Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 221

Reformat results as: short short into frame detailed detailed into frame

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	227a
authors	Bourdeau, L., Dubois, A.-M. and Poyet, P.
year	1991
title	A Common Data Model for Computer Integrated Building
source	computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : some ill. includes bibliography
summary	The connection of various building performance evaluation tools in a collaborative way is an essential request to develop true CAD systems. It is a basic requirement for the future of integrated information systems for building projects, where data concerning multiple aspects of the project can be exchanged during the different design steps. This paper deals with the on-going research concerning the generation of a common data model in the framework of a European collaborative action, the COMBINE Project, which is supported by the CEC, General Directorate XII for Research Science and Development, within the JOULE programme. The first step of the research concerns the progressive construction of a conceptual model and the paper focuses on the development of this Integrated Data Model (IDM). The paper reports on the definition of the architecture of the IDM. The main issues and the methodology of the IDM development are presented. The IDM development methodology is based on successive steps dealing with the identification of the data and context which are considered by the Design Tool Prototypes (DTP) to be connected through the IDM, the conceptual integration of this knowledge, and the implementation of the model on an appropriate software environment
keywords	standards, integration, communication, building, evaluation, modeling
series	CADline
last changed	2003/06/02 14:41

_id	85f9
authors	Brisson, E., Debras, P. and Poyet, Patrice
year	1991
title	A First Step Towards an Intelligent Integrated Design System in the Building Field
source	computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered pages : ill. includes bibliography
summary	This article presents the work the Knowledge Base Group is achieving towards the integration of Artificial Intelligence based facilities in the Building design process. After an overview of the current state of the integrated design process, the context and the technical guidelines to realize computer integrated software in the building design field is described. Then some tools are presented to model the knowledge (the HBDS method) and to implement such model in our Mips home-made knowledge modeling software platform (including object-oriented database management facilities, expert system reasoning facilities, hypertext edition facilities, 3D-design and 3D-view modules...). Finally the authors describe the Quakes application devoted to assess detached house anti-seismic capabilities during the design process. A deep conceptual model considers all the semantic entities (columns, resistant panels, openings, ...) involved in the anti-seismic expertise. Using both this conceptual model description of a detached house and the 3D design tool, they input the project. Then the seismic expertise is driven in a divide and conquer approach and records the alleged configuration recognized automatically linked to the corresponding section of the building regulation
keywords	AI, design, knowledge, software, integration, building, CAD, structures
series	CADline
last changed	2003/06/02 13:58

_id	0aba
authors	Carrara, Gianfranco, Kalay, Yehuda E. and Novembri, Gabriele
year	1991
title	Intelligent Systems for Supporting Architectural Design
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 191-202
summary	Design can be considered a process leading to the definition of a physical form that achieves a certain predefined set of objectives. The process comprises three distinct operations: (1) definition of the desired set of performance criteria (design goals); (2) production of alternative design solutions; (3) evaluation of the expected performances of alternative design solutions, and comparing them to predefined criteria. Difficulties arise in performing each one of the three operations, as well as in combining them into a purposeful, unified process. First, it is difficult to define the desired performance criteria prior to and independently of, the search for an acceptable solution that achieves them, since many aspects of the desired criteria can only be discovered through the search for an acceptable solution. Furthermore, the search for such a solution may well alter the definition of these criteria, as new criteria and incompatibilities between existing criteria are discovered. Second the generation of a design solution is a task demanding creativity, judgement, and experience, all three of which are difficult to define, teach, and otherwise capture in some explicit manner. Third, it is difficult to evaluate the expected performances of alternative design solutions and to compare them to the predefined criteria. Design parameters interact with each other in complex ways, which cause effects and side effects. Predicting the expected performances of even primary effects involves extrapolating non-physical characteristics from the proposed solution's physical organization, a process which relies on a host of assumptions (physical, sociological, psychological, etc.) and hence is seldom a reliable measure. A fourth problem arises from the need to coordinate the three operations in an iterative process that will converge on an acceptable design solution in reasonable time. Computational techniques that were developed in the past to assist designers in performing the above mentioned activities have shown limitations and proved inadequate to a large degree. In this paper we discuss the work in progress aimed at developing an intelligent support system for building and architectural design, which will be able to play a decisive role in the definition, evaluation and putting into effect of the design choices.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	403c
authors	Coyne, Richard
year	1991
title	The Impact of Computer Use on Design Practice
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 413-424
summary	This paper presents a critical review of the impact of computing on design practice. It presents an overview of - the impact as it relates to the intrusion of a highly technical resources into organizations. This involves a discussion of the changing nature of computing, the implications of training, management, and perceptions about the compatibility of computers and design. This leads to a consideration of less direct implications in terms of power structures, how computers influence the way we carry out intellectual tasks, the emphasis instilled by computers on form in design, and the influence of computers on attitudes of self worth.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	0faa
authors	Duelund Mortensen, Peder
year	1991
title	THE FULL-SCALE MODEL WORKSHOP
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 10-11
summary	The workshop is an institution, available for use by the public and established at the Laboratory of Housing in the Art Academy's school of Architecture for a 3 year trial period beginning April 1985. This resumé contains brief descriptions of a variety of representative model projects and an overview of all projects carried out so far, including the pilot projects from 1983 and planned projects to and including January 1987. The Full Scale Model Workshop builds full size models of buildings, rooms and parts of buildings. The purpose of the Full Scale Model Workshop is to promote communication among building's users. The workshop is a tool in an attempt to build bridges between theory and practice in research, experimentation and communication of research results. New ideas and experiments of various sorts can be tried out cheaply, quickly and efficiently through the building of full scale models. Changes can be done on the spot as a planned part of the project and on the basis of ideas and experiments achieved through the model work itself. Buildings and their space can thus be communicated directly to all involved persons, regardless of technical background or training in evaluation of building projects.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:23

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	c886
authors	Graham, Ian
year	1991
title	Object oriented methods
source	Addison Wesley
summary	This is another book aimed at helping those making decisions to arrive at better informed ones. This is a second (and substantially updated)edition of a book that was deservedly well reviewed when it was originally published. Those who have to give advice on the choice of any aspect of OO technology from design to programming and testing will know that they are faced with attempting to make decisions based on ill-informed and often biased sources of information. Ian Graham attempts to survey the whole field, laying out your choices for you rather than making them for you. In each aspect of the subject the result of reading Object-Oriented Methods will be to allow you to reach decisions based on an understanding of the problems and the current range of tools aimed at helping you solve them. If you have a serious decision to make this would be a good place to start before proceeding to a more detailed investigation of what seem the potentially best choices for you and your needs. The other group of people who will benefit from reading this book are those that want or need a general overview of the OO arena. This is a good text that should be read by students of Computing, those who recognise that good advice is based on a comprehensive knowledge of the field and those who have to make a practical commercial decision about which OO route to take.
series	other
last changed	2003/04/23 15:14

_id	43
authors	Horacio A. Torres. Lic. Geog. Cesira Morano. Guillermo Tella
year	1998
title	Utilización de un Sig Para la Formulacion de un Diagnostico Socioterritorial de la Ciudad de Buenos Aires (Use of a GIS for the Formulation of a Socio-territorial Diagnostic of the City of Buenos Aires)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 324-331
summary	The use of a GIS to assist the elaboration of a socioterritorial diagnosis of the City of Buenos Aires. This paper is based on the result of two research projects sponsored by the University of Buenos Aires (Project AR01 0 and Project Cl-94). From the beginning of 1998 onwards these results have been applied to the development of a "socio-territorial diagnosis" of the City of Buenos Aires, an applied research project funded by the Government of the City of Buenos Aires and carried out by the Facultad de Arquitectura, Diseho y Urbanismo, Universidad de Buenos Aires (Research Unit: PROHAB). The main goal of the analysis was the identification of the spatial distribution pattern of of the selected variables, directed to the delimitation of "social areas". The facilities provided by the GIS allowed us to perform this task in an exploratory manner. An analysis of the 3405 census tracts of the City of Buenos Aires (the central part of the agglomeration) is presented here. A great number of indices were constructed based on variables of the Argentine National Census of Population and Housing referred to housing conditions, housing type, provision of services, origin of the population, educational level, etc. This paper describes the various steps necessary for the application of a GIS, including the digitizing of the cartographic base and the statistical elaboration of the census information (provided by the INDEC in magnetic medium). A colour cartographic output that can be considered a first approximation of the "social map" of the city in 1991 is presented.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	e714
authors	Lawrence, Roderick J.
year	1991
title	SIMULATIONS OF ARCHITECTURAL PROJECTS: METHODS AND APPLICATIONS AT FULL-SCALE
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 53-64
summary	This paper briefly examines five interrelated themes concerning the use of full-scale simulation models in architectural projects, in the context of research and professional practice. First, the meaning of design is discussed. Second, a multi-functional interpretation of building performance is presented. Third, the main reasons for simulating design projects, in general, and for using full-scale models, in particular, are summarized. Then the antecedent or prerequisite conditions for public participation to occur effectively are discussed. Finally, an overview of the use of full-scale simulation models in European workshops enables us to table four ma n classes of functions for full-scale models.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	8658
authors	Matas, Bellot
year	1991
title	BECOC : A Knowledge Bank and its Use in Construction and CAD Systems
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. include some bibliographical references
summary	The Development of the BECOC prototype (Structured Knowledge Bank for Construction Elements) was undertaken in order to test the integration of Data and Knowledge using the SITEC model (Construction Technology Information System). After the graphical definition of a building exterior, the assignment of the construction solutions is dynamically controlled using the Knowledge Bank for real time decision making. To represent the knowledge that acts on the data the knowledge bank consists of an Object Oriented Data Base and a Rule System, developed using the NEXPERT/OBJECT package. In this manner it is possible to establish relationships among properties, concepts, restrictions in values, structural relations and the control of standards compliance, which in this case has been limited to thermal, acoustic and weight requirements. The system helps the user to make decisions and it analyzes the context in order to make the deductions needed to maintain internal data consistency. The positive results of this work indicate the way for further developments, and demonstrate that expert systems and traditional technologies coupled together can be effective and give the desired answers in monitoring design in the everyday problems in construction technology
keywords	construction, expert systems, knowledge base, design, building, envelope, applications, integration, architecture
series	CADline
last changed	2003/06/02 13:58

_id	29c2
authors	Ozel, Filiz
year	1991
title	An Intelligent Simulation Approach in Simulating Dynamic Processes in Architectural Environments
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 177-190
summary	The implications of object-oriented data models and rule-based reasoning systems is being researched in a wide variety of application areas ranging from VLSI circuit design (Afsannanesh et al 1990) to architectural environments (Coyne et al 1990). The potential of this approach in the development of discrete event simulations is also being scrutinized (Birtwistle et al 1986). Such computer models are usually called "expert simulations" or "intelligent simulations". Typically rule-basing in such models allows the definition of intelligent-objects that can reason about the simulated dynamic processes through an inferencing system. The major advantage of this approach over traditional simulation languages is its ability to provide direct reference to real world objects and processes. The simulation of dynamic processes in architectural environments poses an additional Problem of resolving the interaction of architectural objects with other objects such as humans, water, smoke etc., depending on the process simulated. Object-oriented approach promises potential in solving this specific problem. The first part of this paper addresses expert simulation approach within the context of architectural settings, then the second part summarizes work done in the application of such an approach to an emergency egress simulation.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	c12b
authors	Sakr, Yasser H. and Johnson, Robert E.
year	1991
title	Computer-Aided Architectural Design Strategies: One Size Does Not Fit All
doi	https://doi.org/10.52842/conf.acadia.1991.015
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 15-31
summary	The practice of architecture is in the midst of significant change and an increasingly uncertain future. Socio-economic factors external to the profession are forcing firms to develop new strategies for delivering design services. Overlaying these external changes is the uncertainty resulting from the inevitable introduction of information technology, which is only beginning to have an impact on the profession. Some advocates see the emergence of a new form of design firm -the computerized design firm - as an intelligent organization structured around electronic work groups with powerful computation and communications tools (Catalano 1990). On the other hand, many practitioners still see CADD as an expensive technology whose primary result leads to an increase in overhead costs. But some practitioners and researchers (Coyne, 1991) recognize both the potential and, problems that computer-aided design presents to the profession. This research presents a framework for understanding how changing information technology might be appropriately integrated into the design firm. It argues that design is an increasingly diverse enterprise, and that this diversity must be understood in order to effectively integrate information technology. The study is divided into three sections. The first section develops an overview of major social, economic, and structural changes within the profession. The second section discusses two alternative approaches that have been utilized to integrate information technology into firms. The third part presents a framework for understanding how information technology may have an impact on strategies for structuring and organizing architectural firms.
series	ACADIA
last changed	2022/06/07 07:56

_id	c5a8
authors	Schmitt, Gerhard N. (Ed.)
year	1991
title	CAAD Futures '91 [Conference Proceedings]
source	International Conference on Computer-Aided Architectural Design 1989/ ISBN 3-528-08821-4 / Zürich (Switzerland), July 1991, 594 p.
summary	Computer Aided Architectural Design (CAAD) is the art of design and computation. Since the establishment of the CAAD futures organization in 1985, experts meet every two years to explore the state-of-the-art and postulate on future development in Computer Aided Architectural Design. The fourth international CAAD futures conference took place in July 1991 in Zürich at the Swiss Federal Institute of Technology (ETH Zürich), organized by the Chair for CAAD. More than 220 participants from 25 countries attended the conference. Presentation topics were education, research, and application. The mission of CAAD futures '91 was to provide an international forum for the dissemination and discussion of future oriented developments and new experiences in the field of Computer Aided Architectural Design. This book is one result of the conference and is divided into three sections: Education, Research and Application. This international overview of the 1991 state-of-the- art in Computer Aided Architectural Design will serve as a reference for design teachers, researchers, and application developers interested in CAAD.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	9e10
authors	Tobin, Kenneth L.
year	1991
title	Constraint-Based Three-Dimensional Modeling as a Design Tool
doi	https://doi.org/10.52842/conf.acadia.1991.193
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 193-209
summary	Architectural design knowledge which may take the form of constraints and how it can be incorporated into the solid modeling process is explored and discussed. This theoretical exploration leads to an illustration of a Rinctional general purpose three-dimensional solid modeler which utilizes design knowledge as constraints upon the interactive solid modeling process. From this illustration, it is shown that the incorporation of constraints into ComputerAided Architectural Design can effectively assist in the early stages of the design process. A prototypical application is presented which provides an example in which the definition and implementation of specific design knowledge constrains or characterizes the generative and interactive behavior of user definable threedimensional entities. The basis of this work lies in the ability to create a design space, or building envelope, and to allow the interactive modeling of conceptual elements within, and constrained to, that design space, including the realistic interaction between the entities themselves.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	75e0
authors	Turoff, M.
year	1991
title	Computer-mediated communication requirements for group support
source	Journal of Organisational Computing 1, pp. 85-113
summary	This paper talks about the requirements of computer-mediated communication (CMC) for group support. An overview of CMC's historical evolution is presented. Advantages of CMC include opportunity for group to exhibit "collective intelligence", asynchronous support of communication process, self-tailoring of communication structures by users and groups, and the integration into the communication system of other computer resources and information systems. The main advantage of using CMC is in the very fundamental nature of the communication medium. The asynchronous approaches to group problem solving free individuals to deal with problems in those cognitive processes at which they excel. Seven asynchronous group process factors are also presented. A CMC metaphor is also presented. The metaphor components discussed are conferences, messages, activities and notifications. A conference can be tailored according to activities. An activity can be attached to any communication item. When triggered, it will execute a program or procedure in the local or remote host. Notification functions include alerting, closure and tracking. The concepts of roles, privileges, and tickets are also discussed. Finally, the components of two CMC systems are presented. These components include an object-oriented database, distributed user and group agents, a master virtual machine, and a SGML interface specification language.
series	journal paper
last changed	2003/04/23 15:14

_id	0d59
authors	Vaupel, Jesper
year	1991
title	Reference Architecture for Computer Integration in Denmark
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill
summary	This paper gives an overview of the principles and the existing integration framework for a new set of projects in Denmark, intended to develop a common reference architecture for the integration of design, construction, distribution and use of building products. The budget for these projects is 6 million dkr. The new projects are based upon existing reference architectures from previous projects - called 'DIGIDOK' (Digital building documents) and 'EITI' (Contractors Association IT-initiative) - which over the past 4 years have provided a set of generic application models, data models and EDIFACT specifications. The total budget was around 15 million dkr. New projects serve as a coordinating link and part of a greater IT-initiative 'data interchange in the construction sector' comprising 15-20 subprojects with a budget or around 30 million dkr
keywords	integration, systems, standards, research, building, construction
series	CADline
last changed	1999/02/12 15:09

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	849b
authors	Amiel, Maurice
year	1991
title	NOTES ON IN-SITU – FULL-SCALE EXPERIMENTATION AND THE DESIGN PROFESSIONS
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 40-43
summary	In the north american academic context a workshop is different from a paper session in that it is simply an opportunity to exchange ideas and to raise questions among colleagues who can bring to bear in their discussion various points of view and experiences otherwise unavailable.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

For more results click below: