Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 214

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	eb51
authors	Coyne, Richard
year	1996
title	CAAD, Curriculum and Controversy
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 121-130
doi	https://doi.org/10.52842/conf.ecaade.1996.121
summary	This paper brings some of the debate within educational theory to bear on CAAD teaching, outlining the contributions of conservatism, critical theory, radical hermeneutics and pragmatism. The paper concludes by recommending that CAAD teaching move away from conservative concepts of teaching, design and technology to integrate it into the studio. In a highly illuminating book on education theory, Shaun Gallagher (1991) outlines four current views on education that correspond to four major positions in contemporary social theory and philosophy. I will extend these categories to a consideration of attitudes to information technology, and the teaching of computing in architecture. These four positions are conservatism, critical theory, radical hermeneutics, and pragmatism. I will show how certain issues cluster around them, how each position provides the focus of various discursive practices, or intellectual conversations in contemporary thinking, and how information technology is caught up in those conversations. These four positions are not "cognitive styles," but vigorously argued domains of debate involving writers such as Gadamer, Habermas and Derrida about the theory of interpretation. The field of interpretation is known as hermeneutics, which is concerned less with epistemology and knowledge than with understanding. Interpretation theory applies to reading texts, interpreting the law, and appreciating art, but also to the application of any practical task, such as making art, drawing, defining and solving problems, and design (Coyne and Snodgrass, 1995). Hermeneutics provides a coherent focus for considering many contemporary issues and many domains of practice. I outline what these positions in education mean in terms of CAAD (computer-aided architectural design) in the curriculum.
series	eCAADe
email
more	http://www.caad.ac.uk/~richard
last changed	2022/06/07 07:56

_id	f14c
authors	Sariyildiz, Sevil
year	1991
title	Conceptual Design by Means of Islamic-Geometric-Patterns within a CAAD-Environment
source	Delft University of Technology
summary	The starting point in this research was to develop a 3D grammar theory on top of existing 2D Islamic-geometric-patterns, trying to rescue their fundamental geometry contents to be applied in contemporary architecture without compromising any architectural style. As it is self evident the architectural design process consists of clearly distinct stages namely conceptual design, materialisation and further completion. A this conceptual stage the innovative item of the research deals with pattern grammars on 3D complex geometrical patterns, considering them as polyhedra and polytopes, for their use as an underlayer to a concept design, like architects use 2D rectangular and triangular grids by the conventional way. Handling these complex 3D patterns requires a special environment which is possible with CAAD. Within the CAAD environment, the handling of these complex patterns is easily done by means of 3D tools, because the 3D tools permit the user to make any possible manipulations and geometrical transformations in an easier way in space. To a geometrical patterns, there is some attention paid during the last 50 years by some scholars. The most complex geometrical patterns are highly developed in Islamic architecture because it is forbidden in Muslim religion to use man's portraits or sculptures of human beings in the religious buildings. All these approaches to complex patterns are analysed and studied as 2D elements. The question was how could we consider them in 3rd dimensions and use them instead of 2D underlayer, as 3D underlayers in the conceptual phase of the CAAD design. Pattern grammar is a generally employable aid (underlying pattern) for conceptual and material designs. On the basis of rules of symmetry and substitution, ordering principles have been worked out, which can be used for formal design methods as well as detailing systems (e.g. modular coordination). Through the realization of a pattern grammar a wider range of underlying patterns can be offered and a choice from these can be made in a more fundamental manner. At a subsequent stage the collection of "empty boxes" can be filled with (architectural) elements in such a way that another option is created between either filling up the boxes completely, filling them partly, or filling them in such a way that they overflow. It is self-evident that underlying patterns can also be used for details and decoration in a design. Concerning the materialisation of the concept design, within the 3D CAAD environment, substitution methods are partially developed. Further theoretical developments concerning the materialisation phase constantly backed up through feed-back with specialist matters (such as e.g. by means of expert systems, decision-support systems), must be worked out. As feed-back of the research, the possibilities of the design with 3D patterns have been tested and the procedures are explained. () Working with 3D patterns gives a designer more inspirations to develop new ideas and new concepts and gives the opportunity to handle the complexity. () The formal, structural and symmetrical qualities of geometrical patterns has a positive influence on the industrialisation of the building components. (*) Working with 3D tools which are able to handle complex geometry have a result because of the accuracy of the information, that there has hardly been a mistake made during the preparation and the assembly of the building components. This has also positive results concerning the financial aspects of the building process.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	0b1c
authors	Bridges, Alan
year	1991
title	Computer Exercises in Architectural Design Theory
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.f9w
summary	This paper discusses how architectural theory may be taught using computer based exercises to explore the practical application of those theories. The particular view of architecture developed is, necessarily, a restricted one but the objectives behind the exercises are slightly different to those that a pure architectural theorist or historian might have The formal teaching of architectural theory and composition has not been very fashionable in Schools of Architecture for several years now: indeed there is a considerable inbuilt resistance in students to the application of any form of rules or procedures. There is however a general interest in computing and this can be utilised to advantage. In concentrating on computer applications in design eclectic use has been made of a number of architectural examples ranging from Greek temples to the work of modern deconstructionists. Architectural theory since Vitruvius is littered with attempts to define universal theories of design and this paper certainly does not presume to anything so grand: I have merely looked at buildings, compared them and noted what they have in common and how that might relate to computer-aided design. I have ignored completely any sociological, philosophical or phenomenological questions but would readily agree with the criticism that Cartesian rationality is not, on its own, a sufficient base upon which to build a theory of design. However I believe there is merit in articulating design by separating it from other concerns and making it a subject of study in its own right. Work in design research will provide the models and intellectual structures to facilitate discourse about design and might be expected to benefit the development of design skills by providing material that could be formally taught and debated in a way that is removed from the ephemeral "fashionable designer" debate. Of course, some of the ideas discussed here may prove to be equally ephemeral but that does not entirely negate their value.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ac81
authors	Brown, A.G.P.
year	1991
title	Review of Building IT 2000
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.q2c
summary	Building IT2000 is a Building and Information Technology database which is presented in Hypertextformat. Its production has been co-ordinated by the CICA (the Construction Industry Computer Association), an independent association serving the needs of computer users, specifiers and suppliers in the Construction Industry. The stack is a collection of structured information prepared by a group of experts in computing and the construction industry. As such it represents an interesting advance from two points of view: (1.) It is a valuable source of information in its own right. It could provide a resource for students of architecture which could be used as a self-teaching package. (2.) It points a possible way forward for the development of similar hypertext based teaching packages which could be developed by academics within the European teaching community.
series	eCAADe
email
more	http://www.mediatecture.at/ecaade/91/brown.pdf
last changed	2022/06/07 07:50

_id	0faa
authors	Duelund Mortensen, Peder
year	1991
title	THE FULL-SCALE MODEL WORKSHOP
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 10-11
summary	The workshop is an institution, available for use by the public and established at the Laboratory of Housing in the Art Academy's school of Architecture for a 3 year trial period beginning April 1985. This resumé contains brief descriptions of a variety of representative model projects and an overview of all projects carried out so far, including the pilot projects from 1983 and planned projects to and including January 1987. The Full Scale Model Workshop builds full size models of buildings, rooms and parts of buildings. The purpose of the Full Scale Model Workshop is to promote communication among building's users. The workshop is a tool in an attempt to build bridges between theory and practice in research, experimentation and communication of research results. New ideas and experiments of various sorts can be tried out cheaply, quickly and efficiently through the building of full scale models. Changes can be done on the spot as a planned part of the project and on the basis of ideas and experiments achieved through the model work itself. Buildings and their space can thus be communicated directly to all involved persons, regardless of technical background or training in evaluation of building projects.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:23

_id	ecaade2007_073
id	ecaade2007_073
authors	Francis, Sabu
year	2007
title	Web Based Collaborative Architectural Practice Using a Fractal System
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 727-734
doi	https://doi.org/10.52842/conf.ecaade.2007.727
summary	I have been working on an architecture representation system in India since 1991; that markedly deviates from the need of traditional drawings as we know. Over three million square feet of work has been done that took advantage of this system as it was being developed. The system has now matured sufficiently to be put into practice as a comprehensive architectural system of practice. It takes advantage of creation of just-in-time dynamic multi-organizations that can get formed (and dismantled) over the Internet on a project to project basis. The raison d’être of the representation system is that it would expose the “source-code” (metaphorically) of any work of architecture to stakeholders, much the same way as an open-source software project exposes the internal representation to fellow developers. I believe the design of architecture must go through an “open source” process in order to produce socially responsible designs. Such a stance is explained in this paper. The paper also explains the system in detail; its mathematical basis and justifies the need for such an approach. It also explores how a collaborative practice can be put into place using the system in the context of Internet technologies.
keywords	Collaborative practice, fractals, representation system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	fd70
authors	Goldman, Glenn and Zdepski, Michael Stephen (Eds.)
year	1991
title	Reality and Virtual Reality [Conference Proceedings]
source	ACADIA Conference Proceedings / ISBN 1-880250-00-4 / Los Angeles (California - USA) October 1991, 236 p.
doi	https://doi.org/10.52842/conf.acadia.1991
summary	During the past ten years computers in architecture have evolved from machines used for analytic and numeric calculation, to machines used for generating dynamic images, permitting the creation of photorealistic renderings, and now, in a preliminary way, permitting the simulation of virtual environments. Digital systems have evolved from increasing the speed of human operations, to providing entirely new means for creating, viewing and analyzing data. The following essays illustrate the growing spectrum of computer applications in architecture. They discuss developments in the simulation of future environments on the luminous screen and in virtual space. They investigate new methods and theories for the generation of architectural color, texture, and form. Authors address the complex technical issues of "intelligent" models and their associated analytic contents. There are attempts to categorize and make accessible architects' perceptions of various models of "reality". Much of what is presented foreshadows changes that are taking place in the areas of design theory, building sciences, architectural graphics, and computer research. The work presented is both developmental, evolving from the work done before or in other fields, and unique, exploring new themes and concepts. The application of computer technology to the practice of architecture has had a cross disciplinary effect, as computer algorithms used to generate the "unreal" environments and actors of the motion picture industry are applied to the prediction of buildings and urban landscapes not yet in existence. Buildings and places from history are archeologically "re-constructed" providing digital simulations that enable designers to study that which has previously (or never) existed. Applications of concepts from scientific visualization suggest new methods for understanding the highly interrelated aspects of the architectural sciences: structural systems, environmental control systems, building economics, etc. Simulation systems from the aerospace industry and computer media fields propose new non-physical three-dimensional worlds. Video compositing technology from the television industry and the practice of medicine are now applied to the compositing of existing environments with proposed buildings. Whether based in architectural research or practice, many authors continue to question the development of contemporary computer systems. They seek new interfaces between human and machine, new methods for simulating architectural information digitally, and new ways of conceptualizing the process of architectural design. While the practice of architecture has, of necessity, been primarily concerned with increasing productivity - and automation for improved efficiency, it is clear that university based studies and research continue to go beyond the electronic replication of manual tasks and study issues that can change the processes of architectural design - and ultimately perhaps, the products.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	c12b
authors	Sakr, Yasser H. and Johnson, Robert E.
year	1991
title	Computer-Aided Architectural Design Strategies: One Size Does Not Fit All
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 15-31
doi	https://doi.org/10.52842/conf.acadia.1991.015
summary	The practice of architecture is in the midst of significant change and an increasingly uncertain future. Socio-economic factors external to the profession are forcing firms to develop new strategies for delivering design services. Overlaying these external changes is the uncertainty resulting from the inevitable introduction of information technology, which is only beginning to have an impact on the profession. Some advocates see the emergence of a new form of design firm -the computerized design firm - as an intelligent organization structured around electronic work groups with powerful computation and communications tools (Catalano 1990). On the other hand, many practitioners still see CADD as an expensive technology whose primary result leads to an increase in overhead costs. But some practitioners and researchers (Coyne, 1991) recognize both the potential and, problems that computer-aided design presents to the profession. This research presents a framework for understanding how changing information technology might be appropriately integrated into the design firm. It argues that design is an increasingly diverse enterprise, and that this diversity must be understood in order to effectively integrate information technology. The study is divided into three sections. The first section develops an overview of major social, economic, and structural changes within the profession. The second section discusses two alternative approaches that have been utilized to integrate information technology into firms. The third part presents a framework for understanding how information technology may have an impact on strategies for structuring and organizing architectural firms.
series	ACADIA
last changed	2022/06/07 07:56

_id	86c7
authors	Schallhammer, J. and Wenz, F.
year	1991
title	Workshop Report: From CAD Graphics to an Art Exhibition
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.f4k
summary	The results that will be outlined have been reached at the University of Munich, Faculty of Architecture, Institute for Structural Analysis of Buildings. It started in September 1990 when a group of students decided to focus on questions raised by CAD generated renderings and plots. At that point it seemed to be obvious that CAD systems were about to fundamentally change architectural representation as we know it, which relies heavily on formal, visual and aesthetic qualities, and was developed over hundreds of years. At the same time computers are creating new realities as in high-resolution realistic renderings, animation or virtual reality systems. It was necessary to explore the resulting new techniques and possibilities while applying them to architectural projects.
series	eCAADe
last changed	2022/06/07 07:50

_id	6be2
authors	Schmitt, Gerhard N. and Oechslin, Werner
year	1991
title	Computer Aided Architectural Design Futures
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 9-16
summary	Computing has become a recognized art in the discipline of architecture, moving from the periphery towards the core of the design process. Research, education, and application are the critical areas that provide the development platforms for the future of design and computing. Seen in perspective, the term lineamenta describes related activities in historical architectural research. Research also shaped the origins and early directions of CAAD. The first applications emerged after computers and software were powerful enough to implement high level ideas. Meaningful education of a wider audience of designers only became possible after the results of research proved promising.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	58cd
authors	Schnoedt, Heinrich
year	1991
title	Cultural Parametrics
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 223-234
doi	https://doi.org/10.52842/conf.acadia.1991.223
summary	The human desire for automation of repetitive processes offers opportunities for the employment of binary computing for these procedures. Architecture and the design of buildings is no exception. With an increase in industrial prefabrication of moderately variable building components, the focus of the practising architect shifts from the individual design process toward a selection process of parts or components with a defined parametric extent. While this concept of parameterized parts has been used by architects since the first repetitive part was available, the advent of modern CAAD systems, with a growing number of parametric components and parts already integrated, is likely to greatly amplify the impact of predefined parts on buildings. Both industry and research institutions continue to make a great effort to utilize building codes and organizational structures as the basis to develop sophisticated algorithms of rule based design. Their purpose of the parameterization of parts or concepts is twofold: to reduce the time frame of human labor on the design of pieces and concepts which are considered repetitive,. and, to install a control mechanism to eliminate mistakes which lay outside of the parametric framework. The implementation of these algorithms in architectural practice and in the educational environment suggests consequences on many levels. In the following, an attempt is made to cast some light on the history of parametrics in respect to computing and the problems associated with a predominantly numerically encoded parametric approach.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	040e
authors	Simovic, Dejan
year	1991
title	URBIS: A Tool for City-Planners
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.q8l
summary	URBIS is a computer program built for AutoCAD environment (AutoLisp) which purpose is to help in urban planning's education and practice. Motives for program creation are: (1) Needs of education at the Faculty of Architecture of the Belgrade University. (2) Exploring the AutoCAD's capabilities in managing urban planning data bases. (3) Providing a tool for creation and manipulation of urban environment computer model. (4) Making a base for knowledge based system creation. (5) Computer based evaluation of the results of the competition "Future of New Belgrade". // The program consists of: (1) Module for model creation. (2) Module for model manipulation - remodeling. (3) Module for obtaining data from the model. // Some commands and procedures from these three modules are organized as ARCHIGAME module - a kind of game for architects. The computer model of New Belgrade was created using this program, and three remodelations were done on the model, as the test-examples.
series	eCAADe
last changed	2022/06/07 07:50

_id	82a2
authors	Streich, Bernd
year	1991
title	The Conception of Education in CAD
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.p4b
summary	In February 1990 the University of Kaiserslautern founded the new teaching and research department "Computer-Aided Design and Construction in Environmental Planning and Architecture". Unlike other German universities, the speciality of the new teaching department is in the common education of architects and environmental planners (including urban planning), so that a wide range of computer systems is at their disposal: computer-aided architectural design systems just as geographic information systems, picture processing or information systems to support urban planning etc. No other German university disposes of this kind of common education in a single teaching department. The following aspects will be discussed: (-) The general concept of education in three dimensions, viz. a dimension of application concerning architecture and urban planning, a dimension of technical features concerning computer applications and a dimension of critical judgement. (-) Contents of education and teaching concept including examples and students' resonance. (-) Research fields in urban planning and architecture which are necessary for a practical-oriented education concept. (-) Experience with the educational background furnished by the students of architecture and environmental planning and general consequences for the teaching concept.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	a620
authors	Asanowicz, Alexander
year	1991
title	Unde et Quo
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.t1s
summary	To begin with, I would like to say a few words about the problem of alienation of modern technologies which we also inevitably faced while starting teaching CAD at our department. Quite often nowadays a technology becomes a fetish as a result of lack of clear goals in human mind. There are multiple technologies without sense of purpose which turned into pure experiments. There is always the danger of losing purposeness and drifting toward alienation. The cause of the danger lies in forgetting about original goals while mastering and developing the technology. Eventually the original idea is ignored and a great gap appears between technical factors and creativity. We had the danger of alienation in mind when preparing the CAAD curriculum. Trying to avoid the tension between technical and creative elements we agreed not to introduce CAD too soon then the fourth year of studies and continue it for two semesters. One thing was clear - we should not teach the technique of CAD but how to design using a computer as a medium. Then we specified projects. The first was called "The bathroom I dream of" and meant to be a 2D drawing. The four introductory meetings were in fact teaching foundations of DOS, then a specific design followed with the help of AutoCAD program. In the IX semester, for example, it was "A family house" (plans, facades, perspective). "I have to follow them - I am their leader" said L.J. Peter in "The Peter's Prescription". This quotation reflects exactly the situation we find ourselves in teaching CAAD at our department. It means that ever growing students interest in CAAD made us introduce changes in the curriculum. According to the popular saying, "The more one gets the more one wants", so did we and the students feel after the first semester of teaching CAD. From autumn 1991 CAAD classes will be carried from the third year of studying for two consecutive years. But before further planning one major steep had to be done - we decided to reverse the typical of the seventies approach to the problem when teaching programming languages preceded practical goals hence discouraging many learners.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2560
authors	Alkhoven, Patricia
year	1991
title	The Reconstruction of the Past: The Application of New Techniques for Visualization and Research in Architectural History
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 549-566
summary	This paper focuses on the visualization of historical architecture. The application of new Computer-Aided- Architectural-Design techniques for visualization on micro computers provides a technique for reconstructing and analyzing architectural objects from the past. The pilot project describes a case study in which the historical transformation of a town will be analyzed by using three- dimensional CAD models in combination with bitmap textures. The transformation of the historic town will be visualized in a space-time computer model in which bitmap textures enable us to display complex and relatively large architectural objects in detail. This three-dimensional descriptive model allows us to survey and analyze the history of architecture in its reconstructed context. It also provides a medium for researching the dynamics of urban management, since new combinations and arrangements with the individual architectural objects can be created. In this way, a new synthesis of the graphic material can reveal typologies and the architectural ordering system of a town.
keywords	3D City modeling
series	CAAD Futures
last changed	2003/11/21 15:15

_id	27d2
authors	Ayrle, Hartmut
year	1991
title	Computers for Architects - Only a Tool?
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.i9j
summary	The paper states that, as a result of the schism between architecture as art and engineering as rationalism, the architectural community underestimates the computer as tool with a potential to substantially enlarge the possibilities of building design. It is claimed that the computer could serve as coordination tool for the ruptured design process, as a virtual workbench where all design disciplines sit together and develop their designs in enhanced conscience of what the whole design demands. The paper then concludes, that to develop such software tools, architects must participate in the development of software and may no longer be restricted to the role of applicants, especially during their universitary instruction. The corresponding research and training facilities at the University of Karlsruhe, Faculty of Architecture are described.
series	eCAADe
last changed	2022/06/07 07:50

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	00bc
authors	Chen, Chen-Cheng
year	1991
title	Analogical and inductive reasoning in architectural design computation
source	Swiss Federal Institute of Technology, ETH Zurich
summary	Computer-aided architectural design technology is now a crucial tool of modern architecture, from the viewpoint of higher productivity and better products. As technologies advance, the amount of information and knowledge that designers can apply to a project is constantly increasing. This requires development of more advanced knowledge acquisition technology to achieve higher functionality, flexibility, and efficient performance of the knowledge-based design systems in architecture. Human designers do not solve design problems from scratch, they utilize previous problem solving episodes for similar design problems as a basis for developmental decision making. This observation leads to the starting point of this research: First, we can utilize past experience to solve a new problem by detecting the similarities between the past problem and the new problem. Second, we can identify constraints and general rules implied by those similarities and the similar parts of similar situations. That is, by applying analogical and inductive reasoning we can advance the problem solving process.The main objective of this research is to establish the theory that (1) design process can be viewed as a learning process, (2) design innovation involves analogical and inductive reasoning, and (3) learning from a designer's previous design cases is necessary for the development of the next generation in a knowledge-based design system. This thesis draws upon results from several disciplines, including knowledge representation and machine learning in artificial intelligence, and knowledge acquisition in knowledge engineering, to investigate a potential design environment for future developments in computer-aided architectural design. This thesis contains three parts which correspond to the different steps of this research. Part I, discusses three different ways - problem solving, learning and creativity - of generating new thoughts based on old ones. In Part II, the problem statement of the thesis is made and a conceptual model of analogical and inductive reasoning in design is proposed. In Part III, three different methods of building design systems for solving an architectural design problem are compared rule-based, example-based, and case-based. Finally, conclusions are made based on the current implementation of the work, and possible future extensions of this research are described. It reveals new approaches for knowledge acquisition, machine learning, and knowledge-based design systems in architecture.
series	thesis:PhD
email
last changed	2003/05/10 05:42

For more results click below: