Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 219

Reformat results as: short short into frame detailed detailed into frame

_id	0aba
authors	Carrara, Gianfranco, Kalay, Yehuda E. and Novembri, Gabriele
year	1991
title	Intelligent Systems for Supporting Architectural Design
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 191-202
summary	Design can be considered a process leading to the definition of a physical form that achieves a certain predefined set of objectives. The process comprises three distinct operations: (1) definition of the desired set of performance criteria (design goals); (2) production of alternative design solutions; (3) evaluation of the expected performances of alternative design solutions, and comparing them to predefined criteria. Difficulties arise in performing each one of the three operations, as well as in combining them into a purposeful, unified process. First, it is difficult to define the desired performance criteria prior to and independently of, the search for an acceptable solution that achieves them, since many aspects of the desired criteria can only be discovered through the search for an acceptable solution. Furthermore, the search for such a solution may well alter the definition of these criteria, as new criteria and incompatibilities between existing criteria are discovered. Second the generation of a design solution is a task demanding creativity, judgement, and experience, all three of which are difficult to define, teach, and otherwise capture in some explicit manner. Third, it is difficult to evaluate the expected performances of alternative design solutions and to compare them to the predefined criteria. Design parameters interact with each other in complex ways, which cause effects and side effects. Predicting the expected performances of even primary effects involves extrapolating non-physical characteristics from the proposed solution's physical organization, a process which relies on a host of assumptions (physical, sociological, psychological, etc.) and hence is seldom a reliable measure. A fourth problem arises from the need to coordinate the three operations in an iterative process that will converge on an acceptable design solution in reasonable time. Computational techniques that were developed in the past to assist designers in performing the above mentioned activities have shown limitations and proved inadequate to a large degree. In this paper we discuss the work in progress aimed at developing an intelligent support system for building and architectural design, which will be able to play a decisive role in the definition, evaluation and putting into effect of the design choices.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	diss_hensen
id	diss_hensen
authors	Hensen, J.L.M.
year	1991
title	On the Thermal Interaction of Building Structure and Heating and Ventilating System
source	Eindhoven University of Technology
summary	In this dissertation, developments in the field of building performance evaluation tools are described. The subject of these tools is the thermal interaction of building structure and heating and ventilating system. The employed technique is computer simulation of the integrated, dynamic system comprising the occupants, the building and its heating and ventilating system. With respect to buildings and the heating and ventilating systems which service them, the practical objective is ensuring thermal comfort while using an optimum amount of fuel. While defining the optimum had to be left for other workers, the issue of thermal comfort is addressed here. The conventional theory of thermal comfort in conditions characteristic for dwellings and offices assumes steady-state conditions. Yet thermal conditions in buildings are seldom steady, due to the thermal interaction between building structure, climate, occupancy, and auxiliary systems. A literature rewiew is presented regarding work on thermal comfort specifically undertaken to examine what fluctuations in indoor climate may be acceptable. From the results, assessment criteria are defined. Although its potentials reach beyond the area of Computer Aided Building Design, a description is given of building and plant energy simulation within the context of the CABD field of technology. Following an account of the present state-of-the-art, the choice for starting from an existing energy simulation environment (ESPR) is justified. The main development areas of this software platform - within the present context - are identified as: fluid flow simulation, plant simulation, and their integration with the building side of the overall problem domain. In the field of fluid flow simulation, a fluid flow network simulation module is described. The module is based on the mass balance approach, and may be operated either in standalone mode or from within the integrated building and plant energy simulation system. The program is capable of predicting pressures and mass flows in a user-defined building / plant network comprising nodes (ie building zones, plant components, etc) and connections (ie air leakages, fans, pipes, ducts, etc), when subjected to flow control (eg thermostatic valves) and / or to transient boundary conditions (eg due to wind). The modelling and simulation techniques employed to predict the dynamic behaviour of the heating and ventilating system, are elaborated. The simultaneous approach of the plant and its associated control is described. The present work involved extensions to the ESPR energy simulation environment with respect to robustness of the program, and with respect to additional plant simulation features, supported plant component models and control features. The coupling of fluid flow, plant side energy and mass, and building side energy simulation into one integrated program is described. It is this "modular-simultaneous" technique for the simulation of combined heat and fluid flow in a building / plant context, which enables an integral approach of the thermal interaction of building structure and heating and ventilating system. A multi stage verification and validation methodology is described, and its applicability to the present work is demonstrated by a number of examples addressing each successive step of the methodology. A number of imaginary and real world case studies are described to demonstrate application of the present work both in a modelling orientated context and in a building engineering context. Then the general conclusions of the present work are summarized. Next and finally, there are recommendations towards possible future work in the areas of: theory, user interface, software structure, application, and technology transfer.
series	thesis:PhD
last changed	2003/12/15 14:43

_id	2eb4
authors	Johnson, Robert E.
year	1991
title	ESP - An Expert System for Property Revitalization
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 425-442
summary	This paper reports on the development of a knowledge based system that can help to assess the reuse potential of idle industrial property. It does not take the place of the architect or engineer, but allows for strategic design factors to be considered in very early and important property redesign and revitalization decisions. The idea is predicated on the judgment that there is a relatively systematic approach to evaluating the reuse potential of vacant property. A frame based approach together with a series of "if-then" rules are used to represent the knowledge domain and procedures required to perform a feasibility analysis. Rules for assessing the impact of the regional economy, industrial market trends, building configuration, building design strategies and the impact of building codes are included in this manner. A prototype of this system system has been implemented on both an Apple Macintosh computer using AAIS Prolog and an IBM AT compatible using Arity/Prolog.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4c21
authors	Streich, Bernd
year	1991
title	Creating Architecture Models by Computer-Aided Prototyping
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 535-548
summary	In the future architects or urban planners will probably ask for architectural models based on CAD-generated model data, in addition to the usual graphical representation. A stereolithography process makes this possible. Currently, at the University of Kaiserslautern there is a research project investigating and evaluating possible applications for this technology in the fields of architecture and town planning. The first results of this research project are described in the following article.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	227a
authors	Bourdeau, L., Dubois, A.-M. and Poyet, P.
year	1991
title	A Common Data Model for Computer Integrated Building
source	computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : some ill. includes bibliography
summary	The connection of various building performance evaluation tools in a collaborative way is an essential request to develop true CAD systems. It is a basic requirement for the future of integrated information systems for building projects, where data concerning multiple aspects of the project can be exchanged during the different design steps. This paper deals with the on-going research concerning the generation of a common data model in the framework of a European collaborative action, the COMBINE Project, which is supported by the CEC, General Directorate XII for Research Science and Development, within the JOULE programme. The first step of the research concerns the progressive construction of a conceptual model and the paper focuses on the development of this Integrated Data Model (IDM). The paper reports on the definition of the architecture of the IDM. The main issues and the methodology of the IDM development are presented. The IDM development methodology is based on successive steps dealing with the identification of the data and context which are considered by the Design Tool Prototypes (DTP) to be connected through the IDM, the conceptual integration of this knowledge, and the implementation of the model on an appropriate software environment
keywords	standards, integration, communication, building, evaluation, modeling
series	CADline
last changed	2003/06/02 14:41

_id	00bc
authors	Chen, Chen-Cheng
year	1991
title	Analogical and inductive reasoning in architectural design computation
source	Swiss Federal Institute of Technology, ETH Zurich
summary	Computer-aided architectural design technology is now a crucial tool of modern architecture, from the viewpoint of higher productivity and better products. As technologies advance, the amount of information and knowledge that designers can apply to a project is constantly increasing. This requires development of more advanced knowledge acquisition technology to achieve higher functionality, flexibility, and efficient performance of the knowledge-based design systems in architecture. Human designers do not solve design problems from scratch, they utilize previous problem solving episodes for similar design problems as a basis for developmental decision making. This observation leads to the starting point of this research: First, we can utilize past experience to solve a new problem by detecting the similarities between the past problem and the new problem. Second, we can identify constraints and general rules implied by those similarities and the similar parts of similar situations. That is, by applying analogical and inductive reasoning we can advance the problem solving process.The main objective of this research is to establish the theory that (1) design process can be viewed as a learning process, (2) design innovation involves analogical and inductive reasoning, and (3) learning from a designer's previous design cases is necessary for the development of the next generation in a knowledge-based design system. This thesis draws upon results from several disciplines, including knowledge representation and machine learning in artificial intelligence, and knowledge acquisition in knowledge engineering, to investigate a potential design environment for future developments in computer-aided architectural design. This thesis contains three parts which correspond to the different steps of this research. Part I, discusses three different ways - problem solving, learning and creativity - of generating new thoughts based on old ones. In Part II, the problem statement of the thesis is made and a conceptual model of analogical and inductive reasoning in design is proposed. In Part III, three different methods of building design systems for solving an architectural design problem are compared rule-based, example-based, and case-based. Finally, conclusions are made based on the current implementation of the work, and possible future extensions of this research are described. It reveals new approaches for knowledge acquisition, machine learning, and knowledge-based design systems in architecture.
series	thesis:PhD
email
last changed	2003/05/10 05:42

_id	cdb1
authors	Cornick, T., Noble, B. and Hallahan, C.
year	1991
title	The Limitations of Current Working Practices on the Development of Computer Integrating Modelling in Construction
source	computer Integrated Future, CIB W78 Seminar. Calibre, The Netherlands: Eindhoven University of Technology, september, 1991. Unnumbered. includes bibliography
summary	For the construction Industry to improve its processes through the application computer-based systems, traditional working practices must first change to support the integrated control of design and construction. Current manual methods of practice accept the limitations of man to process a wide range of building performance and production information simultaneously. However when these limitations are removed, through the applications of computer systems, the constraints of manual methods need no longer apply. The first generation of computer applications to the Construction Industry merely modelled the divided and sequential processes of manual methods i.e. drafting, specification writing, engineering and quantity calculations, estimating, billing, material ordering data-bases and activity planning. Use of these systems raises expectations that connections within the computer between the processes modelled can actually be made and faster and more integrated information processing be achieved. 'Linking' software is then developed. The end result of this approach was that users were able to produce information faster, present it in an impressive manner but, in reality, no perceived improvement in actual building performance, production economy or efficiency was realized. A current government sponsored Teaching Company Programme with a UK design and build company is addressing the problem of how real economic benefit can be realized through improvement in, amongst other things, their existing computer applications. This work is being carried out by both considering an academic conceptual model of how 'designing for production' can be achieved in computer applications and what is immediately realizable in practice by modelling the integration of a limited number of knowledge domains to which computers are already being applied. i.e. billing from design, estimating and buying. This paper describes each area of work and how they are impacting on each other
keywords	construction, building process, integration
series	CADline
last changed	2003/06/02 13:58

_id	eaca
authors	Davis, L. (ed.)
year	1991
title	Handbook of genetic algorithms
source	Van Nostrand Reinhold, New York
summary	This book sets out to explain what genetic algorithms are and how they can be used to solve real-world problems. The first objective is tackled by the editor, Lawrence Davis. The remainder of the book is turned over to a series of short review articles by a collection of authors, each explaining how genetic algorithms have been applied to problems in their own specific area of interest. The first part of the book introduces the fundamental genetic algorithm (GA), explains how it has traditionally been designed and implemented and shows how the basic technique may be applied to a very simple numerical optimisation problem. The basic technique is then altered and refined in a number of ways, with the effects of each change being measured by comparison against the performance of the original. In this way, the reader is provided with an uncluttered introduction to the technique and learns to appreciate why certain variants of GA have become more popular than others in the scientific community. Davis stresses that the choice of a suitable representation for the problem in hand is a key step in applying the GA, as is the selection of suitable techniques for generating new solutions from old. He is refreshingly open in admitting that much of the business of adapting the GA to specific problems owes more to art than to science. It is nice to see the terminology associated with this subject explained, with the author stressing that much of the field is still an active area of research. Few assumptions are made about the reader's mathematical background. The second part of the book contains thirteen cameo descriptions of how genetic algorithmic techniques have been, or are being, applied to a diverse range of problems. Thus, one group of authors explains how the technique has been used for modelling arms races between neighbouring countries (a non- linear, dynamical system), while another group describes its use in deciding design trade-offs for military aircraft. My own favourite is a rather charming account of how the GA was applied to a series of scheduling problems. Having attempted something of this sort with Simulated Annealing, I found it refreshing to see the authors highlighting some of the problems that they had encountered, rather than sweeping them under the carpet as is so often done in the scientific literature. The editor points out that there are standard GA tools available for either play or serious development work. Two of these (GENESIS and OOGA) are described in a short, third part of the book. As is so often the case nowadays, it is possible to obtain a diskette containing both systems by sending your Visa card details (or $60) to an address in the USA.
series	other
last changed	2003/04/23 15:14

_id	ecaade2007_073
id	ecaade2007_073
authors	Francis, Sabu
year	2007
title	Web Based Collaborative Architectural Practice Using a Fractal System
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 727-734
doi	https://doi.org/10.52842/conf.ecaade.2007.727
summary	I have been working on an architecture representation system in India since 1991; that markedly deviates from the need of traditional drawings as we know. Over three million square feet of work has been done that took advantage of this system as it was being developed. The system has now matured sufficiently to be put into practice as a comprehensive architectural system of practice. It takes advantage of creation of just-in-time dynamic multi-organizations that can get formed (and dismantled) over the Internet on a project to project basis. The raison d’être of the representation system is that it would expose the “source-code” (metaphorically) of any work of architecture to stakeholders, much the same way as an open-source software project exposes the internal representation to fellow developers. I believe the design of architecture must go through an “open source” process in order to produce socially responsible designs. Such a stance is explained in this paper. The paper also explains the system in detail; its mathematical basis and justifies the need for such an approach. It also explores how a collaborative practice can be put into place using the system in the context of Internet technologies.
keywords	Collaborative practice, fractals, representation system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	46ce
id	46ce
authors	Gero, J. S.
year	1991
title	Ten problems for AI in design
source	Workshop on AI in Design, IJCAI-91, un-numbered
summary	Modern design research dates back to the end of the eighteenth century when French theorists attempted to describe design as a process. The notion of process in design dates back to the Roman engineer/architect/writer Vitruvius who described both process and performance aspects of designing. Since the 1940s there has been a variety of attempts to provide formal models of design ranging from prescriptive algorithmic-like descriptions through mathematical model and systems theoretic descriptions to the current paradigm based on the precepts and notions of artificial intelligence. All of these, including the current work, is primarily concerned with treating the process aspects of design.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:38

_id	cb47
authors	Kalay, Yehuda E.
year	1991
title	Computational Modalities of Evaluation and Prediction in Design
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 271-284
summary	Evaluation can be defined as measuring the fit between achieved (or expected) performances and stated criteria. It is complicated by the multi-criteria and multi-level modalities of design, where an overall balance of performances is preferred to maximizing the performance of a few characteristics, and where evaluation must be performed at different design phases, each characterized by a different informational profile. Each design modality requires a different approach to evaluation: the Multi-Criteria modality requires evaluation of a proposed solution at a particular design phase from multiple points of view, while the Multi-Level modality requires the evaluation of a particular performance characteristic at several different design phases. This paper discusses the multi-modal nature of evaluation and prediction in design, exemplified by some of the approaches that have been proposed to support them computationally. It then argues for the need to develop an integrated, multi-modal design evaluation paradigm.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e714
authors	Lawrence, Roderick J.
year	1991
title	SIMULATIONS OF ARCHITECTURAL PROJECTS: METHODS AND APPLICATIONS AT FULL-SCALE
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 53-64
summary	This paper briefly examines five interrelated themes concerning the use of full-scale simulation models in architectural projects, in the context of research and professional practice. First, the meaning of design is discussed. Second, a multi-functional interpretation of building performance is presented. Third, the main reasons for simulating design projects, in general, and for using full-scale models, in particular, are summarized. Then the antecedent or prerequisite conditions for public participation to occur effectively are discussed. Finally, an overview of the use of full-scale simulation models in European workshops enables us to table four ma n classes of functions for full-scale models.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	eee5
authors	Luczak, H., Beitz, W., Springer, J. and Langner, T.
year	1991
title	Frictions and Frustrations in Creative-Informatory Work with Computer Aided Design -- CAD-Systems -- Congress I: Work with Terminals: HEALTH ASPECTS: WORKLOAD, STRESS AND STRAIN AND IRREGULAR WORKING HOURS; Causes and Measures of Stress
source	Proceedings of the Fourth International Conference on Human-Computer Interaction 1991 v.1 pp. 175-179
summary	The effects of computer aided design work on the design process are analysed by field experiments. The study focuses on the influence of 3 different design tasks (standard tasks) and 11 CAD-systems (2D and 3D), taking into account the performance and strain measurements of 43 subjects (15 design engineers, 8 technicians, 17 draughtsmen, 3 trainees). The 3 standard tasks differ in performance measurements, especially in time spent on task, quantity of generated elements, not in the quality of the solution. The kind of CAD-system influences the time spent on task as well as the design performance, with significant differences of up to 100%. The same tendency can be diagnosed in a comparison of 2D and 3D systems. During the use of different functions of the CAD-system, strain effects are identified by cross-correlation with continuously measured physiological parameters, even with CAD-functions which should reduce stresses of routine work. Deficits and complications in the handling of CAD-systems increase with the complexity of the system and thus cause an antinome effect on performance and strain of its operators: creativity is reduced by frictions and frustrations in system handling even if operators are highly trained.
keywords	Stressor Analysis; Performance Measurement; Field-Experiment; Design Process
series	other
last changed	2002/07/07 16:01

_id	e573
authors	McLaughlin, Sally
year	1991
title	Reading Architectural Plans: A Computable Model
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 347-364
summary	A fundamental aspect of the expertise of the architectural designer is the ability to assess the quality of existing and developing proposals from schematic representations such as plans, elevations and sections. In this paper I present a computable model of those aspects of the evaluation of architectural floor plans that I believe to be amenable to rule-like formulation. The objective behind the development of this model is twofold: 1) to articulate a belief about the role of simple symbolic representations in the task of evaluation, a task which relies primarily on uniquely human capabilities; and 2) to explore the possible uses of such representations in the development of design expertise. // Input to the model consists of a specification of a design proposal in terms of walls, doors, windows, openings and spaces together with a specification of the context in which the proposal has been developed. Information about context is used to retrieve the goal packages relevant to the evaluation of the proposal. The goal packages encode information about requirements such as circulation, visual privacy and thermal performance. Generic associations between aspects of a plan and individual goals are used to establish if and how each of the goals have been achieved in the given proposal. These associations formalize relationships between aspects of the topology of the artefact, such as the existence of a door between two rooms, and a goal, in this case the goal of achieving circulation between those two rooms. Output from the model consists of both a graphic representation of the way in which goals are achieved and a list of those goals that have not been achieved. The list of goals not achieved provides a means of accessing appropriate design recommendations. What the model provides is essentially a computational tool for exploring the value judgements made in a particular proposal given a set of predefined requirements such as those to be found in design recommendation literature.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	a113
authors	Milne, Murray
year	1991
title	Design Tools: Future Design Environments for Visualizing Building Performance
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 485-496
summary	In the future of Computer Aided Architectural Design (CAAD), architects clearly need more than just computer aided design and drafting systems (CAD). Unquestionably CAD systems continue to become increasingly powerful, but there is more to designing a good building than its three-dimensional existence, especially in the eyes of all the non-architects of the world: users, owners, contractors, regulators, environmentalists. The ultimate measure of a building's quality has something to do with how well it behaves over time. Predictions about its performance have many different dimensions; how much it costs to build, to operate, and to demolish; how comfortable it is; how effectively people can perform their functions in it; how much energy it uses or wastes. Every year dozens of building performance simulation programs are being written that can predict performance over time along any of these dimensions. That is why the need for both CAD systems and performance predictors can be taken for granted, and why instead it may be more interesting to speculate about the need for 'design tools'. A design tool can be defined as a piece of software that is easy and natural for architects to use, that easily accommodates three-dimensional representations of the building, and that-predicts something useful about a building's performance. There are at least five different components of design tools that will be needed for the design environment of the future.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	7508
authors	Montgomery, D.C.
year	1991
title	Design and Analysis of Experiments
source	John Wiley, Chichester
summary	Learn How to Achieve Optimal Industrial Experimentation Through four editions, Douglas Montgomery has provided statisticians, engineers, scientists, and managers with the most effective approach for learning how to design, conduct, and analyze experiments that optimize performance in products and processes. Now, in this fully revised and enhanced Fifth Edition, Montgomery has improved his best-selling text by focusing even more sharply on factorial and fractional factorial design and presenting new analysis techniques (including the generalized linear model). There is also expanded coverage of experiments with random factors, response surface methods, experiments with mixtures, and methods for process robustness studies. The book also illustrates two of today's most powerful software tools for experimental design: Design-Expert(r) and Minitab(r). Throughout the text, You'll find output from these two programs, along with detailed discussion on how computers are currently used in the analysis and design of experiments. You'll also learn how to use statistically designed experiments to: * Obtain information for characterization and optimization of systems * Improve manufacturing processes * Design and develop new processes and products * Evaluate material alternatives in product design * Improve the field performance, reliability, and manufacturing aspects of products * Learn how to conduct experiments effectively and efficiently Other important textbook features: * Student version of Design-Expert(r) software is available. * Web site (www.wiley.com/college/montgomery) offers supplemental text material for each chapter, a sample syllabus, and sample student projects from the author's Design of Experiments course at Arizona State University.
series	other
last changed	2003/04/23 15:14

_id	83b4
authors	Tan, Milton
year	1991
title	Themes for Schemes: Design Creativity as the Conceptualization, Transformation, and Representation of Emergent Forms
source	Harvard University, Graduate School of Design
summary	Architects, graphic designers, and others frequently develop designs by picking out and transforming subshapes of two-dimensional or three-dimensional shapes. Shape grammars formalize this aspect of design by specifying rules of the form $a /to b$: the left-hand side a describes a type of subshape that may be picked out, while the right-hand side b describes what that type of subshape may become. Designs in the language specified by a shape grammar are derived by recursively applying the shape transformation rules to a starting shape. To apply a shape-transformation rule automatically, a computer system, must have the capacity to recognize instances of the type of subshape specified on the left-hand side of the rule. Sometimes such instances are explicitly input by the designer, and explicitly represented in a data structure: in this case, recognition is a relatively straightforward task. But there may also be 'emergent' instances that were not explicitly input, and are only indirectly represented in the data structure. These emergent instances are potentially numerous, and may be extremely difficult to discover. This thesis focuses on mechanisms for picking out and transforming subshapes. The first three chapters place the issue in its broadest context by arguing that different designers--bringing different knowledge and attitudes to the task--will pick out and pay attention to different subshapes in a drawing. This contention is supported by introducing some of the relevant literature on perception, problem-solving, and creativity. Chapter 4 introduces shape grammars to provide a more formal framework for investigating this topic. Chapter 5 describes the properties and limitations of Topdown--a computer program which supports design by applying the rules of a shape grammar, but does not provide for recognition of emergent subshapes. Chapter 6 introduces ECART, a computer program which supports efficient recognition and transformation of emergent subshapes, and demonstrates how its performance transcends that of Topdown. Examination of the results produced by ECART suggest that a designer's conceptual filter--the repertoire of subshape types that he or she can recognize in a drawing--plays a crucial role in the development of design ideas.
keywords	Computer Graphics; Computer Software; Development
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	241f
authors	Van Wyk, C.S.G., Bhat, R., Gauchel, J. and Hartkopf, V.
year	1991
title	A Knowledge-based Approach to Building Design and Performance Evaluation
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 1-14
doi	https://doi.org/10.52842/conf.acadia.1991.001
summary	The introduction of physically-based description and simulation methods to issues of building performance (i.e., acoustic, visual, and air quality; thermal comfort, cost, and long-term system integrity) began in the early 1960s as one of the first examples of computer-aided design in architecture. Since that time, the development of commercially-available computer-aided design systems has largely been oriented towards the visualization and representation of the geometry of buildings, while the development of building performance applications has been concerned with approaches to mathematical and physics-based modeling for predictive purposes.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
doi	https://doi.org/10.52842/conf.ecaade.2010.815
wos	WOS:000340629400087
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: