Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 218

Reformat results as: short short into frame detailed detailed into frame

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	9964
authors	Augenbroe, G. and Winkelmann, F.
year	1991
title	Integration of Simulation into the Building Design Process
source	J.A. Clarke, J.W. Mitchell, and R.C. Van de Perre (eds.), Proceedings, Building Simulation '91 IBPSA Conference, pp. 367-374
summary	We describe the need for a joint effort between design researchers and simulation tool developers in formulating procedures and standards for integrating simulation into the building design process. We review and discuss current efforts in the US and Europe in the development of next-generation simulation tools and design integration techniques. In particular, we describe initiatives in object-oriented simulation environments (including the US Energy 'Kernel System, the Swedish Ida system, the UK Energy Kernel System, and the French ZOOM program.) and consider the relationship of these environments to recent R&D initiatives in design integration (the COMBINE project in Europe and the AEDOT project in the US).
series	other
last changed	2003/11/21 15:16

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	c81f
authors	Chandansing, R.A. and Vos, C.J.
year	1991
title	IT - Use in Reinforced Concrete Detailing : The Current State, a Forecasting-Model, and a Future-Concept
source	The Computer Integrated Future, CIB W78 Seminar. september, 1991. Unnumbered : ill., tables. includes bibliography
summary	This paper describes the current state in the Netherlands, concerning the levels of CAD-systems used, their diffusion in practice and constraints and effects of their use for reinforced concrete detailing. An initial forecasting model for the further development of IT in the concrete construction industry and a future-concept for IT-use in reinforced concrete detailing are presented as well
keywords	CAD, structures, engineering, building, practice, systems, detailing, construction
series	CADline
last changed	2003/06/02 13:58

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	a395
authors	Mitchell, W.J., Liggett, R.S., Pollalis, S.N. and Tan, M.
year	1991
title	Integrating Shape Grammars and Design Analysis
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 17-32
summary	This paper demonstrates how design problems can be solved by combining a shape grammar to generate alternatives with standard engineering analysis procedures to test them. It provides a detailed worked example, and discusses practical applications of the idea in design teaching.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	f2f6
authors	Papper, M., Danahy, J. and Baecker, R.
year	1991
title	Predictable Modelling Interaction Using High-Level Constraints: Making Objects Behave As They Would In Our Environment
doi	https://doi.org/10.52842/conf.acadia.1991.211
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 211-222
summary	An approach for a graphical CAD system that is capable of representing physical and geometric aspects of a design using high-level constraints (HLCs) is presented. A prototype spatial planning system incorporating constraints is used in an interactive manner to refine designs by following an iterative approach which uses visual information to evaluate the design at each stage of iteration. High-level constraints aid this iterative approach by influencing (or constraining) the behavior of objects as they are interactively manipulated during the design stage of problem solving. High-level constraints also define the scaling properties of objects which are useful during the construction stage of problem solving. This system and its implications for the design of CAD systems incorporating HLCs are discussed.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	a233
authors	Rosenman, M.A., Gero, J.S. and Oxman, R.E.
year	1991
title	What's in a Case: The Use of Case Bases, Knowledge Bases, and Databases in Design
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 285-300
summary	Design experience can be classified into generalized or compiled knowledge and specific knowledge. Generalized design knowledge has been introduced into computer-aided design in the form of rules, frames and more recently, design prototypes. Case-based reasoning is a well-defined paradigm in artificial intelligence and has obvious scope for its use in design reasoning. This paper explores case-based reasoning in design and argues for the integration of both specific and generalized design knowledge. This integration allows for characterizing what is in a case by drawing upon the schema developed for design prototypes. Finally, the paper argues that the addition of precedent knowledge, in the form of case bases, to knowledge bases and CAD databases will further extend the experience-based capabilities of design systems.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	241f
authors	Van Wyk, C.S.G., Bhat, R., Gauchel, J. and Hartkopf, V.
year	1991
title	A Knowledge-based Approach to Building Design and Performance Evaluation
doi	https://doi.org/10.52842/conf.acadia.1991.001
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 1-14
summary	The introduction of physically-based description and simulation methods to issues of building performance (i.e., acoustic, visual, and air quality; thermal comfort, cost, and long-term system integrity) began in the early 1960s as one of the first examples of computer-aided design in architecture. Since that time, the development of commercially-available computer-aided design systems has largely been oriented towards the visualization and representation of the geometry of buildings, while the development of building performance applications has been concerned with approaches to mathematical and physics-based modeling for predictive purposes.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	2e03
authors	Diederiks, H.J. and van Staveren, R.J.
year	1991
title	Dynamic Information System for Modelling of Design Processes
source	Computer Integrated Future, CIB W78 Seminar. september, 1991
summary	Unnumbered : ill. DINAMO is a Dynamic Information System for Modelling of Design Processes. It is intended for use along with product models, data management systems and existing applications. In DINAMO a programming user can define processes. These processes are represented by graphs. The graphs are characterized by nodes and relations between nodes. Each node in a graph represents a task, and each relation can be restricted to conditions. So the way in which a process is actually being performed, that is, the actual path to be evaluated through the graph, can depend on certain conditions. Processes and functions (=software modules) are available to the user as tasks. A consuming user can activate tasks; the DINAMO system regulates the dispatch of the tasks, conform the process and function definitions. Tasks are collected on sheets; sheets are collected in a task box. A task box can be regarded as a certain environment, determined by the programming user. A consuming user can choose between the environments which are available at that moment. With the DINAMO system software and process definitions can be re-used in a simple way
keywords	design process, modeling, graphs, information, relations, software
series	CADline
last changed	2003/06/02 13:58

_id	7508
authors	Montgomery, D.C.
year	1991
title	Design and Analysis of Experiments
source	John Wiley, Chichester
summary	Learn How to Achieve Optimal Industrial Experimentation Through four editions, Douglas Montgomery has provided statisticians, engineers, scientists, and managers with the most effective approach for learning how to design, conduct, and analyze experiments that optimize performance in products and processes. Now, in this fully revised and enhanced Fifth Edition, Montgomery has improved his best-selling text by focusing even more sharply on factorial and fractional factorial design and presenting new analysis techniques (including the generalized linear model). There is also expanded coverage of experiments with random factors, response surface methods, experiments with mixtures, and methods for process robustness studies. The book also illustrates two of today's most powerful software tools for experimental design: Design-Expert(r) and Minitab(r). Throughout the text, You'll find output from these two programs, along with detailed discussion on how computers are currently used in the analysis and design of experiments. You'll also learn how to use statistically designed experiments to: * Obtain information for characterization and optimization of systems * Improve manufacturing processes * Design and develop new processes and products * Evaluate material alternatives in product design * Improve the field performance, reliability, and manufacturing aspects of products * Learn how to conduct experiments effectively and efficiently Other important textbook features: * Student version of Design-Expert(r) software is available. * Web site (www.wiley.com/college/montgomery) offers supplemental text material for each chapter, a sample syllabus, and sample student projects from the author's Design of Experiments course at Arizona State University.
series	other
last changed	2003/04/23 15:14

_id	aefc
authors	Van Zutphen, R., De Vries, M. and Wagter, Harry
year	1991
title	The Development of an Architects Oriented Product Model
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991
summary	Unnumbered : ill. includes bibliography. In this paper various aspects of the development and introduction of product-models in the building industry are discussed. Management and design information are discussed more in depth
keywords	product modeling, architecture, building, database, management, information
series	CADline
last changed	2003/06/02 13:58

_id	403a
authors	Karstila, K., Björk, B.C. and Hannus, M.
year	1991
title	A Conceptual Framework for Design and Construction Information
source	The Computer Integrated Future, CIB W78 Seminar. september, 1991. Unnumbered : ill. includes bibliography
summary	This paper tries to sketch out a conceptual framework model for design and construction information. This conceptual model is formed by extending the Finnish RATAS building product data model to include also construction activities, resources, costs, organizations, contracts, etc. and relationships between them. The overall conceptual framework model can be used to extract conceptual submodels related to the information needs of particular participants of the construction process. As an example of different views to design and construction information the views of design, cost estimating and production planning discussed in the paper. The framework model can also be used to define the position of traditional classification systems and general databases in the construction information process
keywords	construction, product modeling, building, information, design process
series	CADline
email
last changed	2003/06/02 14:41

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	673a
authors	Fukuda, T., Nagahama, R. and Sasada, T.
year	1997
title	Networked Interactive 3-D design System for Collaboration
doi	https://doi.org/10.52842/conf.caadria.1997.429
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 429-437
summary	The concept of ODE (Open Design Environment) and corresponding system were presented in 1991. Then the new concept of NODE. which is networked version of ODE. was generated to make wide area collaboration in 1994. The aim of our research is to facilitate the collaboration among the various people involved in the design process of an urban or architectural project. This includes various designers and engineers, the client and the citizens who may be affected by such a project. With the new technologies of hyper medium, network, and component architecture, we have developed NODE system and applied in practical use of the collaboration among the various people. This study emphasizes the interactive 3-D design tool of NODE which is able to make realistic and realtime presentation with interactive interface. In recent years, ProjectFolder of NODE system, which is a case including documents, plans, and tools to proceed project., is created in the World Wide Web (WWW) and makes hyper links between a 3-D object and a text, an image. and other digital data.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	b0e0
authors	Martens, Bob
year	1991
title	THE ERECTION OF A FULL-SCALE LABORATORY AT THE TECHNICAL UNIVERSITY OF VIENNA
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 44-52
summary	Since 1977 the Institut für Raumgestaltung ('Architectural Styling of Space') had been trying to set up a full-scale laboratory designed for teaching and research purposes. The aim was even more so invigorated by the International Architecture Symposion "Man and Architectural Space" organized by our institute (1984).
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:17

_id	2ecf
authors	Oxman, R. and Oxman, R.
year	1991
title	Building Form Modelling in Architectural Design Education
doi	https://doi.org/10.52842/conf.ecaade.1991.x.k4c
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	The paper describes an approach to architectural design education within the tradition of grammatical studies. It exploits certain attributes of computer modelling and computer graphics programs as an environment to convey architectural knowledge. The formal representation of designs and the manipulation of these representations are proposed as architectural knowledge and one of the foundations of design. Computer-based three-dimensional formal analysis of designs is employed as a technique for the acquisition of knowledge of classes of designs. Through formal analysis certain general models of building form are postulated. The classes of building form models in architecture are elaborated, and their relation to the concept of architectural syntax is discussed. The computational significance of building form modelling is considered, and the relevance of formal modelling in design education is discussed.
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: