Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 127

Reformat results as: short short into frame detailed detailed into frame

_id	a9bc
authors	Ronchi, Alfredo
year	1991
title	CAAD Technical Information Management by Hypertext
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.j4d
summary	The research of applications concerning design, sizing and building of computer models have been, during the last years, undoubtedly of great importance and interest. Therefore, analyzing in detail the graphic packages concerning drafting and solid modelling we can undoubtedly say that these are nowadays an integral part of our daily work. In the near future, we can of course expect from those applications, new studies and research mainly concerning an easier start up and the standardization of the graphic interface; if we analyze, for example the well known package AutoCAD we can consider a new real data-base and the redesign of the interface on a graphic base (graphic choice of drawings and blocks, icons for commands, better capability of text editing, pattern editing and stretching, loading capability and visualization of various drawings in graphic windows, full compatibility with MS WINDOWS, etc. etc.). As above mentioned, these studies work on updating well known existing applications aiming to consolidate their uses; one specific section of design not yet supported by computer application is that related to the management of technical and non-technical information, nowadays still written and stored on paper.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	4eed
authors	Benedickt, Michael (ed.)
year	1991
title	Cyberspace: First Steps
source	The MIT Press, Cambridge, MA and London, UK
summary	Cyberspace has been defined as "an infinite artificial world where humans navigate in information-based space" and as "the ultimate computer-human interface." These original contributions take up the philosophical basis for cyberspace in virtual realities, basic communications principles, ramifications of cyberspace for future workplaces, and more.
series	other
last changed	2003/04/23 15:14

_id	ea6b
authors	Boeve, Eddy
year	1991
title	Modelling Interaction Tools in the Views Architecture IV. Design Tools
source	First Moscow International HCI'91 Workshop Proceedings 1991 p.183
summary	Views is a user-interface system in which the user interface is a layer above applications, guaranteeing consistency of the interface, and with a data-layer implementing external object representations, allowing exchange of objects between applications without loss of structure. Although Views offers an architecture to deal with user-interface aspects on a high level, in this report is shown that also low level interaction can be modelled with the architecture provided.
series	other
last changed	2002/07/07 16:01

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	673a
authors	Fukuda, T., Nagahama, R. and Sasada, T.
year	1997
title	Networked Interactive 3-D design System for Collaboration
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 429-437
doi	https://doi.org/10.52842/conf.caadria.1997.429
summary	The concept of ODE (Open Design Environment) and corresponding system were presented in 1991. Then the new concept of NODE. which is networked version of ODE. was generated to make wide area collaboration in 1994. The aim of our research is to facilitate the collaboration among the various people involved in the design process of an urban or architectural project. This includes various designers and engineers, the client and the citizens who may be affected by such a project. With the new technologies of hyper medium, network, and component architecture, we have developed NODE system and applied in practical use of the collaboration among the various people. This study emphasizes the interactive 3-D design tool of NODE which is able to make realistic and realtime presentation with interactive interface. In recent years, ProjectFolder of NODE system, which is a case including documents, plans, and tools to proceed project., is created in the World Wide Web (WWW) and makes hyper links between a 3-D object and a text, an image. and other digital data.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	44c8
authors	Hacfoort, E.J.H.
year	1991
title	The COSMOS Building Design Tool
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.q9d
summary	This paper describes the development of a method to bring expert knowledge forward in the preliminary stage of the design process. We are focusing on the use of a graphic interface which makes it possible, in an easy and for a designer, familiar way, to state explicitly about the technical and economical impact of his design proposals. The first problem to overcome was to provide the designer with a design tool that combines the capability to reflect the geometry of the design and at the same time generate systematically, for computing and evaluation, a usable database. To fulfil this task we developed the program COSMOS, it receives the basic geometry of a design and produces a set of data which can be partly evaluated inside the program and furthermore function for design and computation in specialized programs. In this paper COSMOS is presented as the design tool developed so far and which we are now are introducing and testing in the education of building design and building physics at our faculty.
series	eCAADe
last changed	2022/06/07 07:50

_id	40aa
authors	Heinecke, Andreas M.
year	1991
title	Developing Recommendations for CAD User Interfaces Congress II: Design and Implementation of Interactive Systems: Standardization; Development of Standards
source	Proceedings of the Fourth InternationalConference on Human-Computer Interaction 1991 v.1 pp. 543-547
summary	The reference model for CAD systems developed by the Gesellschaft fur Informatik (GI -- the German membership organization of IFIP) is a frame for classifying the functionality of CAD systems. Whereas the reference model regards the user interface as one of several modules of the CAD system, the user interface appears to the user as being the whole system. This is the reason why an additional task working group on CAD user interfaces has been established by the GI in order to develop recommendations for the design of CAD user interfaces. Proceeding and preliminary results of the working group are described.
keywords	Design of User Interfaces; Guidelines; Standardization
series	other
last changed	2002/07/07 16:01

_id	diss_hensen
id	diss_hensen
authors	Hensen, J.L.M.
year	1991
title	On the Thermal Interaction of Building Structure and Heating and Ventilating System
source	Eindhoven University of Technology
summary	In this dissertation, developments in the field of building performance evaluation tools are described. The subject of these tools is the thermal interaction of building structure and heating and ventilating system. The employed technique is computer simulation of the integrated, dynamic system comprising the occupants, the building and its heating and ventilating system. With respect to buildings and the heating and ventilating systems which service them, the practical objective is ensuring thermal comfort while using an optimum amount of fuel. While defining the optimum had to be left for other workers, the issue of thermal comfort is addressed here. The conventional theory of thermal comfort in conditions characteristic for dwellings and offices assumes steady-state conditions. Yet thermal conditions in buildings are seldom steady, due to the thermal interaction between building structure, climate, occupancy, and auxiliary systems. A literature rewiew is presented regarding work on thermal comfort specifically undertaken to examine what fluctuations in indoor climate may be acceptable. From the results, assessment criteria are defined. Although its potentials reach beyond the area of Computer Aided Building Design, a description is given of building and plant energy simulation within the context of the CABD field of technology. Following an account of the present state-of-the-art, the choice for starting from an existing energy simulation environment (ESPR) is justified. The main development areas of this software platform - within the present context - are identified as: fluid flow simulation, plant simulation, and their integration with the building side of the overall problem domain. In the field of fluid flow simulation, a fluid flow network simulation module is described. The module is based on the mass balance approach, and may be operated either in standalone mode or from within the integrated building and plant energy simulation system. The program is capable of predicting pressures and mass flows in a user-defined building / plant network comprising nodes (ie building zones, plant components, etc) and connections (ie air leakages, fans, pipes, ducts, etc), when subjected to flow control (eg thermostatic valves) and / or to transient boundary conditions (eg due to wind). The modelling and simulation techniques employed to predict the dynamic behaviour of the heating and ventilating system, are elaborated. The simultaneous approach of the plant and its associated control is described. The present work involved extensions to the ESPR energy simulation environment with respect to robustness of the program, and with respect to additional plant simulation features, supported plant component models and control features. The coupling of fluid flow, plant side energy and mass, and building side energy simulation into one integrated program is described. It is this "modular-simultaneous" technique for the simulation of combined heat and fluid flow in a building / plant context, which enables an integral approach of the thermal interaction of building structure and heating and ventilating system. A multi stage verification and validation methodology is described, and its applicability to the present work is demonstrated by a number of examples addressing each successive step of the methodology. A number of imaginary and real world case studies are described to demonstrate application of the present work both in a modelling orientated context and in a building engineering context. Then the general conclusions of the present work are summarized. Next and finally, there are recommendations towards possible future work in the areas of: theory, user interface, software structure, application, and technology transfer.
series	thesis:PhD
last changed	2003/12/15 14:43

_id	8951
authors	Hix, Deborah and Schulman, Robert S.
year	1991
title	Human-Computer Interface Development Tools : A Methodology for Their Evaluation
source	Communications of the ACM. March, 1991. vol. 34: pp. 75-87 : tables. includes bibliography
summary	A comprehensive check-list-based methodology produces quantifyable criteria for evaluating and comparing human computer interface development tools along two dimensions: Functionality and Usability. An empirical evaluation shows that the methodology which is in use in several corporate interface development environments, produces reliable (consistent) results. This research provides a communication mechanism for tool researchers, tool practitioners, and tool users for making coherent critiques of their own and other tools. The authors goal was to provide a rigorous trusted methodology for evaluating human-computer interface development
keywords	tools, methodology, user interface, evaluation
series	CADline
last changed	2003/06/02 10:24

_id	a6d4
authors	Krueger, Myron W.
year	1991
title	Artificial Reality II
source	Reading, Massachusetts: Addison-Wesley Publishing. 2nd.ed.
summary	The focus of Myron Krueger in Artificial Reality II is the interaction between humans and machines, both in the immediate interface and the associated cultural relationships. He uses the concept of artificial reality as a medium of experience and as a tool to examine the relationships between people and machines. When he first coined the term in the mid-1970s, his 'goal was full-body participation in computer events that were so compelling that they would be accepted as real experience.' He wanted to create an artificial reality that would perceive human actions in a simulated world of sight, sounds, and other sensations and would make the experience of this illusion convincing. His focus was to create unencumbered, artificial realities where the humans could participate with their entire body without wearing any special instruments (be they sensors or displays) in an experience created by the computer. The environment could be controlled by preexisting programs, or could have operators intervene and use the computer to amplify their ability to interact with people. The intention was not to reproduce conventional reality but to create synthetic realities.
series	other
last changed	2003/04/23 15:14

_id	e7fb
authors	Leclercq, Pierre
year	1991
title	Students in Efficient Energy Management
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.e7o
summary	The LEMA presents Strategy II, the new version of his CAL software in thermal design of building. Based on his latest experiences using the first prototypes, the present programme provides an complete human interface and interesting tools for decision taking. A first educational experience with this software is described. Strategy II has been studied in 1990 by two twin teams: one is the LEMA (Laboratoire d'Etudes Méthodologiques Architecturales) and the other one is the CTE (Centre des Technologies de l'Education), parts of the University of Liège, in Belgium.
series	eCAADe
last changed	2022/06/07 07:50

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2914
authors	Mortola, Elena and Giangrande, Alessandro
year	1991
title	An Evaluation Module for "An Interface for Designing" (AID)- A Procedure based on Trichotomic Segmentation
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 139-154
summary	The paper illustrates a model used to construct the evaluation module for "An Interface for Designing" (AID), a system to aid architectural design. The model can be used at the end of every cycle of analysis-synthesis-evaluation in the intermediate phases of design development. With the aid of this model it is possible to evaluate the quality of a project in overall terms to establish whether the project is acceptable, whether it should be elaborated ex-novo or whether it is necessary to begin a new cycle to improve it. In this last case it is also possible to evaluate the effectiveness of the possible actions and strategies for improvement. T he model is based on a procedure of trichotomic segmentation, developed within the MCDA (Multi- Criteria Decision Aid), which uses the outranking relation to compare the project with some evaluation profiles taken as projects for reference. In the paper an example of the application of the model in the teaching field will also be described.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	1839
authors	Papamichael, Konstantinos Michael
year	1991
title	Design process and knowledge possibilities and limitations of computer-aided design
source	University of California, Berkeley
summary	An attempt to determine how computers can be used to assist designers resulted in the development of a design theory, according to which design is 'feeling and thinking while acting.' Design is theorized as living through one's imagination, however being continuously affected by real life itself. The design process is decomposed into elementary activities that are characterized with respect to the nature of knowledge requirements and the degree to which they can be specified and delegated to computers. The results are considered as criteria to determine possibilities and limitations of computer-aided design. An integration of a variety of computer applications tools is proposed towards the design and development of a computer-based Design Support Environment (DSE), that is applicable to any design domain. The proposed DSE automates all specifiable and delegable design activities, while assisting with the nondelegable ones through appropriate user interface. A DSE demonstration prototype is also presented in the Appendix. This prototype addresses the design of fenestration and electric lighting systems of office spaces with respect to comfort, energy and cost.
series	thesis:PhD
email
last changed	2003/02/24 20:32

_id	f14c
authors	Sariyildiz, Sevil
year	1991
title	Conceptual Design by Means of Islamic-Geometric-Patterns within a CAAD-Environment
source	Delft University of Technology
summary	The starting point in this research was to develop a 3D grammar theory on top of existing 2D Islamic-geometric-patterns, trying to rescue their fundamental geometry contents to be applied in contemporary architecture without compromising any architectural style. As it is self evident the architectural design process consists of clearly distinct stages namely conceptual design, materialisation and further completion. A this conceptual stage the innovative item of the research deals with pattern grammars on 3D complex geometrical patterns, considering them as polyhedra and polytopes, for their use as an underlayer to a concept design, like architects use 2D rectangular and triangular grids by the conventional way. Handling these complex 3D patterns requires a special environment which is possible with CAAD. Within the CAAD environment, the handling of these complex patterns is easily done by means of 3D tools, because the 3D tools permit the user to make any possible manipulations and geometrical transformations in an easier way in space. To a geometrical patterns, there is some attention paid during the last 50 years by some scholars. The most complex geometrical patterns are highly developed in Islamic architecture because it is forbidden in Muslim religion to use man's portraits or sculptures of human beings in the religious buildings. All these approaches to complex patterns are analysed and studied as 2D elements. The question was how could we consider them in 3rd dimensions and use them instead of 2D underlayer, as 3D underlayers in the conceptual phase of the CAAD design. Pattern grammar is a generally employable aid (underlying pattern) for conceptual and material designs. On the basis of rules of symmetry and substitution, ordering principles have been worked out, which can be used for formal design methods as well as detailing systems (e.g. modular coordination). Through the realization of a pattern grammar a wider range of underlying patterns can be offered and a choice from these can be made in a more fundamental manner. At a subsequent stage the collection of "empty boxes" can be filled with (architectural) elements in such a way that another option is created between either filling up the boxes completely, filling them partly, or filling them in such a way that they overflow. It is self-evident that underlying patterns can also be used for details and decoration in a design. Concerning the materialisation of the concept design, within the 3D CAAD environment, substitution methods are partially developed. Further theoretical developments concerning the materialisation phase constantly backed up through feed-back with specialist matters (such as e.g. by means of expert systems, decision-support systems), must be worked out. As feed-back of the research, the possibilities of the design with 3D patterns have been tested and the procedures are explained. () Working with 3D patterns gives a designer more inspirations to develop new ideas and new concepts and gives the opportunity to handle the complexity. () The formal, structural and symmetrical qualities of geometrical patterns has a positive influence on the industrialisation of the building components. (*) Working with 3D tools which are able to handle complex geometry have a result because of the accuracy of the information, that there has hardly been a mistake made during the preparation and the assembly of the building components. This has also positive results concerning the financial aspects of the building process.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	b5be
authors	Stok, Leon
year	1991
title	Architectural synthesis and optimization of digital systems
source	Eindhoven University of Technology
summary	High level synthesis means going from an functional specification of a digits-system at the algorithmic level to a register transfer level structure. Different appli-cations will ask for different design styles. Despite this diversity in design styles many tasks in the synthesis will be similar. There is no need to write a new synthesis system for each design style. The best way to go seems a decomposition of the high level synthesis problems in several well defined subproblems. How the problem is decomposed depends heavily on a) the type of network architecture chosen, b) the constraints applied to the design and c) on the functional description itself. From this architecture style, the constraints and the functional description a synthesis scheme can be derived.Once this scheme is fixed, algorithms can be chosen which fit into this scheme and solve the subproblems in a fast and, when possible, optimal way. To support such a synthesis philosophy, a framework is needed in which all design information can be stored in a unique way during the various phases of the design process. This asks for a design data base capable of handling all design information with a formally defined interface to all design tools. This thesis gives a formal way to describe both the functional representation, the register transfer level structure and the controller and the relations between all three of them. Special attention has been paid to the efficient representation of mutual exclusive operations and array accesses. The scheduling and allocation problems are defined as mappings between these formal representations. Both the existing synthesis algorithms and the new algorithms described in this thesis fit into this framework. Three new allocation algorithms are presented in this thesis: an algorithm for optimal register allocation in cyclic data flow graphs, an exact polynomial algorithm to do the module allocation and a new scheme to minimize the number of interconnections during all stages of the data path allocation. Cyclic data flow graphs result from high level behavioral descriptions that contain loops. Algorithms for register allocation in high level synthesis published up till now, only considered loop free data flow graphs, When these algorithms are applied to data flow graphs with loops, unnecessary register transfer operations are introduced. A new algorithm is presented that performs a minimal register allocation and eliminates all superfluous register transfer operations. The problem is reformulated as a multicommodity network flow problem for which very efficient solutions exist. Experiments on a benchmark set have shown that in all test cases all register transfers could be eliminated at no increase in register cost. Only heuristic algorithms appeared in literature to solve the module allocation problem. The module allocation problem is usually defined as a clique cover problem on a so-called module allocation graph. It is shown that, under certain conditions, the module allocation graph belongs to the special class of comparability graphs. A polynomial time algorithm can optimally find a clique cover of such a graph. Even when interconnect weights are taken into account, this can be solved exactly. This problem can be transformed into a maximal cost network flow problem, which can be solved exactly in polynomial time. An algorithm is described which solves the module allocation problem with interconnect weights exactly, with a complexity O(kn2), where n is the number of operations In previous research, interconnection was optimized when the module allocation for the operations and the register allocation for the variables already had been done. However, the amount of multiplexing and interconnect are crucial factors to both the delay and the area of a circuit. A new scheme is presented to minimize the number of interconnections during the data path allocation. This scheme first groups all values based on their read and write times. Values belonging to the same group can share a register file. This minimizes the number of data transfers with different sources and destinations. Secondly, registers are allocated for each group separately. Finally the interconnect allocation is done. During the interconnect allocation, the module allocation is determined. The value grouping is based on edge coloring algorithms providing a sharp upper bound on the number of colors needed two techniques: splitting read and write phases of values and introducing serial (re-)write operations for the same value, make that even more efficient exact edge coloring algorithms can be used. It is shown that when variables are grouped into register files and operations are assigned to modules during the interconnection minimization, significant savings (20%) can be obtained in the number of local interconnections and the amount of global interconnect, at the expense of only slightly more register area.
keywords	Digital Systems; Digital Systems
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	2005_391
id	2005_391
authors	Suneson, Kaj, Wernemyr, Claes, Westerdahl, Börje and Allwood, Carl Martin
year	2005
title	The Effect of Stereovision on the Experience of VR Models of the External Surroundings and the Interior of a Building
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 391-398
doi	https://doi.org/10.52842/conf.ecaade.2005.391
summary	Virtual reality offers considerable promise with regard to facilitating the building process. A good example is the facilitation of communication between architects and building companies, sellers and buyers or between community planners and the general public. It is often thought that in order to utilise the potential of VR in, for example, the above-mentioned contexts, it is necessary to use fully fledged versions of VR, including stereovision and the possibility of controlling the VR show. However, if a model can also be presented on less advanced equipment and still interpreted in a way that is useful to the viewer it will be possible to distribute the model simply and effectively. This would make it easier to create a more democratic urban planning process compared with if specialised equipment needed to be used and special shows needed to be arranged. In this study we compared the experience of two VR models (a large indoor exhibition hall and an outdoor street in Gothenburg, Sweden) when presented with and without stereovision. When the experience was measured using the Semantic Environmental Scale (the SMB scale, developed by Küller, 1975, 1991), questions on the experience of presence and six other questions on the experience of the models, the results only revealed one indication that stereovision made a difference. This indication was the result for the SMB factor Enclosedness. Suggestions are presented for future research in this area.
keywords	Design Process; Virtual Environments; Human-Computer Interaction; 3D City Modelling; Environmental Simulation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	75e0
authors	Turoff, M.
year	1991
title	Computer-mediated communication requirements for group support
source	Journal of Organisational Computing 1, pp. 85-113
summary	This paper talks about the requirements of computer-mediated communication (CMC) for group support. An overview of CMC's historical evolution is presented. Advantages of CMC include opportunity for group to exhibit "collective intelligence", asynchronous support of communication process, self-tailoring of communication structures by users and groups, and the integration into the communication system of other computer resources and information systems. The main advantage of using CMC is in the very fundamental nature of the communication medium. The asynchronous approaches to group problem solving free individuals to deal with problems in those cognitive processes at which they excel. Seven asynchronous group process factors are also presented. A CMC metaphor is also presented. The metaphor components discussed are conferences, messages, activities and notifications. A conference can be tailored according to activities. An activity can be attached to any communication item. When triggered, it will execute a program or procedure in the local or remote host. Notification functions include alerting, closure and tracking. The concepts of roles, privileges, and tickets are also discussed. Finally, the components of two CMC systems are presented. These components include an object-oriented database, distributed user and group agents, a master virtual machine, and a SGML interface specification language.
series	journal paper
last changed	2003/04/23 15:14

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
doi	https://doi.org/10.52842/conf.ecaade.1999.169
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: