Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 199

Reformat results as: short short into frame detailed detailed into frame

_id	ead3
authors	Meinecke, Christoph and Scherer, Raimar J.
year	1991
title	Architecture of a Knowledge- Based -System for the Detailing of Reinforced Concrete Columns
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 451-464
summary	This paper presents the hypothesis part of an expert-system for detailing reinforced concrete structures. The structural members on which the work is focused are columns. To generate a hypothesis - that means to configurate the reinforcement for a given structural member with an almost fixed geometry - needs different kinds of information, i.e. knowledge and a strategy to apply this knowledge. Therefore a hybrid system is chosen which combines object oriented organization to represent the fixed knowledge and a rule base to model the strategy and the dynamic knowledge.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	29c2
authors	Ozel, Filiz
year	1991
title	An Intelligent Simulation Approach in Simulating Dynamic Processes in Architectural Environments
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 177-190
summary	The implications of object-oriented data models and rule-based reasoning systems is being researched in a wide variety of application areas ranging from VLSI circuit design (Afsannanesh et al 1990) to architectural environments (Coyne et al 1990). The potential of this approach in the development of discrete event simulations is also being scrutinized (Birtwistle et al 1986). Such computer models are usually called "expert simulations" or "intelligent simulations". Typically rule-basing in such models allows the definition of intelligent-objects that can reason about the simulated dynamic processes through an inferencing system. The major advantage of this approach over traditional simulation languages is its ability to provide direct reference to real world objects and processes. The simulation of dynamic processes in architectural environments poses an additional Problem of resolving the interaction of architectural objects with other objects such as humans, water, smoke etc., depending on the process simulated. Object-oriented approach promises potential in solving this specific problem. The first part of this paper addresses expert simulation approach within the context of architectural settings, then the second part summarizes work done in the application of such an approach to an emergency egress simulation.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	ea6b
authors	Boeve, Eddy
year	1991
title	Modelling Interaction Tools in the Views Architecture IV. Design Tools
source	First Moscow International HCI'91 Workshop Proceedings 1991 p.183
summary	Views is a user-interface system in which the user interface is a layer above applications, guaranteeing consistency of the interface, and with a data-layer implementing external object representations, allowing exchange of objects between applications without loss of structure. Although Views offers an architecture to deal with user-interface aspects on a high level, in this report is shown that also low level interaction can be modelled with the architecture provided.
series	other
last changed	2002/07/07 16:01

_id	c886
authors	Graham, Ian
year	1991
title	Object oriented methods
source	Addison Wesley
summary	This is another book aimed at helping those making decisions to arrive at better informed ones. This is a second (and substantially updated)edition of a book that was deservedly well reviewed when it was originally published. Those who have to give advice on the choice of any aspect of OO technology from design to programming and testing will know that they are faced with attempting to make decisions based on ill-informed and often biased sources of information. Ian Graham attempts to survey the whole field, laying out your choices for you rather than making them for you. In each aspect of the subject the result of reading Object-Oriented Methods will be to allow you to reach decisions based on an understanding of the problems and the current range of tools aimed at helping you solve them. If you have a serious decision to make this would be a good place to start before proceeding to a more detailed investigation of what seem the potentially best choices for you and your needs. The other group of people who will benefit from reading this book are those that want or need a general overview of the OO arena. This is a good text that should be read by students of Computing, those who recognise that good advice is based on a comprehensive knowledge of the field and those who have to make a practical commercial decision about which OO route to take.
series	other
last changed	2003/04/23 15:14

_id	ad7b
authors	Hannus, Matti
year	1991
title	Implementation of Object Oriented Product Model Applications
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. includes bibliography
summary	The paper describes implementation aspects of object oriented applications using different software tools such as a CAD- system, a relational data base management system and an object oriented programming language. The different implementations are based on a common generic product model and are integrated by means of neutral file transfer. The modules make up a toolbox from which various specific applications can be derived by adding application specific subclasses. The described development aims to provide steps along an evolutionary path from the dominating design tools of today towards the envisioned object oriented systems of tomorrow
keywords	integration, OOPS, CAD, product modeling
series	CADline
last changed	1999/02/12 15:08

_id	8658
authors	Matas, Bellot
year	1991
title	BECOC : A Knowledge Bank and its Use in Construction and CAD Systems
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. include some bibliographical references
summary	The Development of the BECOC prototype (Structured Knowledge Bank for Construction Elements) was undertaken in order to test the integration of Data and Knowledge using the SITEC model (Construction Technology Information System). After the graphical definition of a building exterior, the assignment of the construction solutions is dynamically controlled using the Knowledge Bank for real time decision making. To represent the knowledge that acts on the data the knowledge bank consists of an Object Oriented Data Base and a Rule System, developed using the NEXPERT/OBJECT package. In this manner it is possible to establish relationships among properties, concepts, restrictions in values, structural relations and the control of standards compliance, which in this case has been limited to thermal, acoustic and weight requirements. The system helps the user to make decisions and it analyzes the context in order to make the deductions needed to maintain internal data consistency. The positive results of this work indicate the way for further developments, and demonstrate that expert systems and traditional technologies coupled together can be effective and give the desired answers in monitoring design in the everyday problems in construction technology
keywords	construction, expert systems, knowledge base, design, building, envelope, applications, integration, architecture
series	CADline
last changed	2003/06/02 13:58

_id	ef46
authors	Petrovic, I.
year	1991
title	Integrative Knowledge-Based Design Systems : A View
source	The Computer Integrated Future, CIB W78 Seminar September, 1991. Unnumbered : ill. includes bibliography.
summary	The paper describes a recent project whose objective was to redesign GIMSEX-PERT, an existing architectural knowledge- based design system developed in 1987. Its critical generative problems appeared to be the rigid structure and limited evaluation criteria. The project's outcome is DESTOOLS, based on the 'object-oriented-methodology' inspired by the traditional trial-and-error approach. It includes a set of interchangeable design methods that can be applied interactively by any desired sequence, producing or transforming a GIMS Building System object. Such 'moderately- loose' system structure offers flexibility in use, avoids pitfalls of knowledge-based design systems with rigid structure, and is applicable in design research, education and practice
keywords	knowledge base, design, architecture, methods, systems, education, practice, integration, evaluation
series	CADline
last changed	2003/06/02 13:58

_id	4196
authors	Pols, Albert A.J.
year	1991
title	Conceptual Modelling of Building Assemblies : Bridging the Gap Between Building Data and Design Integrity
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : ill. includes bibliography
summary	Improved models and methods for building representation are needed for more effective support of design integrity checking and control. A 'generic' object-oriented approach to product modelling allows multiple design representations to be described as different views of a common, gradually evolving building product model. The product model provides the capability to generate, in successive design iterations, a coherent description of the form, structure and dimensions of the building and its assemblies and components. Associated technological and administrative data can be included in or associated with the product description
keywords	product modeling, building, database, semantics, integration
series	CADline
last changed	2003/06/02 13:58

_id	0e34
authors	Rumbaugh J., Blaha M., Premerlani W., Eddy F., Lorenson W.
year	1991
title	Object-Oriented Modelling and Design
source	Englewood Cliffs, NJ: Prentice Hall
summary	Object-oriented modelling and design promote better understanding of requirements, cleaner designs and more maintainable systems. Often, books on related subjects rely on programming and coding, forcing readers to think in terms of the computer, and not the application. "Object-oriented Modeling and Design" emphasizes that object-oriented technology is more that just a way of programming. It applies techniques to the entire software development cycle. This volume presents a new object-oriented software development methodology - from analysis, through design, to implementation. Key features of the book include a focus on high-level, front-end conceptual processes of analysis and design, rather than just on the low-level, back-end implementation steps of programming; coverage of the entire development life cycle - analysis, design, implementation without a change of notation at each stage; a presentation of graphical notation and methodology independent of any particular programming language; case studies of industrial object-oriented applications developed by the authors; and examples and exercises that bring out fine points, summary lists of concepts and methodology steps, and almost 300 diagrams.
series	other
last changed	2003/04/23 15:14

_id	87bb
authors	Turk, Ziga
year	1991
title	Integration of Existing Programs Using Frames
source	The Computer Integrated Future, CIB W78 Seminar September, 1991. Unnumbered : ill. includes bibliography.
summary	A prototype for computer integrated design/analysis environment is being developed. Due to the nature and size of the author's institution, he opted for compatibility with existing and third party products as well for future developments. Frames are used in Minsky's sense to insulate knowledge and semantics of the tools being integrated. Frames are used again in a more traditional sense insulating components physically. Standards like STEP or AIS were not applied explicitly, but principles behind those standards are reflected in the solution. In the paper an architecture of shallow integration of the tools for integrated structural design is explained in greater detail. Some of the solutions are suggested from the blending of the Object Oriented approach and AI techniques
keywords	integration, systems, frames, building, OOPS, AI
series	CADline
last changed	1999/02/12 15:09

_id	a40d
authors	Paoluzzi, Alberto and Sansoni, Claudio
year	1991
title	Solid Modeling of Architectural Design with PLASM Language
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 203-224
summary	PLASM (Programming LAnguage for Solid Modeling) is a prototype, high level, user oriented, functional design language currently being developed at the University of Rome "La Sapienza". A PLASM "program" is the symbolic definition of a complex of variational polyhedra depending on some unbound variable, and therefore allows for the description of a whole set of geometric solutions to a design problem. In our view the language should be used, possibly with the assistance of a graphical user interface, both in the first steps of the design process as well in the detailed design. In the paper the guide-lines are shown for the preliminary definition of the syntax of the language. The paper also contains the definition of some new and very powerful solid operators.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	82a2
authors	Streich, Bernd
year	1991
title	The Conception of Education in CAD
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
doi	https://doi.org/10.52842/conf.ecaade.1991.x.p4b
summary	In February 1990 the University of Kaiserslautern founded the new teaching and research department "Computer-Aided Design and Construction in Environmental Planning and Architecture". Unlike other German universities, the speciality of the new teaching department is in the common education of architects and environmental planners (including urban planning), so that a wide range of computer systems is at their disposal: computer-aided architectural design systems just as geographic information systems, picture processing or information systems to support urban planning etc. No other German university disposes of this kind of common education in a single teaching department. The following aspects will be discussed: (-) The general concept of education in three dimensions, viz. a dimension of application concerning architecture and urban planning, a dimension of technical features concerning computer applications and a dimension of critical judgement. (-) Contents of education and teaching concept including examples and students' resonance. (-) Research fields in urban planning and architecture which are necessary for a practical-oriented education concept. (-) Experience with the educational background furnished by the students of architecture and environmental planning and general consequences for the teaching concept.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	c455
authors	Sumption, Brian, Haglund, Bruce and Zabrodsky, Alexander
year	1991
title	Imagining Light: A Visualization of Daylighting Data
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 97-104
summary	The task of designing effective lighting for buildings requires both artistic and technical competence. In this way it is archetypical of the discipline of architectural design. The interaction of buildings with solar lighting is complex and ever-changing. Added complexity comes with the use of electric lights and their daylight-sensitive control systems. State-of-the-art daylight prediction tools most often provide precision data that is in obscure numerical formats hindering the communication and perception of information hidden within. We are exploring the use of scientific visualization to transform incomprehensible tables of data into images that visually oriented designers will find more accessible. By representing lighting data and their interactions with the environment visually, students and design professionals may be able to "imagine the light" in ways that will help them understand and solve complex lighting design problems.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	241f
authors	Van Wyk, C.S.G., Bhat, R., Gauchel, J. and Hartkopf, V.
year	1991
title	A Knowledge-based Approach to Building Design and Performance Evaluation
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 1-14
doi	https://doi.org/10.52842/conf.acadia.1991.001
summary	The introduction of physically-based description and simulation methods to issues of building performance (i.e., acoustic, visual, and air quality; thermal comfort, cost, and long-term system integrity) began in the early 1960s as one of the first examples of computer-aided design in architecture. Since that time, the development of commercially-available computer-aided design systems has largely been oriented towards the visualization and representation of the geometry of buildings, while the development of building performance applications has been concerned with approaches to mathematical and physics-based modeling for predictive purposes.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	9964
authors	Augenbroe, G. and Winkelmann, F.
year	1991
title	Integration of Simulation into the Building Design Process
source	J.A. Clarke, J.W. Mitchell, and R.C. Van de Perre (eds.), Proceedings, Building Simulation '91 IBPSA Conference, pp. 367-374
summary	We describe the need for a joint effort between design researchers and simulation tool developers in formulating procedures and standards for integrating simulation into the building design process. We review and discuss current efforts in the US and Europe in the development of next-generation simulation tools and design integration techniques. In particular, we describe initiatives in object-oriented simulation environments (including the US Energy 'Kernel System, the Swedish Ida system, the UK Energy Kernel System, and the French ZOOM program.) and consider the relationship of these environments to recent R&D initiatives in design integration (the COMBINE project in Europe and the AEDOT project in the US).
series	other
last changed	2003/11/21 15:16

_id	85f9
authors	Brisson, E., Debras, P. and Poyet, Patrice
year	1991
title	A First Step Towards an Intelligent Integrated Design System in the Building Field
source	computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered pages : ill. includes bibliography
summary	This article presents the work the Knowledge Base Group is achieving towards the integration of Artificial Intelligence based facilities in the Building design process. After an overview of the current state of the integrated design process, the context and the technical guidelines to realize computer integrated software in the building design field is described. Then some tools are presented to model the knowledge (the HBDS method) and to implement such model in our Mips home-made knowledge modeling software platform (including object-oriented database management facilities, expert system reasoning facilities, hypertext edition facilities, 3D-design and 3D-view modules...). Finally the authors describe the Quakes application devoted to assess detached house anti-seismic capabilities during the design process. A deep conceptual model considers all the semantic entities (columns, resistant panels, openings, ...) involved in the anti-seismic expertise. Using both this conceptual model description of a detached house and the 3D design tool, they input the project. Then the seismic expertise is driven in a divide and conquer approach and records the alleged configuration recognized automatically linked to the corresponding section of the building regulation
keywords	AI, design, knowledge, software, integration, building, CAD, structures
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2016_710
id	sigradi2016_710
authors	Duarte, Rovenir Bertola; Lepri, Louisa Savignon; Sanches, Malu Magalh?es
year	2016
title	Objectile e o projeto paramétrico [Objectile and parametric design]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.149-156
summary	The objectile was a concept developed by Deleuze and Cache in the 80s. It treats the object as a variable and anticipates the society of obsolescence, an inquiry about the contemporary life of the object (marketing, function, representation, modeling, production and consumption). This concept deals with the object where“... fluctuation of the norm replaces the permanence of a law; where the object assumes a place in a continuum by variation” (Deleuze, 1991, p.38). This paper proposes to think objectile as the object of the architectural design, on three types of approximations between design and objectile: (a) Objectile as variable of the design, (b) Objectile as a design variable, and (c) Objectile as architecture (variable architecture). The second approximation (b) enables to discuss the conception of continuous design with power to cross other projects - a meta-design. The main aspect of this meta-design is the variability, another way of control based on concepts of patterns and modulations; however, objectile can mean the release of mind for new types of thought and new kinds of design based on “continuum by variation”: meta-design.
keywords	Objectile; parametric design; Gilles Deleuze; Modulado; Digital design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	a607
authors	Durisch, Peter and Anderheggen, Edoardo
year	1991
title	Leaving the Planar Universe
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 521-534
summary	A computer program is presented which generates realistic images of planned buildings embedded in their future environment through photomontage. The planar universe of conventional photomontaging is extended to three dimensions. During an interactive preprocessing step, a three- dimensional model of the building's environment is created: Geometrical data is retrieved photogrammetrically from a number of site photographs. Atmospheric parameters and the relative weights of the components of natural daylight are also retrieved from the photographs. The final image, combining the artificial model of the building and the photographs of its surroundings, is rendered by an extended ray-tracing algorithm in three-dimensional object space.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	6f3e
authors	Eastman, Charles M. and Lang, Jurg
year	1991
title	Experiments in Architectural Design Development Using CAD
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 49-64
summary	The need to explore development techniques in computer-based design is reviewed. Some premises are given for design development using computers, including integrating multiple representations, the use of object-based modeling and the importance of visual analysis and 3-D modeling. We then present techniques used in a UCLA design studio that explored methods of computer-based design development based on these premises. The two main methods used were hierarchical object structures and multi-representational coordination. They were applied using conventional CAD systems. Some lessons learned from this class are reviewed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	673a
authors	Fukuda, T., Nagahama, R. and Sasada, T.
year	1997
title	Networked Interactive 3-D design System for Collaboration
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 429-437
doi	https://doi.org/10.52842/conf.caadria.1997.429
summary	The concept of ODE (Open Design Environment) and corresponding system were presented in 1991. Then the new concept of NODE. which is networked version of ODE. was generated to make wide area collaboration in 1994. The aim of our research is to facilitate the collaboration among the various people involved in the design process of an urban or architectural project. This includes various designers and engineers, the client and the citizens who may be affected by such a project. With the new technologies of hyper medium, network, and component architecture, we have developed NODE system and applied in practical use of the collaboration among the various people. This study emphasizes the interactive 3-D design tool of NODE which is able to make realistic and realtime presentation with interactive interface. In recent years, ProjectFolder of NODE system, which is a case including documents, plans, and tools to proceed project., is created in the World Wide Web (WWW) and makes hyper links between a 3-D object and a text, an image. and other digital data.
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: