Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 178

Reformat results as: short short into frame detailed detailed into frame

_id	019c
authors	Beyer, Horst A. and Streilein, André
year	1991
title	Data Generation for CAAD with Digital Photogrammetry
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 583-594
summary	The rapid advances in sensor technology and processing hardware make the development of a Digital Photogrammetric System for Architectural Photogrammetry possible. This system is able to acquire images with sufficient resolution for Architectural Photogrammetry. Geometric and topologic information for a CAAD-System can be derived with manual and/or semi-automated methods. This paper describes the current status of such a system which is under development at the Institute of Geodesy and Photogrammetry in cooperation with the Chair of Architecture and CAAD, both at the Swiss Federal Institute of Technology in Zurich.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	maver_070
id	maver_070
authors	Maver, T.W. and Petric, J.
year	1991
title	Computer Aided Architectural Design: The Next Generation
source	Proceedings of ICOGRAPHICS 91, Milan
summary	Currently there is very rapid progress in the development of computer based techniques for the visual simulation of those environments which are physically inaccessible. Three such developments are discussed advanced lighting models, interactive animation and virtual reality. The paper then proposes, in the context of building design, a more technically comprehensive approach to experiencing architectural space.
series	other
email
last changed	2003/09/03 15:01

_id	27d2
authors	Ayrle, Hartmut
year	1991
title	Computers for Architects - Only a Tool?
doi	https://doi.org/10.52842/conf.ecaade.1991.x.i9j
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	The paper states that, as a result of the schism between architecture as art and engineering as rationalism, the architectural community underestimates the computer as tool with a potential to substantially enlarge the possibilities of building design. It is claimed that the computer could serve as coordination tool for the ruptured design process, as a virtual workbench where all design disciplines sit together and develop their designs in enhanced conscience of what the whole design demands. The paper then concludes, that to develop such software tools, architects must participate in the development of software and may no longer be restricted to the role of applicants, especially during their universitary instruction. The corresponding research and training facilities at the University of Karlsruhe, Faculty of Architecture are described.
series	eCAADe
last changed	2022/06/07 07:50

_id	ac81
authors	Brown, A.G.P.
year	1991
title	Review of Building IT 2000
doi	https://doi.org/10.52842/conf.ecaade.1991.x.q2c
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	Building IT2000 is a Building and Information Technology database which is presented in Hypertextformat. Its production has been co-ordinated by the CICA (the Construction Industry Computer Association), an independent association serving the needs of computer users, specifiers and suppliers in the Construction Industry. The stack is a collection of structured information prepared by a group of experts in computing and the construction industry. As such it represents an interesting advance from two points of view: (1.) It is a valuable source of information in its own right. It could provide a resource for students of architecture which could be used as a self-teaching package. (2.) It points a possible way forward for the development of similar hypertext based teaching packages which could be developed by academics within the European teaching community.
series	eCAADe
email
more	http://www.mediatecture.at/ecaade/91/brown.pdf
last changed	2022/06/07 07:50

_id	eaca
authors	Davis, L. (ed.)
year	1991
title	Handbook of genetic algorithms
source	Van Nostrand Reinhold, New York
summary	This book sets out to explain what genetic algorithms are and how they can be used to solve real-world problems. The first objective is tackled by the editor, Lawrence Davis. The remainder of the book is turned over to a series of short review articles by a collection of authors, each explaining how genetic algorithms have been applied to problems in their own specific area of interest. The first part of the book introduces the fundamental genetic algorithm (GA), explains how it has traditionally been designed and implemented and shows how the basic technique may be applied to a very simple numerical optimisation problem. The basic technique is then altered and refined in a number of ways, with the effects of each change being measured by comparison against the performance of the original. In this way, the reader is provided with an uncluttered introduction to the technique and learns to appreciate why certain variants of GA have become more popular than others in the scientific community. Davis stresses that the choice of a suitable representation for the problem in hand is a key step in applying the GA, as is the selection of suitable techniques for generating new solutions from old. He is refreshingly open in admitting that much of the business of adapting the GA to specific problems owes more to art than to science. It is nice to see the terminology associated with this subject explained, with the author stressing that much of the field is still an active area of research. Few assumptions are made about the reader's mathematical background. The second part of the book contains thirteen cameo descriptions of how genetic algorithmic techniques have been, or are being, applied to a diverse range of problems. Thus, one group of authors explains how the technique has been used for modelling arms races between neighbouring countries (a non- linear, dynamical system), while another group describes its use in deciding design trade-offs for military aircraft. My own favourite is a rather charming account of how the GA was applied to a series of scheduling problems. Having attempted something of this sort with Simulated Annealing, I found it refreshing to see the authors highlighting some of the problems that they had encountered, rather than sweeping them under the carpet as is so often done in the scientific literature. The editor points out that there are standard GA tools available for either play or serious development work. Two of these (GENESIS and OOGA) are described in a short, third part of the book. As is so often the case nowadays, it is possible to obtain a diskette containing both systems by sending your Visa card details (or $60) to an address in the USA.
series	other
last changed	2003/04/23 15:14

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
doi	https://doi.org/10.52842/conf.ecaade.2010.815
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
wos	WOS:000340629400087
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	9964
authors	Augenbroe, G. and Winkelmann, F.
year	1991
title	Integration of Simulation into the Building Design Process
source	J.A. Clarke, J.W. Mitchell, and R.C. Van de Perre (eds.), Proceedings, Building Simulation '91 IBPSA Conference, pp. 367-374
summary	We describe the need for a joint effort between design researchers and simulation tool developers in formulating procedures and standards for integrating simulation into the building design process. We review and discuss current efforts in the US and Europe in the development of next-generation simulation tools and design integration techniques. In particular, we describe initiatives in object-oriented simulation environments (including the US Energy 'Kernel System, the Swedish Ida system, the UK Energy Kernel System, and the French ZOOM program.) and consider the relationship of these environments to recent R&D initiatives in design integration (the COMBINE project in Europe and the AEDOT project in the US).
series	other
last changed	2003/11/21 15:16

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	227a
authors	Bourdeau, L., Dubois, A.-M. and Poyet, P.
year	1991
title	A Common Data Model for Computer Integrated Building
source	computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered : some ill. includes bibliography
summary	The connection of various building performance evaluation tools in a collaborative way is an essential request to develop true CAD systems. It is a basic requirement for the future of integrated information systems for building projects, where data concerning multiple aspects of the project can be exchanged during the different design steps. This paper deals with the on-going research concerning the generation of a common data model in the framework of a European collaborative action, the COMBINE Project, which is supported by the CEC, General Directorate XII for Research Science and Development, within the JOULE programme. The first step of the research concerns the progressive construction of a conceptual model and the paper focuses on the development of this Integrated Data Model (IDM). The paper reports on the definition of the architecture of the IDM. The main issues and the methodology of the IDM development are presented. The IDM development methodology is based on successive steps dealing with the identification of the data and context which are considered by the Design Tool Prototypes (DTP) to be connected through the IDM, the conceptual integration of this knowledge, and the implementation of the model on an appropriate software environment
keywords	standards, integration, communication, building, evaluation, modeling
series	CADline
last changed	2003/06/02 14:41

_id	0b1c
authors	Bridges, Alan
year	1991
title	Computer Exercises in Architectural Design Theory
doi	https://doi.org/10.52842/conf.ecaade.1991.x.f9w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	This paper discusses how architectural theory may be taught using computer based exercises to explore the practical application of those theories. The particular view of architecture developed is, necessarily, a restricted one but the objectives behind the exercises are slightly different to those that a pure architectural theorist or historian might have The formal teaching of architectural theory and composition has not been very fashionable in Schools of Architecture for several years now: indeed there is a considerable inbuilt resistance in students to the application of any form of rules or procedures. There is however a general interest in computing and this can be utilised to advantage. In concentrating on computer applications in design eclectic use has been made of a number of architectural examples ranging from Greek temples to the work of modern deconstructionists. Architectural theory since Vitruvius is littered with attempts to define universal theories of design and this paper certainly does not presume to anything so grand: I have merely looked at buildings, compared them and noted what they have in common and how that might relate to computer-aided design. I have ignored completely any sociological, philosophical or phenomenological questions but would readily agree with the criticism that Cartesian rationality is not, on its own, a sufficient base upon which to build a theory of design. However I believe there is merit in articulating design by separating it from other concerns and making it a subject of study in its own right. Work in design research will provide the models and intellectual structures to facilitate discourse about design and might be expected to benefit the development of design skills by providing material that could be formally taught and debated in a way that is removed from the ephemeral "fashionable designer" debate. Of course, some of the ideas discussed here may prove to be equally ephemeral but that does not entirely negate their value.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	c81f
authors	Chandansing, R.A. and Vos, C.J.
year	1991
title	IT - Use in Reinforced Concrete Detailing : The Current State, a Forecasting-Model, and a Future-Concept
source	The Computer Integrated Future, CIB W78 Seminar. september, 1991. Unnumbered : ill., tables. includes bibliography
summary	This paper describes the current state in the Netherlands, concerning the levels of CAD-systems used, their diffusion in practice and constraints and effects of their use for reinforced concrete detailing. An initial forecasting model for the further development of IT in the concrete construction industry and a future-concept for IT-use in reinforced concrete detailing are presented as well
keywords	CAD, structures, engineering, building, practice, systems, detailing, construction
series	CADline
last changed	2003/06/02 13:58

_id	00bc
authors	Chen, Chen-Cheng
year	1991
title	Analogical and inductive reasoning in architectural design computation
source	Swiss Federal Institute of Technology, ETH Zurich
summary	Computer-aided architectural design technology is now a crucial tool of modern architecture, from the viewpoint of higher productivity and better products. As technologies advance, the amount of information and knowledge that designers can apply to a project is constantly increasing. This requires development of more advanced knowledge acquisition technology to achieve higher functionality, flexibility, and efficient performance of the knowledge-based design systems in architecture. Human designers do not solve design problems from scratch, they utilize previous problem solving episodes for similar design problems as a basis for developmental decision making. This observation leads to the starting point of this research: First, we can utilize past experience to solve a new problem by detecting the similarities between the past problem and the new problem. Second, we can identify constraints and general rules implied by those similarities and the similar parts of similar situations. That is, by applying analogical and inductive reasoning we can advance the problem solving process.The main objective of this research is to establish the theory that (1) design process can be viewed as a learning process, (2) design innovation involves analogical and inductive reasoning, and (3) learning from a designer's previous design cases is necessary for the development of the next generation in a knowledge-based design system. This thesis draws upon results from several disciplines, including knowledge representation and machine learning in artificial intelligence, and knowledge acquisition in knowledge engineering, to investigate a potential design environment for future developments in computer-aided architectural design. This thesis contains three parts which correspond to the different steps of this research. Part I, discusses three different ways - problem solving, learning and creativity - of generating new thoughts based on old ones. In Part II, the problem statement of the thesis is made and a conceptual model of analogical and inductive reasoning in design is proposed. In Part III, three different methods of building design systems for solving an architectural design problem are compared rule-based, example-based, and case-based. Finally, conclusions are made based on the current implementation of the work, and possible future extensions of this research are described. It reveals new approaches for knowledge acquisition, machine learning, and knowledge-based design systems in architecture.
series	thesis:PhD
email
last changed	2003/05/10 05:42

_id	cdb1
authors	Cornick, T., Noble, B. and Hallahan, C.
year	1991
title	The Limitations of Current Working Practices on the Development of Computer Integrating Modelling in Construction
source	computer Integrated Future, CIB W78 Seminar. Calibre, The Netherlands: Eindhoven University of Technology, september, 1991. Unnumbered. includes bibliography
summary	For the construction Industry to improve its processes through the application computer-based systems, traditional working practices must first change to support the integrated control of design and construction. Current manual methods of practice accept the limitations of man to process a wide range of building performance and production information simultaneously. However when these limitations are removed, through the applications of computer systems, the constraints of manual methods need no longer apply. The first generation of computer applications to the Construction Industry merely modelled the divided and sequential processes of manual methods i.e. drafting, specification writing, engineering and quantity calculations, estimating, billing, material ordering data-bases and activity planning. Use of these systems raises expectations that connections within the computer between the processes modelled can actually be made and faster and more integrated information processing be achieved. 'Linking' software is then developed. The end result of this approach was that users were able to produce information faster, present it in an impressive manner but, in reality, no perceived improvement in actual building performance, production economy or efficiency was realized. A current government sponsored Teaching Company Programme with a UK design and build company is addressing the problem of how real economic benefit can be realized through improvement in, amongst other things, their existing computer applications. This work is being carried out by both considering an academic conceptual model of how 'designing for production' can be achieved in computer applications and what is immediately realizable in practice by modelling the integration of a limited number of knowledge domains to which computers are already being applied. i.e. billing from design, estimating and buying. This paper describes each area of work and how they are impacting on each other
keywords	construction, building process, integration
series	CADline
last changed	2003/06/02 13:58

_id	2e56
authors	Coyne, Robert Francis
year	1991
title	ABLOOS : an evolving hierarchical design framework
source	Carnegie Mellon University, Department of Architecture
summary	The research reported in this thesis develops an approach toward a more effective use of hierarchical decomposition in computational design systems. The approach is based on providing designers a convenient interactive means to specify and experiment with the decompositional structure of design problems, rather than having decompositions pre-specified and encoded in the design system. Following this approach, a flexible decomposition capability is combined with an underlying design method to form the basis for an extensible and evolving framework for cooperative (humdcomputer) design. As a testbed for this approach, the ABLOOS framework for layout design is designed and constructed as a hierarchical extension of LOOS.’The framework enables a layout task to be hierarchically decomposed, and for the LOOS methodology to be applied recursively to layout subtasks at appropriate levels of abstraction within the hierarchy; layout solutions for the subtasks are then recomposed to achieve an overall solution, Research results thus far are promising: ABLOOS has produced high quality solutions for a class of industrial layout design tasks (an analog power board layout with 60 components that have multiple complex constraints on their placement); the adaptability of the framework across domains and disciplines has been demonstrated; and, further development of ABLOOS is underway including its extension to layouts in 2 1/2D space and truly 3D arrangements. The contribution of this work is in demonstrating an effective, flexible and extensible capability for hierarchical decomposition in design. It has also produced a more comprehensive layout system that can serve as a foundation for the further investigation of hierarchical decomposition in a variety of design domains.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	6f3e
authors	Eastman, Charles M. and Lang, Jurg
year	1991
title	Experiments in Architectural Design Development Using CAD
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 49-64
summary	The need to explore development techniques in computer-based design is reviewed. Some premises are given for design development using computers, including integrating multiple representations, the use of object-based modeling and the importance of visual analysis and 3-D modeling. We then present techniques used in a UCLA design studio that explored methods of computer-based design development based on these premises. The two main methods used were hierarchical object structures and multi-representational coordination. They were applied using conventional CAD systems. Some lessons learned from this class are reviewed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	218a
authors	Ervin, Stephen M.
year	1991
title	Intra-Medium and Inter-Media Constraints
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 365-380
summary	Designers work with multiple representations in a variety of media to express and explore different kinds of knowledge. The advantages of multi-media in design are well- known, and exemplified by the current interest in 'hyper-media' approaches to knowledge exploration. A principal activity in working between views in one medium (e.g. plan, section and perspective drawings), or between different representations (diagrams, maps, graphs, pictures, e.g.) is extrapolating decisions made in one view or medium over to others, so that some consistency is maintained, and implications can be explored. The former kind of consistency maintenance (intra-medium) is beginning to be well understood techniques for constraint expression., satisfaction and propagation are starting to appear in 'smart CAD' systems. The latter kind of consistency maintenance inter-media.) is different, less well understood, and will require new mechanisms for constraint management and exploration. Experiments, hypotheses, and solutions in this direction will be central to any effort that seeks to explain, emulate or assist the integrative, synthetic reasoning that characterizes environmental design and planning. This paper examines some of the characteristics and advantages of intra and inter-media constraint exploration, describes a prototype "designers workstation" and some experiments in the context of landscape planning and design, and lays out some directions for development of these ideas in future computer aided design systems.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	0457
authors	Fereshetian, Nirva and Eastman, Charles M.
year	1991
title	A Comparison of Information Models for Product Design
source	Computer Integrated Future, CIB W78 Seminar. Calibre, The Netherlands: Eindhoven University of Technology, September, 1991. Unnumbered. includes bibliography
summary	This paper develops the data modeling requirements for modeling products, as required for the development of integrated databases in architecture and construction. These requirements are then applied to four data models: Entity- Relationship Model, NIAM, IDEF1x and EDM
keywords	building, modeling, integration, systems, database, construction
series	CADline
email
last changed	2003/05/17 10:15

For more results click below: