Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 217

Reformat results as: short short into frame detailed detailed into frame

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	9c37
id	9c37
authors	Coates P, Derix C, Krakhofer S and Karanouh A
year	2005
title	Generating Architectural Spatial Configurations: two approaches using voronoi tessellations and particle systems
source	Proceedings of the Generative Arts conference, Milan, 2005
summary	It was one of the primary goals of the original Master’s programme in Computing and design at UEL in 1991 that we should work towards defining morphological generative processes for the conceptual design of architectural objects. These two papers offer a range of techniques which have been developed by two of this years MSc students (04-05) which show that we are getting close to this. The approaches range from computational geometric approaches (3d parametrics and voronoi diagrams) to emergent spatial organisation using agent based modelling. In many cases the resultant geometry is defined to the point where it can be transferred to advanced evaluation and fabrication systems, thus making this work sufficiently developed to begin to form a useful part in practical design processes.
keywords	morphology, computational geometry, particle systems, physical simulation, voronoi diagrams
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:39

_id	44c8
authors	Hacfoort, E.J.H.
year	1991
title	The COSMOS Building Design Tool
doi	https://doi.org/10.52842/conf.ecaade.1991.x.q9d
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	This paper describes the development of a method to bring expert knowledge forward in the preliminary stage of the design process. We are focusing on the use of a graphic interface which makes it possible, in an easy and for a designer, familiar way, to state explicitly about the technical and economical impact of his design proposals. The first problem to overcome was to provide the designer with a design tool that combines the capability to reflect the geometry of the design and at the same time generate systematically, for computing and evaluation, a usable database. To fulfil this task we developed the program COSMOS, it receives the basic geometry of a design and produces a set of data which can be partly evaluated inside the program and furthermore function for design and computation in specialized programs. In this paper COSMOS is presented as the design tool developed so far and which we are now are introducing and testing in the education of building design and building physics at our faculty.
series	eCAADe
last changed	2022/06/07 07:50

_id	ea2f
authors	Heisserman, Jeff A.
year	1991
title	Generative geometric design and boundary solid grammars
source	Carnegie Mellon University, Department of Architecture
summary	This thesis explores the automatic generation of solid models based on a grammatical paradigm. It introduces a formalism, boundary solid grammars, for this purpose. In this formalism, a set of geometric rules is applied to an initial solid model to generate a language or family of solids. A rule may match on a portion of the boundary of a solid, and then modify the solid or add new solids. Genesis is presented as an implementation of the formalism. A number of grammars have been constructed to demonstrate the concepts and usefulness of the formalism. These grammars generate simple geometric forms including snodakes, recursive octahedra, “fractal” mountains, and spirals. Another grammar generates stereo lithography support structures. Queen Anne houses have been characterized with a more extensive grammar. Grammars are also being developed to generate housings for small computers and structural designs for high rise buildings. The thesis introduces the unary shape operations and a new paradigm for solid modeling, The unary shape operations take models that may have self-intersections, interpret the models consid- ering the given geometry and face orientations, and produce valid models. Local operations, the unary shape operations, and Boolean operations are used together within a valid modeling scheme. The thesis introduces a new boundary representation for manifold and nonmanifold solids, the generalized split-edge representation. It describes generalized Euler operations which manipulate the topology of the nonmanifold representation. Finally, the thesis presents a form of the Euler- Poincare equation that characterizes the relationship between elements of nonmanifold surfaces of solids.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ead3
authors	Meinecke, Christoph and Scherer, Raimar J.
year	1991
title	Architecture of a Knowledge- Based -System for the Detailing of Reinforced Concrete Columns
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 451-464
summary	This paper presents the hypothesis part of an expert-system for detailing reinforced concrete structures. The structural members on which the work is focused are columns. To generate a hypothesis - that means to configurate the reinforcement for a given structural member with an almost fixed geometry - needs different kinds of information, i.e. knowledge and a strategy to apply this knowledge. Therefore a hybrid system is chosen which combines object oriented organization to represent the fixed knowledge and a rule base to model the strategy and the dynamic knowledge.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	9ad2
authors	Owen, J.C.
year	1991
title	Algebraic Solution for Geometry from Dimensional Constraints
source	ACM Symp. Found. of Solid Modeling, Austin TX, pp. 397-407
summary	We investigate general configurations of distance and angle dimensions between points, lines and circles on a plane. A simple graphical representation is described for the system of coupled ctuadratic equations which results from treating the geometries as variables and the dimensions as defining equations. For many configurations of practical interest we show that these equations are poorly suited to numerical solution. We describe an algorithm for computing the solution to a subset of all possible configurations of geometry and dimensions using purely algebraic methods (in fact the usual arithmetic operations plus square roots). We show that this algorithm solves for all configurations of a practically useful type and that it solves for any configuration which can in principle be solved using these algebraic operations. Specifically, we use the Galois theory of equations to show that the following statements are equivalent. 1. The geometry can be constructed in principle on a drawing board using a ruler and compasses. 2. The coordinates of the geometries can be computed algebraically using only arithmetic operations plus square root. 3. The coordinates of the geometries lie in a normal field extension over the dimension values of degree 2n for some n. 4. For general (i.e. algebraically independent) dimension values the algorithm described will compute the geometries. We also describe a working implementation of the algorithm and describe some extensions to the basic ideaa which are necessary to make it a practically useful way to specify geometry by means of dimensional constraints.
series	other
last changed	2003/04/23 15:50

_id	ecaade2023_281
id	ecaade2023_281
authors	Prokop, Šimon, Kubalík, Jiøí and Kurilla, Lukáš
year	2023
title	Neural Networks for Estimating Wind Pressure on Complex Double-Curved Facades
doi	https://doi.org/10.52842/conf.ecaade.2023.2.639
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 639–647
summary	Due to their complex geometry, it is challenging to assess wind effects on the freeform, double-curved building facades. The traditional building code EN 1991-1-4 (730035) only accounts for basic shapes such as cubes, spheres, and cylinders. Moreover, even though wind tunnel measurements are considered to be more precise than other methods, they are still limited by the number of measurement points that can be taken. This limitation, combined with the time and resources required for the analysis, can limit the ability to fully capture detailed wind effects on the whole complex freeform shape of the building. In this study, we propose the use of neural network models trained to predict wind pressure on complex double-curved facades. The neural network is a powerful data-driven machine learning technique that can, in theory, learn an approximation of any function from data, making it well-suited for this application. Our approach was empirically evaluated using a set of 31 points measured in the wind tunnel on a 3D printed model in 1:300 scale of the real architectural design of a concert hall in Ostrava. The results of this evaluation demonstrate the effectiveness of our neural network method in estimating wind pressures on complex freeform facades.
keywords	wind pressure, double-curved façade, neural network
series	eCAADe
email
last changed	2023/12/10 10:49

_id	f14c
authors	Sariyildiz, Sevil
year	1991
title	Conceptual Design by Means of Islamic-Geometric-Patterns within a CAAD-Environment
source	Delft University of Technology
summary	The starting point in this research was to develop a 3D grammar theory on top of existing 2D Islamic-geometric-patterns, trying to rescue their fundamental geometry contents to be applied in contemporary architecture without compromising any architectural style. As it is self evident the architectural design process consists of clearly distinct stages namely conceptual design, materialisation and further completion. A this conceptual stage the innovative item of the research deals with pattern grammars on 3D complex geometrical patterns, considering them as polyhedra and polytopes, for their use as an underlayer to a concept design, like architects use 2D rectangular and triangular grids by the conventional way. Handling these complex 3D patterns requires a special environment which is possible with CAAD. Within the CAAD environment, the handling of these complex patterns is easily done by means of 3D tools, because the 3D tools permit the user to make any possible manipulations and geometrical transformations in an easier way in space. To a geometrical patterns, there is some attention paid during the last 50 years by some scholars. The most complex geometrical patterns are highly developed in Islamic architecture because it is forbidden in Muslim religion to use man's portraits or sculptures of human beings in the religious buildings. All these approaches to complex patterns are analysed and studied as 2D elements. The question was how could we consider them in 3rd dimensions and use them instead of 2D underlayer, as 3D underlayers in the conceptual phase of the CAAD design. Pattern grammar is a generally employable aid (underlying pattern) for conceptual and material designs. On the basis of rules of symmetry and substitution, ordering principles have been worked out, which can be used for formal design methods as well as detailing systems (e.g. modular coordination). Through the realization of a pattern grammar a wider range of underlying patterns can be offered and a choice from these can be made in a more fundamental manner. At a subsequent stage the collection of "empty boxes" can be filled with (architectural) elements in such a way that another option is created between either filling up the boxes completely, filling them partly, or filling them in such a way that they overflow. It is self-evident that underlying patterns can also be used for details and decoration in a design. Concerning the materialisation of the concept design, within the 3D CAAD environment, substitution methods are partially developed. Further theoretical developments concerning the materialisation phase constantly backed up through feed-back with specialist matters (such as e.g. by means of expert systems, decision-support systems), must be worked out. As feed-back of the research, the possibilities of the design with 3D patterns have been tested and the procedures are explained. () Working with 3D patterns gives a designer more inspirations to develop new ideas and new concepts and gives the opportunity to handle the complexity. () The formal, structural and symmetrical qualities of geometrical patterns has a positive influence on the industrialisation of the building components. (*) Working with 3D tools which are able to handle complex geometry have a result because of the accuracy of the information, that there has hardly been a mistake made during the preparation and the assembly of the building components. This has also positive results concerning the financial aspects of the building process.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	241f
authors	Van Wyk, C.S.G., Bhat, R., Gauchel, J. and Hartkopf, V.
year	1991
title	A Knowledge-based Approach to Building Design and Performance Evaluation
doi	https://doi.org/10.52842/conf.acadia.1991.001
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 1-14
summary	The introduction of physically-based description and simulation methods to issues of building performance (i.e., acoustic, visual, and air quality; thermal comfort, cost, and long-term system integrity) began in the early 1960s as one of the first examples of computer-aided design in architecture. Since that time, the development of commercially-available computer-aided design systems has largely been oriented towards the visualization and representation of the geometry of buildings, while the development of building performance applications has been concerned with approaches to mathematical and physics-based modeling for predictive purposes.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	c900
authors	Wake, Warren K. and McCullough, Malcolm
year	1991
title	Architectural Tours through Texture Space
doi	https://doi.org/10.52842/conf.acadia.1991.053
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 53-62
summary	One challenge to the computer-aided designer is to portray physical realities using only visual, logical, or numerical representations. Recently there has been a lot of speculation about meeting this challenge with a new dimension of tools which couples physical interaction to animated output: cyberspace. However, so long as certain inherent limitations remain in the physical part of cyberspace prototypes, there is more to be gained in improving our graphics independently. One aspect of graphics for portraying physicality which we can address right now is texture.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
doi	https://doi.org/10.52842/conf.ecaade.2010.815
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
wos	WOS:000340629400087
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2560
authors	Alkhoven, Patricia
year	1991
title	The Reconstruction of the Past: The Application of New Techniques for Visualization and Research in Architectural History
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 549-566
summary	This paper focuses on the visualization of historical architecture. The application of new Computer-Aided- Architectural-Design techniques for visualization on micro computers provides a technique for reconstructing and analyzing architectural objects from the past. The pilot project describes a case study in which the historical transformation of a town will be analyzed by using three- dimensional CAD models in combination with bitmap textures. The transformation of the historic town will be visualized in a space-time computer model in which bitmap textures enable us to display complex and relatively large architectural objects in detail. This three-dimensional descriptive model allows us to survey and analyze the history of architecture in its reconstructed context. It also provides a medium for researching the dynamics of urban management, since new combinations and arrangements with the individual architectural objects can be created. In this way, a new synthesis of the graphic material can reveal typologies and the architectural ordering system of a town.
keywords	3D City modeling
series	CAAD Futures
last changed	2003/11/21 15:15

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	a620
authors	Asanowicz, Alexander
year	1991
title	Unde et Quo
doi	https://doi.org/10.52842/conf.ecaade.1991.x.t1s
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	To begin with, I would like to say a few words about the problem of alienation of modern technologies which we also inevitably faced while starting teaching CAD at our department. Quite often nowadays a technology becomes a fetish as a result of lack of clear goals in human mind. There are multiple technologies without sense of purpose which turned into pure experiments. There is always the danger of losing purposeness and drifting toward alienation. The cause of the danger lies in forgetting about original goals while mastering and developing the technology. Eventually the original idea is ignored and a great gap appears between technical factors and creativity. We had the danger of alienation in mind when preparing the CAAD curriculum. Trying to avoid the tension between technical and creative elements we agreed not to introduce CAD too soon then the fourth year of studies and continue it for two semesters. One thing was clear - we should not teach the technique of CAD but how to design using a computer as a medium. Then we specified projects. The first was called "The bathroom I dream of" and meant to be a 2D drawing. The four introductory meetings were in fact teaching foundations of DOS, then a specific design followed with the help of AutoCAD program. In the IX semester, for example, it was "A family house" (plans, facades, perspective). "I have to follow them - I am their leader" said L.J. Peter in "The Peter's Prescription". This quotation reflects exactly the situation we find ourselves in teaching CAAD at our department. It means that ever growing students interest in CAAD made us introduce changes in the curriculum. According to the popular saying, "The more one gets the more one wants", so did we and the students feel after the first semester of teaching CAD. From autumn 1991 CAAD classes will be carried from the third year of studying for two consecutive years. But before further planning one major steep had to be done - we decided to reverse the typical of the seventies approach to the problem when teaching programming languages preceded practical goals hence discouraging many learners.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	9964
authors	Augenbroe, G. and Winkelmann, F.
year	1991
title	Integration of Simulation into the Building Design Process
source	J.A. Clarke, J.W. Mitchell, and R.C. Van de Perre (eds.), Proceedings, Building Simulation '91 IBPSA Conference, pp. 367-374
summary	We describe the need for a joint effort between design researchers and simulation tool developers in formulating procedures and standards for integrating simulation into the building design process. We review and discuss current efforts in the US and Europe in the development of next-generation simulation tools and design integration techniques. In particular, we describe initiatives in object-oriented simulation environments (including the US Energy 'Kernel System, the Swedish Ida system, the UK Energy Kernel System, and the French ZOOM program.) and consider the relationship of these environments to recent R&D initiatives in design integration (the COMBINE project in Europe and the AEDOT project in the US).
series	other
last changed	2003/11/21 15:16

_id	ca50
authors	Ayrle, Hartmut
year	1991
title	XNET2 - Methodical Design of Local Area Networks in Buildings - An Application of the A4 Intelligent Design Tool
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 443-450
summary	XNET2 is a prototype program, that helps network planners to design Ethernet-conform data-networks for sites and buildings. It is implemented as an example application of the ARMILLA4 Intelligent Design Tool under Knowledge Craft. It is based on a knowledge acquisition phase with experts from DECsite, the network-branch of DEC. The ARMILLA Design Tool is developed on the basis of Fritz Haller's ARMILLA ' a set of geometrical and operational rules for the integration of technical ductwork into a building's construction.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	27d2
authors	Ayrle, Hartmut
year	1991
title	Computers for Architects - Only a Tool?
doi	https://doi.org/10.52842/conf.ecaade.1991.x.i9j
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	The paper states that, as a result of the schism between architecture as art and engineering as rationalism, the architectural community underestimates the computer as tool with a potential to substantially enlarge the possibilities of building design. It is claimed that the computer could serve as coordination tool for the ruptured design process, as a virtual workbench where all design disciplines sit together and develop their designs in enhanced conscience of what the whole design demands. The paper then concludes, that to develop such software tools, architects must participate in the development of software and may no longer be restricted to the role of applicants, especially during their universitary instruction. The corresponding research and training facilities at the University of Karlsruhe, Faculty of Architecture are described.
series	eCAADe
last changed	2022/06/07 07:50

_id	4eed
authors	Benedickt, Michael (ed.)
year	1991
title	Cyberspace: First Steps
source	The MIT Press, Cambridge, MA and London, UK
summary	Cyberspace has been defined as "an infinite artificial world where humans navigate in information-based space" and as "the ultimate computer-human interface." These original contributions take up the philosophical basis for cyberspace in virtual realities, basic communications principles, ramifications of cyberspace for future workplaces, and more.
series	other
last changed	2003/04/23 15:14

For more results click below: