Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 214

Reformat results as: short short into frame detailed detailed into frame

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	c12b
authors	Sakr, Yasser H. and Johnson, Robert E.
year	1991
title	Computer-Aided Architectural Design Strategies: One Size Does Not Fit All
doi	https://doi.org/10.52842/conf.acadia.1991.015
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 15-31
summary	The practice of architecture is in the midst of significant change and an increasingly uncertain future. Socio-economic factors external to the profession are forcing firms to develop new strategies for delivering design services. Overlaying these external changes is the uncertainty resulting from the inevitable introduction of information technology, which is only beginning to have an impact on the profession. Some advocates see the emergence of a new form of design firm -the computerized design firm - as an intelligent organization structured around electronic work groups with powerful computation and communications tools (Catalano 1990). On the other hand, many practitioners still see CADD as an expensive technology whose primary result leads to an increase in overhead costs. But some practitioners and researchers (Coyne, 1991) recognize both the potential and, problems that computer-aided design presents to the profession. This research presents a framework for understanding how changing information technology might be appropriately integrated into the design firm. It argues that design is an increasingly diverse enterprise, and that this diversity must be understood in order to effectively integrate information technology. The study is divided into three sections. The first section develops an overview of major social, economic, and structural changes within the profession. The second section discusses two alternative approaches that have been utilized to integrate information technology into firms. The third part presents a framework for understanding how information technology may have an impact on strategies for structuring and organizing architectural firms.
series	ACADIA
last changed	2022/06/07 07:56

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	227a
authors	Bourdeau, L., Dubois, A.-M. and Poyet, P.
year	1991
title	A Common Data Model for Computer Integrated Building
source	computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : some ill. includes bibliography
summary	The connection of various building performance evaluation tools in a collaborative way is an essential request to develop true CAD systems. It is a basic requirement for the future of integrated information systems for building projects, where data concerning multiple aspects of the project can be exchanged during the different design steps. This paper deals with the on-going research concerning the generation of a common data model in the framework of a European collaborative action, the COMBINE Project, which is supported by the CEC, General Directorate XII for Research Science and Development, within the JOULE programme. The first step of the research concerns the progressive construction of a conceptual model and the paper focuses on the development of this Integrated Data Model (IDM). The paper reports on the definition of the architecture of the IDM. The main issues and the methodology of the IDM development are presented. The IDM development methodology is based on successive steps dealing with the identification of the data and context which are considered by the Design Tool Prototypes (DTP) to be connected through the IDM, the conceptual integration of this knowledge, and the implementation of the model on an appropriate software environment
keywords	standards, integration, communication, building, evaluation, modeling
series	CADline
last changed	2003/06/02 14:41

_id	0aba
authors	Carrara, Gianfranco, Kalay, Yehuda E. and Novembri, Gabriele
year	1991
title	Intelligent Systems for Supporting Architectural Design
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 191-202
summary	Design can be considered a process leading to the definition of a physical form that achieves a certain predefined set of objectives. The process comprises three distinct operations: (1) definition of the desired set of performance criteria (design goals); (2) production of alternative design solutions; (3) evaluation of the expected performances of alternative design solutions, and comparing them to predefined criteria. Difficulties arise in performing each one of the three operations, as well as in combining them into a purposeful, unified process. First, it is difficult to define the desired performance criteria prior to and independently of, the search for an acceptable solution that achieves them, since many aspects of the desired criteria can only be discovered through the search for an acceptable solution. Furthermore, the search for such a solution may well alter the definition of these criteria, as new criteria and incompatibilities between existing criteria are discovered. Second the generation of a design solution is a task demanding creativity, judgement, and experience, all three of which are difficult to define, teach, and otherwise capture in some explicit manner. Third, it is difficult to evaluate the expected performances of alternative design solutions and to compare them to the predefined criteria. Design parameters interact with each other in complex ways, which cause effects and side effects. Predicting the expected performances of even primary effects involves extrapolating non-physical characteristics from the proposed solution's physical organization, a process which relies on a host of assumptions (physical, sociological, psychological, etc.) and hence is seldom a reliable measure. A fourth problem arises from the need to coordinate the three operations in an iterative process that will converge on an acceptable design solution in reasonable time. Computational techniques that were developed in the past to assist designers in performing the above mentioned activities have shown limitations and proved inadequate to a large degree. In this paper we discuss the work in progress aimed at developing an intelligent support system for building and architectural design, which will be able to play a decisive role in the definition, evaluation and putting into effect of the design choices.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss2006-hb-487
id	DDSS2006-HB-487
authors	Chien-Tung Chen and Teng-Wen Chang
year	2006
title	1:1 Spatially Augmented Reality Design Environment
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 487-499
summary	With the development of ubiquitous computing (Weiser, 1991), what will become of the traditional media such as pen and sketches, especially in the design education environment? Or what will they be transformed into? In this research, we focus on the interior design process with a particular type of media-1:1 spatially augmented reality design environment (SARDE). In this research, we tried to implement SARDE and have a scenario experiment to check how designers interact with such design media. Furthermore, through this research, we have come to know more about how designers use design media to represent their design dream.
keywords	Design & Decision Support Systems, Spatially Augmented Reality, Architecture Education, and Computer Visualization
series	DDSS
last changed	2006/08/29 12:55

_id	bd3b
id	bd3b
authors	Clayton, Mark J. and Weisenthal, Howard
year	1991
title	Enhancing the Sketchbook
doi	https://doi.org/10.52842/conf.acadia.1991.113
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 113-125
summary	The architect's sketchbook has been virtually untouched by the march of fashions and theories throughout history. The sketchbook, from its modem beginnings in guild lodge books through the travel journals of Beaux-Arts and Modern architects, has remained the repository for observations and ideas waiting to be synthesized into architecture. However, new opportunities offered by computing technology provide ways to advance the sketchbook, transforming it from a personal log of experiences slowly being buried under a lifetime of work, into a vital, interactive information environment supporting design activity. This is not to argue that the computer may replace the artist's hand and pencil, but that the computer can be used to organize and structure the artifacts of design activities Commonly embodied in sketches and notes.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	2f73
authors	Coad, P.and Yourdon, E.
year	1991
title	Object Oriented Analysis
source	2nd. edition, Englewood Cliffs, NJ., Yourdon Press/ Prentice Hall
summary	A step-by-step approach to: defining and communicating system requirements; understanding the application domain in which the user operates; integrating the data and process models; analyzing and specifying systems using self-contained partitioning; gaining leverage through explicit representation of commonality; applying a consistent underlying representation for analysis; and accommodating families of systems.
series	other
last changed	2003/04/23 15:14

_id	cdb1
authors	Cornick, T., Noble, B. and Hallahan, C.
year	1991
title	The Limitations of Current Working Practices on the Development of Computer Integrating Modelling in Construction
source	computer Integrated Future, CIB W78 Seminar. Calibre, The Netherlands: Eindhoven University of Technology, september, 1991. Unnumbered. includes bibliography
summary	For the construction Industry to improve its processes through the application computer-based systems, traditional working practices must first change to support the integrated control of design and construction. Current manual methods of practice accept the limitations of man to process a wide range of building performance and production information simultaneously. However when these limitations are removed, through the applications of computer systems, the constraints of manual methods need no longer apply. The first generation of computer applications to the Construction Industry merely modelled the divided and sequential processes of manual methods i.e. drafting, specification writing, engineering and quantity calculations, estimating, billing, material ordering data-bases and activity planning. Use of these systems raises expectations that connections within the computer between the processes modelled can actually be made and faster and more integrated information processing be achieved. 'Linking' software is then developed. The end result of this approach was that users were able to produce information faster, present it in an impressive manner but, in reality, no perceived improvement in actual building performance, production economy or efficiency was realized. A current government sponsored Teaching Company Programme with a UK design and build company is addressing the problem of how real economic benefit can be realized through improvement in, amongst other things, their existing computer applications. This work is being carried out by both considering an academic conceptual model of how 'designing for production' can be achieved in computer applications and what is immediately realizable in practice by modelling the integration of a limited number of knowledge domains to which computers are already being applied. i.e. billing from design, estimating and buying. This paper describes each area of work and how they are impacting on each other
keywords	construction, building process, integration
series	CADline
last changed	2003/06/02 13:58

_id	eb51
authors	Coyne, Richard
year	1996
title	CAAD, Curriculum and Controversy
doi	https://doi.org/10.52842/conf.ecaade.1996.121
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 121-130
summary	This paper brings some of the debate within educational theory to bear on CAAD teaching, outlining the contributions of conservatism, critical theory, radical hermeneutics and pragmatism. The paper concludes by recommending that CAAD teaching move away from conservative concepts of teaching, design and technology to integrate it into the studio. In a highly illuminating book on education theory, Shaun Gallagher (1991) outlines four current views on education that correspond to four major positions in contemporary social theory and philosophy. I will extend these categories to a consideration of attitudes to information technology, and the teaching of computing in architecture. These four positions are conservatism, critical theory, radical hermeneutics, and pragmatism. I will show how certain issues cluster around them, how each position provides the focus of various discursive practices, or intellectual conversations in contemporary thinking, and how information technology is caught up in those conversations. These four positions are not "cognitive styles," but vigorously argued domains of debate involving writers such as Gadamer, Habermas and Derrida about the theory of interpretation. The field of interpretation is known as hermeneutics, which is concerned less with epistemology and knowledge than with understanding. Interpretation theory applies to reading texts, interpreting the law, and appreciating art, but also to the application of any practical task, such as making art, drawing, defining and solving problems, and design (Coyne and Snodgrass, 1995). Hermeneutics provides a coherent focus for considering many contemporary issues and many domains of practice. I outline what these positions in education mean in terms of CAAD (computer-aided architectural design) in the curriculum.
series	eCAADe
email
more	http://www.caad.ac.uk/~richard
last changed	2022/06/07 07:56

_id	2e03
authors	Diederiks, H.J. and van Staveren, R.J.
year	1991
title	Dynamic Information System for Modelling of Design Processes
source	Computer Integrated Future, CIB W78 Seminar. september, 1991
summary	Unnumbered : ill. DINAMO is a Dynamic Information System for Modelling of Design Processes. It is intended for use along with product models, data management systems and existing applications. In DINAMO a programming user can define processes. These processes are represented by graphs. The graphs are characterized by nodes and relations between nodes. Each node in a graph represents a task, and each relation can be restricted to conditions. So the way in which a process is actually being performed, that is, the actual path to be evaluated through the graph, can depend on certain conditions. Processes and functions (=software modules) are available to the user as tasks. A consuming user can activate tasks; the DINAMO system regulates the dispatch of the tasks, conform the process and function definitions. Tasks are collected on sheets; sheets are collected in a task box. A task box can be regarded as a certain environment, determined by the programming user. A consuming user can choose between the environments which are available at that moment. With the DINAMO system software and process definitions can be re-used in a simple way
keywords	design process, modeling, graphs, information, relations, software
series	CADline
last changed	2003/06/02 13:58

_id	caadria2020_231
id	caadria2020_231
authors	Doe, Robert
year	2020
title	sensMOD - Computational Design through the lens of Henri Lefebvre's Spatial Theory
doi	https://doi.org/10.52842/conf.caadria.2020.1.701
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 701-710
summary	Spatial productivity is the first of the elements comprising sensMOD, a student elective that implemented a methodology addressing the exigent need of our time for transformation in the architecture, engineering and construction (AEC) sector. The second and third elements of sensMOD are parts and interaction which focus attention on the nature of complexity and connectivity in our networked world. The paper proposes a methodology that was used to guide the teaching of an elective for third year architecture students at a UK university. Its wider purpose is to contribute to discussion concerning the dysfunctional state of an AEC sector that needs to consider its productivity as projections of wider networks of resource and energy relationships. Henri Lefebvre's spatial theory (1991) guides the narrative and formulation of sensMOD.
keywords	computational design; spatial productivity; modularity; interaction design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	0faa
authors	Duelund Mortensen, Peder
year	1991
title	THE FULL-SCALE MODEL WORKSHOP
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 10-11
summary	The workshop is an institution, available for use by the public and established at the Laboratory of Housing in the Art Academy's school of Architecture for a 3 year trial period beginning April 1985. This resumé contains brief descriptions of a variety of representative model projects and an overview of all projects carried out so far, including the pilot projects from 1983 and planned projects to and including January 1987. The Full Scale Model Workshop builds full size models of buildings, rooms and parts of buildings. The purpose of the Full Scale Model Workshop is to promote communication among building's users. The workshop is a tool in an attempt to build bridges between theory and practice in research, experimentation and communication of research results. New ideas and experiments of various sorts can be tried out cheaply, quickly and efficiently through the building of full scale models. Changes can be done on the spot as a planned part of the project and on the basis of ideas and experiments achieved through the model work itself. Buildings and their space can thus be communicated directly to all involved persons, regardless of technical background or training in evaluation of building projects.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:23

_id	a607
authors	Durisch, Peter and Anderheggen, Edoardo
year	1991
title	Leaving the Planar Universe
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 521-534
summary	A computer program is presented which generates realistic images of planned buildings embedded in their future environment through photomontage. The planar universe of conventional photomontaging is extended to three dimensions. During an interactive preprocessing step, a three- dimensional model of the building's environment is created: Geometrical data is retrieved photogrammetrically from a number of site photographs. Atmospheric parameters and the relative weights of the components of natural daylight are also retrieved from the photographs. The final image, combining the artificial model of the building and the photographs of its surroundings, is rendered by an extended ray-tracing algorithm in three-dimensional object space.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	e949
authors	Eastman, Charles M.
year	1991
title	Modeling of Buildings : Evolution and Concepts
source	Computer Integrated Future, CIB W78 Seminar September, 1991. Unnumbered : ill. includes bibliography.
summary	This presentation reviews the concepts of building modeling as they evolved historically, through research and previous and current products. It points out some limitations of current systems and concepts and identifies some additional ones that will probably be integrated into an eventual production quality building model
keywords	building, modeling, architecture, design, CAD
series	CADline
email
last changed	2003/05/17 10:15

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ecaade2007_073
id	ecaade2007_073
authors	Francis, Sabu
year	2007
title	Web Based Collaborative Architectural Practice Using a Fractal System
doi	https://doi.org/10.52842/conf.ecaade.2007.727
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 727-734
summary	I have been working on an architecture representation system in India since 1991; that markedly deviates from the need of traditional drawings as we know. Over three million square feet of work has been done that took advantage of this system as it was being developed. The system has now matured sufficiently to be put into practice as a comprehensive architectural system of practice. It takes advantage of creation of just-in-time dynamic multi-organizations that can get formed (and dismantled) over the Internet on a project to project basis. The raison d’être of the representation system is that it would expose the “source-code” (metaphorically) of any work of architecture to stakeholders, much the same way as an open-source software project exposes the internal representation to fellow developers. I believe the design of architecture must go through an “open source” process in order to produce socially responsible designs. Such a stance is explained in this paper. The paper also explains the system in detail; its mathematical basis and justifies the need for such an approach. It also explores how a collaborative practice can be put into place using the system in the context of Internet technologies.
keywords	Collaborative practice, fractals, representation system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	46ce
id	46ce
authors	Gero, J. S.
year	1991
title	Ten problems for AI in design
source	Workshop on AI in Design, IJCAI-91, un-numbered
summary	Modern design research dates back to the end of the eighteenth century when French theorists attempted to describe design as a process. The notion of process in design dates back to the Roman engineer/architect/writer Vitruvius who described both process and performance aspects of designing. Since the 1940s there has been a variety of attempts to provide formal models of design ranging from prescriptive algorithmic-like descriptions through mathematical model and systems theoretic descriptions to the current paradigm based on the precepts and notions of artificial intelligence. All of these, including the current work, is primarily concerned with treating the process aspects of design.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:38

For more results click below: