Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 204

Reformat results as: short short into frame detailed detailed into frame

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	2f73
authors	Coad, P.and Yourdon, E.
year	1991
title	Object Oriented Analysis
source	2nd. edition, Englewood Cliffs, NJ., Yourdon Press/ Prentice Hall
summary	A step-by-step approach to: defining and communicating system requirements; understanding the application domain in which the user operates; integrating the data and process models; analyzing and specifying systems using self-contained partitioning; gaining leverage through explicit representation of commonality; applying a consistent underlying representation for analysis; and accommodating families of systems.
series	other
last changed	2003/04/23 15:14

_id	cdb1
authors	Cornick, T., Noble, B. and Hallahan, C.
year	1991
title	The Limitations of Current Working Practices on the Development of Computer Integrating Modelling in Construction
source	computer Integrated Future, CIB W78 Seminar. Calibre, The Netherlands: Eindhoven University of Technology, september, 1991. Unnumbered. includes bibliography
summary	For the construction Industry to improve its processes through the application computer-based systems, traditional working practices must first change to support the integrated control of design and construction. Current manual methods of practice accept the limitations of man to process a wide range of building performance and production information simultaneously. However when these limitations are removed, through the applications of computer systems, the constraints of manual methods need no longer apply. The first generation of computer applications to the Construction Industry merely modelled the divided and sequential processes of manual methods i.e. drafting, specification writing, engineering and quantity calculations, estimating, billing, material ordering data-bases and activity planning. Use of these systems raises expectations that connections within the computer between the processes modelled can actually be made and faster and more integrated information processing be achieved. 'Linking' software is then developed. The end result of this approach was that users were able to produce information faster, present it in an impressive manner but, in reality, no perceived improvement in actual building performance, production economy or efficiency was realized. A current government sponsored Teaching Company Programme with a UK design and build company is addressing the problem of how real economic benefit can be realized through improvement in, amongst other things, their existing computer applications. This work is being carried out by both considering an academic conceptual model of how 'designing for production' can be achieved in computer applications and what is immediately realizable in practice by modelling the integration of a limited number of knowledge domains to which computers are already being applied. i.e. billing from design, estimating and buying. This paper describes each area of work and how they are impacting on each other
keywords	construction, building process, integration
series	CADline
last changed	2003/06/02 13:58

_id	6f3e
authors	Eastman, Charles M. and Lang, Jurg
year	1991
title	Experiments in Architectural Design Development Using CAD
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 49-64
summary	The need to explore development techniques in computer-based design is reviewed. Some premises are given for design development using computers, including integrating multiple representations, the use of object-based modeling and the importance of visual analysis and 3-D modeling. We then present techniques used in a UCLA design studio that explored methods of computer-based design development based on these premises. The two main methods used were hierarchical object structures and multi-representational coordination. They were applied using conventional CAD systems. Some lessons learned from this class are reviewed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8658
authors	Matas, Bellot
year	1991
title	BECOC : A Knowledge Bank and its Use in Construction and CAD Systems
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. include some bibliographical references
summary	The Development of the BECOC prototype (Structured Knowledge Bank for Construction Elements) was undertaken in order to test the integration of Data and Knowledge using the SITEC model (Construction Technology Information System). After the graphical definition of a building exterior, the assignment of the construction solutions is dynamically controlled using the Knowledge Bank for real time decision making. To represent the knowledge that acts on the data the knowledge bank consists of an Object Oriented Data Base and a Rule System, developed using the NEXPERT/OBJECT package. In this manner it is possible to establish relationships among properties, concepts, restrictions in values, structural relations and the control of standards compliance, which in this case has been limited to thermal, acoustic and weight requirements. The system helps the user to make decisions and it analyzes the context in order to make the deductions needed to maintain internal data consistency. The positive results of this work indicate the way for further developments, and demonstrate that expert systems and traditional technologies coupled together can be effective and give the desired answers in monitoring design in the everyday problems in construction technology
keywords	construction, expert systems, knowledge base, design, building, envelope, applications, integration, architecture
series	CADline
last changed	2003/06/02 13:58

_id	7508
authors	Montgomery, D.C.
year	1991
title	Design and Analysis of Experiments
source	John Wiley, Chichester
summary	Learn How to Achieve Optimal Industrial Experimentation Through four editions, Douglas Montgomery has provided statisticians, engineers, scientists, and managers with the most effective approach for learning how to design, conduct, and analyze experiments that optimize performance in products and processes. Now, in this fully revised and enhanced Fifth Edition, Montgomery has improved his best-selling text by focusing even more sharply on factorial and fractional factorial design and presenting new analysis techniques (including the generalized linear model). There is also expanded coverage of experiments with random factors, response surface methods, experiments with mixtures, and methods for process robustness studies. The book also illustrates two of today's most powerful software tools for experimental design: Design-Expert(r) and Minitab(r). Throughout the text, You'll find output from these two programs, along with detailed discussion on how computers are currently used in the analysis and design of experiments. You'll also learn how to use statistically designed experiments to: * Obtain information for characterization and optimization of systems * Improve manufacturing processes * Design and develop new processes and products * Evaluate material alternatives in product design * Improve the field performance, reliability, and manufacturing aspects of products * Learn how to conduct experiments effectively and efficiently Other important textbook features: * Student version of Design-Expert(r) software is available. * Web site (www.wiley.com/college/montgomery) offers supplemental text material for each chapter, a sample syllabus, and sample student projects from the author's Design of Experiments course at Arizona State University.
series	other
last changed	2003/04/23 15:14

_id	efa2
authors	Ozel, Filiz
year	1991
title	The Implications of Expert Simulation Approach to the Simulation of Dynamic Process in Architectural Environments
source	CAAD Futures'91 International Conference on Computer Aided Architectural Design Future. June, 1991. includes bibliography
summary	The simulation of dynamic process in architectural environments poses the problem of resolving the interaction of architectural objects with other objects such as humans, water, smoke etc., depending on the process simulated. Objects- oriented approach promises potential in solving this problem. The first part of this paper addresses expert simulation approach within the context of discrete events in architectural settings, then the second part summarizes work done in the application of such an approach to an emergency egress simulation
keywords	architecture, expert systems, simulation, evaluation, objects
series	CADline
last changed	1999/02/12 15:09

_id	29c2
authors	Ozel, Filiz
year	1991
title	An Intelligent Simulation Approach in Simulating Dynamic Processes in Architectural Environments
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 177-190
summary	The implications of object-oriented data models and rule-based reasoning systems is being researched in a wide variety of application areas ranging from VLSI circuit design (Afsannanesh et al 1990) to architectural environments (Coyne et al 1990). The potential of this approach in the development of discrete event simulations is also being scrutinized (Birtwistle et al 1986). Such computer models are usually called "expert simulations" or "intelligent simulations". Typically rule-basing in such models allows the definition of intelligent-objects that can reason about the simulated dynamic processes through an inferencing system. The major advantage of this approach over traditional simulation languages is its ability to provide direct reference to real world objects and processes. The simulation of dynamic processes in architectural environments poses an additional Problem of resolving the interaction of architectural objects with other objects such as humans, water, smoke etc., depending on the process simulated. Object-oriented approach promises potential in solving this specific problem. The first part of this paper addresses expert simulation approach within the context of architectural settings, then the second part summarizes work done in the application of such an approach to an emergency egress simulation.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	f14c
authors	Sariyildiz, Sevil
year	1991
title	Conceptual Design by Means of Islamic-Geometric-Patterns within a CAAD-Environment
source	Delft University of Technology
summary	The starting point in this research was to develop a 3D grammar theory on top of existing 2D Islamic-geometric-patterns, trying to rescue their fundamental geometry contents to be applied in contemporary architecture without compromising any architectural style. As it is self evident the architectural design process consists of clearly distinct stages namely conceptual design, materialisation and further completion. A this conceptual stage the innovative item of the research deals with pattern grammars on 3D complex geometrical patterns, considering them as polyhedra and polytopes, for their use as an underlayer to a concept design, like architects use 2D rectangular and triangular grids by the conventional way. Handling these complex 3D patterns requires a special environment which is possible with CAAD. Within the CAAD environment, the handling of these complex patterns is easily done by means of 3D tools, because the 3D tools permit the user to make any possible manipulations and geometrical transformations in an easier way in space. To a geometrical patterns, there is some attention paid during the last 50 years by some scholars. The most complex geometrical patterns are highly developed in Islamic architecture because it is forbidden in Muslim religion to use man's portraits or sculptures of human beings in the religious buildings. All these approaches to complex patterns are analysed and studied as 2D elements. The question was how could we consider them in 3rd dimensions and use them instead of 2D underlayer, as 3D underlayers in the conceptual phase of the CAAD design. Pattern grammar is a generally employable aid (underlying pattern) for conceptual and material designs. On the basis of rules of symmetry and substitution, ordering principles have been worked out, which can be used for formal design methods as well as detailing systems (e.g. modular coordination). Through the realization of a pattern grammar a wider range of underlying patterns can be offered and a choice from these can be made in a more fundamental manner. At a subsequent stage the collection of "empty boxes" can be filled with (architectural) elements in such a way that another option is created between either filling up the boxes completely, filling them partly, or filling them in such a way that they overflow. It is self-evident that underlying patterns can also be used for details and decoration in a design. Concerning the materialisation of the concept design, within the 3D CAAD environment, substitution methods are partially developed. Further theoretical developments concerning the materialisation phase constantly backed up through feed-back with specialist matters (such as e.g. by means of expert systems, decision-support systems), must be worked out. As feed-back of the research, the possibilities of the design with 3D patterns have been tested and the procedures are explained. () Working with 3D patterns gives a designer more inspirations to develop new ideas and new concepts and gives the opportunity to handle the complexity. () The formal, structural and symmetrical qualities of geometrical patterns has a positive influence on the industrialisation of the building components. (*) Working with 3D tools which are able to handle complex geometry have a result because of the accuracy of the information, that there has hardly been a mistake made during the preparation and the assembly of the building components. This has also positive results concerning the financial aspects of the building process.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	86c1
authors	Shih, Shen-Guan
year	1991
title	Case-based Representation and Adaptation in Design
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 301-312
summary	By attempting to model the raw memory of experts, case-based reasoning is distinguished from traditional expert systems, which compile experts' knowledge into rules before new problems are given. A case-based reasoning system processes new problems with the most similar prior experiences available, and adapts the prior solutions to solve new problems. Case-based representation, of design knowledge utilizes the desirable features of the selected case as syntax rules to adapt the case to a new context. As a central issue of the paper, three types of adaptation aimed at topological modifications are described. The first type - casebased search - can be viewed as a localized search process. It follows the syntactical structure of the case to search for variations which provide the required functionality. Regarding the complexity of computation, it is recognized that when a context sensitive grammar is used to describe the desirable features, the search process become intractable. The second type of adaptation can be viewed as a process of self-organization, in which context-sensitive grammars play an essential role. Evaluations have to be simulated by local interaction among design primitives. The third type is called direct transduction. A case is translated directly to another structure according to its syntax by some translation functions. A direct transduction is not necessarily a composition of design operators and thus, a crosscontextual mapping is possible. As a perspective use of these adaptation methods, a CAD system which provides designers with the ability to modify the syntactical structure of a group of design elements, according to some concerned semantics, would support designers better than current CAD systems.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	9964
authors	Augenbroe, G. and Winkelmann, F.
year	1991
title	Integration of Simulation into the Building Design Process
source	J.A. Clarke, J.W. Mitchell, and R.C. Van de Perre (eds.), Proceedings, Building Simulation '91 IBPSA Conference, pp. 367-374
summary	We describe the need for a joint effort between design researchers and simulation tool developers in formulating procedures and standards for integrating simulation into the building design process. We review and discuss current efforts in the US and Europe in the development of next-generation simulation tools and design integration techniques. In particular, we describe initiatives in object-oriented simulation environments (including the US Energy 'Kernel System, the Swedish Ida system, the UK Energy Kernel System, and the French ZOOM program.) and consider the relationship of these environments to recent R&D initiatives in design integration (the COMBINE project in Europe and the AEDOT project in the US).
series	other
last changed	2003/11/21 15:16

_id	caadria2007_659
id	caadria2007_659
authors	Chen, Zi-Ru
year	2007
title	The Combination of Design Media and Design Creativity _ Conventional and Digital Media
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.w5x
summary	Creativity is always interested in many fields, in particular, creativity and design creativity have many interpretations (Boden, 1991; Gero and Maher, 1992, 1993; Kim, 1990; Sternberg, 1988; Weisberg, 1986). In early conceptual design process, designers used large number of sketches and drawings (Purcell and Gero, 1998). The sketch can inspire the designer to increase the creativity of the designer’s creations(Schenk, 1991; Goldschmidt, 1994; Suwa and Tversky, 1997). The freehand sketches by conventional media have been believed to play important roles in processes of the creative design thinking(Goldschmidt, 1991; Schon and Wiggins, 1992; Goel, 1995; Suwa et al., 2000; Verstijnen et al., 1998; Elsas van and Vergeest, 1998). Recently, there are many researches on inspiration of the design creativity by digital media(Liu, 2001; Sasada, 1999). The digital media have been used to apply the creative activities and that caused the occurrenssce of unexpected discovery in early design processes(Gero and Maher, 1993; Mitchell, 1993; Schmitt, 1994; Gero, 1996, 2000; Coyne and Subrahmanian, 1993; Boden, 1998; Huang, 2001; Chen, 2001; Manolya et al. 1998; Verstijinen et al., 1998; Lynn, 2001). In addition, there are many applications by combination of conventional and digital media in the sketches conceptual process. However, previous works only discussed that the individual media were related to the design creativity. The cognitive research about the application of conceptual sketches design by integrating both conventional and digital media simultaneously is absent.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	39e0
id	39e0
authors	Jablonski, Allen D.
year	1991
title	Integrated Component-based Computer Design Modeling System: The Implications of Control Parameters on the Design Process
source	New Jersey Institute of Technology, Newark, NJ Graduate Thesis - Master's Program College of Architecture
summary	The design process is dependent on a clear order of integrating and managing all of the control parameters that impact on a building's design. All component elements of a building must be defined by their: Physical and functional relations; Quantitative and calculable properties; Component and/or system functions. This requires a means of representation to depict a model of a building that can be viewed and interpreted by a variety of interested parties. These parties need different types of representation to address their individual control parameters, as each component instance has specific implications on all of the control parameters. Representations are prepared for periodic design review either manually through hand-drawn graphics and handcrafted models; or with the aid of computer aided design programs. Computer programs can profoundly increase the speed and accuracy of the process', as well as provide a level of integration, graphic representation and simulation, untenable through a manual process. By maintaining a single control model in an Integrated Component-based Computer Design Modeling System (ICCDMS), interested parties could access the design model at any point during the process. Each party could either: 1. Analyze individual components, or constraints of the model, for interferences against parameters within that party's control; or 2. Explore design alternatives to modify the model, and verify the integration of the components or functions, within the design model, as allowable in relation to other control parameters.
keywords	Architectural Design; Data Processing
series	thesis:MSc
type	extended abstract
email
more	http://www.library.njit.edu/etd/1990s/1990/njit-etd1990-005/njit-etd1990-005.html
last changed	2006/09/25 09:04

_id	a395
authors	Mitchell, W.J., Liggett, R.S., Pollalis, S.N. and Tan, M.
year	1991
title	Integrating Shape Grammars and Design Analysis
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 17-32
summary	This paper demonstrates how design problems can be solved by combining a shape grammar to generate alternatives with standard engineering analysis procedures to test them. It provides a detailed worked example, and discusses practical applications of the idea in design teaching.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8c8c
authors	Richter, Peter
year	1991
title	Integrating Planning Systems
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.t3o
summary	Goals and concepts of integrating different computeraided design and administration systems for many tasks in design and management of buildings were reported from the viewpoint of research and software development. They are presented by example of the ISYBAU-project.
series	eCAADe
last changed	2022/06/07 07:50

_id	a220
authors	Roozenburg, N.F.M. and Cross, N.G.
year	1991
title	Models of the design process: integrating across the disciplines
source	Design Studies, Vol 12, No 4, 215-220
summary	Models of the design process in engineering have converged to a consensus, represented for example by the VDI model. However, after starting from common origins, models of the design process in architectural and industrial design have diverged from the engineering consensus, in response to criticisms from both theorists and practitioners. There now appear to be significant differences between the engineering and architectural/industrial design models. Criticisms of the consensus model of engineering design have also been made, in part reflecting the earlier criticisms of architectural and industrial design models. We discuss the similarities and differences between the two consensus models -- in engineering and architectural/industrial design -- and identify prescriptive versus descriptive emphases. We suggest that attempts should be made to re-integrate the two consensus models, in order to improve education and practice across the disciplines.
series	journal paper
last changed	2003/04/23 15:14

_id	82c6
authors	Sabater, Txatxo
year	1991
title	Learning from Volume Processing
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.o9t
summary	We will expose a kind of chosen curriculum about the activities we have been working on, basically at the Politechnical University of Barcelona Valles School of Architecture. Our activities, in the realm of Apple Macintosh, involve undergraduate students and a Master degree as well. The way we use graphic computers and 3D software has been formulated gradually through a continuous and progressive use. Dedicating work with Apple Macintosh computers doesn't concern to teaching drawing programmes, but we try to "normalize" its use. How? Integrating it in different tasks and suggesting its use in a range of programmes. And, sometimes, letting the visual transcriptions suggest new arguments. The visual system of values developed by the Modernists (now history) and through the mass media, especially photography, cinema, video, are, nowadays, part of our visual language.
series	eCAADe
last changed	2022/06/07 07:50

_id	85f9
authors	Brisson, E., Debras, P. and Poyet, Patrice
year	1991
title	A First Step Towards an Intelligent Integrated Design System in the Building Field
source	computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered pages : ill. includes bibliography
summary	This article presents the work the Knowledge Base Group is achieving towards the integration of Artificial Intelligence based facilities in the Building design process. After an overview of the current state of the integrated design process, the context and the technical guidelines to realize computer integrated software in the building design field is described. Then some tools are presented to model the knowledge (the HBDS method) and to implement such model in our Mips home-made knowledge modeling software platform (including object-oriented database management facilities, expert system reasoning facilities, hypertext edition facilities, 3D-design and 3D-view modules...). Finally the authors describe the Quakes application devoted to assess detached house anti-seismic capabilities during the design process. A deep conceptual model considers all the semantic entities (columns, resistant panels, openings, ...) involved in the anti-seismic expertise. Using both this conceptual model description of a detached house and the 3D design tool, they input the project. Then the seismic expertise is driven in a divide and conquer approach and records the alleged configuration recognized automatically linked to the corresponding section of the building regulation
keywords	AI, design, knowledge, software, integration, building, CAD, structures
series	CADline
last changed	2003/06/02 13:58

For more results click below: