Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 217

Reformat results as: short short into frame detailed detailed into frame

_id	eaca
authors	Davis, L. (ed.)
year	1991
title	Handbook of genetic algorithms
source	Van Nostrand Reinhold, New York
summary	This book sets out to explain what genetic algorithms are and how they can be used to solve real-world problems. The first objective is tackled by the editor, Lawrence Davis. The remainder of the book is turned over to a series of short review articles by a collection of authors, each explaining how genetic algorithms have been applied to problems in their own specific area of interest. The first part of the book introduces the fundamental genetic algorithm (GA), explains how it has traditionally been designed and implemented and shows how the basic technique may be applied to a very simple numerical optimisation problem. The basic technique is then altered and refined in a number of ways, with the effects of each change being measured by comparison against the performance of the original. In this way, the reader is provided with an uncluttered introduction to the technique and learns to appreciate why certain variants of GA have become more popular than others in the scientific community. Davis stresses that the choice of a suitable representation for the problem in hand is a key step in applying the GA, as is the selection of suitable techniques for generating new solutions from old. He is refreshingly open in admitting that much of the business of adapting the GA to specific problems owes more to art than to science. It is nice to see the terminology associated with this subject explained, with the author stressing that much of the field is still an active area of research. Few assumptions are made about the reader's mathematical background. The second part of the book contains thirteen cameo descriptions of how genetic algorithmic techniques have been, or are being, applied to a diverse range of problems. Thus, one group of authors explains how the technique has been used for modelling arms races between neighbouring countries (a non- linear, dynamical system), while another group describes its use in deciding design trade-offs for military aircraft. My own favourite is a rather charming account of how the GA was applied to a series of scheduling problems. Having attempted something of this sort with Simulated Annealing, I found it refreshing to see the authors highlighting some of the problems that they had encountered, rather than sweeping them under the carpet as is so often done in the scientific literature. The editor points out that there are standard GA tools available for either play or serious development work. Two of these (GENESIS and OOGA) are described in a short, third part of the book. As is so often the case nowadays, it is possible to obtain a diskette containing both systems by sending your Visa card details (or $60) to an address in the USA.
series	other
last changed	2003/04/23 15:14

_id	241f
authors	Van Wyk, C.S.G., Bhat, R., Gauchel, J. and Hartkopf, V.
year	1991
title	A Knowledge-based Approach to Building Design and Performance Evaluation
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 1-14
doi	https://doi.org/10.52842/conf.acadia.1991.001
summary	The introduction of physically-based description and simulation methods to issues of building performance (i.e., acoustic, visual, and air quality; thermal comfort, cost, and long-term system integrity) began in the early 1960s as one of the first examples of computer-aided design in architecture. Since that time, the development of commercially-available computer-aided design systems has largely been oriented towards the visualization and representation of the geometry of buildings, while the development of building performance applications has been concerned with approaches to mathematical and physics-based modeling for predictive purposes.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ga9921
id	ga9921
authors	Coates, P.S. and Hazarika, L.
year	1999
title	The use of genetic programming for applications in the field of spatial composition
source	International Conference on Generative Art
summary	Architectural design teaching using computers has been a preoccupation of CECA since 1991. All design tutors provide their students with a set of models and ways to form, and we have explored a set of approaches including cellular automata, genetic programming ,agent based modelling and shape grammars as additional tools with which to explore architectural ( and architectonic) ideas.This paper discusses the use of genetic programming (G.P.) for applications in the field of spatial composition. CECA has been developing the use of Genetic Programming for some time ( see references ) and has covered the evolution of L-Systems production rules( coates 1997, 1999b), and the evolution of generative grammars of form (Coates 1998 1999a). The G.P. was used to generate three-dimensional spatial forms from a set of geometrical structures .The approach uses genetic programming with a Genetic Library (G.Lib) .G.P. provides a way to genetically breed a computer program to solve a problem.G. Lib. enables genetic programming to define potentially useful subroutines dynamically during a run .* Exploring a shape grammar consisting of simple solid primitives and transformations. * Applying a simple fitness function to the solid breeding G.P.* Exploring a shape grammar of composite surface objects. * Developing grammarsfor existing buildings, and creating hybrids. * Exploring the shape grammar of abuilding within a G.P.We will report on new work using a range of different morphologies ( boolean operations, surface operations and grammars of style ) and describe the use of objective functions ( natural selection) and the "eyeball test" ( artificial selection) as ways of controlling and exploring the design spaces thus defined.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	2e03
authors	Diederiks, H.J. and van Staveren, R.J.
year	1991
title	Dynamic Information System for Modelling of Design Processes
source	Computer Integrated Future, CIB W78 Seminar. september, 1991
summary	Unnumbered : ill. DINAMO is a Dynamic Information System for Modelling of Design Processes. It is intended for use along with product models, data management systems and existing applications. In DINAMO a programming user can define processes. These processes are represented by graphs. The graphs are characterized by nodes and relations between nodes. Each node in a graph represents a task, and each relation can be restricted to conditions. So the way in which a process is actually being performed, that is, the actual path to be evaluated through the graph, can depend on certain conditions. Processes and functions (=software modules) are available to the user as tasks. A consuming user can activate tasks; the DINAMO system regulates the dispatch of the tasks, conform the process and function definitions. Tasks are collected on sheets; sheets are collected in a task box. A task box can be regarded as a certain environment, determined by the programming user. A consuming user can choose between the environments which are available at that moment. With the DINAMO system software and process definitions can be re-used in a simple way
keywords	design process, modeling, graphs, information, relations, software
series	CADline
last changed	2003/06/02 13:58

_id	ad7b
authors	Hannus, Matti
year	1991
title	Implementation of Object Oriented Product Model Applications
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. includes bibliography
summary	The paper describes implementation aspects of object oriented applications using different software tools such as a CAD- system, a relational data base management system and an object oriented programming language. The different implementations are based on a common generic product model and are integrated by means of neutral file transfer. The modules make up a toolbox from which various specific applications can be derived by adding application specific subclasses. The described development aims to provide steps along an evolutionary path from the dominating design tools of today towards the envisioned object oriented systems of tomorrow
keywords	integration, OOPS, CAD, product modeling
series	CADline
last changed	1999/02/12 15:08

_id	a40d
authors	Paoluzzi, Alberto and Sansoni, Claudio
year	1991
title	Solid Modeling of Architectural Design with PLASM Language
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 203-224
summary	PLASM (Programming LAnguage for Solid Modeling) is a prototype, high level, user oriented, functional design language currently being developed at the University of Rome "La Sapienza". A PLASM "program" is the symbolic definition of a complex of variational polyhedra depending on some unbound variable, and therefore allows for the description of a whole set of geometric solutions to a design problem. In our view the language should be used, possibly with the assistance of a graphical user interface, both in the first steps of the design process as well in the detailed design. In the paper the guide-lines are shown for the preliminary definition of the syntax of the language. The paper also contains the definition of some new and very powerful solid operators.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	0e34
authors	Rumbaugh J., Blaha M., Premerlani W., Eddy F., Lorenson W.
year	1991
title	Object-Oriented Modelling and Design
source	Englewood Cliffs, NJ: Prentice Hall
summary	Object-oriented modelling and design promote better understanding of requirements, cleaner designs and more maintainable systems. Often, books on related subjects rely on programming and coding, forcing readers to think in terms of the computer, and not the application. "Object-oriented Modeling and Design" emphasizes that object-oriented technology is more that just a way of programming. It applies techniques to the entire software development cycle. This volume presents a new object-oriented software development methodology - from analysis, through design, to implementation. Key features of the book include a focus on high-level, front-end conceptual processes of analysis and design, rather than just on the low-level, back-end implementation steps of programming; coverage of the entire development life cycle - analysis, design, implementation without a change of notation at each stage; a presentation of graphical notation and methodology independent of any particular programming language; case studies of industrial object-oriented applications developed by the authors; and examples and exercises that bring out fine points, summary lists of concepts and methodology steps, and almost 300 diagrams.
series	other
last changed	2003/04/23 15:14

_id	8b1e
authors	Blinn, James F.
year	1991
title	A Trip Down the Graphics Pipeline: Line Clipping
source	IEEE Computer Graphics and Applications January, 1991. vol. 11: pp. 98-105 : ill. includes bibliography.
summary	The classic computer graphics pipeline is an assembly-line like process that geometric objects must experience on their journey to becoming pixels on the screen. This is a first of a series of columns on the graphics pipeline. In this column the author concentrate on the algorithm aspects of the line- clipping part of the pipeline
keywords	clipping, algorithms, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	fd70
authors	Goldman, Glenn and Zdepski, Michael Stephen (Eds.)
year	1991
title	Reality and Virtual Reality [Conference Proceedings]
source	ACADIA Conference Proceedings / ISBN 1-880250-00-4 / Los Angeles (California - USA) October 1991, 236 p.
doi	https://doi.org/10.52842/conf.acadia.1991
summary	During the past ten years computers in architecture have evolved from machines used for analytic and numeric calculation, to machines used for generating dynamic images, permitting the creation of photorealistic renderings, and now, in a preliminary way, permitting the simulation of virtual environments. Digital systems have evolved from increasing the speed of human operations, to providing entirely new means for creating, viewing and analyzing data. The following essays illustrate the growing spectrum of computer applications in architecture. They discuss developments in the simulation of future environments on the luminous screen and in virtual space. They investigate new methods and theories for the generation of architectural color, texture, and form. Authors address the complex technical issues of "intelligent" models and their associated analytic contents. There are attempts to categorize and make accessible architects' perceptions of various models of "reality". Much of what is presented foreshadows changes that are taking place in the areas of design theory, building sciences, architectural graphics, and computer research. The work presented is both developmental, evolving from the work done before or in other fields, and unique, exploring new themes and concepts. The application of computer technology to the practice of architecture has had a cross disciplinary effect, as computer algorithms used to generate the "unreal" environments and actors of the motion picture industry are applied to the prediction of buildings and urban landscapes not yet in existence. Buildings and places from history are archeologically "re-constructed" providing digital simulations that enable designers to study that which has previously (or never) existed. Applications of concepts from scientific visualization suggest new methods for understanding the highly interrelated aspects of the architectural sciences: structural systems, environmental control systems, building economics, etc. Simulation systems from the aerospace industry and computer media fields propose new non-physical three-dimensional worlds. Video compositing technology from the television industry and the practice of medicine are now applied to the compositing of existing environments with proposed buildings. Whether based in architectural research or practice, many authors continue to question the development of contemporary computer systems. They seek new interfaces between human and machine, new methods for simulating architectural information digitally, and new ways of conceptualizing the process of architectural design. While the practice of architecture has, of necessity, been primarily concerned with increasing productivity - and automation for improved efficiency, it is clear that university based studies and research continue to go beyond the electronic replication of manual tasks and study issues that can change the processes of architectural design - and ultimately perhaps, the products.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	2b39
authors	Duarte, Rovenir Bertola
year	2000
title	O Uso do Computador no Ensino de Projeto: (por) uma Avaliação (Or Use do Computer nonEnsino de Project: (by) uma Avaliaction)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 361-363
summary	The computer approaches to the discipline of project near the fifties, with the idea that all the systems and processes can be object of mathematical simulation. However in the last times, the computers were used more in drawings than in the projects, “CADrafting is uncommon (...) and CADesign is almost nonexistent...” (STEVEN, 1991). At the same time it happened a surprising approach with to architecture schools. It stimulated more methodological approaches, and the subject moved, placing the computer as element transformer. The computers have really been changing the production and generation of documents, but the question is if it has been altering the method or process of elaboration of ideas. After so much search in direction to the computers it is time of thinking what was gotten with them and the problems that accompanies him. The work search to discuss the subjects where the computer influences in the learning and the students’ development.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2007_073
id	ecaade2007_073
authors	Francis, Sabu
year	2007
title	Web Based Collaborative Architectural Practice Using a Fractal System
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 727-734
doi	https://doi.org/10.52842/conf.ecaade.2007.727
summary	I have been working on an architecture representation system in India since 1991; that markedly deviates from the need of traditional drawings as we know. Over three million square feet of work has been done that took advantage of this system as it was being developed. The system has now matured sufficiently to be put into practice as a comprehensive architectural system of practice. It takes advantage of creation of just-in-time dynamic multi-organizations that can get formed (and dismantled) over the Internet on a project to project basis. The raison d’être of the representation system is that it would expose the “source-code” (metaphorically) of any work of architecture to stakeholders, much the same way as an open-source software project exposes the internal representation to fellow developers. I believe the design of architecture must go through an “open source” process in order to produce socially responsible designs. Such a stance is explained in this paper. The paper also explains the system in detail; its mathematical basis and justifies the need for such an approach. It also explores how a collaborative practice can be put into place using the system in the context of Internet technologies.
keywords	Collaborative practice, fractals, representation system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	46ce
id	46ce
authors	Gero, J. S.
year	1991
title	Ten problems for AI in design
source	Workshop on AI in Design, IJCAI-91, un-numbered
summary	Modern design research dates back to the end of the eighteenth century when French theorists attempted to describe design as a process. The notion of process in design dates back to the Roman engineer/architect/writer Vitruvius who described both process and performance aspects of designing. Since the 1940s there has been a variety of attempts to provide formal models of design ranging from prescriptive algorithmic-like descriptions through mathematical model and systems theoretic descriptions to the current paradigm based on the precepts and notions of artificial intelligence. All of these, including the current work, is primarily concerned with treating the process aspects of design.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:38

_id	a620
authors	Asanowicz, Alexander
year	1991
title	Unde et Quo
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.t1s
summary	To begin with, I would like to say a few words about the problem of alienation of modern technologies which we also inevitably faced while starting teaching CAD at our department. Quite often nowadays a technology becomes a fetish as a result of lack of clear goals in human mind. There are multiple technologies without sense of purpose which turned into pure experiments. There is always the danger of losing purposeness and drifting toward alienation. The cause of the danger lies in forgetting about original goals while mastering and developing the technology. Eventually the original idea is ignored and a great gap appears between technical factors and creativity. We had the danger of alienation in mind when preparing the CAAD curriculum. Trying to avoid the tension between technical and creative elements we agreed not to introduce CAD too soon then the fourth year of studies and continue it for two semesters. One thing was clear - we should not teach the technique of CAD but how to design using a computer as a medium. Then we specified projects. The first was called "The bathroom I dream of" and meant to be a 2D drawing. The four introductory meetings were in fact teaching foundations of DOS, then a specific design followed with the help of AutoCAD program. In the IX semester, for example, it was "A family house" (plans, facades, perspective). "I have to follow them - I am their leader" said L.J. Peter in "The Peter's Prescription". This quotation reflects exactly the situation we find ourselves in teaching CAAD at our department. It means that ever growing students interest in CAAD made us introduce changes in the curriculum. According to the popular saying, "The more one gets the more one wants", so did we and the students feel after the first semester of teaching CAD. From autumn 1991 CAAD classes will be carried from the third year of studying for two consecutive years. But before further planning one major steep had to be done - we decided to reverse the typical of the seventies approach to the problem when teaching programming languages preceded practical goals hence discouraging many learners.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	a1dc
authors	Budd, T.
year	1991
title	An introduction to Object Oriented programming
source	Addison-Wesley
summary	In An Introduction to Object-Oriented Programming, Timothy Budd provides a language-independent presentation of object-oriented principles, such as objects, methods, inheritance (including multiple inheritance) and polymorphism. Examples are drawn from several different languages, including (among others) C++, C#, Java, CLOS, Delphi, Eiffel, Objective-C and Smalltalk. By examining many languages, the reader is better able to appreciate the general principles that lie beyond the syntax of the individual languages.
series	other
last changed	2003/04/23 15:14

_id	c886
authors	Graham, Ian
year	1991
title	Object oriented methods
source	Addison Wesley
summary	This is another book aimed at helping those making decisions to arrive at better informed ones. This is a second (and substantially updated)edition of a book that was deservedly well reviewed when it was originally published. Those who have to give advice on the choice of any aspect of OO technology from design to programming and testing will know that they are faced with attempting to make decisions based on ill-informed and often biased sources of information. Ian Graham attempts to survey the whole field, laying out your choices for you rather than making them for you. In each aspect of the subject the result of reading Object-Oriented Methods will be to allow you to reach decisions based on an understanding of the problems and the current range of tools aimed at helping you solve them. If you have a serious decision to make this would be a good place to start before proceeding to a more detailed investigation of what seem the potentially best choices for you and your needs. The other group of people who will benefit from reading this book are those that want or need a general overview of the OO arena. This is a good text that should be read by students of Computing, those who recognise that good advice is based on a comprehensive knowledge of the field and those who have to make a practical commercial decision about which OO route to take.
series	other
last changed	2003/04/23 15:14

_id	01c8
authors	Gross, Mark D.
year	1991
title	Programming 2-Way Constraints in CODRAW
source	1991. [8] p. : ill. includes bibliography
summary	Constraints based drawing programs require users to understand and manage relationships between drawing elements. By establishing constraint relationship among elements the user effectively programs the drawing's behavior. This programming task requires a more sophisticated visual interface than conventional drawing programs provide. Users must have available - in a convenient format - information about the structure of the constraints that determine the drawing's interactive edit behavior. This format must support editing and debugging. CoDraw is a constraint based drawing program that can be interactively extended by its users. This paper describes the CoDraw program and its programming interface
keywords	constraints, drafting, user interface
series	CADline
last changed	2003/06/02 10:24

_id	84d6
authors	Schreuder, Eric and Sanquist, Nancy J.
year	1991
title	How to Implement a CAD Database Interface
source	MCN. April, 1991. vol. 6: pp. 62-64 : ill
summary	A CAD database interface means that elements from two different types of computer databases are being connected for a single purpose. Graphic elements in the CAD database are being linked with alphanumeric elements in a DBMS. The article describes how to create the interface
keywords	integration, CAD, database, programming
series	CADline
last changed	2003/06/02 10:24

_id	61e0
authors	Streich, Bernd
year	1992
title	Should We Integrate Programming Knowledge into the Architect's CAAD-Education? Basic Considerations and Experiences from Kaiserslautern
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 399-409
doi	https://doi.org/10.52842/conf.ecaade.1992.399
summary	At the ECAADE-congress 1991 in Munich, the teaching concept of computer-aided architectural design of the faculty of architecture and environmental/urban planning at the University of Kaiserslautern has been presented. On that occasion, this brought about the question whether the curriculum should include programming knowledge. In this paper, the discussion shall be taken up again with several arguments in favour of the computer programming instruction. At first, a survey of the current discussion of the subject shall be given, then there will follow some reflections on the theoretical relationship between designing and programming, and finally, examples from the teaching experience in Kaiserslautern will be presented.
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: