for another and by adding a new evaluation application, are considered. Data modeling allows specification of a CAD database and identification of the kind of modularization that will work and what problems may arise
keywords	database, building, modeling, CAD, integration, systems, architecture, design
series	CADline
email
last changed	2003/05/17 10:15

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	0457
authors	Fereshetian, Nirva and Eastman, Charles M.
year	1991
title	A Comparison of Information Models for Product Design
source	Computer Integrated Future, CIB W78 Seminar. Calibre, The Netherlands: Eindhoven University of Technology, September, 1991. Unnumbered. includes bibliography
summary	This paper develops the data modeling requirements for modeling products, as required for the development of integrated databases in architecture and construction. These requirements are then applied to four data models: Entity- Relationship Model, NIAM, IDEF1x and EDM
keywords	building, modeling, integration, systems, database, construction
series	CADline
email
last changed	2003/05/17 10:15

_id	403a
authors	Karstila, K., Björk, B.C. and Hannus, M.
year	1991
title	A Conceptual Framework for Design and Construction Information
source	The Computer Integrated Future, CIB W78 Seminar. september, 1991. Unnumbered : ill. includes bibliography
summary	This paper tries to sketch out a conceptual framework model for design and construction information. This conceptual model is formed by extending the Finnish RATAS building product data model to include also construction activities, resources, costs, organizations, contracts, etc. and relationships between them. The overall conceptual framework model can be used to extract conceptual submodels related to the information needs of particular participants of the construction process. As an example of different views to design and construction information the views of design, cost estimating and production planning discussed in the paper. The framework model can also be used to define the position of traditional classification systems and general databases in the construction information process
keywords	construction, product modeling, building, information, design process
series	CADline
email
last changed	2003/06/02 14:41

_id	ecaade2023_281
id	ecaade2023_281
authors	Prokop, Šimon, Kubalík, Jiøí and Kurilla, Lukáš
year	2023
title	Neural Networks for Estimating Wind Pressure on Complex Double-Curved Facades
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 639–647
doi	https://doi.org/10.52842/conf.ecaade.2023.2.639
summary	Due to their complex geometry, it is challenging to assess wind effects on the freeform, double-curved building facades. The traditional building code EN 1991-1-4 (730035) only accounts for basic shapes such as cubes, spheres, and cylinders. Moreover, even though wind tunnel measurements are considered to be more precise than other methods, they are still limited by the number of measurement points that can be taken. This limitation, combined with the time and resources required for the analysis, can limit the ability to fully capture detailed wind effects on the whole complex freeform shape of the building. In this study, we propose the use of neural network models trained to predict wind pressure on complex double-curved facades. The neural network is a powerful data-driven machine learning technique that can, in theory, learn an approximation of any function from data, making it well-suited for this application. Our approach was empirically evaluated using a set of 31 points measured in the wind tunnel on a 3D printed model in 1:300 scale of the real architectural design of a concert hall in Ostrava. The results of this evaluation demonstrate the effectiveness of our neural network method in estimating wind pressures on complex freeform facades.
keywords	wind pressure, double-curved façade, neural network
series	eCAADe
email
last changed	2023/12/10 10:49

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	227a
authors	Bourdeau, L., Dubois, A.-M. and Poyet, P.
year	1991
title	A Common Data Model for Computer Integrated Building
source	computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : some ill. includes bibliography
summary	The connection of various building performance evaluation tools in a collaborative way is an essential request to develop true CAD systems. It is a basic requirement for the future of integrated information systems for building projects, where data concerning multiple aspects of the project can be exchanged during the different design steps. This paper deals with the on-going research concerning the generation of a common data model in the framework of a European collaborative action, the COMBINE Project, which is supported by the CEC, General Directorate XII for Research Science and Development, within the JOULE programme. The first step of the research concerns the progressive construction of a conceptual model and the paper focuses on the development of this Integrated Data Model (IDM). The paper reports on the definition of the architecture of the IDM. The main issues and the methodology of the IDM development are presented. The IDM development methodology is based on successive steps dealing with the identification of the data and context which are considered by the Design Tool Prototypes (DTP) to be connected through the IDM, the conceptual integration of this knowledge, and the implementation of the model on an appropriate software environment
keywords	standards, integration, communication, building, evaluation, modeling
series	CADline
last changed	2003/06/02 14:41

_id	cdb1
authors	Cornick, T., Noble, B. and Hallahan, C.
year	1991
title	The Limitations of Current Working Practices on the Development of Computer Integrating Modelling in Construction
source	computer Integrated Future, CIB W78 Seminar. Calibre, The Netherlands: Eindhoven University of Technology, september, 1991. Unnumbered. includes bibliography
summary	For the construction Industry to improve its processes through the application computer-based systems, traditional working practices must first change to support the integrated control of design and construction. Current manual methods of practice accept the limitations of man to process a wide range of building performance and production information simultaneously. However when these limitations are removed, through the applications of computer systems, the constraints of manual methods need no longer apply. The first generation of computer applications to the Construction Industry merely modelled the divided and sequential processes of manual methods i.e. drafting, specification writing, engineering and quantity calculations, estimating, billing, material ordering data-bases and activity planning. Use of these systems raises expectations that connections within the computer between the processes modelled can actually be made and faster and more integrated information processing be achieved. 'Linking' software is then developed. The end result of this approach was that users were able to produce information faster, present it in an impressive manner but, in reality, no perceived improvement in actual building performance, production economy or efficiency was realized. A current government sponsored Teaching Company Programme with a UK design and build company is addressing the problem of how real economic benefit can be realized through improvement in, amongst other things, their existing computer applications. This work is being carried out by both considering an academic conceptual model of how 'designing for production' can be achieved in computer applications and what is immediately realizable in practice by modelling the integration of a limited number of knowledge domains to which computers are already being applied. i.e. billing from design, estimating and buying. This paper describes each area of work and how they are impacting on each other
keywords	construction, building process, integration
series	CADline
last changed	2003/06/02 13:58

_id	a607
authors	Durisch, Peter and Anderheggen, Edoardo
year	1991
title	Leaving the Planar Universe
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 521-534
summary	A computer program is presented which generates realistic images of planned buildings embedded in their future environment through photomontage. The planar universe of conventional photomontaging is extended to three dimensions. During an interactive preprocessing step, a three- dimensional model of the building's environment is created: Geometrical data is retrieved photogrammetrically from a number of site photographs. Atmospheric parameters and the relative weights of the components of natural daylight are also retrieved from the photographs. The final image, combining the artificial model of the building and the photographs of its surroundings, is rendered by an extended ray-tracing algorithm in three-dimensional object space.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	869d
authors	Howard, Rob
year	1991
title	Building IT 2000 -- A Hypertext Database of Predictions on the Use of Information Technology in Building
source	The Computer Integrated Future, CIB W78 Seminar September, 1991. Unnumbered : ill.
summary	Hypertext is a medium particularly suitable for providing easy access to diverse information and maintaining it. It was used for a database of papers on the future of many aspects of information technology and their likely use by the year 2000. The recommendations include the development of project databases to integrate the use of computers by all parties to a building project, and the establishment of a building IT forum in the UK. CICA acted as research coordinator for the project and already carries out many of the functions of the building IT forum which will also need to include other organizations in the UK and in other countries. The data in Building IT 2000 will be maintained on hypertext and will take advantage of future developments in hypermedia. These new techniques, with the ability to provide selective access to, and payment for, digital data could help solve the problems of managing building project data. Building IT 2000 will be demonstrated at this conference to show its flexibility. It is available as a printed report or on disk for Macintosh or PC Windows 3.0 computers
keywords	hypertext, database, construction, building process, information, hypermedia
series	CADline
last changed	1999/02/12 15:08

_id	39e0
id	39e0
authors	Jablonski, Allen D.
year	1991
title	Integrated Component-based Computer Design Modeling System: The Implications of Control Parameters on the Design Process
source	New Jersey Institute of Technology, Newark, NJ Graduate Thesis - Master's Program College of Architecture
summary	The design process is dependent on a clear order of integrating and managing all of the control parameters that impact on a building's design. All component elements of a building must be defined by their: Physical and functional relations; Quantitative and calculable properties; Component and/or system functions. This requires a means of representation to depict a model of a building that can be viewed and interpreted by a variety of interested parties. These parties need different types of representation to address their individual control parameters, as each component instance has specific implications on all of the control parameters. Representations are prepared for periodic design review either manually through hand-drawn graphics and handcrafted models; or with the aid of computer aided design programs. Computer programs can profoundly increase the speed and accuracy of the process', as well as provide a level of integration, graphic representation and simulation, untenable through a manual process. By maintaining a single control model in an Integrated Component-based Computer Design Modeling System (ICCDMS), interested parties could access the design model at any point during the process. Each party could either: 1. Analyze individual components, or constraints of the model, for interferences against parameters within that party's control; or 2. Explore design alternatives to modify the model, and verify the integration of the components or functions, within the design model, as allowable in relation to other control parameters.
keywords	Architectural Design; Data Processing
series	thesis:MSc
type	extended abstract
email
more	http://www.library.njit.edu/etd/1990s/1990/njit-etd1990-005/njit-etd1990-005.html
last changed	2006/09/25 09:04

_id	2d77
authors	Korte, Michael
year	1991
title	CASOB - Simultaneous Surveying and Drawing
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.t7p
summary	Accurate planning and economical building within an existing structure require a complex building analysis based upon detailed scale plans. Work has shown unsatisfactory of measuring tools: (1.) Recording of measurements with meterrule and measuring tape often results in mistakes and wasted time. Since the data is not digitalized the measurements cannot be used by a CAD system. (2.) Commercially available CAD software is made only for new planning but not for planning with an existing structure. Up till now architects who predominantly work with existing structures were not able to take advantage of products in the software- and hardware market which would satisfy their needs. The problems already begin with the search for appropriate tools for the surveying of existing structures and the simplest possible transfer of the data to a CAD System. There is an increased demand for quality surveying of existing structures. In Germany, far more than 60 % of all construction planning is related to existing structures. Due to the special situation in the five new states this percentage will grow significantly. Other countries will find themselves in a similar situation. A large number of precise and analytical surveys of existing structures will be needed in a relative short time. Time pressure and stress factors at construction sites call for quality planning and economical construction which can only be accomplished with reliable and exact surveying of structures. Frustrating experiences in the field have led me to develop systems for the surveying of existing structures. With CASOB (Computer Aided Surveying of Buildings) we have a tool today that simultaneously surveys and creates a CAD compatible drawing.
series	eCAADe
last changed	2022/06/07 07:50

_id	a33e
authors	Linn, Gudrun
year	1991
title	BATHROOM DESIGN AND FUNCTION ANALYSIS - BRIEF REPORTS FROM TWO RESEARCH PROJECTS
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 38-39
summary	The problem behind this research project was the fact that Swedish standard bathrooms were (and most of them still are) difficult to clean, because of the building design. This has consequences not only for the inhabitants but also for the home helpers who assist old and disabled people in their own dwellings. The most difficult-to-clean spaces in a dwelling are the bathroom and the toilet-room. These spaces also are the most dirtied. In Sweden there of ten is a toilet in the bathroom. The aim of the project was to find out what or how much of physical agility a Swedish standard bathroom demands from the person who carries out the cleaning of it.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	8658
authors	Matas, Bellot
year	1991
title	BECOC : A Knowledge Bank and its Use in Construction and CAD Systems
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. include some bibliographical references
summary	The Development of the BECOC prototype (Structured Knowledge Bank for Construction Elements) was undertaken in order to test the integration of Data and Knowledge using the SITEC model (Construction Technology Information System). After the graphical definition of a building exterior, the assignment of the construction solutions is dynamically controlled using the Knowledge Bank for real time decision making. To represent the knowledge that acts on the data the knowledge bank consists of an Object Oriented Data Base and a Rule System, developed using the NEXPERT/OBJECT package. In this manner it is possible to establish relationships among properties, concepts, restrictions in values, structural relations and the control of standards compliance, which in this case has been limited to thermal, acoustic and weight requirements. The system helps the user to make decisions and it analyzes the context in order to make the deductions needed to maintain internal data consistency. The positive results of this work indicate the way for further developments, and demonstrate that expert systems and traditional technologies coupled together can be effective and give the desired answers in monitoring design in the everyday problems in construction technology
keywords	construction, expert systems, knowledge base, design, building, envelope, applications, integration, architecture
series	CADline
last changed	2003/06/02 13:58

_id	4196
authors	Pols, Albert A.J.
year	1991
title	Conceptual Modelling of Building Assemblies : Bridging the Gap Between Building Data and Design Integrity
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. includes bibliography
summary	Improved models and methods for building representation are needed for more effective support of design integrity checking and control. A 'generic' object-oriented approach to product modelling allows multiple design representations to be described as different views of a common, gradually evolving building product model. The product model provides the capability to generate, in successive design iterations, a coherent description of the form, structure and dimensions of the building and its assemblies and components. Associated technological and administrative data can be included in or associated with the product description
keywords	product modeling, building, database, semantics, integration
series	CADline
last changed	2003/06/02 13:58

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2c7b
authors	Stenvert, Ronald
year	1993
title	The Vector-drawing as a Means to Unravel Architectural Communication in the Past
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q9a
summary	Unlike in painting, in architecture one single person never controls the whole process between conception and realization of a building. Ideas of what the building will eventually look like, have to be conveyed from patron to the actual builders, by way of drawings. Generally the architect is the key-figure in this process of communication of visual ideas. Nowadays many architects design their new buildings by using computers and Computer-Aided (Architectural) Design programs like AutoCad and VersaCAD. Just like traditional drawings, all these computer drawings are in fact vector-drawings; a collection of geometrical primitives like lines, circle segments etc. identified by the coordinates of their end points. Vector-based computer programs can not only be used to design the future, but also as a means to unravel the architectural communication in the past. However, using the computer as an analyzing tool for a better comprehension of the past is not as simple as it seems. Historical data from the past are governed by unique features of date and place. The complexity of the past combined with the straightforwardness of the computer requires a pragmatic and basic approach in which the computer acts as a catalytic agent, enabling the scholar to arrive manually at his own - computer-assisted - conclusions. From this it turns out that only a limited number of projects of a morphological kind are suited to contribute to new knowledge, acquired by the close-reading of the information gained by way of meaningful abstraction. An important problem in this respect is how to obtain the right kind of architectural information. All four major elements of the building process - architect, design, drawing and realization - have their own different and gradually shifting interpretations in the past. This goes especially for the run-of-the-mill architecture which makes up the larger part of the historical urban environment. Starting with the architect, one has to realize that only a very limited part of mainstream architecture was designed by architects. In almost all other cases the role of the patron and the actual builder exceeds that of the architect, even to the extent that they designed buildings themselves. The position of design and drawing as means of communication also changed in the past. Until the middle of the nineteenth century drawings were not the chief means of communication between architects and builders, who got the gist of the design from a model, or, encountering problems, simply asked the architect or supervisor. From the nineteenth century onwards the use of drawings became more common, but almost never represented the building entirely "as built". In 1991 I published my Ph.D. thesis: Constructing the past: computerassisted architectural-historical research: the application of image-processing using the computer and Computer-Aided Design for the study of the urban environment, illustrated by the use of treatises in seventeenth-century architecture (Utrecht 1991). Here, a reconstruction of this historical communication process will be presented on the basis of a project studying the use of the Classical orders as prescribed in various architectural treatises, compared to the use of the orders in a specific group of still existing buildings in The Netherlands dating from the late sixteenth and entire seventeenth century. Comparisons were made by using vector-drawings. Both the illustrations in the the treatises and actual buildings were "translated" into computer-drawings and then analyzed.
series	eCAADe
last changed	2022/06/07 07:50

_id	2763
authors	Terai, Tatsuo
year	1991
title	Common Building Model for Administrative Checking System Against Building Design Proposals
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered
summary	Japanese local administrative authorities are running a joint project to develop a computer-oriented checking/confirmation system for lawfulness of building design proposals. They aim in the long run to establish a paper-less checking system which enables designers to efficiently utilize their project data derived directly from their own CAD systems. It will take much time to reach the goal, but this could be the first step to establish a national CAD standards from which is currently delayed by complicated characteristics of the AEC industry. This paper describes the outline of the system and explains briefly a proposed common building model based on standardized coding system as the results in the first stage of development
keywords	evaluation, standards, building, codes
series	CADline
last changed	1999/02/12 15:09

_id	80ce
authors	Turner, R., Balaguer, F., Gobbetti, E. and Thalmann, D.
year	1991
title	Interactive Scene Walkthrough Using a Physically-Based Virtual Camera
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 511-520
summary	One of the most powerful results of recent advances in graphics hardware is the ability of a computer user to interactively explore a virtual building or landscape. The newest threedimensional input devices, together with high speed 3D graphics workstations, make it possible to view and move through a 3D scene by interactively controlling the motion of a virtual camera. In this paper, we describe how natural and intuitive control of building walkthrough can be achieved by using a physically-based model of the virtual camera's behavior. Using the laws of classical mechanics to create an abstract physical model of the camera, we then simulate the virtual camera motion in real time in response toforce data from the various 3D input devices (e.g. the Spaceball and Polhemus 3Space Digitizer). The resulting interactive behavior of the model is determined by several physical parameters such as mass, moment of inertia, and various friction coefficients which can all be varied interactively, and by constraints on the camera's degrees of freedom. This allows us to explore a continuous range of physically-based metaphors for controlling the camera motion. We present the results of experiments using several of these metaphors for virtual camera motion and describe the effects of the various physical parameters.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	4133
authors	Van Nederveenm, G.A. and Tolman, F.P.
year	1991
title	Modelling Multiple Views on Buildings
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. includes a short bibliography
summary	The building practice is characterized by its loose organization of the different participants, each of whom performs a specific role in a building project and has a specific view on the building project data. When modelling building information it is useful to base the structure of a building model on these views. This can be done by the use of aspect models. This paper presents an approach in which aspect models are used to store view-specific information. The approach is illustrated with an outline of a building reference model. The building reference model consists of a general kernel and view-dependent aspect models. This model is first worked out for one decomposition level, the space unit level. After that the model is extended with other decomposition levels
keywords	product modeling, building, database, integration, construction, practice, management
series	CADline
last changed	2003/06/02 13:58

For more results click below: